Install LVRTE 2010 when already installed LVRTE 2012

Hey,
i lost track of installs on my PC.
I think a LV application quits because of not installed LVRTE 2010.
I have installed LV 2012, 2013 & 2014
I had also installed LVRTE 2012 (and obviously 6.1 (don't know where this comes from, but i see it in NI installed programs in installed features and programs))
Now, I want to install LVRTE 2010, but it refuses with the popup: higher versions installed
should I just remove LVRTE 2012? and reïnstall afterwards?
regards,
koen.
Solved!
Go to Solution.

wrong post! LVRTE 2010 installed, 2012 not installed. LVRTE 2012 install refuses install because of higher versions
sorry

Similar Messages

Have been unsuccessful uninstalling mywebsearch. Mozilla Firefox shortcut key takes me to mywebsearch. mywebsearch was apparently installed on 5/23/2010 when i thought i was accessing a cool screensaver website. I WANT MY FIREFOX BACK!

I have been unsuccessful uninstalling mywebsearch. Mozilla Firefox shortcut key
takes me to mywebsearch. mywebsearch was apparently installed on 5/23/2010
when i thought i was accessing a cool screensaver website. I WANT MY FIREFOX
BACK! Today's response from Bugzilla is "Mywebsearch is malware, and is most easily removed by running malwarebytes
anti-malware. Not a firefox issue though. support.mozilla.com can possibly
help."
PLEASE HELP

Hello Anon and Goran,
This is Jason with Mindspark Interactive Network Customer
Support.
We would like to assure you that contrary to what you may have read or heard, My Web Search® and its related suite of products is not and has never been malware, spyware, or adware. In fact, the My Web Search toolbar has been tested by top security software companies and has repeatedly been shown to be free of any threats.
The toolbar can be removed using the standard Add/Remove functionality of your Windows operating system.
For step by step instructions, please visit:
http://www.mindspark.com/main/toolbar-info/remove-mws/removemwsinst/index.shtml
Important: It is not advisable to manually delete any files or registry entries, or to use 3rd party software which may leave artifacts behind.
Please note that you will continue to see the My Web Search toolbar until you close and reopen all instances of your Web browser. A reboot will be required to complete the removal process.
To reset your homepage back to your desired choice, use the following instructions that correspond to your browser of choice:
FOR INTERNET EXPLORER 7 AND ABOVE:
1. Navigate to the webpage you would like to set as the home page.
2. Click the arrow to the right of the "Home button" and then click "Add or Change Home Page".
3. In the "Add or Change Home Page" dialog box, do one of the following:
• To make the current webpage your only home page, click "Use this Webpage" as your only home page.
• To start a home page tab set or to add the current webpage to your set of home page tabs, click "Add this Webpage" to your home page tabs.
• To replace your existing home page or home page tab set with the webpages you currently have open, click Use the current tab set as your home page. This option will only be available if you have more than one tab open in Internet Explorer.
4. Click Yes to save your changes.
FOR MOZILLA FIREFOX USERS:
1. Navigate to the page you want set as your home page.
2. At the top of the Firefox window on the menu bar, click on "Tools" and select "Options".
3. If it isn't already selected, click the "Main" icon. The "Main" options panel is displayed.
4. Click on "Use Current Page".
• If you have a group of tabs open, the entire group of tabs will be set as your home page.
• You can also use the "Use Bookmark" button to set one of your bookmarks as your home page.
5. Click OK to close the "Options" window.
We hope this helps, and that in the future, you will take a second look at the My Web Search toolbar.
For further information on the My Web Search toolbar, or Mindspark, please see http://www.mindspark.com/main/toolbar-info/index.shtml

Exe compiled in LV 2010 crash - Since installing LV 2012 SP1 and 2013

Exe compiled in LV 2010 crash - Since installing LV 2012 SP1 and 2013
Double-click on exe icons (LV apps written in 2010), the application icon appears on taskbar then disappears (program crashes).
I have tried re-installing the exe's but doesn't fix. Is there an issue with the new LV RTE's?
Any suggestions for fix???

battler,
Have you tried making your exe into a debuggable exe? You can do this through your project build specification Advanced>>Enable Debugging. Make sure you check the box for Wait for Debugger. This means when you launch your exe you can connect to it from LabVIEW and see your block diagrams, use highlight execution, probles etc. It is quite possible that you are running into an error case while your program is loading and it is exiting.
Regards,
Jeff Peacock
Product Support Engineer | LabVIEW R&D | National Instruments

Issue with SQL Agent when install SCOM 2012 R2

Hi all,
i'm try to install SCOM 2012 R2 with all components (Mgmt Server, Operation Console, Web Console, Reporting Server)
Everything is fine, except Reporting Server. I have attached the picture below
I have also check the SQL Server Agent in SQL Server Configuration Manager. It has already started. But... i dont know why?
Is there anyone know what wrong it is??

Many thanks Gautam,
i have checked again in Repoting Services Configuration Manager & change the database to the local SCOM
Cause i'm using database for management server, dataware house on SCCM. So reporting service automatic set the database on SCCM also.... :(
So now i will show everyone who try to install SCOM
For the Management & DatawareHouse database --> you could install on any SQL Server (open port 1433)
For the Reporting Services:
On the local SCOM, install SQL Server with these components (SQL Engine: SQL Agent; SQL Reporting)
After install SQL successfully, login to the Reporting Services Configuration Manager to set:
First, create the new database on local SCOM
Second, Web Service URL. login to the IIS to create self-signed certification for own SCOM. then turn back too Web Service URL to create SSL Certification
Set SQL Agent service to Automatic, then start
so, that's all. I'm crazy with this issue for a whole day :)

Why I cannot open the application that I already installed on my mac. It's appears for a moment on the dock,but suddenly disappear again. I installed PES 2012, and my mac is pro with OS 10.6.8. Anyone could solve this problem please?

I installed PES 2012 on my mac. It succeed, but when I click it in order to open it, the apps appear just for a moment on the dock then suddenly disappear. I'm using Mac Pro OS 10.6.8.

Usually that means it's not compatible, likely a 10.5 program and Rosetta can't run it or it's not there, you need to check with Konami, they have a community forum/support there to answer your questions
Check the operating system and machine requirements with them, perhaps there is a update or a patch you need to install to get it to work.
https://www.konami.com/games/pes2012
If that isn't a help, all checks out, then come back here as it's likely a OS X issue after that.

LV 2013 Runtime Install wants 2012 disk ?

I am using a blank project to create an installer to install just the LV 2013 runtime along with a few additional drivers, all listed on the device drivers disk. See list:
NI IVI Compliance Package 4.6.0
NI LabView Runtime Engine 2013 F2 (minus Realtime support and non-english language support)
NI MAX 5.5
NI System Configuration Runtime 5.5.0
NI-DAQmx Core Runtime 9.7.5
NIDAQmx MAX Configuration Support 9.7.5
When I highlight each one in the Additional Installers section of the Installer Properties dialog box , it shows location as either being on my system already or on one of the 2013 disks.
When I goto build however, it is asking for one of the LV 2012 disks. I never even installed version 2012 on my machine, just 2011 and 2013. Here is the dialog box I get and again when I uncheck the Dev Suite 2012 DS1 DVD 1  disk selection.
If I check the February 2012 Device Drivers selection, the error message goes away but since I am just creating an install for 2013 and support for that version only, why would it ask me for a 2012 disk at all ?   shouldn't all the files be on the 2013 disks ?
Checking the 2012 DVD 3 selection does not make the error message go away.
I tried unselecting the additional drivers one by one. Unchecking the NIDAQmx MAX Configuration Support 9.7.5 option got rid of the error and the requirement for a 2012 disk.   Is this inherently included in one of the other selections ?
Description is that it is used for configuring NI hardware in MAX. Kinda think I would need that. My system has this version installed and it came from the 2013 disks. It is listed in the software section of MAX as a separate component.
Any thoughts?
Thanks
Doug
"My only wish is that I am capable of learning each and every day until my last breath."

Hi Doug,
I believe I could have an explanation to why the Installer is asking for LabVIEW 2012 DS1 DVD 1.
The Developer Suite editions of LabVIEW are named based on when they are released. For example, LabVIEW 2012 DS1 is released in early 2012, but is actually LabVIEW 2011 SP1, since LabVIEW 2012 is not released until later in 2012, which is named LabVIEW 2012 DS2.
The same naming convention applies to the LabVIEW 2013 Developer Suites.
Below I have attached links that describe the components of each Developer Suite listed in your screenshots.
NI Developer Suite 2012 DS1:
http://www.ni.com/pdf/manuals/373293c.pdf
NI Developer Suite 2013 DS2:
http://www.ni.com/white-paper/14629/en/
Hope this helps!
Robert R. | Applications Engineer | National Instruments

Installing SSMS 2012 after SQL Server 2008 R2 Express was installed (without tools)

Hi everybody,
This is a question in another forum I am frequent. Someone installed SQL Server Express 2008 R2 and he used the wrong exe, so he installed it without tools. Now he wants to install SSMS.
It looks like SSMS 2012 wants to have SQL Server 2012 Express installed first.
Can someone please confirm if it's possible to install just SSMS 2012 after SQL Server 2008 R2 Express was already installed and if possible, guide through the installation steps?
Thanks a lot in advance.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Hi Naomi,
Agree with Shanky.
I have tested the scenario you described. Everything works well, I successfully install SQL Server Management studio 2012 after SQL Server 2008 R2 Express (without tools) was already installed.
Please note that we don’t need to install SQL Server 2012 Express first when installing SSMS 2012. For detailed installation steps of SQL Server 2008 R2 Express and SSMS 2012, you can review below blogs.
How to Install SQL Server 2008 R2 (Express Edition)
SQL Server Management Studio – A step-by-step installation guide
In addition, we can use SSMS 2012 to manage SQL Server Express 2005 /2008 /2008 R2, the tool is backward compatible.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

SMS Provider Locations Do Not Match - Problem installing SCCM 2012 R2 CU4

I have an SCCM 2012R2 CU1 site that has been upgraded from SCCM 2012 non-SP1, so I have gone from 2012 to 2012SP1 through CU5 and then to R2 and then to CU1.
Over the course of the life of this site, which has more than 10k clients and 10 Site Systems, we have installed roles, removed roles, moved roles and removed Site Systems.
I have also installed and removed SMS providers . . . which is where my issues begin.
The site properties in the console list 6 SMS Providers and even lists an SMS provider on a server that was retired and is no longer a Site System. When I query WMI using the following VBS script it only returns the *ACTUAL* SMS Provider locations,
2 of the 6 listed in the GUI.
On Error Resume Next
Const ForReading = 1, ForWriting = 2, ForAppending = 8
strComputer = "."
Set oFS = CreateObject("Scripting.FileSystemObject")
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\sms")
If Err.Number <> 0 Then
WScript.Echo "Cannot connect to WMI"
WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
End If
Set oLog = oFS.OpenTextFile("C:\Temp\SMS_ProvList.log",ForAppending, True)
If Err.Number <> 0 Then
WScript.Echo "Could not create output file"
WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
End If
Set colItems = objWMIService.ExecQuery("SELECT * FROM SMS_ProviderLocation",,48)
count = 0
For Each objItem in colItems
count = count + 1
oLog.WriteLine "-----------------------------------"
oLog.WriteLine Now()
oLog.WriteLine "Provider instance " & count & " : " & objItem.Machine
oLog.WriteLine "NamespacePath : " & objItem.NamespacePath
oLog.WriteLine ""
Next
I have a test environment which has also gone through some growth over its lifetime and has had the same changes to SMS Providers made. When I first attempted to install SCCM 2012 R2 CU4 in this test environment the installer continually failed the
prerequisite checker when querying the CU level of the SMS Providers. The only way that I could get past that issue was by running a site maintenance task via the CM installer and installing an SMS Provider at the location that had previously been an
SMS Provider but I had uninstalled that role.
I do not want to have to do that in my production environment, and would not even be able to do so if I wanted as I have retired one of the servers listed and cannot re-provision that machine.
Any CM12 gurus out there with suggestions? This strikes me as a standard MS problem when having multiple development teams working on a product/update and not having a standard location to check for configuration information (This is exactly the problem
when configuring DNS suffixes via GPO and not manually setting the GUI to match).
Thanks!
Josh Gerner
Cornell University.

The issue I have is that I cannot find the WMI class that holds the SMS Providers that are returned by the GUI.
I actually engaged MS Premier for a SCCM 2012 RAAS about 2 years ago and that was when the discrepancy first reared it's head. The support person that I worked with couldn't give me a way of cleaning those entries at that point which is when I started
logging the locations to be sure that my maintenance task was really installing or removing the SMS Providers.
Josh Gerner

Not able to install server 2012 R2 on a VMware Workstation 10 .

Dear Team,
Thanks in advance.
I am facing an issue when installing server 2012 R2 on a VMware Workstation 10 .
This is the error message i get ''windows cannot find the microsoft software license terms. make sure the installation sources are valid and restart the installation.''
i have tried changing the initial install option of OS to ''other''. But still its the same.
Finally i have installed it without adding the OS disk in the initial setup. But the problem here is that its asking me activation key.
if you have the activation key for 180 days please let me know.

I have the same problem here.
With VMWare Workstation 10, downloading and using the Windows 2012 R2 ISO evaluation to test.
Shortly after booting up with the ISO, it complains about this message: ''windows cannot find the microsoft software
license terms. make sure the installation sources are valid and restart the installation.''
BUT, if you uninstall VMWare Workstation 10 and install VMWare Workstation 9, no problem.
Something wrong with either VMWare Workstation 10 or Windows 2012 R2.

Cluster Event Warning after Installing SCDPM 2012 R2

Hi
I just installed SCDPM 2012 R2 on Server 2012 R2 Box (that is also a cluster node), after installing the SCDPM 2012 R2 on Hyper-V Cluster Node i am getting below Warning in Cluster Events. I just want to know what are the impact of this event ..??
Is it also impacts on SCDPM Backup??? is any solution to resolve this warning.
Error
Shailendra Dev

Hi Shailendra Dev,
This event can caused by third Party filter driver has been identified, you can refer the following article to find out the incompatible driver then uninstall the software.
More related information:
Troubleshooting ‘Redirected Access’ on a Cluster Shared Volume (CSV)
http://blogs.technet.com/b/askcore/archive/2010/12/16/troubleshooting-redirected-access-on-a-cluster-shared-volume-csv.aspx
Allocated Altitudes
http://msdn.microsoft.com/en-us/library/windows/hardware/dn265170(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot Install SCVMM 2012 - Hardware Management Error (WinRM)

Hello All,
I am trying to install SCVMM 2012 on Server 2008 R2, However, when installing, I met the following error:
I tried using the command "winrm qc" but "Access is Denied" error is shown.
My account is a domain user which has been given local administrator privilege.
Any help is appreciated

Brian,
Why we can't run the SCVMM installation using Local administrator account ?
From the Tech net : http://technet.microsoft.com/en-us/library/gg610656.aspx
To start the Virtual Machine Manager Setup Wizard, on your installation media, right-click
setup.exe, and then click Run as administrator.
For the WinRM errors , isn't this something to do with UAC , Can you use an elevated command prompt and run "winrm qc" if you still get the access denied error , please check that administrator account has a non blank password
WinRM needs to be fixed prior to go for VMM installation

Installing Windows 2012 via USB

Thank you. It's working. Now I hope I can turn that trial version into an activated version once I have the media cd.

Hello Everyone,
Recently have a client who'd ask me to install Windows 2012 Server Essentials on to their new server but the server has no CD/DVD Drive.
Is there a way to download the ISO (already have), move that over to a USB Stick and then boot the server off the USB stick and install Windows 2012 Server Essentials via the USB Stick?
Cheers
This topic first appeared in the Spiceworks Community

Installing GroupWise 2012 for the first time

Hello,
I am looking for some help on installing GroupWise 2012 for the first time, and onto a brand new Windows 2008 Server. I have looked at some of the documentation for this, but I do not fully understand what I need to do. For example, I need to have eDirectory installed so I installed eDirectory on the Windows sever. I don't know what settings I need to use for eDirectory or if I even need a Netware server, too. I would appreciate it if someone could walk me through this step by step and provide me with values for a basic system I would appreciate it. My first goal is to learn how to install GroupWise 2012 on a Windows 2008 server. Once I understand this, then I can redo it and go from there.
Thank you for your help.
John

Hi John,
Let me see if I can be of some sort of assistance.... you don't need a NetWare server - besides they are obsolete.
I created the following set of instructions for somebody doing a first time install on Linux - perhaps just read around it and see if it works for you in a windows environment:
"on the server run the GroupWise install: ./install from the directory where you have the software
select "Create or Update a GroupWise System"
accept the license agreement
create the software distribution directory (default should be fine)
From the Select Software dialog select the Select All button
when the copying is complet select Creating a new GroupWise System
to start ConsoleOne select Run
when prompted with the Linux Mount Directory select OK
when prompted, take note of the steps yout ake to create a new system, then select OK
login to consoleone with your admin credentials
in the left pane select GroupWise System the select Tools | GroupWise Utilities | New System
select next
confirm that your tree is correct
select Extend eDirectory Schema check box and then select next
When prompted for a system name enter something simple like GWise
When prompted for a primary domain name enter a domain like gwdom1 (I'm keeping it generic in this scenario)
when prompted for a domain directory enter a path ie /opt/novell/groupwise/dbs/gwdom1
select next
Next to the domain context fields select the browse icon
browse to and select the container that will hold the domain (you might want to create an organisational unit called groupwise in your tree for this purpose)
next slect your language and time zone
when prompted for a post office name enter a poa name like gwpoa1 (again, generic in this example)
when prompted for a post office directory enter a path eg /opt/novell/groupwise/dbs/gwpoa1
the context for the post office is assumed to be the same as the domain
select the language and time zone for the post office
in the post office link dialog confirm that tcp/ip is selected
enter your ip address of your server
leave the ports at default - don't mess with these unless you know what you are doing!
in the IP address of the MTA (that would be your domain) enter the IP of your server
leave the ports at default
browse and add existing edirectory users to your GroupWise system
to create the GroupWise system select next
view the installation summary then select next
the final step is to install the agent software - select next
from the GroupWise agents configuration dialog select next
confirm that the check box for Launch GroupWise AGents on system startup is selected then select exit
exit the GroupWise installation program
from the terminal winodws enter rcgrpwise start to load the groupwise agents"
Good luck
Cheers,

Installing VS 2012

So I try to install VS 2012 and it just stops about 2 minutes in saying " Data error (cyclic redundancy check)." This is covered nowhere in the support forums. What do I do?

Hi AK92,
Perhaps you need to check your disk. You can use chkdsk /f to have a fix.
Open a command prompt.
For Windows Vista and for Windows 7, click Start, type
cmd in the Start Search box, and then press ENTER.
Note If you are prompted for an administrator password or for confirmation, type the password, or click
Allow.
For Windows XP, click Start, click Run, type
cmd, and then click OK.
At the command prompt, type chkdsk /f, and then press ENTER.
Note If you receive a message similar to the following
The type of the file system is NTFS. Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
press Y, press ENTER, and then restart your computer.
When Chkdsk finishes, close the command prompt.
Re-install VS.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Install LVRTE 2010 when already installed LVRTE 2012

Similar Messages

Maybe you are looking for