Install Problems: CS 5.5 on MacBook Pro

Hi, folks—
I've got a brand new MacBook Pro. Plenty of RAM and HD space. I'm trying to install CS 5.5., and the installer crashes the computer every time. Specifically: About 20% into the install, the installer freezes, then the whole machine freezes, forcing me to restart it manually with the power button. This morning, it shut down the computer, and when I restarted it, my desktop had been totally rearranged. Bizarre!
Any help?
Thanks,
David

The installers run as applications and not as privileged system code. As such, the installer itself does not have the capability of crashing and or shutting down your entire system. At worst, the installer could crash itself or hang itself which would be remedied by force quitting the installer.
The symptoms you describe sound like some type of either driver, operating system, or more likely, a hardware problem with your “brand new” system, possibly with the hard drive or even memory. Are you installing from a DVD? If so, try copying the DVD contents to a directory on your hard drive and installing from there. That would eliminate the DVD itself or the drive from being the source of the problem.
- Dov

Similar Messages

Problem with installing Flash player 14 in my Macbook Pro

I tried to install Flash player 14 in my Macbook Pro, however, it stuck at "retrieving install" screen, it is supposed to be a new version, anybody has the same problem?

Yes same issue. I even tried chatting with adobe support but they did not help as I am not a paid subscriber. I have seen many others with the same issue. I hope adobe is aware of this. am trying to contact them.

HT1222 Anybody else having problems installing itunes version 11 on a MacBook Pro?

Anybody else having problems installing itunes version 11 on a MacBook Pro? Is so, how can they be resolved?

You need to tell us exactly what messages you are seeing.
You posted this in the OSX 10.4 forum but your computer profile says you are running OSX 10.6.8 Which system version you are running makes a big difference.

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

You could just try changing your Input Sources under System Preferences>Language & Text:
But I kind of doubt that's going to work. It may be a hardware problem or a system problem. If you take it into Apple they might be able to determine which and might advise a reinstallation of System software. I would take it to an Apple Store or an AASP but, first, make sure that you have a backup just in case they suggest a clean install of the system.
Good luck,
Clinton

Is anyone having trouble installing Adobe flash player on a MacBook Pro?

Is anyone having trouble installing Adobe flash player on a MacBook Pro with OSX 10.7.5?

Thanks for your help here is what I did so far!
I have uninstalled Adobe and reinstalled it, I've tried restarting my browser, then my MacBook Pro without any success!
When I click on the Apple in the upper left hand corner and open System Preferences I can see Adobe Flash Player on the bottom under the Other section.
If I open Adobe up and check the version it tells me that I have the most recent version!
I even uninstalled Adobe and installed the newest Beta version, but Adobe is still not working! If I check for the latest version it tells me that I do have the latest beta version, but it still doesn't work!
If the person who made the video used any other video player it works!
Their player, plays the video without a problem!

HT1338 How to install Norton 360 Everywhere into my Macbook Pro as it needs Mac OS x 10.7 ?

How to install Norton 360 Everywhere into my Macbook Pro as it needs Mac OS x 10.7 ? I can't install it into my Macbook Pro and how can I solve the problem ? Thanks.

The solution is not to install Norton at all. Use the search feature to read about it.

Installing 10.6 on iMac using MacBook Pro install DVD

Hi
I have a 24inch intel 2 core iMac from early 2008 with 10.5.6 installed and I just bought a MacBook Pro with Snow Leopard. I want to upgrade my iMac to 10.6 but before I purchase it I wanted to check if my apps etc would work.
I used the MacBook Pro dvd to install to an external drive and then I restored that drive. I then migrated my iMac install unto the external 10.6 drive and I am now running from the external drive on the iMac.
All seems to be ok for now but should this work? Do the different cd's have specific drivers or setup specific to the device i.e. might I be missing software or have the wrong software installed and thus invalidating my test?
Yes, I know what I have done is not strictly allowed but there is no other way to test an install without purchasing and I can't afford downtime to fix any problems.
Thanks

Allan Eckert wrote:
Hi cypher6x;
If you are willing to ignore the fact of it being illegal, then you will be leaving yourself open to the fact that the vast majority of the time when one uses hardware specific DVD for different hardware it doesn't install at all. When it does it usually causes more problems that it is worth so go ahead and pay the $29 and do it legally and correctly.
Allan
It installs and runs. I will purchase the proper dvd *IF all my apps works ok* otherwise I will not be upgrading anytime soon. I am just trying to ascertain if my test is valid.
It would cost Apple more to package up different dvds for all their products. I imagine they may have different installers though that selects the items.
Either or, it will be hard to say unless I do a diff against fresh installs using both dvd's.

I installed an software Update on my MacBook Pro and after that my laptop wont reboot passed the gray screen?

After installing a software update on my Macbook Pro, it would not reboot passed the gray screen and then would shut down.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time...

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

saturnotaku wrote:
Csound1 wrote:
Windows XP is not supported, install Windows 7 or 8.
Reading the entire post is your friend:
I have tried to do the same thing using a Windows 7 disc with the same results.
Perhaps you could offer a suggestion then.

How Do I Install Windows 7 to Early 2013 Macbook Pro?

I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release?
If So, How do I do this?
Can it be done to an extrernal 1TB Hard Drive that I can plug in and use only as needed?
Will I be able to install Microsoft Office 2010 to only the Windows SIde?
How do I do this?
Thanks Ahead of time.

Limbic_Pastry wrote:
I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release? ...
While it's possible to run Windows 7 or the Mac OS using Bootcamp, you can run Windows 7 and the Mac OS at the same time by creating a virtual machine (VM) using VMware Fusion, Parallels, or Virtual Box. One advantage of a virtual machine is that you can put the VM file on an external drive so that the VM file size isn't limited to available space on your internal. Another is that you can back up that file and/or create snapshots of the state of Windows at any point in time and revert to that state in seconds if something (e.g., a virus infection) goes terribly wrong. I have such a setup running in a rMBP early 2013 myself and it's very fast.

Install Problems: CS 5.5 on MacBook Pro

Similar Messages

Maybe you are looking for