Install problems on windows 7 x64 (CS5)

There are any known problem on installation progres of CS5 on W7 x64?? I tray to install it many times and i can't. Any one know any problem?

Hi Ubik,
Please let us know the product you are installing. Also what is the error message you are getting?. At what stage of installation are you getting this error? We will be able to answer you with those details.
Regards,
Bobby Johnson.

Similar Messages

Windows 7 x64 CS5 Install Failure (Exit Error 7)

In case you've gotten this error, look here:
http://forums.adobe.com/message/2777085#2777085
There's a couple of suggestions as to how to workaround the error, but none seem too promising.

More here, plaguing Photoshop 64 bit:
http://forums.adobe.com/thread/629188?tstart=0
The error seems limited to certain installations of 64 bit CS5 (Suites, Photoshop, Premiere Pro and After Effects) on Windows 7 x64.

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

Install LabVIEW on Windows 7 X64

I'm trying to install LabVIEW from NI Developer Suite Third Quarter 2009 on Windows 7 X64 machine. The install program terminates with an unexpected error. I can install LabWindows/CVI from the same DVDs onto this machine.
Solved!
Go to Solution.

I'm adding my own experience in installing LabVIEW 2009 onto Windows 7 (64 bit) in case it helps anyone else, but in fact there's no magic bullet for the problems I had, I did it the hard way.
I saw no error messages at all, just that when the installer wanted DVD no.2, the DVD drive seemed to disappear. Cursor remained as Windows 7 "timer donut", could do very little with PC except "master reset".
I tried:
A different DVD drive
Upgrading to Windows 7 sp1
Compatibility mode for Vista (as suggested above)
In the end I just copied the contents of the 3 install DVDs onto my hard disk. I named the directories as the DVD labels, and was impressed that the installer found all the parts automatically. Until it got to the Device Drivers DVD, which I had forgotten to copy, but mercifully at that stage I could browse to the DVD drive. No special compatibility settings used, but I did run setup.exe "as administrator".
I'll put this down as a Windows 7 bug (and maybe specific to my hardware ?) rather than an NI problem.
Along the way, as part of the sp1 upgrade, I got MS IE9, another great way to drop one's productivity (certainly made posting to this forum impossible, this done on a different machine).

MSI 6670 MD2GD3 causing mouse problems in Windows 7 x64

Hello! I bought a new PC and I`m experiencing a very annoying bug. My configuration is: CPU: AMD FX 8350, Motherboard: Asrock 990FX Extreme 3, 16 Gb Corsair DDR3 1600, Kingstong HyperkX 3K SSD + WD Caviar Black 1TB HDD, Graphics card: MSI 6670 MD2GD3 and a 550W PSU.
I installed Windows 7 Ultimate x64 on it. Everything loads up very smooth and fast but the mouse is driving me mad! After alot of testing with different mouses and different components i changed the graphic card with another one, from a friend (different brand). The problem went away... until i put my HD 6670 back in. What happens exacly is... the mouse behaves as if it sticks on clickable objects (links, buttons, etc). It lags for a fraction of a second than jumps to where i am trying to point it. It also freezez for a short moment when i open some programs. It doesn't do this everytime but it's very annoying... it ruins the whole experience of using a new PC I have all the latest drivers and BIOS updates... The temperature of the system is more than ok... I can't find another explanation apart from the video drivers... Can anyone pls help me?

The other video card was an old Radeon X800 GTO on PICE. The PSU is actually 520W, it's Booster SPS-520... i think it's a normal ATX psu. I am begining to think it's more and more a driver related problem... X64 driver problem to be more exact (i tested the video card on a Windows 7 32 bits setup and everything was ok). But on my 64 bits Windows, when i try running a program that is just a bit demanding for the first time... the mouse freezez for half a second while the program is loading. For example... after i turn on the PC... (i give it time to load up)... when i launch Google Chrome the mouse freezes for half a second. I did alot of testing around (i`m obsessed with this problem ) and it turns out that the lag is much smaller if only one dispay is connected to the PC. Usually i have my tv connected to the PC as well, through a HDMI cable... and it's set to duplicate. Anyway, like i was saying, the freeze take less time when only one display connected, but it still freezes :(. Another strange thing: before instaling the video driver, when it's runing on Standar VGA driver, i can open Google Chrome for example and there's no freeze, everything loads up perfectly :| Is there anyway to fix this? Do u think the store i bought my video card from would accept it back if i pay off the difference and buy a more high end card from them? :(

Lenovo y510p audio problem on Windows 10 x64

Hi i am using lenovo y510p and i having some problem.After installing Windows 10 x64 I can`t use the 5.1 speakers connected via optics. At sound check box gives "Failed to play test sound"/
To solve these problem I tried:
1. Reinstalt drivers Realtek (tried as a version from official Lenovo suport and the latest version from Realtek);
2.Plug and unplug optics (Realtek Didgital Output) in "Sound";
3.Restart the Windows Audio service.4. Reinstalt chipset and audio drivers.
Now the external speakers working in stereo .

The drivers listed for under Y510p was not the lastest for our audio hardware, hence why I gave you a link to (what I think) is the latest version. Those should have no problem working under Win 10 (and maybe Win 8.1).
Y510p has a "weak" audio chipset in the sense that it isn't handled well by the drivers providided on Realtek's homepage.

OBIEE install problem on Windows 2008 R2 64bit server

Hi!
I have for 1 month struggled with a OBIEE 11g install on a Windows 2008 R2 64 bit server. (I have a open SR at Oracle but have not got any answer/suggestion for 2 weeks)
I follow these documentations:
Oracle® Fusion Middleware
Installation Guide for Oracle Business Intelligence
11g Release 1 (11.1.1)
E10539-01
and
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
Specially chapter 4.4.4 for the moment, cant get pass step "Specify Installation Location"
First did I run RCU against our Oracle 11g database and created the schemas for BI Publisher
Then did I install JRockIT - jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
Then from JRockIT installed WLS_1035 generic.
Then configure AdminServer so thatone is up and running (even installed a HTML server from E1 to check if WLS is up and running and working)
Then start the installer (Oracle Business Intelligence, v. 11.1.1.5.0, for Microsoft Windows x86-64-bit) disk 1, setup.exe, then must I choose "software only" install. But on step 3 och 9 can I not press next, the installer says that I do not have any "Application Server" running. I have installed on E:\Oracle\Middleware but the installer can not see any application there, but I can access it thru a browser.
Tests I have done,
Install loopback adapter
Deinstall loopback
Deactivated everything but IPV4 protocoll (we have also IPV6 on all server).
Verified that we have static ip on the server
Tried installer for BIP (OBIEE) with WLS AdminServer running and without have it running.
And checked the installer logs everytime, no errors, no warning.
Is there anyone how can guide me or give some tips? I am getting frustrated after 4 weeks without success.
Best regards,
Anders

Hi!
It is the installer who not working properly, when using the "Browse", I had to choose a comletly wrong place first, and then again choose the correct installation path, after that would the understand where I wanted to install.
Best regards,
Anders

Instalation problems on windows 8.1

I have had problems with my Itunes for some time, I kept on getting an CD Drivers not found message and to re-install Itunes. So I had time today to mess around with it, so I uninstalled Itunes and when I would try to install, the installer would get to the point of coping files then roll back and give me an error message to download and install again? Is there a tool that will completely uninstall all file, even registry keys, or are there Faqs that would guide through a registry hack, to eliminate these crumbs that are peventing the insallation?

In order to diagnose your problem you will need to download and install the below
Install the WPT (Windows Performance Toolkit)
http://www.microsoft.com/en-us/download/details.aspx?id=30652
Help with installation (if needed) is here
When you have, open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following:
First level triage (if available), CPU usage, Disk IO.
If your problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry) Please configure yours as per the below snip. This will reboot your system so make sure you save your
work
Click Start
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called)
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

Oracle 8i EE Install problems on Windows 2000

Problem 1 - LENGTH OF INSTALL FILES PATH.
The Oracle Universal Installer was coming up fine, but the "Next" button wouldn't do anything. After much trial and error, I discovered this to be related to the path of the install files. Rather than burning to CD, I had copied the install files into a directory C:\ORA816 - when I renamed this directory to just C:\O, the "Next" magically began working. This problem only occurs on Windows 2000, not NT4.
Problem 2 - CREDENTIAL RETRIEVAL FAILED.
I got this error (ORA-12638) from the Database Configuration Assistant. This just happened, so I haven't had a chance to figure it out. Has anyone encountered/fixed this problem in Windows 2000? I am running the install as Administrator.
null

Re: Problem 2. Just found out that this problem is resolved by removing the line SQLNET.AUTHENTICATION_SERVICES from
%ORACLE_HOME%\network\admin\sqlnet.ora
(see: http://technet.oracle.com//tech/migration/workbench/htdocs/relnotes.htm)

Problem installing CF8 on Windows 7 x64

Hello. I am trying to install ColdFusion 8.0.1 64 bit on the Windows 7 RC x64. I already had CF8 on Windows 7 beta 32 bit OS and it ran just fine. For some reason I can't seem to get CF installed. I'm guessing it's because of the fact that it's a 64 bit OS, but I don't understand why. The installation process works fine until I get to the step where I have to configure my web server. I am trying to install CF on an Apache server (which I have successfully done in the past). When I click on the Add button, the JRE window pops up and freezes. Nothing happens when I click on the Browse button to point to the configuration directory or the bin directory. It won't even respond when I try to cancel out of the window. Any ideas are welcome right now, because I'm out. I don't know what to try. Thanks.

You'll need to setup 2 things:
- in httpd.conf you'll need to add the config entries to load the jrun
connector module (extract mod_jrun20.so from wsconfig.jar)
LoadModule jrun_module "C:/jrun4/lib/wsconfig/2/mod_jrun20.so"
JRunConfig Serverstore "C:/jrun4/lib/wsconfig/2/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51020
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
Alias /CFIDE/ "c:/jrun4/servers/cfusion/cfusion-ear/cfusion-war/CFIDE/"
- in jrun.xml enable the JrunProxyService and make sure it's the same
port as the one in httpd.conf
Bafta
Mack

Copying large files problem in windows 7 x64 professional

Hi!
I'm new to this forum and I recently installed windows 7 professional without too much trouble in my pc. The only thigs that doesn't work are the quicklaunch buttons (which I'm expecting HP to release it until october 22). The system is functioning ok, but I discovered a very serious problem when tranferring large size files (copy or move function) to an external source (in my case a external HD: model Western Digital My book 1 TB connected via USB).
When I try to move a file that is larger than 1 GB the system during the process gets slower and slower rendering my system useless unless I cancel the process and restart. This only happens when moving files from my notebook to my HD.
I've been doing my homework and I checked microsoft technet forums, here's what I found:
1.It seems a lot of people have this problem, in particullar the ones with an asus motherboard (which I know this isn't the case). But in my case since I don't know which motherboard my notebook has, I can't come up with a solution to this problem.
2. It seems to be a particullar problem with the 64 version of windows.
3. The users claim that the problem was solved when they upgraded the chipset, which I somehow tried but with the current vista drivers, but the problem wasn't solved.
4. Some users claim that by using other software like teracopy or grant full permission control seems like a workaround to this, but no in my case. It doesn't work.
5. With sisoft sandra I managed to get my motherboard from this notebook but with no luck finding information or upgrades to a Quanta motherboard.
Here are my system specs (link to the HP site describing it):
Model: HP pavilion 6950la
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01470050&lc=en&dlc=en&cc=us&lang=en&softwareitem=ob-55781-1&os=2100&product=3753762
Windows 7 professional x64
I'm worried about this and it seems weird to me that no one who has tried windows 7 professional x64 has mentioned this in the forum (or even mentioning it), because I think this is a really serious issue and I would like to make sure it gets known and hopefully solved during these days. I really don't want ot get back to vista just for this. And I hope my post will be useful to the HP people so they can get around this problem.
Thankd in advance, will wait for your answers.

Please repost your inquiry in the Microsoft Windows 7 Performance Forum.
Thank you!
Carey Frisch
Microsoft MVP
Windows Expert - Consumer

New Canon Pixma MG2220 printer - install problems on Windows XP

I bought a new Pixma MG2220 printer and received it 2 days ago. I followed the instructions and installed it from the provided CD on my 10 year old Compaq S4020WM desktop computer upgraded with 1GB RAM and 1TB hard drive running Windows XP SP3.
The CD installation took a very long time to complete (maybe an hour or so) and things did not work right. In particular the My Image Garden software was very slow and sluggish to respond. So I downloaded and installed the latest drivers and software from the Canon website on top of the existing installation, which did not help. The My Image Garden software began crashing completely with an error message about a bad .dll file. After talking to Canon tech support on the telephone, the support tech admitted that this software CD was probably not compatible with my old XP computer. The My Image Garden software uses like 500MB RAM which is too much resources for my machine. So the rep had me uninstall My Image Garden.
At that point I decided to uninstall everything and start over from scratch because something was obviously not right. For example, the Canon MP drivers were using 755 MB RAM, which seemed much too large. Obviously things had not installed properly from the setup CD, in general. The date on the setup CD was 2011, so apparently it was 2 years old, and long out of date!?
So I uninstalled everything except the Canon registration and onscreen user manual. I also kept Windows Adobe RGB 1998 because I didn't see any way to uninstall it. I also uninstalled .NET 4 which the setup CD had said was necessary, as well as Microsoft XPS EP which My Image Garden had also told me was needed. Then I cleaned up my computer as well as possible with help of Revouninstaller and Ccleaner, which was necessary because things were very messy with many uninstalled remnants and incorrect registry entries. I feel lucky to have survived those tasks without having to reinstall my op system. It wasn't easy.
Then I installed the following 2 modules (only) downloaded from the Canon website:
MG2200 series MP Drivers Ver. 1.01 (Windows 8/8...        01/31/13    14.07 MB
File Name: mp68-win-mg2200-1_01-ejs.exe
This file is a driver for Canon IJ multifunction printers. You can install the following items of the software: MP Drivers: The driver for Canon IJ multifunction printer. IJ Scan Utility: The software that allows you to easily scan photos, documents, etc.
*My Printer Ver. 3.1.0 (Windows 8/8 x64/7/7 x64/...        01/07/13    5.12 MB
File Name: mypr-win-3_1_0-ea11_2.exe
This file allows you to easily change the settings such as the paper source settings and provides you with information on how to solve problems such as ink smudging.
I believe that's everything required to access all of the print, copy, and scan operations of this MG2220 printer. Based on my current understanding, I would classify everything else as optional. I use free Irfanview for editing and manipulation of images, which seems a satisfactory substitute for the other software.
I did not reinstall .NET 4 or Microsoft XPS EP, because apparently they're only required if you install the My Image Garden and/or Quick Menu modules. I also did not reinstall the Easy-WebPrint EX module which apparently only applies to printing with the Internet Explorer browser, while I primarily use Firefox, Chrome, or Opera browsers. And of course I did not reinstall My Image Garden nor the Quick Menu, which were so problematical originally.
On the bright side, the Canon MP drivers appeared to install correctly this time, using only 35 MB RAM (vs 755 MB previously). Also the Canon IJ Scan utility was reinstalled automatically as a part of that driver installation process. Those items have their own shortcuts. I found it useful to make one additional shortcut via Start > Settings > Printers and Faxes > "Canon MG2220 series printer", to allow easy access to all of the internal printer settings and variables. Like I said, I believe this is all that's required, in addition to some image manipulation software such as Irfanview. I deal mostly with documents and never print photos nor use cameras. Those who have large photo collections and/or cameras may need something like My Image Garden or Easy-PhotoPrint EX.
I previously used Lexmark printers for the prior 10+ years, where everything is controlled by software from the computer. I never had to use the buttons on the printer. That's obviously different with this Canon printer, which will take some getting used to.
I'm disappointed that there's apparently no way to enlarge or reduce the % copy size with this model. Is there? I also don't find any setting for lighter/darker when making copies. Is there? There are apparently no other enhancements or filters available when copying. Are there? Similarly, scanning seems remarkably unversatile with this model and I can't find any way to set a scan for ligher/darker or apply various enhancements/filters. Are there?
The printing seems OK, but I must still decide whether the very limited copy and scan options will be sufficient to my needs. I'm not sure yet. I might take it back for a refund and get something better, if I knew what was better. That's another research project. Suggestions?
Thanks for any feedback.

Thanks for your info but the MG5420 is more than twice the cost at my local Walmart and Staples stores.
I thought I was being smart to buy the MG2220 as a later model(?), but it looks like the prior model MG2120 has more copier and scanner features according to the online specs at the Canon website (see copies below).
For example the MG2120 allows 25%-400% reduction/enlargement when copying, while the MG2220 does not. Can you verify this?
Also does the MG2120 allow for setting copying to lighter/darker? (I don't understand that complicated technical lingo in the specs.)
Thanks.
Pixma MG2120
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds8
Reduction / Enlargement   25% - 400%
Copy Features   4-in-1 / 2-in-1, Auto Exposure/Intensity Copy, Face Brightener/Fading Correction, Fit-to-Page, Gutter Shadow Correction Copy, Image Repeat, Intensity, Multiple Copy: 1-9, 20 Pages, Photo Reprint, Preset Copy Ratios, Zoom
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Document Fix, Auto Scan Mode5, Gutter Shadow Correction, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"
Pixma MG2220
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds3
Copy Features   Borderless Copy, Fit-to-Page, Multiple Copy: 1-9, 20 Pages
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Scan Mode, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

Can't install iTunes in windows vista x64 (error 0x80070002)

I have been encountering some trouble when trying to install iTunes in my Windows Vista 64-bit PC. When I attempt to install it, it gaves me a HRESULT: 0x80070002 error. I have been looking on the internet for a solution to this and have already tried everything. I also have the same error code when trying to make Windows updates.
I was wondering if there is a solution to this problem or do I have to reinstall my OS to get it right.

I think it would be a good idea to scan for malware as malware often interferes with Windows Update.
Download Malware bytes and run a full scan, there is a free version:
http://www.malwarebytes.org/
In services, check the Window Update service. It should show as "started" and start up type automatic.
The other thing is to run the system file checker:
http://support.microsoft.com/kb/929833
This will attempt to fix problems and if it will not run, that is another clue to the problem.

Install problems on windows 7 x64 (CS5)

Similar Messages

Maybe you are looking for