Install jre and mysql by wizard

hi all.
I don't know it is the right place that I'm talking about or not.
I have project that created by java swing controls and it has MySQL database. I want to create an installation wizard for my project.
I want to install JRE and MySQL into installation wizard(not separately). any idea?
thank for your attention.

847289 wrote:
I've just take a look on the documentation but I didn't see anything about MySQL.
Could you please give me a tutorial about this?No, that's your job to figure it out. If IzPack doesn't work, investigate others. I'm pretty sure there is no installer out there that will specifically offer an installation of MySQL however; more likely you'll need to be able to fork a new process to run the MySQL installer.

Similar Messages

Install JRE and OpenJDK Side-by-Side [Unecessary - So Solved]

As far as I know this is impossible, but if there is a way to install JRE and OpenJDK side-by-side, that would be great.
The reason I would like this is that there is a specific webserver I access that simply will not work with OpenJDK. It's a known issue that may or may not be fixed any time soon. On the other hand, I would like to install freeCAD, but this depends on OpenJDK and not JRE.
So as of right now, there is no way for me to have freeCAD installed and access this webserver. Now if JRE and OpenJDK were installed side by side, then this wouldn't be a problem. The other option, is letting users install freeCAD with and OpenJDK or JRE dependency, whichever best suits them.
Is anybody else in a similar boat as this?
Last edited by fini_fly (2009-12-17 16:56:07)

tdy wrote:
fini_fly wrote:I would like to install freeCAD, but this depends on OpenJDK and not JRE.
Where do you see this requirement? I don't see anything that specifically depends on openjdk6. The only java deps I see are in opencascade. It depends on java-runtime and makedepends on java-environment, which can be satisfied by jre + jdk.
When I went to install, it was forcing me to install OpenJDK and uninstall JRE.

Installed jre and jdk and setup environment variable

installed jre and jdk and setup environment variable but still i am not able to rum program?
cannot find symbol class string
package system does not exist

if removing 1 jre will help your disk space problems
then you urgently need a bigger disk.
Btw i never notice Java installing 2 different JRE's
so i dont think it will harm remvong one, make sure
you dont delete one you are using :)I assume that you don't run MS os; that's the only one that installs 2 JRE's.
To OP: This has been discussed by Sun, but no changes have been announced. Maybe the relocation in version 1.5 of the private (aka developer) code to the Program Folder is a start of this change?

Installing JRE and webserver on client machine

I want to deploy J2se application having tomcat webserver and mysql database.This application is to be installed on client's machine from CD as a single-click application.How can we setup JRE and webserver using JavaWebStart?
Is it possible to install JRE using WebStart?This is most urgent requirement for us.Any who worked on it?Pease help!!!!

You need a JRE installed to run Java WebStart (because Java WebStart is a Java program itself). However, this does not need to be the same JRE that your application uses, because you can specify the JRE to use in your JNLP file and Java WebStart will automatically (most of the time) download and install the correct JRE.
As to the original question of installing a webserver and database on the client: you will have to distribute both as (or in) one or more jar file (which are likely to be quite large), unpack the jar file(s) on the local machine and then run an installation script, using Runtime.exec(). This requires the user to grant "all-permissions" to your WebStart app, as well a fool-proof installation script for the webserver and database.
Webstart may not be the ideal solution for your situation. If the users are always connected to the network, why the local webserver and database (can't they just use one connected to the net)? If the users aren't connected to a network, why Webstart?

New install of mariadb and mysql-workbench - some questions

So I've installed mariadb along with mysql-workbench. These were fresh installs on a system which has never had mariadb/mysql installed previously. Per the Wiki, I installed mariadb and mysql-workbench, started and enabled the service, and ran the mysql_secure_installation script. I then added a non-root user and even imported a database into it. Everything seems fine, though I have never used either MySQL, mariadb, or mysql-workbench before.
I have a couple of questions:
Question 1:
When I run mysql-workbench, I have to run it with the command “gksudo mysql-workbench” or it comes up in a locked form that doesn't give me (user) access. I am presuming that this is simply because my user account is not a member of the mysql group and that if I changed that, I'd be able to run it with a simple “mysql-workbench” command.
The question is: Should I do that, or is there a good security reason to not have the user be a member of the mysql group? (Would the current setup (having to run “gksudo” be a problem if I installed the mariadb on my server (rather than locally) and mysql-workbench locally?)
The Wiki doesn't say anything about adding the user to the mysql group, so I don't know if that's just an implied standard practice, or if there is good reason not to do so.
Question 2:
When I try to connect to the database with mysql-workbench, it presents me with a password prompt, as expected, then I get a message box that says:
Incompatible/nonstandard server version or connection protocol detected (10.0.17).
A connection to this database can be established but some MySQL Workbench
features may not work properly since the database is not fully compatible
with the supported versions of MySQL.
MySQL Workbench is developed and tested for MySQL Server versions 5.1, 5.5, 5.6 and 5.7
Clicking “Continue Anyway” lets me in and connects everything up and seems to work fine. However, the tab at the top says “Local Instance 33061 - Warning - not supported”.
I presume this has something to do with the fact that I am running mysql-workbench as the front end not to MySQL, but mariadb - and functionality that I've tried seems to work fine.
So my question is: Is there more to this warning (should I be changing some default setting to make everything play nice), or is this just one of those warnings that mean nothing really, and everything IS playing nice already?
Thanks,
Andre

presume this has something to do with the fact that I am running mysql-workbench as the front end not to MySQL, but mariadb - and functionality that I've tried seems to work fine.
I think its probably as you say.
If everything is working fine don't worry.
I'm using php admin to control mariadb but i think there is not much difference between maradb and MySQL.
If problems appear you can always change to MySQL.

ANN: Setting up PHP and MySQL for newbies!

We've recently released two new solution recipes to help
designers make the
jump to building dynamic sites. Each solution recipe
describes step by step
how to set up PHP and MySQL on your XP or Vista systems. You
can find them
on the Solution Recipe page:
Installing PHP and MySQL on Windows Vista
Installing PHP and MySQL on Windows XP
http://www.webassist.com/professional/products/solutionrecipes.asp
Each of these Solution Recipes include PDFs that you can
print out or read
on screen.
We also have steps outlined for the Mac in PDF format, one
for 10.4.x and
the other for 10.5.x:
10.4.x:
http://www.webassist.com/media/professional/support/PDFs/InstallingPHP-OSX-10-4_PDF.pdf
10.5.x:
http://www.webassist.com/media/professional/support/PDFs/InstallingPHP-OSX-10-5_PDF.pdf
All content is freely available. Go get'em!
Best - Joe
Joseph Lowery
VP of Marketing, WebAssist -
http://www.webassist.com
Author, Dreamweaver CS3 Bible -
http://www.idest.com/dreamweaver/

Cool. I've bookmarked it for later.
Thanks!
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"Joseph Lowery" <[email protected]> wrote in
message
news:ftj87l$nem$[email protected]..
> We've recently released two new solution recipes to help
designers make
the
> jump to building dynamic sites. Each solution recipe
describes step by
step
> how to set up PHP and MySQL on your XP or Vista systems.
You can find them
> on the Solution Recipe page:
>
> Installing PHP and MySQL on Windows Vista
> Installing PHP and MySQL on Windows XP
>
http://www.webassist.com/professional/products/solutionrecipes.asp
>
> Each of these Solution Recipes include PDFs that you can
print out or read
> on screen.
>
> We also have steps outlined for the Mac in PDF format,
one for 10.4.x and
> the other for 10.5.x:
>
> 10.4.x:
>
http://www.webassist.com/media/professional/support/PDFs/InstallingPHP-OSX-10-4_PDF.pdf
>
> 10.5.x:
>
http://www.webassist.com/media/professional/support/PDFs/InstallingPHP-OSX-10-5_PDF.pdf
>
> All content is freely available. Go get'em!
>
> Best - Joe
>
> Joseph Lowery
> VP of Marketing, WebAssist -
http://www.webassist.com
> Author, Dreamweaver CS3 Bible -
http://www.idest.com/dreamweaver/
>

Installing JRE on JumpDrive? Possible?

What I am looking for is not a standard setup but it is very useful. I am wondering if it is possible at all.
I like jedit and use it as my editor. I also have to work on many different (Windows) computers. I started by installing JRE and Jedit on the different computers I use but it is becoming not practical when the number grow.
Is it possible to install JRE as a stand alone program and together with a Java program on a jumpdrive. Then I can just carry my jumpdrive to different computers and use the java program. This will provide a cleaner separation between the Java environment and the host OS environment..
Appreciate any comments.

Thanks for your qucik reply. If I can get JRE and Jedit working on my jumpdrive, it will be great and save me a lot of time. I am a new user so I might be asking some obvious questions here.
My question is : What is the difference between integrating JRE with IE and JRE with Jedit? If I run JRE as a stand alone program then will Jedit link to the JRE properly? Anyone care to comment on what the standard installation program does to provide the integration? I guess it is more than just copying files.
What happens if there is another JRE running already? maybe the same or different version of JRE as the one on my jump drive.
Thanks for your help.
Ken.

Detecting and Installing JRE

Hello
I'm a setup developer, and I'm tryng to detect from my setup program if the JRE is installed, all that by code, searching the registry whatever, then if it's not installed launch a Silent mode installation of JRE, But I don't know how to do it
How you can detect the installed JRE ?
How you can install JRE in silent mode?
Thanks

Can you detect JRE ?
The answer is yes. You have to read the registry and look for the uninstall string ( if you are using the 1.5.0 beta1 that got released today ) this is the registry value
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{3248F0A8-6813-11D6-A77B-00B0D0150000}
and the string is
MsiExec.exe /I{3248F0A8-6813-11D6-A77B-00B0D0150000}
look for these registry keys and you have detected the JRE
Is there a silent installation ?
Yes the command is
<jre>.exe /S /V" /qn"

Installing JMS 3.6 without JRE and JDK

I'm looking for a way to install JMS only, without installing the new versions of JRE and JDK. The application I'm working on works with JRE 1.5.0_02 only, and there is no plan to change that in the near future, however we want to upgrade to JMS 3.6 to be able to use the new imqPingInterval.

Are you shure you have included the jre PATH (not CLASSPATH) in your PATH variable?
Assuming you're working in a Linux (or unix) environmet, check the PATH: it should contain /usr/local/jdk1.3.1_01/jre/bin.
I'm not sure this is really the answer, but there's no damage on trying it! :-)
bye
Michele

URGENT - BPEL PM server and IE crash after re-installing jre - HELP

URGENT
After re-installing jre 1.5 update 3, still BPEL process manager and IE both crash when I click on the deployed process from the dashboard ..
Please help.
Thanks

bpel is NOT certiefied with java 1.5, and if you look at the start script for the server we take the java_home so setting that back to the old one should do it ..
thx clemens

Installing JDK and JRE, how?

I am new to Java. So new in fact that after 6 months I still have not managed to accomplish any of the basics concerning JAVA and I am in desperate need to get it to function. Perhaps you can help? On my XP I have downloaded the JDK and successfully set a path, but not a single program ran after it has gone through the compiler? Huh? I just don't get it! So, I have moved on a little bit and I am working off my Vista. I have learnt that the JRE and JDK are not the one and the same. I need BOTH if I want to start programming. I have the JRE 6 installed and working fine but I cannot even download the JDK! What is going on, does everybody encounter these problems or just me? Once, if ever, it is down loaded how do I set the path on Vista? Furthermore, would I need anything more other than the JRE and JDK? I really need help here. Why is JAVA being so problematic and why isn't there a nice and easy starting point? All I want to do is program.

Yep, 6 months is a heck of a long time, but it has not been continuous! I have a second degree in maths to complete. Free time is rare and I have had so much bad advice from people who thought they knew what they were doing. I hope here to make up lost time and get the right advice which I need!

How to get the Most RECENTLY installed JRE path and version ?

Hello Experts,
I am working on Installshield, and for some purpose, I need to get the MOST RECENTLY installed JRE version and Path. Now I have two choices :
1. Go into the directory " C:\Program Files\Java\" and get the most recently changed directory, ( that will be the installation directory of the most recently installed JRE ). And then search in the registry under : HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft/Java Runtime Environment/ and look for the version which is having
the value of the key INSTALLDIR as the above found Installation Directory.
But in this approach, I'll never find the Installation dir or version, if the JRE is installed somewhere else than the default location.
2. Now this is the reverse. I first search in the registry, and get the Installation Directories of all the versions installed in the system, and then look at the file attributes ( may be by using some batch file ) and see which one is most recently installed.
My question is, is there any other way, by which I can get the most recently installed JRE's installation Path and version? Or can we trace it during the installation itself ? I mean when we install the JRE, it creates some log files in %TEMP% directory. Is it possible to trace the version and installation directory of the most recently installed JRE from the log file ?
Thanks
Gagan

Rendering times are pretty much based on processor speed if I have that right. Not much you can do about that other than buy a new computer. Your day to day work in the finder and accessing of files would be faster with your boot drive internal. One thing you can do is ensure your FCP System Settings are on the fastest disk you have. If you put a pair of drives internal and made a RAID volume for them you would improve your write speed when capturing and for any other read/write operations. You would have to be sure you kept that backed up properly because you double the odds of a failure when two drives spread the data between them. There are many RAID options.
You could also bump up the RAM but you'd have to look at your processes to see if you are being limited by RAM. I'm guessing not but it's not impossible. If you are accessing scratch disks due to RAM limitations that would be one thing you could do.
I would never bother connecting an external via USB if there was an esata or firewire option. I use an esata card internally to give me access to estata storage. I also keep an external FW800 drive for a mirror backup of my boot drive. All my data and booting is internal with all my backups external. Each internal has an external and I have additional externals that I keep off site to protect against fire and theft.

Install only JRE and not WebStart with v1.4

I have an application running over the web that automatically installs the JRE for people if they haven't installed it yet. Right now, I'm using version 1.3.1, but I'd like to change that to version 1.4.1.
When I install the JRE with support for a browser, though, it automatically installs WebStart, which I didn't ask for. I don't need WebStart to be installing on people's computers, so I was wondering if there might be a way to install the just the JRE (and browser plugin). Anyone know if there's a way?

I also want to find a way of installing without Webstart.
REason is that this is for a citrix installation and Webstart makes the apps work differently.

Installing CF10, in Configuration and Settings Migration Wizard - getting error: Invalid Password

Installing CF10, in Configuration and Settings Migration Wizard, in browserhttp://127.0.0.1/CFIDE/administrator/enter.cfm,
ColdFusion has been successfully installed. This wizard will guide you through the remaining server configuration steps and, if applicable, migrate settings from a previous version of ColdFusion.
To guarantee the security of your server, please enter your ColdFusion Administrator password.
- getting error: Invalid Password. It won't take the password I provided in previous "Set Admin password" screen. Help?

Hi,
I am having the issue with the URL on the Configuration ans Setting Migration Wizard pointing to the following URL:
http://localhost/CFIDE/administrator/enter.cfm
Receiving a message:
HTTP Error 404.0 - Not Found
The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
The following is the information in the error page:
Module
IIS Web Core
Notification
MapRequestHandler
Handler
ISAPI-dll
Error Code
0x80070002
Requested URL
http://localhost:80/jakarta/isapi_redirect.dll
Physical Path
D:\ColdFusion10\cfusion\wwwroot\jakarta\isapi_redirect.dll
Logon Method
Anonymous
Logon User
Anonymous
I could not find a directory called jakarta.
Any ideas?
Thanks,
Mike

Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!

Hi,
Help, please.
Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!
Acording to these entries:
http://blogs.technet.com/b/sbs/archive/2011/08/19/two-commands-you-should-always-run-first-when-troubleshooting-companyweb.aspx
https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2Fwww.techtask.com%2Fsharepoint2010%2Ffehlermeldungen-nach-sharepoint-2010-service-pack-1-installation%2F
In order to fix this, I need to run:
PSConfig.exe -cmd upgrade b2b -force -inplace -cmd application content -install -cmd install features
But SP doesn’t recognize “b2b”. is the the content or config db?
Thanks in advanced

Your Syntax is bad. b2b should follow -inplace, it doesn't make sense anywhere else in the command. Have a look here for more detail:
https://technet.microsoft.com/en-us/library/cc263093%28v=office.14%29.aspx?f=255&MSPPError=-2147217396

Install jre and mysql by wizard

Similar Messages

Maybe you are looking for