Install JRE and OpenJDK Side-by-Side [Unecessary - So Solved]

As far as I know this is impossible, but if there is a way to install JRE and OpenJDK side-by-side, that would be great.
The reason I would like this is that there is a specific webserver I access that simply will not work with OpenJDK. It's a known issue that may or may not be fixed any time soon. On the other hand, I would like to install freeCAD, but this depends on OpenJDK and not JRE.
So as of right now, there is no way for me to have freeCAD installed and access this webserver. Now if JRE and OpenJDK were installed side by side, then this wouldn't be a problem. The other option, is letting users install freeCAD with and OpenJDK or JRE dependency, whichever best suits them.
Is anybody else in a similar boat as this?
Last edited by fini_fly (2009-12-17 16:56:07)

tdy wrote:
fini_fly wrote:I would like to install freeCAD, but this depends on OpenJDK and not JRE.
Where do you see this requirement? I don't see anything that specifically depends on openjdk6. The only java deps I see are in opencascade. It depends on java-runtime and makedepends on java-environment, which can be satisfied by jre + jdk.
When I went to install, it was forcing me to install OpenJDK and uninstall JRE.

Similar Messages

Installed jre and jdk and setup environment variable

installed jre and jdk and setup environment variable but still i am not able to rum program?
cannot find symbol class string
package system does not exist

if removing 1 jre will help your disk space problems
then you urgently need a bigger disk.
Btw i never notice Java installing 2 different JRE's
so i dont think it will harm remvong one, make sure
you dont delete one you are using :)I assume that you don't run MS os; that's the only one that installs 2 JRE's.
To OP: This has been discussed by Sun, but no changes have been announced. Maybe the relocation in version 1.5 of the private (aka developer) code to the Program Folder is a start of this change?

Install jre and mysql by wizard

hi all.
I don't know it is the right place that I'm talking about or not.
I have project that created by java swing controls and it has MySQL database. I want to create an installation wizard for my project.
I want to install JRE and MySQL into installation wizard(not separately). any idea?
thank for your attention.

847289 wrote:
I've just take a look on the documentation but I didn't see anything about MySQL.
Could you please give me a tutorial about this?No, that's your job to figure it out. If IzPack doesn't work, investigate others. I'm pretty sure there is no installer out there that will specifically offer an installation of MySQL however; more likely you'll need to be able to fork a new process to run the MySQL installer.

Installing JRE and webserver on client machine

I want to deploy J2se application having tomcat webserver and mysql database.This application is to be installed on client's machine from CD as a single-click application.How can we setup JRE and webserver using JavaWebStart?
Is it possible to install JRE using WebStart?This is most urgent requirement for us.Any who worked on it?Pease help!!!!

You need a JRE installed to run Java WebStart (because Java WebStart is a Java program itself). However, this does not need to be the same JRE that your application uses, because you can specify the JRE to use in your JNLP file and Java WebStart will automatically (most of the time) download and install the correct JRE.
As to the original question of installing a webserver and database on the client: you will have to distribute both as (or in) one or more jar file (which are likely to be quite large), unpack the jar file(s) on the local machine and then run an installation script, using Runtime.exec(). This requires the user to grant "all-permissions" to your WebStart app, as well a fool-proof installation script for the webserver and database.
Webstart may not be the ideal solution for your situation. If the users are always connected to the network, why the local webserver and database (can't they just use one connected to the net)? If the users aren't connected to a network, why Webstart?

CS 3 gets error saying can't install -incomplete or damaged files. This CD has only been installed once and it was a puzzle that I solved years ago and I am up against the same puzzle now. How to I properly proceed with the install on an iMac i5 OS 10.10.

The first question I asked is the same as this one. I have read the PDF and down what it says but it won't get past the error message. The CD is fine and I went through this a long while ago. 2006 I believe. I just set this iMac up last night and there shouldn't be a problem with the Mac or the CD.

The first question I asked is the same as this one. I have read the PDF and down what it says but it won't get past the error message. The CD is fine and I went through this a long while ago. 2006 I believe. I just set this iMac up last night and there shouldn't be a problem with the Mac or the CD.

Installing JRE on JumpDrive? Possible?

What I am looking for is not a standard setup but it is very useful. I am wondering if it is possible at all.
I like jedit and use it as my editor. I also have to work on many different (Windows) computers. I started by installing JRE and Jedit on the different computers I use but it is becoming not practical when the number grow.
Is it possible to install JRE as a stand alone program and together with a Java program on a jumpdrive. Then I can just carry my jumpdrive to different computers and use the java program. This will provide a cleaner separation between the Java environment and the host OS environment..
Appreciate any comments.

Thanks for your qucik reply. If I can get JRE and Jedit working on my jumpdrive, it will be great and save me a lot of time. I am a new user so I might be asking some obvious questions here.
My question is : What is the difference between integrating JRE with IE and JRE with Jedit? If I run JRE as a stand alone program then will Jedit link to the JRE properly? Anyone care to comment on what the standard installation program does to provide the integration? I guess it is more than just copying files.
What happens if there is another JRE running already? maybe the same or different version of JRE as the one on my jump drive.
Thanks for your help.
Ken.

Azure Tools and Templates Not Installed to VS2012 with VS2013 Side by Side Installation

I have VS 2012 and VS 2013 Ultimate editions installed side by side and have installed Azure SDK 2.2 followed by 2.3. Until I started using BizTalk Services all my Azure work has been in VS2013.
Going back to VS2012 for BizTalk Services stuff I soon noted I have no Azure node in Server Explorer and then looked and see that there are no Azure project templates either. I might guess the Azure SDKs just configure the latest VS instance.
How can I get the Azure SDK to properly config VS2012 when I have VS2013 installed?

hi,
Thank you for sharing your solutions and experience here. It will be very beneficial for other community members who have similar questions. If you have any difficulty in future programming, we welcome you to post in forums again.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Camera Raw 6.7 and 7.4 side-by-side?

Hello,
I have a Create Suite 5 Web Premium installed, which includes Photoshop CS5 and Camera Raw 6.7.
I just purchased InDesign creative cloud single product subscription, and downloaded InDesign CS6. The Adobe Application Manager is now offering to install Photoshop Camera Raw 7.4. I am not sure why, since I do not have Photoshop CS6, probably because InDesign comes with Bridge CS6…
What will happen if I download Camera Raw 7.4? Will it replace the Camera Raw 6.7, or can I use them side-by-side?
Will Camera Raw 7.4 be even fictional (since I do not have Photoshop CS6)?
Thank you

It is here (in the Camera Raw dialog, not Bridge):
From the Help:
The process version is the technology that Camera Raw uses to adjust and render photos. Depending on which process version you use, different options and settings area available to you in the Basic tab and when you make local adjustments.
Process Version 2012
Images edited for the first time in Camera Raw 7 use process version 2012. PV2012 offers new tone controls and new tone-mapping algorithms for high-contrast images. With PV2012, you can adjust Highlights, Shadows, Whites, Blacks, Exposure, and Contrast in the Basic panel. You can also apply local corrections for white balance (Temp and Tint), Highlights, Shadows, Noise, and Moiré.
Process Version 2010
Images edited in Camera Raw 6 used PV2010 by default. PV2010 offers improved sharpening and noise-reduction from the previous process version, PV2003.
Process Version 2003
The original processing engine, used by Camera Raw versions 5.x and earlier.
To take advantage of the newer processing, you can update previously edited photos to the current process version. To update a photo to the Camera Raw 7 process (PV2012), do either of the following:
Click the Update to Current Process button (the exclamation-point icon) in the lower-right corner of the image preview. In the Camera Calibration tab, choose Process > 2012 (Current).To apply an older process version to a photo, go to the Camera Calibration tab and choose Process > 2010 or Process > 2003.
But, if can't launch Camera Raw, I guess this isn't much help.

How to Install SSIS COM Component on Client side

Hi,
I am new to BPC.
I can't install SSIS COM Component on Client side.
and i guess, it lead BPC Excel , Data Manager is not working.
Because all the user are local user on server side, no domain
I have run OSoftSetup.exe, but the result is
Error (Login failed for user ". The user is not associated with a trusted SQL Server connection.)
i have tried to change the OutlookSoft.config in OSoftSSIS_Client\Bin Folder
and the config doesn't take any effect.
How to How to Install SSIS COM Component on Client side?
thx
It is client side PC_MS\Logging\Log
#ERROR#CustomXMLClt##EPM-BPC-MS##e17c2022-c7d4-4a0b-8515-b719441e3dbf###XMLParser : GetTagValue#hostname
user########Plain##[LOG ID:22]System.NullReferenceException: Object reference not set to an instance of an object.
   at OSoft.Consumers.Common.CustomXML50.XMLParser.GetAttributeValue(String strKeyValue, String strAttKeyValue, String strSubKeyValue)#
thx
John

But the problem is...in client side
When opening Office 2007 Excel -> eTool -> Data Manager
There have no option showed.
and in C:\Documents and Settings\<user>\My Documents\PC_MS\Logging\Log
it has following error.
2010 08 21 17:15:35:875#+8:00#ERROR#CustomXMLClt##EPM-BPC-MS##51cea66a-13cd-49fc-afdd-7b492566bd12###XMLParser : GetTagValue#<HOSTNAME>
BPCADM########Plain##[LOG ID:346]System.NullReferenceException: Object reference not set to an instance of an object.
   at OSoft.Consumers.Common.CustomXML50.XMLParser.GetAttributeValue(String strKeyValue, String strAttKeyValue, String strSubKeyValue)#
2010 08 21 17:15:35:875#+8:00#ERROR#DMClientTools##EPM-BPC-MS##7aec1fbe-5fda-4c91-9c4a-1eec5e59911b###DMTools::ErrCheck#<HOSTNAME>
BPCADM########Plain##[LOG ID:347]System.Exception: 91: Object reference not set to an instance of an object.
   at OSoft.Consumers.DataMgr.DMClientTools50.DMTools.ErrCheck(String strRtn)#
2010 08 21 17:15:35:875#+8:00#ERROR#DMClientTools##EPM-BPC-MS##48f5a612-a046-4ef9-a56c-db565ef489d2###DMTools::GetServerInfo#<HOSTNAME>
BPCADM########Plain##[LOG ID:348]System.Exception: 91: Object reference not set to an instance of an object.
   at OSoft.Consumers.DataMgr.DMClientTools50.DMTools.ErrCheck(String strRtn)
   at OSoft.Consumers.DataMgr.DMClientTools50.DMTools.GetServerInfo(String strContext, String strFilter, String strSecurity)#
2010 08 21 17:15:35:890#+8:00#ERROR#DMConsole##EPM-BPC-MS##af7f7343-1cb2-4802-a667-2adbb1b8e2fd###basClientTools::ChangeClientSiteList#<HOSTNAME>
BPCADM########Plain##[LOG ID:349]Subscript out of range#

"Side-by-side configuration is incorrect" when trying to install MS DirSync tool

Apologies if this is the wrong thread, but it seems like every thread is the wrong thread for this one :) Yes, I've checked all the other "side-by-side configuration" threads, but none of them seems to apply to this case.
I have a SBS 2012 machine, acting as DC, AD DS and DNS, and our organization has recently signed up for Office 365 Online E1, and we've migrated our mail there. Everything is set up, but now I'd like to sync our AD with MS Online. I enabled directory
sync in the admin user and group controls on the Office 365 site and as per instructions, I downloaded the latest version of DirSync from here:http://social.technet.microsoft.com/wiki/contents/articles/18429.microsoft-azure-active-directory-sync-tool-version-release-history.aspx.
However, when I try to install it on the server, I get this error message: "The application has failed to start because its side-by-side configuration is incorrect. Please run sxtrace or see the application event log for more detail."
Sxtrace gives the following results:
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = AMD64
CultureFallBacks = en-US;en
ManifestPath = N:\temp\dirsync.exe
AssemblyDirectory = N:\temp\
Application Config File =
INFO: Parsing Manifest File N:\temp\dirsync.exe.
INFO: Manifest Definition Identity is (null).
ERROR: Line 0: XML Syntax error.
ERROR: Activation Context generation failed.
End Activation Context Generation.
Things I've tried:
Other posts seem to indicate that it's often an issue with missing visual C++ libraries, but I installed both the 2008 and 2010 C redistributables for x86 and x64, and nothing has changed.
One solution for a similar message had a typographical error in an xml configuration file, however in this case the "Application config file" field is blank.
As several other (non TN threads) around the 'net recommend, I ran SFC. It appears to work for others with the same error message. It fixed some issues and spit out a huge log file, but the problem persists, and I don't know where in the log
file to look, assuming anything in there is relevant (the file is over 700kb, so I'm not going to start spamming big chunks of it just yet unless I know what to look for).
The problem seems to come up in the context of software development (another thread on this subject is about the user developing an application from scratch) but I have no background in software dev, and this is supposed to be an official tool from Microsoft,
for crying out loud, not some homebrew thing I'm putting together.
This one issue is keeping us from moving ahead with our entire plan for user access, so any help would be
much appreciated. Thanks!!!

Hi AGrush,
Based on your description, did you mean that attempt to install Microsoft Azure Active Directory Sync tool
on Windows Server 2012 Essentials?
The Azure Active Directory Sync tool should be installed on a computer which isn't a domain controller. For
more details, please refer to the System requirements in the following KB.
How to troubleshoot Azure Active Directory Sync tool installation
and Configuration Wizard error messages
In addition, I’m a little confused that why install DirSync (That is what the Windows Server Essentials Office
365 integration is for) on Windows Server 2012 Eseentails.
Manage Office 365 in Windows Server Essentials
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

TS3212 I get a side-by-side error when trying to install iTunes to Windows 7 64-bit???

When trying to install iTunes to Windows 7 64-bit, I get a side-by-side error. Has anyone else seen this problem and were you able to resolve installing iTunes? If so, how did you resolve it?

Hi
Hope you are fine there!
recommend that you attempt to resolve this issue by uninstalling iTunes and QuickTime, and then reinstalling the latest version of each. To do this, first ensure that you are logged in to an Administrator user account on your computer, then follow the instructions in the appropriate article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7:
http://support.apple.com/kb/HT1923
Removing and reinstalling iTunes, QuickTime, and other software components for Windows XP:
http://support.apple.com/kb/HT1925
Take care!

Side By Side Configuration Error Windows 7 64 bit and SQL SERVER 2008 R2

Hi,
I keep getting the side by side error... I tried installing the patches, and service packs i reinstalled sql server 2008 r2 like 10 times. It won't go away. I tried the registry edit a few people say works. This has been killing me for a week now,
I cannot run my sql server on my machine its crazy..???
Please help
thanks, NIck
Activation context generation failed for "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe". Dependent Assembly Microsoft.VC80.ATL,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053"
could not be found. Please use sxstrace.exe for detailed diagnosis.
Log Name:      Application
Source:        SideBySide
Date:          2/16/2014 10:36:55 PM
Event ID:      33
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Nick-PC
Description:
Activation context generation failed for "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe". Dependent Assembly Microsoft.VC80.ATL,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053"
could not be found. Please use sxstrace.exe for detailed diagnosis.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SideBySide" />
    <EventID Qualifiers="49409">33</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-17T03:36:55.000000000Z" />
    <EventRecordID>505191</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Nick-PC</Computer>
    <Security />
</System>
<EventData>
    <Data>Microsoft.VC80.ATL,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053"</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>

Hi NickDeNora,
According to your description, we need to verify if you install
Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) and
correct the manifest file. The manifest file is readable (although empty), but we cannot edit it (even if you are an administrator). Only SYSTEM has access to the file. So to be able to edit it, you must first take ownership of
it and grant ACLs. After saving the file, then run the setup again.
For more information , see:
http://blogical.se/blogs/johan/archive/2012/06/23/sql-server-vc-installation-voes.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Trying to understand CF side-by-side installations (CF9 and CF11)

I'm testing my upgrade from CF9 to CF11 on the same server. Looks like my old CF9 installation was an enterprise, standard, IIS installation. (if that makes sense to you) My CF11 is an enterprise, production + secure, stand-alone installation. It appears that I had to choose the stand-alone installation with internal web server so it can diferentiate between the two Cold Fusions adn do side-by-side installation. We want to use the internal web server anyhow so we can use the built-in Tomcat server instead of having to install a separate one. Now the question has come up, how do I get all of my web pages that are on IIS into my current ColdFusion. I discovered a document that discusses the Web Server Management. It looks like I can run it now and it will configure my connection between IIS and ColdFusion.
https://wikidocs.adobe.com/wiki/display/coldfusionen/Web+Server+Management
My question is, can this be done while CF9 is still up and running and then it would give me a CF11 ran instance of using the CF webpages so I can test them and get them to work. Someone was thinking that IIS wouldn't be able to figure out which CF administrator to use. Two CF applications cannot use IIS at the same time. If so, how do I get the two systems to run side-by-side using my CF pages, so I can test if anything broke and needs to be changed in the code, and/or test any of the new capabilities in CF11?
Thanks in advance!!

It can be done, but it is not necessarily for the faint of heart. I haven't done it in quite some time. Here are the basics:
Figure out which ports CF 9 is using.
Install CF11 using the built-in web server first (don't connect it to IIS). Make sure CF 11 is not trying to use the same ports as CF 9.
Run the CF9 Web Server Connection Tool. See if you have "all sites" configured. If you do, remove the connector and reinstall individually to the sites you want CF9 to operate. Make sure your sites operate properly before moving on.
If you want to have the same site code run under both CF9 and CF11, you'll need to copy the directory of the CF9 site to a new directory for CF11 (e.g.: D:\sites\MySite -> D:\sites\MySite2)
Run the CF11 Web Server Connection Tool. Connect your CF11 site (D:\sites\MySite2) to IIS.
Repeat 4&5 for each site you are parallel testing with CF11.
I'd do a Google search on "install multiple versions of ColdFusion", as there are several blog articles involving previous versions of ColdFusion. If you find one that shows CF9 paired with CF10, it should be pretty much the same for CF9 and CF11.
If it were me, though, I'd spin up a virtual machine, copy the site code in, and install CF11. I would then do extensive testing, fix code that breaks, then when once I was satisfied CF11 is working fine, copy the code updates back to my production server and do an upgrade install of CF11 to replace CF9.
-Carl V.

Crystal reports 7 and 9 (side by side)

Good morning everyone:
We have and old VB6 application that uses CR7 in one PC. We built a Windows .Net app that uses CR9. When installing the .net application, some of the CR7 dlls were replaced with the CR9 version (same names). This caused the VB6 app to stop working (because its dlls were not found anymore).
Is there anyway to allow CR7 and CR9 to live side by side? I mean, I would like both of my apps (.net and VB6) to work on the same client machine...
Thanks for any tips or help!

Hello,
No, CR 7 did not support side by side installs. That didn't happen until CR 9 and above, meaning CR 9 and older can not be on the same PC.
You may be able to work around it though but I've never tried it, copy ALL of the dll's from \windows\crystal into the application folder and change the working folder in the Icon to the app folder where the EXE is. I doubt it will work worth a try.
Thank you
Don

Safari 2 and 3 side-by-side

I'm developing a web-application, that will release in future. So I'm testing it with Safari 3.0.3. When I got to a possible Customer (who had Safari 2) it was not working.
So I need a way to be able to test it in Safari 2 and 3. While at the moment there would be the way to use WebKit, this possibility will drop with release of OS 10.5 (which has Safari 3 installed as default browser). Also it would disable the Safari 3 engine for other applications than WebKit.
I need a way to use the Safari 2 engine in a sandbox (like WebKit does with the beta engine). It is no problem to use different versions of FireFox or Opera side-by-side (except using them at the same time). The only browser i know that has the same problem is IE (and even there it is possible using different versions)

I also posted this reply in http://discussions.apple.com/message.jspa?messageID=5752428#5752428
I've managed to make some progress!! In System Preferences > Network I looked at the DNS settings and noticed that the only entry there is my router's IP. Actually, that's how it's always been, and it's always worked fine like that... but just for the heck of it I clicked the "+" and added my ISP's actual DNS servers to the list, then applied the changes, and now I don't seem to be having the issue anymore...so far.
I've also done some testing: I removed the DNS settings and put them back with predictable results: When the new DNS entries are not present it can't access the websites; when I put them back I can access them.
Also relevant: I have two other computers on this network (1 Windows Vista and 1 Windows XP) and both are using the router's default DNS settings without any problems. The router is a 2Wire modem/router combo and the ISP is AT&T in Southern California.

Install JRE and OpenJDK Side-by-Side [Unecessary - So Solved]

Similar Messages

Maybe you are looking for