Install OS from cdrom failed on guest domain
I am trying to install Soloris OS on guest domain of SUN T2000 server, but it failed for "WARNING: /virtual-devices@100/channel-devices@200/disk@0: Timeout connecting to virtual disk server... retrying"
it seems abnormal that the SOFTSTATE of primary and the guest domain is always in "Openboot initializing" and the SOFTSTATE in the Logic domain adminstration document is "Solaris running". Is it the failing reson?
Here is the output of "ldm list -l"
bjt2000sa3:/root-# ldm list-domain -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -t-cv SP 16 15G 0.1% 19m
SOFTSTATE
{color:#ff0000}Openboot initializing{color}
VCPU
VID PID UTIL STRAND
0 0 0.5% 100%
1 1 0.0% 100%
2 2 0.0% 100%
3 3 0.0% 100%
4 4 0.0% 100%
5 5 0.0% 100%
6 6 0.0% 100%
7 7 0.1% 100%
8 8 0.1% 100%
9 9 0.0% 100%
10 10 0.1% 100%
11 11 0.1% 100%
12 12 0.1% 100%
13 13 0.0% 100%
14 14 0.0% 100%
15 15 0.1% 100%
MAU
CPUSET
(0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 15G
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=disk0:a
diag-switch?=true
IO
DEVICE PSEUDONYM OPTIONS
[pci@780|mailto:pci@780] bus_a
[pci@7c0|mailto:pci@7c0] bus_b
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 cdrom1 /dev/rdsk/c0t0d0s2
volldg1 /export/install_ldg1
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:f9:60:ac e1000g0 [switch@0|mailto:switch@0] prog,promisc
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldg1 active -t--- 5000 16 15G 6.3% 4m
SOFTSTATE
{color:#ff0000}Openboot initializing{color}
VCPU
VID PID UTIL STRAND
0 16 100% 100%
1 17 0.0% 100%
2 18 0.0% 100%
3 19 0.0% 100%
4 20 0.0% 100%
5 21 0.0% 100%
6 22 0.0% 100%
7 23 0.0% 100%
8 24 0.0% 100%
9 25 0.0% 100%
10 26 0.0% 100%
11 27 0.0% 100%
12 28 0.0% 100%
13 29 0.0% 100%
14 30 0.0% 100%
15 31 0.0% 100%
MAU
CPUSET
(16, 17, 18, 19)
MEMORY
RA PA SIZE
0x8000000 0x3c8000000 15G
VARIABLES
auto-boot?=true
boot-device=vdisk
NETWORK
NAME SERVICE DEVICE MAC
vnet1 [primary-vsw0@primary|mailto:primary-vsw0@primary] [network@0|mailto:network@0] 00:14:4f:fb:c7:63
DISK
NAME VOLUME TOUT DEVICE SERVER
cdrom1 [cdrom1@primary-vds0|mailto:cdrom1@primary-vds0] 5 [disk@0|mailto:disk@0] primary
vdisk1 [volldg1@primary-vds0|mailto:volldg1@primary-vds0] [disk@1|mailto:disk@1] primary
VCONS
NAME SERVICE PORT
ldg1 [primary-vcc0@primary|mailto:primary-vcc0@primary] 5000
Thanks all in advance!
Sreesobh,
Thanks for your information!
I config it as "/dev/dsk/c0t0d0s2" and tried again. But it still doesn't work.
bjt2000sa3:/root-# ldm list -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -t-cv SP 16 15G 1.0% 26m
SOFTSTATE
Openboot initializing
VCPU
VID PID UTIL STRAND
0 0 2.6% 100%
1 1 0.9% 100%
2 2 0.7% 100%
3 3 0.6% 100%
4 4 0.9% 100%
5 5 0.9% 100%
6 6 0.9% 100%
7 7 0.8% 100%
8 8 1.3% 100%
9 9 0.7% 100%
10 10 0.5% 100%
11 11 0.8% 100%
12 12 1.1% 100%
13 13 0.7% 100%
14 14 0.8% 100%
15 15 1.0% 100%
MAU
CPUSET
(0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 15G
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=disk0:a
diag-switch?=true
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 cdrom /dev/dsk/c0t0d0s2
volldg1 /export/install_ldg1
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:f9:60:ac e1000g0 switch@0 prog,promisc
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldg1 active -t--- 5000 16 15G 6.3% 3m
SOFTSTATE
Openboot initializing
VCPU
VID PID UTIL STRAND
0 16 100% 100%
1 17 0.0% 100%
2 18 0.0% 100%
3 19 0.0% 100%
4 20 0.0% 100%
5 21 0.0% 100%
6 22 0.0% 100%
7 23 0.0% 100%
8 24 0.0% 100%
9 25 0.0% 100%
10 26 0.0% 100%
11 27 0.0% 100%
12 28 0.0% 100%
13 29 0.0% 100%
14 30 0.0% 100%
15 31 0.0% 100%
MAU
CPUSET
(16, 17, 18, 19)
MEMORY
RA PA SIZE
0x8000000 0x3c8000000 15G
VARIABLES
auto-boot?=true
boot-device=vdisk
NETWORK
NAME SERVICE DEVICE MAC
vnet1 primary-vsw0@primary network@0 00:14:4f:fb:c7:63
DISK
NAME VOLUME TOUT DEVICE SERVER
cdrom cdrom@primary-vds0 5 disk@0 primary
vdisk1 volldg1@primary-vds0 disk@1 primary
VCONS
NAME SERVICE PORT
ldg1 primary-vcc0@primary 5000
bjt2000sa3:/root-#
bjt2000sa3:/root-# telnet localhost 5000
Trying ::1...
telnet: connect to address ::1: Network is unreachable
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "ldg1" in group "ldg1" ....
Press ~? for control options ..
Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 15360 MB memory available, Serial #66693703.
Ethernet address 0:14:4f:f9:aa:47, Host ID: 83f9aa47.
Boot device: vdisk File and args:
WARNING: /virtual-devices@100/channel-devices@200/disk@0: Timeout connecting to virtual disk server... retrying
WARNING: /virtual-devices@100/channel-devices@200/disk@0: Timeout connecting to virtual disk server... retrying
{0} ok devalias
vdisk1 /virtual-devices@100/channel-devices@200/disk@1
cdrom /virtual-devices@100/channel-devices@200/disk@0
vnet1 /virtual-devices@100/channel-devices@200/network@0
virtual-console /virtual-devices/console@1
net /pci@780/network@1,1
disk /pci@7c0/scsi@1/disk@0
scsi /pci@7c0/scsi@1
ttyb /virtual-devices/console@4
nvram /virtual-devices/nvram@3
ttya /virtual-devices/console@1
vdisk /virtual-devices/disk@0
name aliases
Your time is appreciated
Similar Messages
-
Mounting Cdrom Drive In Guest Domain running 1.0.3
Folks,
I have followed the Admin guide on how to export Cdrom/Dvd drive from Service Domain to Guest Domain, however once allocated to the guest domain we are unable to mount the device. Any help is appreciated.
Here are my bindings
ldm list-bindings primary
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 2G 0.8% ; 7d 18h 56m
MAC
00:14:4f:02:ca:6a
VCPU
VID PID UTIL STRAND
0 0 1.0% ; 100%
1 1 0.5% ; 100%
2 2 0.7% ; 100%
3 3 0.8% ; 100%
MAU
CPUSET
(0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
boot-device=/pci@780/pci@0/pci@9/scsi@0/disk@1,0:a /pci@780/pci@0/pci@9/scsi@0/disk@0,0:a
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5031
CLIENT PORT
ldom3@ldom3 5002
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 cdrom /dev/dsk/c1t0d0s2
vol1 /ldom1/bootfile1
vol11 /dev/rdsk/c6t60060480000287750594534653353445d0s2
vol2 /ldom2/bootfile2
vol3 /bootpool/bootfile3
CLIENT VOLUME
vdisk0@ldom3 vol3
vdisk11@ldom3 vol11
cdrom@ldom3 cdrom
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:fa:c6:14 e1000g0 switch@0 prog,promisc
PEER MAC
vnet1@ldom3 00:14:4f:f9:c8:15
VCONS
NAME SERVICE PORT
SP
ldm list-bindings ldom3
root@host# ldm list-bindings ldom3
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldom3 active -n--- 5002 4 1900M 0.1% ; 15m
MAC
00:14:4f:f8:6c:1d
VCPU
VID PID UTIL STRAND
0 4 0.3% ; 100%
1 5 0.0% ; 100%
2 6 0.0% ; 100%
3 7 0.0% ; 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 1900M
VARIABLES
keyboard-layout=UK-English
NETWORK
NAME SERVICE DEVICE MAC
vnet1 primary-vsw0@primary network@0 00:14:4f:f9:c8:15
PEER MAC
primary-vsw0@primary 00:14:4f:fa:c6:14
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk0 vol3@primary-vds0 disk@0 primary
vdisk11 vol11@primary-vds0 disk@1 primary
cdrom cdrom@primary-vds0 disk@2 primary
VCONS
NAME SERVICE PORT
ldom3 primary-vcc0@primary 5002
We can see the exported cdrom volume in /dev/dsk as a new device and also at the ok prompt after running devalias.
However, we need to mount this device so that we can install software in our domain. All our attempts at mounting just hang and I end up having to stop/start the whole domain. ?
Is there an easy way to mount cdroms/dvd drives in a guest domain ?
TIAThere is an recently filed bug where DVDs (and ISO images) which do not have a VTOC in their disk label
fail to be mountable in the guest domain (e.g. application software DVDs as opposed to OS installation images).
6708257 DVD-ROM (not OS installation disk) can not mount from guest domain of LDOM 1.0.2
# mount -F hsfs /dev/dsk/c0d1s0 /mnt
mount: I/O error
mount: cannot mount /dev/dsk/c0d1s0
It's strange that you are getting a hang though (the reported error is an I/O error).
Are there any messages in /var/adm/message of the control domain?
What OS/patches are running on the guest and control domains (i.e is 127127-11 installed on both) ?
I've just had a thought though, exporting the DVD device as a slice instead may work
(it works for me on an ISO image but my machine is 1000s of miles away so I can't stick DVD in it
to try out)
e.g. ldm add-vdsdev options=slice /dev/dsk/c1t0d0s2 cdrom@primary-vds0 -
Error "NOTICE: [0] disk access failed" during guest domain network booting
Hi,
Could you please tell me what is the problem with my configuration?
I created guest domain on my T1000 server.
As a disk I used disk from disk array: /dev/dsk/c0t18d0
I added disk using commands:
# ldm add-vdsdev /dev/dsk/c0t18d0 vol1@primary-vds0
# ldm add-vdisk vdisk1 vol1@primary-vds0 myldom1
# ldm set-variable auto-boot\?=false myldom1
# ldm set-variable boot-device=/virtual-devices@100/channel-devices@200/disk@0 myldom1
Then I logged to guest domain and booted from network to install OS from JumpStart server:
{0} ok boot net - install
Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: - install
Requesting Internet Address for 0:14:4f:f9:78:19
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring devices.
NOTICE: [0] disk access failed.
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
ERROR: No disks found
- Check to make sure disks are cabled and powered up
Solaris installation program exited.
Configuration:
[root@gt1000a /]# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 2G 0.5% 2h 23m
MAC
00:14:4f:9f:71:4e
HOSTID
0x849f714e
VCPU
VID PID UTIL STRAND
0 0 5.3% 100%
1 1 0.5% 100%
2 2 0.5% 100%
3 3 0.4% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
keyboard-layout=US-English
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
myldom1@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw0 00:14:4f:fa:ca:94 bge0 switch@0 1 1
PEER MAC PVID VID
vnet0@myldom1 00:14:4f:f9:78:19 1
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 vol1 /dev/dsk/c0t18d0
CLIENT VOLUME
vdisk1@myldom1 vol1
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
myldom1 active -n---- 5000 12 2G 0.1% 2h 18m
MAC
00:14:4f:f9:e7:ae
HOSTID
0x84f9e7ae
VCPU
VID PID UTIL STRAND
0 4 0.5% 100%
1 5 0.0% 100%
2 6 0.0% 100%
3 7 0.0% 100%
4 8 0.0% 100%
5 9 0.0% 100%
6 10 0.0% 100%
7 11 0.0% 100%
8 12 0.0% 100%
9 13 0.0% 100%
10 14 0.0% 100%
11 15 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 2G
VARIABLES
auto-boot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:f9:78:19 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:fa:ca:94 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
vdisk1 vol1@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
myldom1 primary-vcc0@primary 5000
[root@gt1000a /]#
Kind regards,
DanielIssue solved.
There was a wrong disk name:
primary-vds0 vol1 /dev/dsk/c0t18d0
I changed to c0t18d0s2 and now I sucessfuly installed OS from Jumpstart. -
Weird message when installing Solaris from CDROM
Has anybody see something as follow:
{0} ok boot cdrom
Boot device: /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f File and args:
SunOS Release 5.10 Version Generic_118833-33 64-bit Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: mac_open e1000g0 failed
WARNING: mac_open e1000g0 failed
WARNING: mac_open e1000g0 failed
WARNING: Unable to setup switching mode
Configuring devices.
WARNING: bypass cookie failure 71ece
NOTICE: tavor0: error during attach: hw_init_eqinitall_fail
NOTICE: tavor0: driver attached (for maintenance mode only)
NOTICE: pciex8086,105e - e1000g[0] : Adapter 1000Mbps full duplex copper link is up.What's wrong with the e1000g0 network interface?I've had similiar messages on the Solaris Developer Edition with my machine that uses the rtls driver, and I simply ignored it, as it did still connect to the internet. I can't check it right now, as I'm currently running S10 U3 on that machine. If I remember correctly, I did do a sys-unconfig to try to get rid of some of the messages.
-
See above
Please let us know the exact error code or message that you are receiving while installation, it shall help us to assist you.
Regards
Rajshree -
Cdrom install in new guest domain
Hi all --
I'm waiting for my T1000 to show up (should be here tomorrow) and I'm whiling away my time with reading the Admin Guide.
Our Solaris machines (and these ldom's) are on a network that already has a Red Hat Kickstart server. I don't really feel like messing with that, and our volume of installing Solaris is so small that I don't want to spend the time to make a Jumpstart server.
It seems that it's possible to boot and start a cd-rom based install of Solaris 10 from within a guest domain, but the docs don't mention how to do it.
Can someone shed some light for me?
Thanks!Well, the T1000 is here, and lo and behold, no cdrom drive.
So, the question now becomes - it it possible to have it boot off of an .iso, or is netboot my only option? -
Guest domains fail to boot from SAN disk after power-cycle
Control Domain Environment
# uname -a
SunOS s0007 5.10 Generic_139555-08 sun4v sparc SUNW,T5440
# ./ldm -V
Logical Domain Manager (v 1.1)
Hypervisor control protocol v 1.3
Using Hypervisor MD v 0.1
System PROM:
Hypervisor v. 1.7.0 @(#)Hypervisor 1.7.0 2008/12/11 13:42\015
OpenBoot v. 4.30.0 @(#)OBP 4.30.0 2008/12/11 12:16
After a power-cycle the guest domains did not boot from SAN disks, they
tried to boot from the network.
# ./ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 16 8G 0.5% 4d 20h 46m
s0500 active -t---- 5000 8 8G 12% 4d 20h 46m
s0501 active -t---- 5001 8 4G 12% 4d 20h 46m
s0502 active -t---- 5002 16 8G 6.2% 4d 20h 46m
s0503 active -t---- 5003 8 2G 12% 4d 20h 46m
s0504 active -t---- 5004 8 4G 0.0% 4d 20h 46m
s0505 active -t---- 5005 4 2G 25% 4d 20h 46m
s0506 active -t---- 5006 4 2G 25% 4d 20h 46m
s0507 active -t---- 5007 4 2G 25% 4d 20h 46m
s0508 active -t---- 5008 4 2G 25% 4d 20h 46m
Connecting to console "s0508" in group "s0508" ....
Press ~? for control options ..
Requesting Internet Address for 0:14:4f:fa:b9:1b
Requesting Internet Address for 0:14:4f:fa:b9:1b
Requesting Internet Address for 0:14:4f:fa:b9:1b
Requesting Internet Address for 0:14:4f:fa:b9:1b
If we reboot the quest domains now, it works.
It seems the disks are not ready at the
time the guest domains boot.
We see this on systems with many guest domains.
Is there any logfile, where we could find the reason for this?
Or is this a known issue?Press F12 on boot to choose CD/DVD as a temporary boot device.
My hunch is that there's something wrong with the SSD itself, though.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Can I install Sun Cluster on LDOM guest domain. Is Oracle RAC a supported c
Hello,
Can I install Sun Cluster on LDOM guest domains. Is Oracle RAC on LDOM guest domains of 2 physical servers a supported configuration from oracle?
Many thanks in advance
Ushas SymonHello,
The motive behind using LDOm Guest domains as RAC node is to have a better control of the resource allocation, since i will be having more than one guest domains which should perform different functions. The customer wants to have ORACLE RAC alone (without sun cluster).
I will have two T5120's and one 2540 shared storage.
My plan of configuration is to have
Control&IO Domain with 8VCPU, 6GB mem
one LDOM guest domain on each physical machine with 8 VCPU's, 8GB of memory, shared n/w and disks participating as RAC node's. (Don't know yet if i will use solaris cluster or not)
one guest domain on each physical machine with 12 VCPU's, 14GB of memory, shared n/w and disks participating as BEA weblogic cluster nodes (not on solaris cluster)
One guest domain on each physical machine with 4 VCPU's, 4GB of memory,shared n/w and disks participating as apache web cluster (on solaris cluster)
Now, My question is, is it a supported configuration to have guest domains as Oracle RAC participants for 11gR2 (either with or without solaris cluster).
If I need to configure RAC nodes on solaris cluster, is it possible to have two independent clusters on LDOM , one 2 node cluster for RAC and another 2 node cluster for apache web?
Kindly advise
Many thanks in advance
Ushas Symon -
LDOMs on T2000 and T2540 , guest domains from FC LUN's
Hi,
I have some T2000 servers and ont 2540 FC storage. each servers have one HBA only, and 73 GB of mirrored internal disk space
I would like to implement LDOM's here. I would like to confirm if we can have the guest domains booted off from the SAN storage LUN's. (Guest OS to be installed on LUN's exported to T2000 from 2540 storage)
Any help will be highly apreciated
Many thanks in advance
Ushas symonHi,
Guest LDOM images can be on anything, as it is transparent to the LDOM. Remember the Control domain is actually serving the filesystems to the guest LDOM`s. So they can either be whole LUN`s, zfs devices, mounted filesystems, anything really. You could even have a LDOM guest image on a NFS filesystem if you really wanted..
I have setup the majority of systems using the SAN attached to the Control domain, and then setup ZFS filesystems on these LUN`s and placed disk images on the ZFS filesystems. This means that we can use ZFS snapshots on the control domain if we need to do any patching etc.etc.
I would also suggest that you have a minimum of 2 connections to each of your SAN devices. One connection is bad, m`kay? :D
Edited by: krankyd on Sep 23, 2009 1:01 AM -
My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd. -
I was one this site for 20+ Days and found a fix for 10.2.1 when it failed. I Uninstalled all, following other attempts that failed, then installed latest Version from Apple iTunes 10.2.12. I then uninstalled Apple Mobile Device Support (AMDS) and installed AMDS from the older 10.0 version of iTunes. Success it worked. Today, I am now back to old problem, iTnes takes very long time to open and fails to see my device when connected (iPhone). I really only have iTunes for my iPhone no extensive library a few hundred CD's in music location and no podcasts. I have less than 6 moveis and want to update them now. I am willing to lose all in iTunes library if need be just to get computer to see G3 iPhone with iOS 4.2 and let me synch once again. I like security of backup too. It older iTunes may now not support, that too is OK. I still want to get the 3GS (no 4G desires, yet) and do not care if any of it is the latest from Apple as long as it works.
Hi Erik,
Your basic suggestion actually worked for me. But this is what I did for others who are having issues removing/installing etc.
1. Download the latest iTunes 8.2. You should end up with a file iTunesSetup.
2. If you dont already have WinRAR, download free copy from http://www.rarlab.com/ and install.
3. Right click on iTunesSetup and choose "Extract" to somewhere you know. eg C:\itunetemp
4. Open up folder where you extracted iTunesSetup and double-click applemobiledevicesupport.msi
5. It should ask you if you want to repair or remove... choose remove.
6. REBOOT your PC.
7. Go back to where you extracted iTunesSetup and double-click applemobiledevicesupport.msi and go through the install.
8. Plug in your iPhone.
If all is well iTunes should automatically start and start syncing your iPhone.
Goodluck all!
Cheers. -
I installed CS3 from backup to a new iMac when my old iMac failed. How do I activate CS3 suite?
When I try starting Photoshop, for example, it tells me uninstall then reinstall the product OR contact product support.
However, when I phone product support, it says there is no product support for CS3 and to go to the Forums.
Thank you.>from backup
Mac Migration and Time Machine DO NOT WORK with Cloud program activations due to hidden files
You need to uninstall and do a fresh install with your serial number -
Getting an "installer failed to initialize" error when installing CS5 from CD
Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html -
When Creative Cloud updated a few days ago (Win7) it reported I had no installed apps.
In Lightroom I keep getting messages that a new version is available. Installed it from CC and it installed without error, CC shows I installed it, but it simply fails to run.
How do I get CC to find apps installed under the previous version?
And how do I get Lightroom CC to run?
PeterI still don't know how to get CC to find that I have Photoshop CC installed, but running Creative Cloud, going to Preferences and signing out, then signing in again got Lightroom CC to work.
Since Photoshop CC is still working despite apparently not being installed things are now OK, at least for the moment. But I'm not feeling at all happy with Adobe. -
hii,,, i am using iphone 3g, i am trying to install apps from apple store,, installation stop in middle,and say,, u have to do install through itunes from your laptop. when i am trying to install it from my laptop,, its failed again n again,, help me out ,
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Maybe you are looking for
-
Photo orientation in photo grid
All of my photos in the photo grid are horizontal. Is there a way to change some to a vertical orientation?
-
ATV3 plays wrong song and has gap at the beginning
Hi there, just got my ATV3 exchanged, because the old new one has got this media-library-connection-error, however with the new one I am experiencing a strange behaviour via WLAN and via Ethernet. Whenever I stream music and skip songs manually playb
-
Quoted form of the POSIX path & drag n drop
Hi. I have the following situation: A part of a script-application that copies files over the network checks if there is actually enough disc space left on the target volume using the df and du commands. This is how I do it: on open (dragged_items) m
-
I have a 4 year old MBA. It was not booting... so I was able to start it in SAFE mode and run a hard disk check. The report was the hard drive is corrupt and I should turn off and boot with a start up disk. Then run another hard drive repair. My
-
PrE12 video editor crashes on launch
Hello - my first time posting in this forum. I just installed PrE12, and it will not launch the video editor. When I try from the welcome screen, shows the processing bar for a few minutes, and then dumps me right back at the welcome. If I launch the