Restore and apply online redologs into different directory

Hi all!
I need to restore oracle db to other directory of another sap system (instance).
I successfully restored control files & datafiles into other directory but oracle not starting.
Probably because there is no necessary online archive redologs.
How can i restore necessary online redologs into different directory and apply them?
Thanks for help

I have some troubles. Maybe /oracle/TSM/sapdata1/system_1/system.data1' really unconssistent?
But i recovered datafiles from tape....
SQL> @/oracle/TSM/saptrace/usertrace/control.sql
Control file created.
SQL> shutdown
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Database mounted.
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 113646088 generated at 05/27/2011 18:04:28 needed for thread
1
ORA-00289: suggestion : /oracle/TSM/oraarch/TSMarch1_3817_598559720.dbf
ORA-00280: change 113646088 for thread 1 is in sequence #3817
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log
'/oracle/TSM/oraarch/TSMarch1_3817_598559720.dbf'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/TSM/sapdata1/system_1/system.data1'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/TSM/sapdata1/system_1/system.data1'
SQL> shutdown
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
Edited by: Andrey Burakov on Jun 2, 2011 5:04 PM
Edited by: Andrey Burakov on Jun 2, 2011 5:05 PM

Similar Messages

How to upload and download a files into AL11 directory in ABAP

Hi,
How to upload and download a files into AL11 directory in ABAP
thanks
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Mar 21, 2011 9:18 AM

You should try one of these forums for an answer to your question:
http://swforum.sun.com/jive/forum.jspa?forumID=116
http://community.java.net/netbeans
http://linux.java.net

Restoring whole db Online backup with redologs backup

Dear all,
I am planning to restore a whole DB online + redo logs backup, i have few doubts . please confirm..
On Step 8, Restore and apply archivelog files ...
First sequence number (first_seq) .. (eg) 7276
Last sequence number (last_seq) .. (eg) 7278
we probably only have to mention the last_seq.... Now question is , is this the last archive created when the backup finished...(ie 7278) and in the backup log, it was mentioned that the Next archivelog is 7279...
another question , when we are restoring this backup next day , can we apply archives created after 7278 to achive DB point in time..
Thanks & regards
Adnan

Hi
U have to recover the databse using the archive files after the backup was taken.
The archive files should be copied from the source system to the target but make sure that u rename those archive files as acceptable to the target system ie log_archive_format parameter of the target system. ie sid should be there in the name of the archive files.
One more thing if u wish to keep the target DB in sync with the source DB then u would need to apply all the archive files generated after the online backup was taken.
Make sure to open the database in resetlogs mode
In short the steps wud be as follows.
1. Issue the following in ur source system
alter database backup controlfile to trace ; .
2.Modify the .trc file as below created under usertrace directory which generally shud be /oracle/SID/saptrace/usertrace
a. CREATE CONTROLFILE SET DATABASE "Target_SID" NORESETLOGS ARCHIVELOG
b.The directory structures of the redo log and datafiles as per the directory structure available in ur target system.
c.Remove all other lines from the file ur file should end with like character set ...;
d. Save the file as something.sql and copy it to the target system.
3. Restore the online backup on the target system ...don't need to restore the redo log files.
Also copy the archive file from the source system to the target system and rename them as per target system.
4. In the target system connect as sysdba
SQL> startup nomount
SQL> @something.sql
It wud say control file created and the DB will be mounted .
5. Now issue the command
Recover database using backup controlfile;
Apply the archives when done issue the following
alter database open resetlogs;
Regards
Kausik

Read line and split into different fields

I have a flat file with space (multiple spaces between different fields) as a delimiter. The problem is, file is coming from 3rd party and they don't want to change the separator as comma or tab delimited CSV file. I have to load data in ODS (BW 3x).
Now I am thinking to load line by line and then split data into different objects in Transfer rules.
The Records looks like:
*009785499     BC               2988              244        772       200
*000000033     AB                     0                  0            0           0
*000004533    EE                     8                  3            2           4
Now I want data to split like:
Field1 = 009785499
Field2 = BC
Field3 = 2988
Field4 = 244
Field5 = 772
Field6 = 200
After 1st line load, go to 2nd line and split the data as above and so on. Could you help me with the code pleaseu2026?
Is it a good design to load data? Any other idea?
Thanks.

Hi Mau,
First capture the data into the internal table (say itab).
Loop at itab.
it_final-field1 = itab+1(9).
it_final-field2 = itab+12(2).
it_final-field1 = itab+16(4).
it_final-field1 = itab+21(3).
it_final-field1 = itab+25(3).
it_final-field1 = itab+29(3).
Append it_final.
Endloop.
&*********** Reward Point if helpful**********&

How to split a single file and then route it to different systems

Hi All,
I have a requirement like...my incoming file(single file) needs to be split into 3 files based on a field "company code".and then route it into different systems.
my incoming file is like this .....
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
I need to split this file and my ouput file should be like this
For 1st system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
EOF.
For 2nd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
EOF.
For 3rd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
and then send it three systems based on company code.
Can anyone tell me how this can be achieved?
Thanks,
Hemanth.

Hi Nallam,
I tried the same thing but in the input file as there are different company codes,It is not splitting the file into three parts and sending only concerned data to repective system instead the whole file is going to the all the systems.
I came to know that the file has to splitted in the mapping only, we are able to do it by using mapping but the problem is in Routing,as in receiver determination we makes use of source structure for giving the condition. Can you please help me on this.
Thanks,
Hemanth.

Split data into different fields in TR

I have a flat file with space (multiple spaces between different fields) as a delimiter. The problem is, file is coming from 3rd party and they don't want to change the separator as comma or tab delimited CSV file. I have to load data in ODS (BW 3x).
Now I am thinking to load line by line and then split data into different objects in Transfer rules.
The Records looks like:
*009785499 ssss BC sssss 2988 ssss 244 sss 772 sss 200
*000000033 ssss AB ssss        0 ssss   0 ssss 0 ssss 0
*000004533 ssss EE ssss        8 ssss   3 ssss 2 ssss 4
s = space
Now I want data to split like:
Field1 = 009785499
Field2 = BC
Field3 = 2988
Field4 = 244
Field5 = 772
Field6 = 200
After 1st line load, go to 2nd line and split the data as above and so on. Could you help me with the code pleaseu2026?
Is it a good design to load data? Any other idea?
I appreciate your helps..

Hi,
Not sure how efficient this is, but you can try an approach on the lines of this link /people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
Make your transfer structure in this format. Say the length of each line is 200 characters. Make the first field of the structure of length 200. That is, the length of Field1 in the Trans Struc will be 200.
The second field can be the length of Field2 as you need in your ODS, and similarly for Field3 to Field6. Load it as a CSV file. Since there are no commas, the entire line will enter into the first field of the Trans Structure. This can be broken up into individual fields in the Transfer Rules.
Now, in your Start Routine of transfer rules, write code like this (similar to the ex in the blog):
Field-symbols <fs> type transfer-structure.
Loop at Datapak assigning <fs>.
    split <fs>-Field1 at 'ssss' into <fs>-field1 <fs>-field2 <fs>-field3....
    modify datapak from <fs>
endloop.
Now you can assign Field1 of Trans Struc to Field1 of Comm Struc, Field2 of Trans Struc to Field2 of Comm Struc and so on.
Hope it helps!
Edited by: Suhas Karnik on Jun 17, 2008 10:28 PM

Can I drag and drop single photos into Events?

Hi guys. I've very recently ordered a new Mac that will have iLife 08 on it. Before I get started with it I've got a question about Events. I've been using iPhoto for the last several years, organizing my photos into albums. I've cleaned up my images to around 1,000 photos, and I plan to only use events for organization. (I don't want to use Events AND albums, don't see the point, I'm going to try using ONLY Events.) But I've got a few scenerios that I'd like to throw by you all, to see if they would work, as I'm hoping that they will...
I don't shoot photos into pre-defined "Events", I shoot photos by what I feel like shooting. "Hey, my dog is doing something funny" - There's 3 pictures, or "Wow that's a big spider!" - 1 picture, or "My little neice is doing something cute" - There's 4 pictures. I do not want 450 events, each containing 1 - 5 pictures.
Can I drag and drop single pictures into different events? For example, have an Event called "Friends" with pictures of my friends in it, that I put there? Or an event called "Concerts" with photos taken throughout the years?
I hope I've made it clear what I'm looking to get out of Events!
Thanks in advance for any help.

Exactly - I think he will want to matain his existing structure -- people are making too much of the name change from rolls to events.
I have events with one photo and events with as many as 2000 photos -- I like this better than rolls but albums, folders and keywords are still the key to granular organization - events are ust the library to hold my photos
To me it is a small step forward that makes organization much easier (and it was not that hard before)
Larry Nebel
PS - now if I could just get all of my edits to save - where are TD and OT to solve that one for me?

Compile and run java programs in different directroy

Hi,
I often encounter many problems when I run java programs in the different directories. Like
javac -d dir_name a.java
java -cp dir_name a
Something wired often happens, such as, there is not a.java file in some directory, but javac -d dir_name a.java can still work or "java -cp dir_name a" often doesn't work. Moreover, file_name.jar is also a tough problem and solving compiling problems is often time-consuming.
So I hope to read something about how to compile and run java programs in different directory properly.
Could you pleae give me a detailed description for that or recommend a book or website?
Thanks a lot.

Can you post a small amount of code that does not work, including the directory structure, and the error messages? Some one here can likely explain the problem.

SAP GoLive : File System Response Times and Online Redologs design

Hello,
A SAP Going Live Verification session has just been performed on our SAP Production environnement.
SAP ECC6
Oracle 10.2.0.2
Solaris 10
As usual, we received database configuration instructions, but I'm a little bit skeptical about two of them :
1/
We have been told that our file system read response times "do not meet the standard requirements"
The following datafile has ben considered having a too high average read time per block.
File name -Blocks read - Avg. read time (ms) -Total read time per datafile (ms)
/oracle/PMA/sapdata5/sr3700_10/sr3700.data10 67534 23 1553282
I'm surprised that an average read time of 23ms is considered a high value. What are exactly those "standard requirements" ?
2/
We have been asked to increase the size of the online redo logs which are already quite large (54Mb).
Actually we have BW loading that generates "Chekpoint not comlete" message every night.
I've read in sap note 79341 that :
"The disadvantage of big redo log files is the lower checkpoint frequency and the longer time Oracle needs for an instance recovery."
Frankly, I have problems undertanding this sentence.
Frequent checkpoints means more redo log file switches, means more archive redo log files generated. right ?
But how is it that frequent chekpoints should decrease the time necessary for recovery ?
Thank you.
Any useful help would be appreciated.

Hello
>> I'm surprised that an average read time of 23ms is considered a high value. What are exactly those "standard requirements" ?
The recommended ("standard") values are published at the end of sapnote #322896.
23 ms seems really a little bit high to me - for example we have round about 4 to 6 ms on our productive system (with SAN storage).
>> Frequent checkpoints means more redo log file switches, means more archive redo log files generated. right?
Correct.
>> But how is it that frequent chekpoints should decrease the time necessary for recovery ?
A checkpoint is occured on every logswitch (of the online redologfiles). On a checkpoint event the following 3 things are happening in an oracle database:
Every dirty block in the buffer cache is written down to the datafiles
The latest SCN is written (updated) into the datafile header
The latest SCN is also written to the controlfiles
If your redologfiles are larger ... checkpoints are not happening so often and in this case the dirty buffers are not written down to the datafiles (in the case of no free space in the buffer cache is needed). So if your instance crashes you need to apply more redologs to the datafiles to be in a consistent state (roll forward). If you have smaller redologfiles more log switches are occured and so the SCNs in the data file headers (and the corresponding data) are closer to the newest SCN -> ergo the recovery is faster.
But this concept does not really fit the reality because of oracle implements some algorithm to reduce the workload for the DBWR in the case of a checkpoint.
There are also several parameters (depends on the oracle version) which control that a required recovery time is kept. (for example FAST_START_MTTR_TARGET)
Regards
Stefan

How can I move all my bookmarks from different Firefox profiles into one area to organize them and then place them into the different Firefox profiles?

How can I move all my bookmarks from different Firefox profiles (would like to move whole bookmark folders at once if possible) into one area to organize them and then place them into the different Firefox profiles? This is all under one window user account, I am using windows 8.1. Even if you have information on how to do it on a different windows, it may still be helpful. Thanks for any input you have.

Just a note about the difference between these two things:
* "export" and "import" use an ancient HTML document format that all browsers can understand. When you import bookmarks, Firefox may place them into an Imported Bookmarks folder, or into Unsorted Bookmarks. This does not displace existing bookmarks, and Firefox does not automatically remove duplicates.
* "backup" and "restore" use a more comprehensive JSON data file, which contains extra information about your bookmarks (such as tags) not contained in the traditional export file. HOWEVER, a restore completely replaces all existing bookmarks, so the restore feature cannot be used to merge in a set of additional bookmarks.
Related support articles:
* [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
* [[Import Bookmarks from a HTML file]]
* [[Restore bookmarks from backup or move them to another computer]]
Some users find the disk-based Windows Favorites folder a convenient way to organize bookmarks. If you do, too, and you do not need to preserve tags on your bookmarks, you could export each profile's bookmarks to HTML and import them all into IE11. Organize them in the Windows Favorites folder, then export from IE11 to HTML and import that file into each Firefox profile. See: [http://windows.microsoft.com/en-us/internet-explorer/add-view-organize-favorites].

TS1420 I updated my ipod to 5.1.1 and now it wont sync downloaded music onto my ipod. All the music I purchased through itunes went on the ipod during backup restore and my downloaded music went into my itunes library but won't sync onto my ipod.

I updated my ipod touch to 5.1.1 and did a system restore. All of my purchased music from itunes went back on along with photos and apps but now it won't let me sync music that I downloaded. All of my music that was imported from cd's synced but not my downloaded music from internet. They went into my itunes library but they are a light gray and have a little sync symbol next to them. I've tried dragging them into different folders but nothing is working. I read that others were having problems with this update but didn't get any answers.

After you have updated your device to version 5.1.1, have you tried resyncing everything from your iTunes yet?

Ok my Ipod touch 5th generation will not turn on, and i have tried other steps i have seen like holding down different buttons and try to restore but it will not restore and no matter how long i hold down a button it wont turn on

My ipod tocuh 5th generation battery died so i went to charge it and i would not charge so i did some reasearch and tried many steps such as hold down the buttons for a long time but nothing happened then i tried to restore it and it wont let it, it just comes up with error 1602 and ims cared i dont know what to do please HELP.

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS

Restoring Rman backup on New Host with different directory structure

Hi,
I have a following scenario to clone the database.
1. clone the database on new server
2. source is non - ASM and target is ASM
3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to different directory structure
4. source is running on 32-bit Linux two node Rac and Target is running on 64-bit Linux two node Rac
I did the following steps and getting below error:
1. I copied incremental Level 0 backup to target server(where we need to build new db) to different directory structure
2. On target i created pfile and build the instance, as dbf file are in multiple locations in source i put following tow parameters in init.ora of target database
*.db_file_name_convert =(/u02/oradata/app1p/,+QADATA2/udev/datafile),(/u03/oradata/app1p/,+QADATA1/udev/datafile),(/u12/oradata/app1p/,+QADATA1/udev/datafile,),(/u99/oradata/app1p/,+QADATA1/udev/datafile),(/u09/oradata/app1p/,+QADATA1/udev/datafile),(/u14/oradata/app1p/,+QADATA1/udev/datafile),(/u07/oradata/app1p/,+QADATA1/udev/datafile),(/u06/oradata/prod/,+QADATA1/udev/datafile'),(/u05/oradata/app1p/,+QADATA1/udev/datafile)
*.log_file_name_convert =("/u99/oradata/app1p/","+QADATA2/udev/onlinelog/")
3. connected to rman -->> started db in nomount -->> restored the controlfile --> cataloged the backup piece and then i am trying to restore
All the above steps i did using the Doc id *How To Restore Rman Backups On A Different Node When The Directory Structures Are Different [ID 419137.1]*
script i am using is :
RMAN> run {
2> set until time "to_date('DEC/20/2010 05:30:00','Mon/DD/YYYY HH24:MI:SS')";
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> allocate channel c3 device type disk;
6> allocate channel c4 device type disk;
7> set newname for datafile 1 to '+QADATA1/UDEV/DATAFILE';
8> set newname for datafile 2 to '+QADATA1/UDEV/DATAFILE';
9> set newname for datafile 3 to '+QADATA1/UDEV/DATAFILE';
10> set newname for datafile 4 to '+QADATA1/UDEV/DATAFILE';
11> set newname for datafile 5 to '+QADATA1/UDEV/DATAFILE';
12> set newname for datafile 6 to '+QADATA1/UDEV/DATAFILE';
13> set newname for datafile 54 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 63 to '+QADATA1/UDEV/DATAFILE';
14> 15> set newname for datafile 67 to '+QADATA1/UDEV/DATAFILE';
16> set newname for datafile 68 to '+QADATA1/UDEV/DATAFILE';
17> set newname for datafile 50 to '+QADATA1/UDEV/DATAFILE';
18> set newname for datafile 39 to '+QADATA1/UDEV/DATAFILE';
19> set newname for datafile 38 to '+QADATA1/UDEV/DATAFILE';
20> set newname for datafile 7 to '+QADATA1/UDEV/DATAFILE';
21> set newname for datafile 9 to '+QADATA1/UDEV/DATAFILE';
22> set newname for datafile 8 to '+QADATA1/UDEV/DATAFILE';
23> set newname for datafile 11 to '+QADATA1/UDEV/DATAFILE';
24> set newname for datafile 10 to '+QADATA1/UDEV/DATAFILE';
25> set newname for datafile 66 to '+QADATA1/UDEV/DATAFILE';
26> set newname for datafile 48 to '+QADATA1/UDEV/DATAFILE';
27> set newname for datafile 47 to '+QADATA1/UDEV/DATAFILE';
28> set newname for datafile 12 to '+QADATA1/UDEV/DATAFILE';
29> set newname for datafile 13 to '+QADATA1/UDEV/DATAFILE';
30> set newname for datafile 14 to '+QADATA1/UDEV/DATAFILE';
31> set newname for datafile 15 to '+QADATA1/UDEV/DATAFILE';
32> set newname for datafile 16 to '+QADATA1/UDEV/DATAFILE';
33> set newname for datafile 18 to '+QADATA1/UDEV/DATAFILE';
34> set newname for datafile 17 to '+QADATA1/UDEV/DATAFILE';
35> set newname for datafile 19 to '+QADATA1/UDEV/DATAFILE';
36> set newname for datafile 69 to '+QADATA1/UDEV/DATAFILE';
37> set newname for datafile 60 to '+QADATA1/UDEV/DATAFILE';
38> set newname for datafile 59 to '+QADATA1/UDEV/DATAFILE';
39> set newname for datafile 55 to '+QADATA1/UDEV/DATAFILE';
40> set newname for datafile 53 to '+QADATA1/UDEV/DATAFILE';
41> set newname for datafile 44 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 22 to '+QADATA2/UDEV/DATAFILE';
42> 43> set newname for datafile 21 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 20 to '+QADATA2/UDEV/DATAFILE';
44> 45> set newname for datafile 72 to '+QADATA2/UDEV/DATAFILE';
46> set newname for datafile 70 to '+QADATA2/UDEV/DATAFILE';
47> set newname for datafile 65 to '+QADATA2/UDEV/DATAFILE';
48> set newname for datafile 64 to '+QADATA2/UDEV/DATAFILE';
49> set newname for datafile 57 to '+QADATA2/UDEV/DATAFILE';
50> set newname for datafile 56 to '+QADATA2/UDEV/DATAFILE';
51> set newname for datafile 49 to '+QADATA2/UDEV/DATAFILE';
52> set newname for datafile 45 to '+QADATA2/UDEV/DATAFILE';
53> set newname for datafile 26 to '+QADATA2/UDEV/DATAFILE';
54> set newname for datafile 25 to '+QADATA2/UDEV/DATAFILE';
55> set newname for datafile 24 to '+QADATA2/UDEV/DATAFILE';
56> set newname for datafile 23 to '+QADATA2/UDEV/DATAFILE';
57> set newname for datafile 27 to '+QADATA2/UDEV/DATAFILE';
58> set newname for datafile 28 to '+QADATA2/UDEV/DATAFILE';
59> set newname for datafile 29 to '+QADATA2/UDEV/DATAFILE';
60> set newname for datafile 30 to '+QADATA2/UDEV/DATAFILE';
61> set newname for datafile 73 to '+QADATA2/UDEV/DATAFILE';
62> set newname for datafile 32 to '+QADATA2/UDEV/DATAFILE';
63> set newname for datafile 31 to '+QADATA2/UDEV/DATAFILE';
64> set newname for datafile 34 to '+QADATA2/UDEV/DATAFILE';
65> set newname for datafile 33 to '+QADATA2/UDEV/DATAFILE';
66> set newname for datafile 35 to '+QADATA2/UDEV/DATAFILE';
67> set newname for datafile 36 to '+QADATA2/UDEV/DATAFILE';
68> set newname for datafile 37 to '+QADATA2/UDEV/DATAFILE';
69> set newname for datafile 51 to '+QADATA2/UDEV/DATAFILE';
70> set newname for datafile 43 to '+QADATA2/UDEV/DATAFILE';
71> set newname for datafile 40 to '+QADATA2/UDEV/DATAFILE';
72> set newname for datafile 41 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 71 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 58 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 52 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 46 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 42 to '+QADATA2/UDEV/DATAFILE';
73> 74> 75> 76> 77> 78> set newname for datafile 62 to '+QADATA2/UDEV/DATAFILE';
79> set newname for datafile 61 to '+QADATA2/UDEV/DATAFILE';
80> set newname for datafile 74 to '+QADATA2/UDEV/DATAFILE';
81> restore database;
82> switch datafile all;
83> recover database;
84> alter database open resetlogs;
85>
86> release channel c1;
87> release channel c2;
88> release channel c3;
89> release channel c4;
90> }
Getting the following error, copied lines from the error i am getting.
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 27-DEC-10
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/27/2010 08:09:08
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 74
RMAN-06100: no channel to restore a backup or copy of datafile 73
Please advice...
Thanks,
Tanveer Mohammed

If you would like, please refer the link:-
http://gavinsoorma.com/2010/04/creating-an-asm-duplicate-database-from-a-non-asm-database/

When I try to cut and paste my resume into an online job website the reume' will not highlight ( select All), any ideas?

When I try to cut and paste my resume' into an online job website it will not highlight, ( select all), I can click and drag it into the empty box but then it becomes an attachment. What am I doing wrong? Help!

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

Restore and apply online redologs into different directory

Similar Messages

Maybe you are looking for