Install JMQ into other directory than /opt/sun/ without root user possible?

hi *,
i just wanted to know if there is the possibility to install JMQ 4.1 in a custom directory?
AND is there the possibility to install the JMQ server without root?
we do have several embedded JMQ servers inside sun appserver that do not need root or a specific directory why should the standalone version need this?
regards chris

There is no non-root install available on Solaris or Linux with SJSMQ. (we are looking into it, but we have been waiting for a new packaging system to come out as a side-effect of Solaris 11 which would handle installation in non-root locations, management of packages and patching).
We are also investigating making the packages re-locatable in the next release (so you would still have to be root but you could cleanly install into export or some other location). However this requires generating a whole new bundle of packages and later patches (the current layout is dictated by the fact that we have older releases which ship included in the solaris operating system)
At the moment ...
On Solaris, you can install SJSMQ as root into another directory (using the -R flag to pkgadd) however the installed directory structure looks a bit nasty (since it would look have paths something like /export/mq/usr/share/lib/imq/props/config.props)
On openMQ, we do have a tar based bundle which can be installed on any system (not as root). The downside is that it is not supported and can not be patched.

Similar Messages

I need to upload my files from one directory into other directory.

i need to upload my files from one directory into other directory.( all its contents,folders,sub folders, files etc)
for this task
suppose my source folder is C:/test/test1/test2/test3
and my destination is D:/
first i have to check whether my dest dirctory already contains source directory..and its files
if it contains the same structure then i have to replace the destination dir structure to source dir structure( to upadte changes)
if it(dest dir) not contains source dir ..means it doesn't contain source folder then
i have to create same source folder directory structure ( test.test1/test2/test3...) at destination(D:/) and copy all its contents frm source directory...
( means i don;t want to create manually same dir structure as source at destnation dir to copy all contents)

I believe you need to read up on the class File.java (it comes with java).
Some examples:
File file = new File("C:/myDirectory");
if(file.isDirectory())
System.out.println("this is a directory");
if(file.isFile())
System.out.println("this is a file").
You will then need to read up on other classes to read/write to the file such as FileReader and FileWriter.

Install Directory 5.2P4 as non root user.

I want to install Sun Directory Server 5.2 p4 on solaris 9 as non root user?
Is there a supported way of doing this. I dont want any of the files for directory owned by root.
The reason is that there is a very strict access control method implemented in their environment.
The message i get is
$ ./setup
arning: You are not logged on as root. Unless you are logged on as root,
information required to upgrade or uninstall this product will not be saved in
the system registry. This will adversely affect future upgrades/reinstalls as
well as the ability to perform a successful uninstallation. Manual cleanup
after uninstallation may be required in certain cases.
Press Enter.

If you just want as said:
I dont want any of the files for directory owned by root.then its possible with DS5.2 P4 on solaris:
1. become root user and start setup to install the DS5.2P4 software.
2. When the setup application asks for server uid /server group id, give the non-root userid and group.
When the setup is finished ns-slapd process is started automatically. The only problem is that you have to be root user to re-start the ns-slapd daemon from the command shell. But the files are owned by the non-root user always as you required.
However this will not work if you want to restart the DS from the java GUI console. (however there is a workaround to do this).
Regards
Randip

Hi! I'm using FF 7.0.1 and I can't install the WMP plugin. After instalation it says that I still need to instal. I've instaled FF in other directory then suggested. Is there any solution for it?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/891040]]</blockquote>
windows 7 64bit Home Premium
WMP 12
Firefox 7.0.1

Your More system details list doesn't show the WMP plugin (np-mswmp.dll), so you will have to try again.
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

How do I install iOS 7 on more than one iPad without doing multiple downloads?

I have limited downloads from my isp - out in the country and very expensive.
Is it possible to download iOS updates for 1 ipad (4) and then install the update on additional ipads without having to download the update again?
If this can be done, please explain the process so that I can save on my download cap?

you need to update each device individually.

Is it possible to install Acrobat XI on more than one devise without extra charge?

I have bought an annual Acrobat XI subscription, however my old laptop has broken and I can no longer access the program. Is it possible for me to install Acrobat XI on my new laptop without incurring extra charges?
Thanks.

Yes, your license key is cross platform PC & or Mac you are allowed to have two current installations with one in use at any point in time. You can uninstall / install as many times as is necessary so long as you adhere to the limits.

10.9.3: Not able to log onto other networks than mine at home and Go Daddy outgoing mail not sending (smtp)

A week ago my go daddy email stopped working as it would receive but not send. It's an imap account and hence it would not connect to the smtp server when attemting to send. Incoming imap server works well. When trying to use a network outside my home, I discovered that I cannot log into other networks than my own any longer. Email and wifi on my phone works all fine. I have been on the phone with Apple and Go Daddy for 3 hours altogher, tried different solutions such as deleting anti virus software, deleting and resetting email account, tried different port versions etc to no avail. Since I can still not log on to other networks, I am suspecting it be an operating system error? Has anyone experienced a similar problem or has a possible solution please?

Thanks. here it is:
EtreCheck version: 1.9.12 (48)
Report generated 6 July 2014 17:13:17 BST
Hardware Information:
    MacBook Pro (13-inch, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro9,2
    1 2.9 GHz Intel Core i7 CPU: 2 cores
    8 GB RAM
Video Information:
    Intel HD Graphics 4000 - VRAM: (null)
        Color LCD 1280 x 800
System Software:
    OS X 10.9.4 (13E28) - Uptime: 0 days 0:21:7
Disk Information:
    APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 749.3 GB (309.85 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information:
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
    Apple Inc. thunderbolt_bus
Gatekeeper:
    Anywhere
Kernel Extensions:
    [not loaded]    com.wacom.kext.wacomtablet (6.3.1w2) Support
Launch Daemons:
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.adobe.SwitchBoard.plist Support
    [loaded]    com.bombich.ccc.plist Support
    [running]    com.crashplan.engine.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
Launch Agents:
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.adobe.AdobeCreativeCloud.plist Support
    [loaded]    com.adobe.CS5ServiceManager.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [running]    com.wacom.wacomtablet.plist Support
User Launch Agents:
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.akamai.single-user-client.plist Support
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist Support
User Login Items:
    iTunesHelper
    Dropbox
    CrashPlan menu bar
    kati_macbook_backup
    images
    SpyderUtility
Internet Plug-ins:
    WacomNetscape: Version: 1.1.1-1 Support
    Default Browser: Version: 537 - SDK 10.9
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
    WacomTabletPlugin: Version: WacomTabletPlugin 2.0.0.6 Support
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
    Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
    AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
    JavaAppletPlugin: Version: Java 7 Update 55 Check version
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes:
    Akamai NetSession Preferences Support
    Flash Player Support
    Java Support
    WacomTablet Support
Time Machine:
    Time Machine not configured!
Top Processes by CPU:
        15%    CrashPlanService
         3%    firefox
         2%    plugin-container
         1%    WindowServer
         1%    Creative Cloud
Top Processes by Memory:
    360 MB    firefox
    303 MB    CrashPlanService
    164 MB    com.apple.IconServicesAgent
    106 MB    mds_stores
    98 MB    Mail
Virtual Memory Information:
    4.34 GB    Free RAM
    2.24 GB    Active RAM
    557 MB    Inactive RAM
    893 MB    Wired RAM
    558 MB    Page-ins
    0 B    Page-outs

Restore and apply online redologs into different directory

Hi all!
I need to restore oracle db to other directory of another sap system (instance).
I successfully restored control files & datafiles into other directory but oracle not starting.
Probably because there is no necessary online archive redologs.
How can i restore necessary online redologs into different directory and apply them?
Thanks for help

I have some troubles. Maybe /oracle/TSM/sapdata1/system_1/system.data1' really unconssistent?
But i recovered datafiles from tape....
SQL> @/oracle/TSM/saptrace/usertrace/control.sql
Control file created.
SQL> shutdown
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Database mounted.
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 113646088 generated at 05/27/2011 18:04:28 needed for thread
1
ORA-00289: suggestion : /oracle/TSM/oraarch/TSMarch1_3817_598559720.dbf
ORA-00280: change 113646088 for thread 1 is in sequence #3817
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log
'/oracle/TSM/oraarch/TSMarch1_3817_598559720.dbf'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/TSM/sapdata1/system_1/system.data1'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/TSM/sapdata1/system_1/system.data1'
SQL> shutdown
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
Edited by: Andrey Burakov on Jun 2, 2011 5:04 PM
Edited by: Andrey Burakov on Jun 2, 2011 5:05 PM

Linux Firefox install html 5 video tags only playing when Firefox run as root user?

Installed Firefox 12.0 in CentOS 5.8 as root user. Any user can open FF but when visiting pages that have html5 video content only when FF is started as root is FF able to display the video ...otherwise you get the "No video with supported format and MIME type found."
Tried installing FF12.0 in users local directory as well still no luck.

So this doesn't work for you with the video tag?
*http://www.mozilla.org/en-US/firefox/video/
Try to create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Did you install the 32 version of plugins assuming that you've installed the regular 32 bit Firefox 12.0 version?
*http://www.adobe.com/software/flash/about/
You can find the latest Flash player for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
See also:
* http://kb.mozillazine.org/Determining_plugin_directory_on_Linux

My problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set sav

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/986549 /questions/986549]''
my problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set save downloads to my e drive....but still firefox keeps saving them to my c drive....i have 4 internal hard drives in my rig....and have tried saving downloads to them all.......why this is happening i cant understand....i have tried lots of suggestions....and have re-installed firefox multiple times

hello, there's a general regression in firefox 27 that won't allow files to download directly into a root drive. please try to create a subfolder (like ''E:\Downloads'') and set this as default location for downloads...
also see [https://bugzilla.mozilla.org/show_bug.cgi?id=958899 bug #958899].

I repet : I can't install Firefox in another directory that C. I am not allowed by Firefox 3.6.10 to write another directory than C\downloads or another but started with C:\.

I repet : I am not allowed to write another directory than C:\\ when I direct Firefox fon installing.
I want to post Firefox in G:\\, where I have enought space. In C:\\ I just have space for Windows .

Please stick with your original thread. Locking this one as a duplicate.
https://support.mozilla.com/en-US/questions/754307

Downloads won't install into iTunes directory

I have an external HDD plugged into my Time Capsule that has my entire library on it and I have Itunes set to this location. Everything will sync from it but when I buy new songs they copy into the directory on my local HDD and not the network location that is set as my library. How do I fix this?

Check the installation guide and the release notes. I guess that Developer can not be installed on XP. I had similar problems even when I was running in W2K-compatibility mode.

HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

I used Inkscape on Linux before moved to Mac. Now I am trying to install it
using MacPorts, but libpixman has some problems that has been reported out there.
Does any one know how to fix it without the need to use other way than MacPorts?

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

Trigger to insert unique data into other table (having more than 40 millions of records) - MYSQL

Hi All,
i am facing impact of trigger in MYSQL, scenario is this:
I am Having one table with duplicate records that is consist of (eid,tin,status and some other columns are also there but i need only these three). there is another table which is having same these three columns (eid, tin, status).
eid and tin will be same for given combination only status will be different i.e.
1245 23 0
1245 23 1
1245 23 5
1233 33 3
1211 24 2
1211 24 5
so as per above example i have to feed data into other table as
1245 23 0
1233 33 3
1211 24 5
priority of status is like 0 will be inserted if that is present in record otherwise it will be decrease from 5 to 1.
so i have designed trigger for this which will insert data after reading each row, but it is taking around 6.5 minutes for inserting 300000 records. so is there any other way to improve performance for this mysql program.
DELIMITER $$
CREATE
    /*[DEFINER = { user | CURRENT_USER }]*/
    TRIGGER `kyr_log`.`upd_status` AFTER INSERT
    ON `kyr_log`.`kyrlog_bup`
    FOR EACH ROW
    BEGIN
DECLARE v_eid VARCHAR(28);
DECLARE v_status INT(11);
SELECT kyrl_eid,kyrl_status INTO v_eid,v_status FROM kyrlog_bup ORDER BY kyrl_id DESC LIMIT 1;
   IF v_eid NOT IN (SELECT kyrl_eid FROM update_status.new_status) THEN
INSERT INTO update_status.new_status(kyrl_eid,kyrl_tin,kyrl_status)
SELECT kyrl_eid,kyrl_tin,kyrl_status FROM kyrlog_bup ORDER BY kyrl_id DESC LIMIT 1;
   ELSE IF v_status=2 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
          UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
   ELSE IF v_status=3 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
          UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
   ELSE IF v_status=4 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
           UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
   ELSE IF v_status=5 THEN
IF v_status > ANY (SELECT kyrl_status FROM kyrlog_bup WHERE kyrl_eid=v_eid AND kyrl_status<>0) THEN
           UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
END IF;
           ELSE IF v_status=0 THEN
UPDATE update_status.new_status SET kyrl_status=v_status WHERE kyrl_eid=v_eid;
          END IF;
       END IF;
       END IF;
       END IF;
       END IF;
       END IF;
    END;
$$
DELIMITER ;
please suggest me if there is possibility of any other solution.
thanks

actually you didn't have seen discussion on this link , there are many discussion related to MYSQL . and mysql is owned by oracle. so i post it here.
thanks for suggestion

Logging app messages into another file than server.log

Hello:
I'm working with Application Server Enterprise Edition 7 2004Q2 and I'd like logging application messages into another file than server.log.
I tried to set up a logging configuration file as
com.appname.handlers = java.util.logging.FileHandler
( where all packages in my application are named like com.appname.* )
and pass it as
-Djava.util.logging.config.file
But nothing happens. Indeed , no file is created.
I tried with
handlers = java.util.logging.FileHandler
and works fine but, obviusly, are wrote server messages too.
So, the problem is 'com.appname.handlers ' property, but I dont know why.
any workaround to perform this ?
what's wrong ?
Thanks in advance.
Best regards

Hi,
The samples are usaully in the samples directory of the appserver install dir. However, this might depend on the server install.
Anyway, samples can be downloaded from:
http://developers.sun.com/prodtech/appserver/reference/codesamples/index.html
This is a zip file with all the samples stuff
The actual code in there:
        // import for logging classes
        import java.util.logging.*;
        //Remove all handlers
        Handler[] h = logger.getHandlers();
        for (int i = 0; i < h.length; i++) {
            logger.removeHandler(h);
//Set it to its parent handler so that it gets NOT (by Robert) printed on the server log
// In the original sample this is set to true
logger.setUseParentHandlers(false);
The actual way of adding your own file log handler:
     // Create a file handler with a string as parameter for filename
      Handler fh = new FileHandler(<LOGFILENAME>);
       // Create a formatter to format the logger
       fh.setFormatter(new SimpleFormatter());
       // Add the handler to logger instance
       logger.addHandler(fh);See the javadocs for formatting stuff,
HTH Robert

Install JMQ into other directory than /opt/sun/ without root user possible?

Similar Messages

Maybe you are looking for