Install Java SE for embedded

Hello,
I am trying to install Java SE for Embedded 7 ARM v6/7 Linux Headless on my Pogoplug ARM v6 running Linux Arch.
For this I downloaded the .tar.gz file from Oracle's website ( version=7u4-armv6-eabi-k2.6.28-libc2.9-hflt-le), applied the tar command to decompress, moved the result to /opt/java, adapted the enironment variables by editing the /etc/profile file as follows:
PATH="/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/java/bin"
export PATH
export JAVA_HOME="/opt/java"
export PATH="opt/java/bin:$PATH"
when running an application that needs JAVA, I get:
17015 Illegal instruction java -Declipse.ignoreApp=true -Dosgi.noShutdown=true -Djetty.port=8080 -Djetty.port.ssl=8443 -Djetty.home=. -Dlogback.configurationFile=logs/logback.xml -Dfelix.fileinstall.dir=addons -Djava.library.path=lib -Djava.security.auth.login.config=./etc/login.conf -Dorg.quartz.properties=./etc/quartz.properties -jar $cp $* -console
I assume Java is not installed correctly (it is the first time I install manually)?

I see the same error for my ARM9 from Atmel. I think it's because my ARM9 AT91SAM9263 processor is ARMv5TEJ and ejre1.6.0 require ARMv6 or above. Don't mix up ARM9 and ARMv6. It's different thing.
Derek

Similar Messages

How can install java sdk for mac os x 10.6.8

How can install java sdk for mac os x 10.6.8?

Deanwdd wrote:
I mean to update Quicktime for Mac Os X 10.6.8...
If you're running 10.6.8, Apple menu > Software Update. What version of QT do you have?

User mapping when installing JAVA addin for ABAP

Hi,
I have installd SAP ABAP on a domain.
As the ABAP went fine and successfully gets installed.
When I am installing JAVA addon for ABAP it is throwing an error lke the users are not mapped.
So can any one guide me where actually I should map the SAP users in a domain.
Prashanth

Your question is very vague, please post the full error.
As this is a java add-in it should user ABAP as datasource so no user mapping should be required.
User mapping is used where java and backend system use different datasources and the naming conventions are different...
Theres not enough information here to give you an objective answer.
Regards
Juan

New Java SE for Embedded 6 free evaluation releases on ARM/Linux available

Hi:
People who are reading this forum might be interested to know about
Sun's Java SE for Embedded 6 releases on ARM/Linux that have been
made available today for free evaluation -- three updated releases (for
ARM v6 and v7) and two new releases (for ARM v5), both headless
and headful versions are available:
[http://java.sun.com/javase/downloads/embedded.jsp|http://java.sun.com/javase/downloads/embedded.jsp]
[http://java.sun.com/javase/embedded/system_requirements.jsp|http://java.sun.com/javase/embedded/system_requirements.jsp]
When you select a Java SE for Embedded eval through either of the
above URLs, the download link will be sent to you by e-mail after you
fill out a quick survey and agree to a click-through, 90-days e-license.
For more information about Sun's Java SE for Embedded product, please
start at the main web page for this product:
[http://java.sun.com/javase/embedded/|http://java.sun.com/javase/embedded/]
This page also includes a link through which you can [contact Sun|http://www.javelinfeedback.com/sun/index.jsp?pi=353770340fcc19a6ca0f558647d48f48] to submit
any further questions about the Java SE for Embedded product.
Thanks,
Carlos B. Lucasius
Java SE Embedded and Real-Time Engineering
Sun Microsystems, Inc.
[http://sites.google.com/site/javartsandjavaseforembedded/|http://sites.google.com/site/javartsandjavaseforembedded/]

Hello,
Just a quick question: can we have an official position from Sun regarding support of earlier releases of Solaris with Java RTS 2.1? Our customer is currently running Solaris 10 Update 3 with current Recommended patches, and the 2.1 beta cyclic driver supported this version of Solaris. However with the official release version of 2.1, support for U3 disappeared (only U4 and U5 are now supported). Aside from "rubber stamping" the Solaris build via /etc/release, is there a technical reason why U3 is no longer supported? As long as our kernel is up to date, can we safely use 2.1? Or is it just a case of being unable to officially support and test so many releases of Solaris?
Is this a general rule-of-thumb we can expect in future: only supporting the last 2 updates of Solaris 10?
Your advice is appreciated.
Thanks,
Dave.

Downloading and Installing Java SDK for AIX

Could anyone please tell me where can i download Java SDk for AIX and how to install it before installing SAP?
Thanks in Advance

Hi Mega,
You can downloads Java SDK 1.4.2 from this location, just choose the OS,
https://sdlc5d.sun.com/ECom/EComActionServlet;jsessionid=CA558AF3F6842F61D26641D9A6853DCA
installation is very simple, just copy the downloaded file and execute by running ./<name of the file>.sh at the command prompt.
Regards
Juan
Please reward with points if helpful

Install Java plugin for IE without manual update or install

Hi,
I have a client machine with JRE installed. Now i see the problem that java plugin is not installed in IE. Is there anyway i could manually register java plugin for IE without using installer or java update ? would it be possible to use command line argument or such alternative please let me know.

I would like to find a way to allow a user without
administrative rights to install the Java-Plugin for
using Java-Applets. As far as I understood, the
plugin can be installed in a silent way withou
registry modifiactions. Is this working for users
without admin rights?Could anyone please explain, why it is so difficult for Sun to create an installation package for user without admin rights? The whole "GetJava"-program doesn't make any sense for ordinary users if they get the JRE downloaded seamlessly and then the installation fails due to missing admin rights. This way Java would never succeed on the desktop.
Andr�

Can't install Java update for OS X 10.6

I'm totally lost and need help.
I have a MacBook Pro, OS x 10.6. I have downloaded/tried to install every version of Java update available, and my system won't let me install.
This is the error message: "This update requires Mac OS X version 10.6.8 or later."
Any suggestions? Thanks in advance for your help!

chickneedshelp wrote:
I'm totally lost and need help.
I have a MacBook Pro, OS x 10.6. I have downloaded/tried to install every version of Java update available, and my system won't let me install.
This is the error message: "This update requires Mac OS X version 10.6.8 or later."
Any suggestions? Thanks in advance for your help!
You need to update your os to 10.6.8, repair permissions after the installation and restart your computer when done. Then you should be able to install all the other updates from Software Update. If you have a lot which I imagine you do, install 2 at a time. After all the installations are done repair permissions and restart your computer.

Why can't I install java applet for Google Drive. I am forced now to use Google Chrome. I did everything acc.to your instructions for add-ons.

I am trying to upload maps into GoogleDrive. In Firefox I get the info that the java applet cannot be installed. After installing GoogleChrome it works perfectly.
I did everything acc.to your instructions re. admitting add-ons, etc.

There are other things that need your attention.
Note that your System Details List shows multiple Flash plugins.
# Shockwave Flash 12.0 r0
# Shockwave Flash 11.9 r900
You can find the installation path of all plugins on the about:plugins page.
You can check the Flash player installation folder for multiple Flash player plugins and remove all (older) version(s) of the plugin (NPSWF32) and (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
See also:
*What should I do when I see a security prompt from Java?: http://www.java.com/en/download/help/appsecuritydialogs.xml

Install JAVA Stack for CRM

Hi, I have installed CRM 7.0 EHP3 AS ABAP over Windows 2012+SQL 2012 and I want to install AS JAVA CRM 7.0 EHP3
I recenlty upgraded my NW AS JAVA 7.3 to NW AS JAVA 7.4, can I use this NW AS JAVA to implement CRM 7.0 EHP3 AS JAVA Stack?
what package do I need to deploy?

So from what I understand you have a NW 7.4 Java system you upgraded from NW 7.3. I am assuming this is standalone Java stack.
you can technically put CRM Java 703 as an add-on to this but it will be tricky. I think the best way to do that will be use Maint optimizer to select appropriate components. run an Maint optimizer transaction and see if it shows up SAP CRM as add-on to this. If it does, you should be able to put in all correct components along with appropriate add-ons.
doing it manually, you will have to pick all relevant CRM java components and still I think it will be tricky to get it working. Honestly I have not done it.
Easiest way to do it of-course will be to install a standalone Java stack system with CRM components to start with but then of-course you will end up with a separate java stack. We did the same and now we have 6 java stack business systems to serve various business add-ons. I would love to consolidate them to fewer but too lazy to put in the efforts.
Do update the message with your findings, it will be interesting to know how it worked. Maybe it encourages me to take the initiative.
hope this helped
regards
Yogesh

Looking for label SAP:UT:NW04SSR3:*:*:* while installing java comp ECC6 SR3

Hi All,
Looking for label SAP:UT:NW04SSR3:::* while installing java component for ECC6.0 SR3.
I am using the path as 51033526\J2EE_OSINDEP but it is giving an error. Please help to provide the correct path for label.asc.
With Regards,
Lolla.
Edited by: Lolla Venkata Murali Krishna on Feb 17, 2009 2:24 PM

Hello,
Correct path is only number 51033526 for BS 2005 SR3 Java Components
But this installation I guess need number 51033513 NW 7.0 SR3 SP14 Java based SW Comp.
best regards,
Peter Nechala

Java plugin for firefox

Hi All !
I hope this is the right forum. I have installed java plugin for firefox
I try the website javatester.org and I get a message saying:
Your security settings have blocked an untrusted application from running.
If I understand this correct this is not a firefox message but a java message
so...
I have used the java control panel and added the site to the site list
I also lowered the security settings to medium
Restarted the browser and tried again but no luck, what am I missing ?
Appreciate your feedback !
Thanks
Magnus

Hi,
Did you activate the JDK java for your browser in the java plugin config.
Configuration Panel -> java plugin -> Advance -> Default Java for Browser
Regards,
Quickcga

Installing Java 3d

Can anyone help me through the steps of how to install Java 3D for Windows (OpenGL Version).
what files do i put in what folders and where ive read the readme file makes no sense.
anyone know how to do it.

http://java3d.j3d.org/tutorials/quick_fix/auto_install.html

Adobe Player for Embedding installation failure

Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
Any suggestions on what I should try are welcome!
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
Win OS version: 6.1.0.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[    4956] Sun Nov 14 07:48:25 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
Action string for {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
[    4956] Sun Nov 14 07:48:26 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
[    5276] Sun Nov 14 07:48:26 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Command ARKPatchCommand failed.
[    5276] Sun Nov 14 07:48:26 2010 INFO
Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Error rolling back command ARKPatchCommand
[    4956] Sun Nov 14 07:48:27 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[    4956] Sun Nov 14 07:48:29 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[    4956] Sun Nov 14 07:48:29 2010 ERROR
The following payload errors were found during install:
- Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
[    4956] Sun Nov 14 07:48:29 2010 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: 6 Command ARKPatchCommand failed.
ERROR: 6 Error rolling back command ARKPatchCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

As an update to my previous post about the installation failure. I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
I solved the problem by:
1) Deactiviating CS5 Master Collection on my computer
2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
3) Downloading and running the Adobe CS5 Cleanup tool.
4) Reinstalling CS5 MC.
5) Downloading and installing all of the updates to bring the install up to date.
I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs...

Java 8 SE Embedded download - which version for my RPi?

One thing I struggle with is knowing which download for my RPi.
I keep reading I should use the hard floating point version. That said, here's the only Java 8 SE Embedded version I see with HardFP: ARMv7 Linux - VFP, HardFP ABI, Little Endian1
On my RPi, here's the output from "uname -a"
> Linux bsrpi 3.10.34+ #661 PREEMPT Thu Mar 27 00:36:02 GMT 2014 armv6l GNU/Linux
Will the HardFP version on the download page work on my RPi? It appears to be arm6.
The only thing I see available with ARMv6 is: ARMv6/7 Linux - VFP, SoftFP ABI, Little Endian2
If you have the answer or even refer me to a good site that explains the differences, I'd be very grateful. If not, I'll just keep pulling out my hair! :-)
Thanks for any help you have,
Brent Stains

I received help from Stephen Chin on this! Thank you Steve. You can see his excellent work here: Steve On Java
I also found some information from Hinkmond Wong's blog: https://blogs.oracle.com/hinkmond/entry/even_quicker_guide_to_install
I'm pasting a modified version of the conversation and information here for other wandering souls!
METHOD 1 - download & deploy, options for compact profiles
Most Raspberry Pi distributions have been hard float for a while... To check, look for the following file:
/lib/arm-linux-gnueabihf
If this exists, you are running hard float.
Once you have your Pi on a hard float build, grab the latest Java 8 from here:
http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html
Grab the first one titled "jdk-8-linux-arm-vfp-hflt.tar.gz"
For doing compact profile work to learn how SE Embedded is used (and compact profiles work) go to the downloads on this page: http://www.oracle.com/technetwork/java/embedded/downloads/java-embedded-java-se-download-359230.html
and start with this one: ejdk-8-fcs-b132-linux-arm-vfp-hflt-03_mar_2014.tar.gz (ARMv7 Linux - VFP, HardFP ABI, Little Endian)
then use jrecreate to shrink it.
METHOD 2 - use apt-get on the Raspberry Pi, full "embedded" version of the JDK
From Linux command line >> sudo apt-get update && sudo apt-get install oracle-java8-jdk
Note: see Hinkmond's blog post and an excellent explanation in the comments section on the meaning of SE Embedded
Enjoy!
Brent S

Unable to run the 9.3 JAVA API in "embedded" mode without APS installed

Hello, I'm trying to run the 9.3 JAVA API in "embedded" modewithout APS installed. I first used build Build 242 which was supplied with 9.3beta. This worked great and exactly the way I wanted to.Now I'm trying to do the same with the production release of 9.3JAPI which is (to my knowledge) build 305. With build 305I'm not able to connect to Essbase without APS installed. The reason I do not want to install APS is because I'm runningthe Java code from with an Oracle database (the JAPI jars areloaded into the database) Please see below loglines (running the sampleConnect.class): Build 242 (whichworks ok)Java(TM) 2 Runtime Environment, Standard Edition (build1.4.2_06-b03) Java HotSpot(TM) Client VM (build 1.4.2_06-b03, mixed mode) WARN [main]: - Time: Mon Feb 12 08:53:24 CET 2007, AnalyticProvider Services - Release 9.3.0.0 Build 242 Copyright (c) 1991-2006 Hyperion Solutions Corporation. All rightsreserved. connection mode : EMBEDDED WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007, connection mode: EMBEDDED essbase.properties: essbase.properties WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007,essbase.properties: essbase.properties domain.db location: ./domain.db WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007, domain.dblocation: ./domain.db WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007,cluster.monitor.interval : 30INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: sign on (from user Administrator session number 5178) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: get my analytics mode (from user Administrator sessionnumber 5178) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: (from user '**aps_profile is Enabled**' session numberfalse) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: connect to olap service (from user Administrator sessionnumber 5178) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: (from user '**aps_profile is Enabled**' session numberfalse) Connection to Analyic server '10.130.60.78' was successful. INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: sign off (from user Administrator session number 5178) Process exited with exit code 0. Build 305 (whichdoes not work ok)Java(TM) 2 Runtime Environment, Standard Edition (build1.4.2_06-b03) Java HotSpot(TM) Client VM (build 1.4.2_06-b03, mixed mode) WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007, AnalyticProvider Services - Release 9.3.0.0 Build 305 Copyright (c) 1991-2006 Hyperion Solutions Corporation. All rightsreserved. connection mode : EMBEDDED WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007, connection mode: EMBEDDED essbase.properties: essbase.properties WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007,essbase.properties: essbase.properties domain.db location: ./domain.db WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007, domain.dblocation: ./domain.db WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007,cluster.monitor.interval : 30INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: sign on (from user Administrator session number 68529) INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: get my analytics mode (from user Administrator sessionnumber 68529) INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: connect to olap service (from user Administrator sessionnumber 68529) Error: Cannot connect to olap service. null INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: sign off (from user Administrator session number68529) Process exited with exit code 1.

Hello, I'm trying to run the 9.3 JAVA API in "embedded" modewithout APS installed. I first used build Build 242 which was supplied with 9.3beta. This worked great and exactly the way I wanted to.Now I'm trying to do the same with the production release of 9.3JAPI which is (to my knowledge) build 305. With build 305I'm not able to connect to Essbase without APS installed. The reason I do not want to install APS is because I'm runningthe Java code from with an Oracle database (the JAPI jars areloaded into the database) Please see below loglines (running the sampleConnect.class): Build 242 (whichworks ok)Java(TM) 2 Runtime Environment, Standard Edition (build1.4.2_06-b03) Java HotSpot(TM) Client VM (build 1.4.2_06-b03, mixed mode) WARN [main]: - Time: Mon Feb 12 08:53:24 CET 2007, AnalyticProvider Services - Release 9.3.0.0 Build 242 Copyright (c) 1991-2006 Hyperion Solutions Corporation. All rightsreserved. connection mode : EMBEDDED WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007, connection mode: EMBEDDED essbase.properties: essbase.properties WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007,essbase.properties: essbase.properties domain.db location: ./domain.db WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007, domain.dblocation: ./domain.db WARN [main]: - Time: Mon Feb 12 08:53:25 CET 2007,cluster.monitor.interval : 30INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: sign on (from user Administrator session number 5178) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: get my analytics mode (from user Administrator sessionnumber 5178) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: (from user '**aps_profile is Enabled**' session numberfalse) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: connect to olap service (from user Administrator sessionnumber 5178) INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: (from user '**aps_profile is Enabled**' session numberfalse) Connection to Analyic server '10.130.60.78' was successful. INFO [main]: - Time: Mon Feb 12 08:53:25 CET 2007, [Mon Feb 12 08:53:25 CET 2007] - Service using EMBEDDED Request: sign off (from user Administrator session number 5178) Process exited with exit code 0. Build 305 (whichdoes not work ok)Java(TM) 2 Runtime Environment, Standard Edition (build1.4.2_06-b03) Java HotSpot(TM) Client VM (build 1.4.2_06-b03, mixed mode) WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007, AnalyticProvider Services - Release 9.3.0.0 Build 305 Copyright (c) 1991-2006 Hyperion Solutions Corporation. All rightsreserved. connection mode : EMBEDDED WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007, connection mode: EMBEDDED essbase.properties: essbase.properties WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007,essbase.properties: essbase.properties domain.db location: ./domain.db WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007, domain.dblocation: ./domain.db WARN [main]: - Time: Mon Feb 12 08:54:28 CET 2007,cluster.monitor.interval : 30INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: sign on (from user Administrator session number 68529) INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: get my analytics mode (from user Administrator sessionnumber 68529) INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: connect to olap service (from user Administrator sessionnumber 68529) Error: Cannot connect to olap service. null INFO [main]: - Time: Mon Feb 12 08:54:28 CET 2007, [Mon Feb 12 08:54:28 CET 2007] - Service using EMBEDDED Request: sign off (from user Administrator session number68529) Process exited with exit code 1.

Install Java SE for embedded

Similar Messages

Maybe you are looking for