Install Builder error

Error message from Install Build
LabView 2014 on Windows 7
What might this mean?
Call Library Function Node in NI_MDF.lvlib:MDFProdInfoList_Close.vi->CDK_DistParts_GetInstalledProducts_CORE.vi->CDK_DistParts_GetInstalledProducts.vi->CDK_Validate_DistParts_2010.vi->IB_MSI.lvclass:Engine_PreBuild.vi->IB_MSI.lvclass:Build.vi->CDK_Engine_Main.vi->CDK_Build_Invoke.vi->CDK_Build_Invoke.vi.ProxyCaller

It means it's broke,,, 
Seriously though folks, this sort of error can unfortunately occur because it is possible for you to create an application that will build correctly, and the standalone will even operate, but you can't build an installer for it. What is the error number you are getting?
I have seen this sort of error arise for a variety of reason -- none of which make any kind of logical sense:
A VI that isn't being used but is in a library that is being used, is broken 
A VI that isn't being called is missing from a library that isn't being directly used
Broken code in disable cases of conditional enable and disable structures
Basically, a good place to start is to go through the "Dependencies" and fix anything that shows up as broken -- even if it has nothing to do with your current application.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

  • Install build# 9860 error 0x80240016

    hi
    I am trying to install build 9860 from my Windows 10 build 9841 although I receive the error bellow, I have tried the installation many times.
    "Failed to install the new preview build. Please try again later. 0x80240016"

    Hi ErfanTaheri,
    For this kind of issue, there would be many reasons to cause this failure. To find the reason, we can check the following log file:
    C:\$windows~BT\Source\Panther\setupact.log
    Here we can get an information about the failure.
    Alex Zhao
    TechNet Community Support

  • Itunes install issues error 7 - Windows error 193

    Gents,
    I am using Windows 7, had iTunes for years no issues I couldn't solve myself, this time I need help.
    When the last update of iTunes came on, I tried to update my version but couldn't do the update (I don't remember the error message details, it just said that I had to re-install iTunes).
    So I cleared ITunes and all Apple related softwares from my computer (yes in the recommended order, and yes I rebooted in between) tried to re-installed (numerous times) and I always get the same error messageS:
    "Couldn't install ITunes Error 7 (Windows error 193)" and also "ITunes helper was not installed correctly"
    When running the installer I get the error message "Apple Mobile device failed to start", even if I ignore this message during the install, I am unable to open iTunes once the install is done. (the install goes through and says install finished).
    Note: I also tried to "fix" during the install, it didn't work.
    Context / Trials / Notes:
    - I tried to "repair" the Apple Mobile Device in programs (unsuccessfully)
    - I had 2 Apple Mobile Device services, so after a complete un-install and reboot, I manually (command prompt) remove the last service
    - In all my un-install attempts I went on the C: drive and made sure ALL folders were cleared of apple / iTunes traces. Delete ITunes setup file, empty the recycle bin of course, reboot etc)
    - Windows is up-to-date - No viruses (using Malwarebyte/ AVG & Spybot).
    I am at a loss, spent a lot of hours on the computer and on forums, but couldn't find the fix.
    I would greatly appreciate your help, this is getting on my nerves and I really need to change the music on my iphone ! (lol)
    thank you in advance

    If the above hasn't helped then for general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    Disabling your AV during installation may sometimes help.
    tt2

  • Report Generation Toolkit and Office 10 - build errors

    Using LabView 2011 and Report Generation Toolkit 2011.
    After installing Office 10, I would get build error for Excel-Print.Vi and Excel-SetCell.vi and build is then aborted.
    2011/vi.lib/addons/_office/_excelsub.llb/Excel-Print.vi.
    Says it is unable to save a vi without a block diagram.
    Uninstalled Office 10 and reinstalled Office 2003 and build went thru just fine.
    I can program using Excel 2003 and the compiled executable will work on another computer with Excel 2011 but once I install Office 10 on my LabVIEW computer I cannot build.
    Can't believe I could be the only one to experience this. Any workarounds?

    Duplicate Post

  • Error 7 Build Error - File not found

    I am trying to build my software to another computer over the network. I am able to  access the directory I am installing to and the program is not indicating any build errors(all VI's are not broken). This error only occurs when building. Any suggestions would be great.
    Thanks,
    Nate 
    The Build was unsuccessful
    Possible Reasons: An included VI or one of its dependencies does not exist. Open all  Startup/Exported/Dynamically called VIs, recompile them  (Ctrl-Shift Click the run arrow), and save them to update their dependencies.
      \\PAINESTORAGE\Engineering\Test & Manufacturing Software\AutoTest Software\Current Version\AutoTest ...
     Extended Details: Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
      Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Rule_Editor.vi -> EBUIP_Item_OnDoProperties.vi -> EBUIP_Item_OnDoProperties.vi.ProxyCaller
      Possible reason(s):
      LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    =========================
    NI-488:  Non-existent board.
    -Nate
    Solved!
    Go to Solution.

    Is there a way to see a report of the dynamically called VI's? I inherited this software and am relatively new to LabView...
    -Nate

  • Build Error while trying to import a dc from the track.

    Hi All,
              I  imported a Java perspective Dc from a track to local developement,
              When i tried to build locally developed dc, but i was getting a build error as
    "error reading C:\Documents and Settings
    .dtc\0\DCs\dc_ext_lib\_comp\gen\default\public\Excel_API\lib\java\Jexcel-install.jar; error in opening zip file"
    There was a error in opening the JExcel file.
    Any Ideas?
    Thanks,
    Anil

    Hi Anil,
    I think the jar file(Jexcel-install.jar) is zipped.Unzip the zar file from the folder......lib/java.
    Or else remove the jar file and import the application into NWDS,then add the jar externally from the NWDS.
    Make sure that the dc does not have any files.
    Once you import the dc rightclick on the prj-.properties-.add the external  jar file or directly place the jar file in java folder.
    Regards,
    Lavanya.G

  • Internal Build error after creating a new project

    I just installed Flex using the plugin install to Rational
    Software Architect v7.0 (Eclipse 3.2) on Windows. The system
    requirements page says Rational Software Architect is supported.
    when I create an MXML application, I immediate have an "Internal
    Build error has occurred message. It tells me to check the log
    file" But I'm not sure where that is.
    My MXML file only has the following code:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute">
    </mx:Application>

    Please see the suggested solutions in the following docs.
    Entity Maps Not Defined For Attachment Error When Selecting A Deliverable (Doc ID 358385.1)
    Corrupt Personalization - No Entities Found Entitymaps Not Defined For Attachment Item (Doc ID 1085011.1)
    R12:Supplier Page Unexpected Error: 'No Entities Found EntityMaps not Defined for Attachment Item' (Doc ID 1361320.1
    Geography Hierarchy No Entities Found, EntityMaps Not Defined For Attachment Item (Doc ID 831088.1)
    Depot Repair Bulk Receiving Error: "No entities found, entityMaps not defined for attachment item" (Doc ID 1357977.1)
    Thanks,
    Hussein

  • OAS 407 Build Error on RedHat 6.0

    Hi All,
    Furhter to my last post, can someone tell me if there is
    something I am missing here. Below is the build error I get
    when trying to build OAS407. I have RedHat 6.0 and I have made
    sure I have the latest glibc installed, based on the notes for
    the patch for oracle 8.0.5.1.
    Any information would be hugely appreciated.
    thanks
    Wayne
    Error during action 'Relinking executable dbsnmp'.
    Command: make -f ins_oemagent.mk idbsnmp
    i386-glibc20-linux-gcc -L/oracle/product/8.0.5/lib/ -
    L/oracle/product/8.0.5/lib/ -L/oracle/product/8.0.5/rdbms/lib -
    L/oracle/product/8.0.5/network/lib -o
    dbsnmp /oracle/product/8.0.5/network/lib/s0nmi.o /oracle/product/
    8.0.5/network/lib/waat0.o -lnmi -lnms -lnmd \
    lnms0 /oracle/product/8.0.5/rdbms/lib/defopt.o /oracle/product
    /8.0.5/rdbms/lib/ssdbaed.o \
    /oracle/product/8.0.5/lib/nautab.o /oracle/product/8.0.5/lib/naee
    t.o /oracle/product/8.0.5/lib/naect.o /oracle/product/8.0.5/lib/n
    aedhs.o `cat /oracle/product/8.0.5/lib/naldflgs` -lnetv2 -
    lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lclient -
    lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -
    lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -
    lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lepc -
    lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -
    lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -
    lnlsrtl3 `cat /oracle/product/8.0.5/lib/sysliblist` -ldl -lm -
    ltcl -lm -ldl -lc -lcrypt
    /oracle/product/8.0.5/lib//libcore4.a(lcd.o): In function
    `lcdprm':
    lcd.o(.text+0xacb): the `gets' function is dangerous and should
    not be used.
    /usr/lib/libtcl.so: undefined reference to `getgrnam@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `atexit@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `chown@@GLIBC_2.1'
    /usr/lib/libtcl.so: undefined reference to
    `__strtod_internal@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `rename@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strchr@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `fdopen@@GLIBC_2.1'
    /usr/lib/libtcl.so: undefined reference to
    `__ctype_tolower@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `localtime@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strcmp@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `fprintf@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `getenv@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `getservbyname@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strerror@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `getpwuid@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `getgrgid@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `memchr@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `gethostbyaddr@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `inet_ntoa@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `mkfifo@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `listen@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `tmpnam@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strftime@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strpbrk@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `stdout@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `stderr@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `abort@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `__xstat@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `setsockopt@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `time@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strstr@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `__lxstat@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strcspn@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `uname@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `__strtol_internal@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `__ctype_toupper@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `execvp@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strncmp@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `inet_addr@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `__environ@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `bind@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `memcpy@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `getsockname@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strrchr@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `endpwent@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `gethostbyname@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `getpwnam@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `exit@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `gmtime@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `sscanf@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `utime@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `memset@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `__ctype_b@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `_exit@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `__xmknod@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to
    `__strtoul_internal@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `endgrent@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `sprintf@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `__bzero@@GLIBC_2.0'
    /usr/lib/libtcl.so: undefined reference to `strcpy@@GLIBC_2.0'
    collect2: ld returned 1 exit status
    make: *** [dbsnmp] Error 1
    null

    Sorry, but officialy the OAS 4071 is not supported under RedHad 6
    (because of the glibc 2.1). We ran into the same problems. Oracle
    Support has no possibilities (in Germany) to build a version
    which runs under glibc21. We shall wait to version 4.08.
    I hope this will help you. Downgrade to RedHad 5.2 an it3s
    running.
    Greetings
    Sven
    George (guest) wrote:
    : Wayne Stanton (guest) wrote:
    : : Hi All,
    : : Furhter to my last post, can someone tell me if there is
    : : something I am missing here. Below is the build error I get
    : : when trying to build OAS407. I have RedHat 6.0 and I have
    : made
    : : sure I have the latest glibc installed, based on the notes
    for
    : : the patch for oracle 8.0.5.1.
    : : Any information would be hugely appreciated.
    : : thanks
    : : Wayne
    : : Error during action 'Relinking executable dbsnmp'.
    : : Command: make -f ins_oemagent.mk idbsnmp
    : : i386-glibc20-linux-gcc -L/oracle/product/8.0.5/lib/ -
    : : L/oracle/product/8.0.5/lib/ -
    : L/oracle/product/8.0.5/rdbms/lib -
    : : L/oracle/product/8.0.5/network/lib -o
    : dbsnmp /oracle/product/8.0.5/network/lib/s0nmi.o
    /oracle/product/
    : : 8.0.5/network/lib/waat0.o -lnmi -lnms -lnmd \
    : lnms0 /oracle/product/8.0.5/rdbms/lib/defopt.o
    /oracle/product
    : : /8.0.5/rdbms/lib/ssdbaed.o \
    : : /oracle/product/8.0.5/lib/nautab.o
    /oracle/product/8.0.5/lib/na
    : ee
    : t.o /oracle/product/8.0.5/lib/naect.o
    /oracle/product/8.0.5/lib/n
    : : aedhs.o `cat /oracle/product/8.0.5/lib/naldflgs` -lnetv2 -
    : : lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lclient -
    : : lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -
    : : lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -
    : : lnttcp -lnetwork -lclient -lvsn -lcommon -lgeneric -lepc -
    : : lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn
    : : lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -
    : : lnlsrtl3 `cat /oracle/product/8.0.5/lib/sysliblist` -ldl -
    : lm -
    : : ltcl -lm -ldl -lc -lcrypt
    : : /oracle/product/8.0.5/lib//libcore4.a(lcd.o): In function
    : : `lcdprm':
    : : lcd.o(.text+0xacb): the `gets' function is dangerous and
    : should
    : : not be used.
    : : /usr/lib/libtcl.so: undefined reference to
    : `getgrnam@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `atexit@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `chown@@GLIBC_2.1'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `__strtod_internal@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `rename@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strchr@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `fdopen@@GLIBC_2.1'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `__ctype_tolower@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `localtime@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strcmp@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `fprintf@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `getenv@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `getservbyname@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `strerror@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `getpwuid@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `getgrgid@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `memchr@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `gethostbyaddr@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `inet_ntoa@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `mkfifo@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `listen@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `tmpnam@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `strftime@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strpbrk@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `stdout@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `stderr@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `abort@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `__xstat@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `setsockopt@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `time@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strstr@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `__lxstat@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strcspn@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `uname@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `__strtol_internal@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `__ctype_toupper@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `execvp@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strncmp@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `inet_addr@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `__environ@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `bind@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `memcpy@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `getsockname@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strrchr@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `endpwent@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `gethostbyname@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `getpwnam@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `exit@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `gmtime@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `sscanf@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `utime@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `memset@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `__ctype_b@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to `_exit@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `__xmknod@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : : `__strtoul_internal@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    : `endgrent@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `sprintf@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `__bzero@@GLIBC_2.0'
    : : /usr/lib/libtcl.so: undefined reference to
    `strcpy@@GLIBC_2.0'
    : : collect2: ld returned 1 exit status
    : : make: *** [dbsnmp] Error 1
    : Is that bacause of the Glibc 2.1 and Glibc 2.0? I think OAS is
    : link with Glibc 2.0 not 2.1, so it does not work here.
    : I meet the same problem when I install webdb on RH6.0.
    : RGS
    null

  • Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly"  Error 7.....Help, please??

    Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library"  followed by "iTunes was not installed properly"  "Error 7".    Help, please??

    Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • E902: package could not be installed. Error in installing application

    Hi All,
    we try to deploy our first application(IPPhoneServicesTutorial)
    we do it using designer 2.4.2.009 on application server cuae
    2.4.2.009, and we get the following error:
    E902: package could not be installed. Error in installing application
    we check the application server log and this is the result:
    Full information as follows:
    Source: mscorlib
    Message: Value cannot be null.
    Parameter name: path1
    Stack Trace:
    at System.IO.Path.Combine(String path1, String path2)
    at
    Metreos.ApplicationFramework.Assembler.Assembler.DetermineWSE3Path()
    at Metreos.ApplicationFramework.Assembler.Assembler..cctor()
    2008:04:07::04:57:29(04): Error: AM
    Application 'IPPhoneServicesTutorial' installation failed:
    Application IPPhoneServicesTutorial failed to load.
    2008:04:07::04:57:35(10): Info: MCP Unable to connect to media
    server Media1 (127.0.0.1)
    2008:04:07::04:57:50(17): Info: MCP Unable to connect to media
    server Media1 (127.0.0.1)
    2008:04:07::04:58:05(17): Info: MCP Unable to connect to media
    server Media1 (127.0.0.1)
    2008:04:07::04:58:20(18): Info: MCP Unable to connect to media
    server Media1 (127.0.0.1)
    note that the media server service always stoped automatically

    Hi,
    I am also getting the same error. I did one sample application in cuad. when i try to build my project the following error came:
    Full error information as follows:
    Source: mscorlib
    Message: Value cannot be null.
    Parameter name: path1Stack Trace: System.String Combine(System.String, System.String)
    at System.IO.Path.Combine(String path1, String path2)
    at Metreos.Max.Framework.ProjectBuilder.PackageApplication()
    at Metreos.Max.Framework.MaxMainUtil.BuildProject(Int32& warningCount, Int32& errorCount)
    at Metreos.Max.Framework.MaxMain.OnBuildProject()
    Please help me regarding this.
    Thanks,
    Ajith

  • SSDT Build Error - SQL72001: File ... does not exist

    I am new to SSDT.  
    My general workflow is to use SQL Schema Compare (comparing the database to the project) to update an SSDT project. When the Compare ends up deleting some script files from the project, sometimes I got this error. 
    SQL72001: File "C:\TFS\Source\Dev\Testdb\dbo\Stored Procedures\usp_test.sql" does not exist.
    The symptom was that the script file was deleted, the script icon was removed from SSDT, this script was not referenced by any other script files,  but somehow TFS still showed the error
    when I built the project.
    The way i went around of the problem was to copy the file back to the file system, and added it to the project, make sure that the build was OK, and then delete the script and
    build again.
    I found an related post https://social.msdn.microsoft.com/Forums/en-US/44c186e8-5fd9-44fb-94f1-a8a139cbc9fd/vs2k13-build-errors?forum=ssdt, but it does not seem to be the same issue.
    I am using the free SSDT downloaded from Microsoft site. The SSDT version is  11.1.40403.0.
    I cannot find a button from the Visual Studio to check the update of SSDT. What is the proper way to keep SSDT updated? Should I manually download the installation file and install it?
    Thanks. 

    Hi Seaport, there are two things here:
    - Where is this failure occurring - when building in VS, from the command line, after a commit to TFS? The most likely cause of this build error is that the project changes have not been saved to disk. For example, if you manually delete a file from a project
    in VS then you need to save the project file for this change to be pushed to disk. The recommended solution is to ensure you save the project, or hit "Build" which should do this automatically.
    - Check for updates in VS2012 by clicking SQL -> Check For Updates... You can also go to our
    website and check the latest version from there. 
    Thanks,
    Kevin

  • Application builder error 1055

    ed. cross-post: http://lavag.org/topic/18047-application-builder-error-1055/
    Hello everyone
    I have a big problem with building applications lately. The build is running fine until the end, when it throws:
    Error 1055 occurred at Property Node in VISL_findDependentVISvr.vi->VISL_findAndProcessVISvrList.vi->VISL_detectAndCopyVISvr.vi->AB_Engine_Copy_CustomIOServer_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
    Possible reason(s):
    LabVIEW: Object reference is invalid.
    Has anyone seen this error in app builder? Does anyone have any idea how can I resolve this problem?

    Lennard, Valko
    I'm using LV 2013 f2. Let me give you some more details and... The story how I fixed it:
    The project is pretty big (~1500 VIs) and highly object-oriented (~300 classes). It has RT (PXI) and PC part. Some of the classes are shared between PC and RT. The problem with build was present only on PC - build for RT was ok.
    I had DSC module installed, but it was not used in this project at all. Despite that, when I found information from Lennards link, I've tried to build it using "Enable Enhanced DSC Run-Time support". It didn't help. I started to wonder if the sharing of classes between RT and PC has something to do with the problem. So I refactored the project, splitted it into two projects (one for PC, one for PXI) and reduced number of shared classes (especially some specific classes, which implement "threads"). Afterwards, the build could be done just fine, but only in those refactored projects.
    Now for the plot twist: before refactoring, I've tried to build the project on another computer. It was build without any problems! So I started to look for the differences. First of all, just before the build I've updated one of our internal libraries in VIPM and changed its name - so it was my main suspect (I needed to update dependencies in project as the change of VIPM package name changed it folder in vi.lib). This + disconnecting code from VIs and I though that I've just found another way of destroying LV compiler completely. Still, I couldn't fix it in any way...
    As per Valko suggestion I've uninstalled DSC module completely. Once again - my project does not explicitly use this module at all! Removing the module didn't broke anything in the project. And guess what? The build was done without problems! I've even tried to do this build again on the code revision before refactoring, and the build was done!
    tl;dr: REALLY NI!!?!? REALLY!? YOU'VE BROKEN SOMETHING IN THE MODULE WHICH I DON"T EVEN EXPLICITLY USE AND MADE ME LOSE FEW DAYS OF WORK JUST TO FIND IT OUT? REEEEAAAAALYYYYY!?

  • Build error importing MyFaces 1.0.7

    Hi,
    I'm trying to use the MyFaces components in SJSC, but when I import myfaces-components.jar into JSCS I get the following build-error:
    compile-beaninfo:
    Compiling 35 source files to C:\Documents and Settings\Iwan\.Creator\1_0\components\jars\beaninfo-classes
    C:\Documents and Settings\Iwan\.Creator\1_0\components\jars\beaninfo-src\net\sourceforge\myfaces\component\html\ext\HtmlCommandButtonBeanInfo.java:99: exception java.beans.IntrospectionException is never thrown in body of corresponding try statement
            } catch (IntrospectionException e) {
              ^
    1 error
    startup\bin\create-dt-jar.xml [71] Compile failed; see the compiler error output for details.
    BUILD FAILED (total time: 50 seconds)I have no clue as to what is going on, and since there seem to be no official announcement of SUN to add more sophisticated components to Creator, I guess we're stuck with the ones we get.
    Iwan

    I found a way to import that library so you can use the MyFaces components by dragging and dropping. It is a little bit of a hack, but it works.
    Steps to add library:
    1. You need to try to import the component jar first. This importing will create the .Creator\1_0\components\jars directory in the user home (i.e. C:\Documents and Settings\<YOUR USERNAME>\.Creator\1_0\components\jars).
    2. Download and install WildEdit.
    3. Run WildEdit and point it at .Creator\1_0\components\jars\beaninfo-src directory. (i.e. C:\Documents and Settings\<YOUR USERNAME>\.Creator\1_0\components\jars\beaninfo-src)
    4. In the replace textbox of WildEdit type "IntrospectionException " (no quotes but 1 space at the end or could do a regular expression with whitespace at the end)
    5. In the Replace With textbox of WildEdit type "Exception " (no quotes but 1 space at the end).
    6. In Files matching, type *.java.
    7. In Character Encoding, UTF-8.
    8. Check Search Subfolders.
    9. Try importing the jar again.
    10. During import run the Replace All utility of WildEdit against the directory continuously (i.e. click the green arrow a bunch of times) until you see repeatedly in the Log tab at bottom of WildEdit:
    Number of files searched: 35
    Number of files modified: 0
    Total changes made: 0
    These steps added the components in my Creator application, but only the components seem to have been added. The validators will have to be added by hand, but that is not too hard via the page source.
    Regards,
    Marc

  • Simple-ccsm build error.

    G'evening everyone,
    I have been trying to install simple-ccsm from AUR several times, yet get a build error each time.
    This is the error:
    ==> Starting build()...
    Traceback (most recent call last):
    File "./setup.py", line 108, in <module>
    proc = subprocess.Popen (['pkg-config', '--variable=prefix', 'compiz'], stdout=subprocess.PIPE)
    File "/usr/lib/python2.6/subprocess.py", line 621, in __init__
    errread, errwrite)
    File "/usr/lib/python2.6/subprocess.py", line 1126, in _execute_child
    raise child_exception
    OSError: [Errno 2] No such file or directory
    ==> ERROR: Build Failed.
    Aborting...
    Error: Makepkg was unable to build simple-ccsm package.
    Ccsm on its own works fine, but I wanted simple-ccsm so I wouldn't have to tweak the animation option everytime I wanted to change it from one option to another.

    SOLUTION
    download http://aur.archlinux.org/packages.php?ID=22949
    unpack and
    AS ROOT
    # pacman -S intltool
    # python setup.py install --prefix=/usr/local
    # chmod +x build/scripts-2.6/simple-ccsm
    AS USER
    $ cd build/scripts-2.6
    $ ./simple-ccsm
    voala:)
    why?
    error:
    Traceback (most recent call last):
    File "./setup.py", line 123, in <module>
    proc = subprocess.Popen(cmd)
    File "/usr/lib/python2.6/subprocess.py", line 633, in __init__
    errread, errwrite)
    File "/usr/lib/python2.6/subprocess.py", line 1139, in _execute_child
    raise child_exception
    OSError: [Errno 2] No such file or directory
    in setup.py on line 123 and 122
    122 cmd = "intltool-merge -d -u po/ simple-ccsm.desktop.in simple-ccsm.desktop".split(" ")
    123 proc = subprocess.Popen(cmd)
    initltool-merge was absent
    EDIT
    or install from repository after install initltool
    pacman -S simple-ccsm
    Last edited by navry (2010-06-25 12:14:21)

  • Installed Program Error

    I am having installation problems but not consistently. I have installed my LabVIEW-generated software using the exact same installer software on 5 separate non-LabVIEW PC's: four XP machines and one 2000 machine. The software installed without error and ran properly on 2 XP's and the one 2000. On the other two XP machines, it installed without error but when executed it gave me the error message: "The VI is not executable. The full development version of LabVIEW is required to fix the error."
    Why would it install satisfactorily on some machines and not others with exactly the same operating system?
    Side note: The computers with the two failed installations had their anti-virus/firewalls disabled or removed completely.

    Hi SBS,
          While it's great that you've narrowed-down the problem, are you sure it's an AX node(?)  If you don't mind, please attach the About.vi.
    > Is there a way to determine what DLL's are needed and incorporate them into the installer?
    Any file - including DLLs - can be bundled with an installer, though, I don't know of any LabVIEW tool or function that lists all project dependencies such as DLLs.
    You may not always want to bundle DLLs with your installer.  Some DLLs are installed with Windows Applications and may not work without other software components.
    Re: Version info, as of LV8.5 (maybe earlier) there's an Application-class\Version property, though I'm not sure how useful it is.  Here's a good link on .NET methods for getting Version info.  In my opinion, NET is much friendlier than AX, though if these look like what you already have maybe gsussman nailed it after-all!
    Yes, the EXEs error message is often (but not always) unhelpful.  Maybe LabVIEW could build/display a list of problems when one or more VIs in an EXE's hierarchy are broken(?)
    More later!
    SBS wrote:
    My app/installer will eventually be placed on a website and downloaded by "average" people, which rules out installing the "full" LabVIEW version and other well-intentioned suggestions.
    Is there a way to determine what DLL's are needed and incorporate them into the installer?
    Is there a better way to get version information? Most systems have a "tip strip" that displays this info when the cursor is placed on the "exe". Why not have a VI conveniently get the same information without specialized Active X controls?
    Why do deficient app's build and subseqently install successfully and then simply refuse to run at all rather than producing an error when the Active X control is invoked within the app? Why doesn't the Application builder identify broken links, missing VI's, and required DLL's during the build process? It seems that having a successfully installed app display the message "The VI is not executable. The full version of LabVIEW is needed." is a rather cryptic error message late in the development process.
    Thanks to all who contributed help and direction. Keep it coming.
    "Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Maybe you are looking for