Install and Verify throws Expected ';' for New install
When I install Java it goes through fine, but when I click finish for it to launch the JavaFx install it gives me an error dialog that says:
"Microsoft JScript compilation error"
Expected ';'
I press OK and it gives me the dialog error again, after a second OK it goes away.
I went to Java.com to verify install and I get the same thing as this screen shot shows (http://www.flickr.com/photos/dustindamour/3365219657/). I thought it was a corrupt install from the update that took place, so I uninstalled all Java and reinstalled. It still gives me the Error Dialog and in addition it gives me the red x box for applets now.
My main interest is to get this working so that I can go through the new tutorials examples at JavaFx.com.
If anyone can help me resolve this problem I would appreciate it.
Caxi wrote:
I click finish for it to launch the JavaFx install
If anyone can help me resolve this problem I would appreciate it.As a guess asking on a JavaFx forum might lead to a solution.
Thus some forum besides this one.
Similar Messages
-
If connect iPad to my TV every time the clip is finished I have to disconnect and reconnect the iPad for new clip playing.
1. Why don't you purchase it from Apple? I'd be wary with eBay sellers - and, after all, Apple posts their stuff everywhere, even if you live in a country without a localized Apple store webpage or local (physical) Apple stores.
2. when it comes to adapters / cables like these, NEVER purchase ANYTHING non-Apple-manufactured! Most of the cheap(er) knock-offs don't work! That is, don't try to save on going for a cheaper alternative - it most likely won't work.
Here are the links:
http://store.apple.com/us/product/MD098ZM/A
http://store.apple.com/us/product/MC552ZM/B -
i have a 2006 imac (intel) w osx 10.4.11 and need to update for new ipod touch? software updates says up to date, but itunes requires 10.5 or higher? any solutions?
i have a 2006 imac (intel) w osx 10.4.11 < Tiger
It's not just iTunes you need to update...
You need to upgrade to Leopard v10.5.8 at the very least in order to sync, restore, and backup an iPod touch.
See iPod touch system requirements here.
Leopard is available from Amazon here. -
I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done?
Have you tried repairing disk permissions : iTunes download error -45054
-
Hi i need help i have got a second hand ipod touch generation 4 how can i delete all of the previous owners stuff and set it up for myself to use for facetime etc
Just restore it. When it gets to the point that asks you if you want to restore from back up or set up as new, select new.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
How to set a default start and/or end date for New Events based on trigger date.
I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}* -
MIRO and MIGO number range for new financial year
All SAP Gurus,
We want same number range to be continued for MIGO and MIRO documents.
Is it needed to create the number range for MIGO and MIRO for new financial year or same number range will be continued automatiaclly?
Regards,hi,
The number range to be applied for the MIGO And MIRO documents depends on the YEAR which you have feed while maintaining the number range...If you want a new number range for next year, then you can maintain it from above transactions...Or if you wanna continue wid the same then can use the same number range as well...
As suggested maintain the number range get it applied, but remember if you maintain the number range as 2010 then that number range will be valid for the given year only...but if you give the number range 9999 then it will be valid upto 9999 year...
Hope it helps..
Regards
Priyanka.P -
I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T. I have an IMac on order but don't have it here yet.
My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
Where do I start?
Which device connects to my modem first, the TC2 or the Netgear?
Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
Thanks.It is pretty simple..
Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
v6 will be as
With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard. -
Droid DNA running version 4.4.2
Google maps says GPS signal lost and GPS software shows that there are no active satellites located.
Thinking that it was a bug in the software I had the phone check for software updates and it is now stuck with the message "checking for new software for your HTC HTC6435LVW". Phone still works but the message keeps reappearing.
I have powered the phone off, removed the sim card, reinserted the sim card and powered the phone back up but that did not help. What next?Never fear, help is here Citadel_1974! I would be delighted to help out today. Have you attempted to process a full restore/reset on the device? If not, please complete and reconnect with us on the outcome. We look forward to hearing from you soon, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT -
We've got a small handful of Windows 8.1 Pro workstations on our domain (SBS 2008).
The workstations show up in the WSUS Console list along with the details of how many updates need to be installed.
On the Windows 8.1 Pro workstations, at the logon screen they display "Important Updates Are Available. Go to PC Settings to install them". If we go to PC Settings or Windows Updates via Control Panel the updates show as awaiting installation.
However, we can't rely on users to go into PC Settings or Control Panel to install Windows Updates. We need them to be installed as per Windows 7 and Windows XP - whereby when the user shuts down their workstations it displays the message "Install Updates
and Shutdown".
Currently the Windows 8.1 Pro workstations do not show this - if you choose to shut down there are no update installation messages and the workstations simply shut down.
Has anyone else encountered this? What needs to be done?
Thanks in advance.
I don't work for Microsoft - I just use their products.It does sound weird yes.
Id like to try and mirror your setup in my lab.
What settings do you have in your WSUS GPO?
Have you seen this, in the 'Configure Automatic Updates' setting?
On Windows 8 and later, you can set updates to install during automatic maintenance instead of a specific schedule. Automatic maintenance will install updates when the computer is not in use, and avoid doing so when the computer
is running on battery power. If automatic maintenance is unable to install updates for 2 days, Windows Update will install updates right away. Users will then be notified about an upcoming restart, and that restart will only take place if there is no potential
for accidental data loss.
Automatic maintenance can be further configured by using Group Policy settings here: Computer Configuration->Administrative Templates->Windows Components->Maintenance Scheduler
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
does anyone else have the same problem??
I did! Just make sure when you're updating, to be connected to power!
-
Need software download of Quicktime 7.5.5 for itunes for Mac OSv. 10.5.8 so I can use new ipad. Can't find download for it. Any help is gratefully accepted
OS X 10.5.x is Leopard and not Panther - wrong cat I am afraid!
-
When is a topic considered to be "old" and no longer meant for new posting?
I decided to make this a topic, so hopefully future posters can also benefit from my ignorance. Therefore I sincerely hope that this topic will become a sticky note.
Today I was "reprimanded" for posting in thread https://forum-en.msi.com/index.php?topic=165987.msg1232608#msg1232608, because it's inactive for 2 months and considered to be of no more interest to the OP. I find that last part somewhat presumptuous, because I think that only the OP can decide whether it's of interest to him or not.
Call me stupid, but I don't understand why posting in a somewhat older thread is considered to be a problem, inappropriate or forbidden. Where exactly is the harm in that?
The forum rules do not explain when a topic is considered to be too old for posting, therefore leaving room for personal interpretation.
And if topics are no longer meant for posting, why aren't they closed by the moderators?
So please be more specific on this matter and enlighten us naive and ignorant souls .Quote from: brtj on 26-April-13, 12:06:38
Read the warning carefully. It clearly states:
Unless you're sure you want to reply[...]
So if I am certain I want to reply I am allowed to!
That's not ignoring the warning, that's making a decision based upon it!
Perhaps you should also adjust the warning and make it a little more strict, like:
Warning: this topic has not been posted in for at least 60 days.
Posting in this topic could be interpreted as resurrecting the topic, which violates our forum rules.
Please consider starting a new topic.
This way you politely discourage it even more and at the same time you provide an explanation by reffering to the forum rules.
And also make sure that the time span in the forum rules and the warning match with each other to prevent confusion.
Disagree with that one. If wanting to nit-pick, maybe it should read 'Please Start A New Topic'. No 'consider' as an option at all.
Maybe something less subtle and full of sarcasm more akin to this;
START NEW THREADS UNLESS EVERY DETAIL, SYMPTOM, AND COMPONENT OF YOUR SYSTEM IS IDENTICAL TO THE OP'S!
Give an option and take somebody off a leash, they will pick the easy path almost every time. How difficult is it to start a new thread and get individualized personal attention?
I can see when new information may become available 'after' a considerable amount of time has passed that may add value to an old thread, but too many hijack and don't even have the same mainboard, etc. A moderator could be asked to possibly include relevant information to a locked thread.
Quote
This way you politely discourage it even more and at the same time you provide an explanation by reffering to the forum rules.
Has someone's feelings been hurt? Sounds like something straight from a political correctness handbook regarding the guidelines concerning self esteem, tolerance, diversity, and sensitivity! -
Software that is missing and a easy guide for new use
Somtimes, when we have a mp3, it just has the file name as information. So when we upload a whole bunch of mp3 files sorted for {0} until 999, or A until Z. Now when I want to upload it i fireup the zen micromanger explorer thingie, I create a new map, then I select my files copy > paste in the zen micromanger explorer thing and wait until it has uploaded. Then I add it to the playlist.
Now the problem! A lot of them don't sort automaticly in playlist while they are fine in the uploaded map(i.e in sequence). Why does this differ, and how does one fix this? What steps are exactly required to fix this?joefso wrote:
Somtimes, when we have a mp3, it just has the file name as information. So when we upload a whole bunch of mp3 files sorted for {0} until 999, or A until Z. Now when I want to upload it i fireup the zen micromanger explorer thingie, I create a new map, then I select my files copy > paste in the zen micromanger explorer thing and wait until it has uploaded. Then I add it to the playlist.
Now the problem! A lot of them don't sort automaticly in playlist while they are fine in the uploaded map(i.e in sequence). Why does this differ, and how does one fix this? What steps are exactly required to fix this?
up -
How to read and set Pane value for new adding folder
Hi Experts,
I tried to add a new folder in to a system form as below
Itm = form.Items.Add("UserFolder"), SAPbouiCOM.BoFormItemTypes.it_FOLDER)
form.DataSources.UserDataSources.Add("F_new", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 1)
Dim oFolder As SAPbouiCOM.Folder
oFolder.DataBind.SetBound(True, "", "F_new")
oFolder.GroupWith("138")
My quester is what is the panelevel for this new folder? And how to set value to panelevel for this folder.
If we design a folder from Screen Painter, we can set the pane value manually, can we do this from code?
Thanks a lot
TimHello,
You do not have to set any panelevel for your folder, if you would like to display it all the panelevels. (Let's see an example on Item Master data form).
Sales, Purchase, Inventory etc tabs (folders) are always visible, there is no panelevel set for them.
To change between panelevels, you can trigger et item pressed event, and before_action = false, then you may change the panelevel of the form poperly.
For initially you may use the Folder.Select() command to show the default panelevel
>The problem is here, it looks like oFrom.Panelevel property can only accept integer value, so how can I know what's the pane level number for my folder?
Do not set panelevel for your folders, you should drive your form's panelevel based on a selection tree:
To see clear, please check the following code in the help sample: CompexForm
C:Program FilesSAPMásolat - SAP Business One SDKSamplesCOM UIVB.NET07.ComplexForm2003
to make it clear:
'// Adding Folder items
For i = 1 To 2
oItem = oForm.Items.Add("Folder" & i, SAPbouiCOM.BoFormItemTypes.it_FOLDER)
oItem.Left = (i - 1) * 100
oItem.Width = 100
oItem.Top = 6
oItem.Height = 19
oFolder = oItem.Specific
'// set the caption
oFolder.Caption = "Folder" & i
oFolder.DataBind.SetBound(True, "", "FolderDS")
If i = 1 Then
oFolder.Select()
Else
oFolder.GroupWith(("Folder" & i - 1))
End If
Next i
This code add 2 folders to the form: and the first (i = 1) is selected.
IN itemevent, the panelevel property of the form is depending from the item you have clicked:
Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
'// Check if the event was raised by one of the Folder items
'// and change the form's pane level
If pVal.ItemUID = "Folder1" Then
oForm.PaneLevel = 1
End If
If pVal.ItemUID = "Folder2" Then
oForm.PaneLevel = 2
End If
Regards
János
Maybe you are looking for
-
Been building web pages for nearly 20 years, starting with GoLive. Went to Dreamweaver about 12 years ago, the Macromedia version. Tried going to iWeb when it came with a new Mac, but found it way too limiting with it's CSS template base. Unknowl
-
my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the prima
-
BI Publisher and Presentation services integration
Hi, I have configured BI publisher and done the presentation services integration also. When I try to build a query by connecting to RPD, I am able to generate a query and design the report. But when I select BI Answers as a data source, I am not lis
-
Dynamic webdynpro context mapping in GP
Hi Experts, I have created a webdynpro coponent which contains a Dynamic node as a Gp context Output parameter. This Dynamic node is mapped to another WD callable object's GP context input parameter. Will i be able to transfer data using this dynamic
-
Is there an app that Apple provides since they have blocked access to download adobe flash player for my IPad 2?