Install Standalone Oracle Database under Grid Infrastructure+ASM 11.2.0.2.

Hello. How should I install a 10.2 standalone server over ASM disks to be managed under Clusterware 11.2.0.2 in a 2 node cluster ? I mean, should I make 2 independent software/local installations and 1 database creation or is there a way to install on both nodes at the same time (like ASM in the Grid Installation)? Also, could be a RAC One Node installation be an alternative for this purpouse? Suppouse with RAC One Node it would not be a 10.2 server. But If I were looking for a 11.2.0.2 server what would be the differences between this 2 installations (2 standalones and 1 RAC One Node) ?
Thanks.

hi
basically you install automatically both grid (clusterware) and db software on all nodes defined during installation process.
But I see you want to manage 10g db by 11g clusterware, right?
You can add any application to be managed this way (automatic startup, sequence of startup...).
I'm afraid you need to add it manually to OCR (crs_register/unregister utilities).
When installing different versions of oracle software you need different localtions for their homes.

Similar Messages

Uninstall Oracle 11gr2 RAC database in grid infrastructure

Hi all,
After several attempt to install my Oracle database RAC with grid infrastructure, i want now to do a fresh installation as i have attempted 3 times and now i have all the procedure on installing the database and RAC.
Actually i have installed it correctly but now i want to cleanup my server and remove all oracle installation directory and do a fresh installation.
My question is what is the procedure to uninstall an Oracle RAC database and Clusterware with grid infrastucture and cleanup oracle base installation.
The architecture is:
GRID and clusterware: Oracle grid 11gR2
Database: Oracle database 11gR2
Database and grid storage: ASM
OS: linux centos 6
Thank you.
Raluce.

The deinstallation of Oracle GI could be not so easy thing to do, because it contains many components one should be aware of. The proper deinstall is important because it will safe you from many issues with next install on these servers
In general we need to be sure that:
1. all sowftware stopped properly
2. removed from oraInventory
3. binaries removed
4. /etc/oracle cleared
5. ocr and votes cleared using dd
6. /etc/oratab updated
7. .profile updated
8. init.d files in /etc/ cleard
Usually its recommended to use deconfigure scripts, if they fails for some reason, the manual procedure should be followed.
How to Deconfigure/Reconfigure(Rebuild OCR) or Deinstall Grid Infrastructure [ID 1377349.1]
How to Deinstall Oracle Clusterware Home Manually [ID 1364419.1]
As general recommendation its good idea to save your crs configuration for future reference.
Regards
Ed Rudans
http://erudans.blogspot.com

11.2 Grid Infrastructure 中如何找到ASM中存放的VOTEDISK

11.2 Grid Infrastructure 中如何找到ASM中存放的VOTEDISK
as TEST
[grid@vrh1 ~]$ asmcmd dsget
parameter:/dev/asm*
profile:/dev/asm*
[grid@vrh1 ~]$
[grid@vrh1 ~]$
[grid@vrh1 ~]$
[grid@vrh1 ~]$ gpnptool get
Warning: some command line parameters were defaulted. Resulting command line:
         /g01/11.2.0/grid/bin/gpnptool.bin get -o-
<?xml version="1.0" encoding="UTF-8"?><gpnp:GPnP-Profile Version="1.0" xmlns="http://www.grid-pnp.org/2005/11/gpnp-profile" xmlns:gpnp="http://www.grid-pnp.org/2005/11/gpnp-profile" xmlns:orcl="http://www.oracle.com/gpnp/2005/11/gpnp-profile" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.grid-pnp.org/2005/11/gpnp-profile gpnp-profile.xsd" ProfileSequence="32" ClusterUId="58a8249042c37f94bf844767ea0ae255" ClusterName="vrh-cluster" PALocation=""><gpnp:Network-Profile><gpnp:HostNetwork id="gen" HostName="*"><gpnp:Network id="net1" IP="192.168.1.0" Adapter="eth0" Use="public"/><gpnp:Network id="net2" IP="172.168.1.0" Adapter="eth1" Use="cluster_interconnect"/></gpnp:HostNetwork></gpnp:Network-Profile><orcl:CSS-Profile id="css" DiscoveryString="+asm" LeaseDuration="400"/><orcl:ASM-Profile id="asm" DiscoveryString="/dev/asm*" SPFile="/g01/11.2.0/grid/dbs/spfile+ASM1.ora"/><ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#"><ds:SignedInfo><ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/><ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/><ds:Reference URI=""><ds:Transforms><ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"/><ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"> <InclusiveNamespaces xmlns="http://www.w3.org/2001/10/xml-exc-c14n#" PrefixList="gpnp orcl xsi"/></ds:Transform></ds:Transforms><ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/><ds:DigestValue>4QgZH9s7FcMwoqnxGtKyG67K2tE=</ds:DigestValue></ds:Reference></ds:SignedInfo><ds:SignatureValue>GEUFGg6x2X4uVWDj9aBIW9pAmO/GRccSdHcrWNF1tDwsVMa8a7hdr2mKSn1k88lxzY55DgzsfGQ3h7e1ftpF/0zBLwWQMDME9msJ1wa+r6mNtin2dxOIqKZrcZAASe9/zhY24mnNeQnoCRC4at0UkgZiE6KfZdskyHSff2nC8Yo=</ds:SignatureValue></ds:Signature></gpnp:GPnP-Profile>
Success.
DiscoveryString="/dev/asm*
[grid@vrh1 ~]$ crsctl query css votedisk
## STATE    File Universal Id                File Name Disk group
1. ONLINE   85edc0e82d274f78bfc58cdc73b8c68a (/dev/asm-diskh) [SYSTEMDG]
2. ONLINE   201ffffc8ba44faabfe2efec2aa75840 (/dev/asm-diskg) [SYSTEMDG]
3. ONLINE   6f2a25c589964faabf6980f7c5f621ce (/dev/asm-diski) [SYSTEMDG]
4. ONLINE   93eb315648454f25bf3717df1a2c73d5 (/dev/asm-diskj) [SYSTEMDG]
5. ONLINE   3737240678964f88bfbfbd31d8b3829f (/dev/asm-diskk) [SYSTEMDG]
Located 5 voting disk(s).
[grid@vrh1 ~]$ kfed dev=/dev/asm-diskh op=READ| egrep "kfdhdb.vf|ausize"
kfdhdb.ausize:                  1048576 ; 0x0bc: 0x00100000
kfdhdb.vfstart:                     224 ; 0x0ec: 0x000000e0
kfdhdb.vfend:                       256 ; 0x0f0: 0x00000100
[grid@vrh1 ~]$ dd if=/dev/asm-diskh bs=1M skip=224 count=32 | od -c > /tmp/votedisk
32+0 records in
32+0 records out
33554432 bytes (34 MB) copied, 0.381144 seconds, 88.0 MB/s
{code}
如以上测试可以看到kfdhdb.vfstart kfdhdb.vfend 记录了VOTEDISK在ASM中开始和结束位置，而AUSIZE 则为单位大小
实际在11.2 GI ASM环境下不必刻意去备份VOTEDISK了， GI会自动将VOTEDISK 备份到OCR中！！！
改造Oracle中文技术生态环境！
*<font color="red" size="2" face="courier">如果觉得本回复有意义，请点击本条回复右手边的Correct按钮，谢谢！</font>*
<a href="如何在OTN中文技术论坛提一个问题？">如何在OTN中文技术论坛提一个问题?</a>
<a href="论坛礼仪需知及学习oracle的方法论">论坛礼仪需知及学习oracle的方法论</a>
Maclean Liu
Oracle Database Administrator
Oracle Certified 10g/11g Master
<a href="http://www.askmaclean.com">www.askmaclean.com</a>
请把需要上传的文件发给我
有问题请去OTN中文论坛开个帖子我会回复地址：http://www.otncn.org
如果需要发送附件，可以直接发邮件到 [email protected]

Using Linux 32 bit and 11gR2, on VMware.
During grid installation, i executed root.sh from root user and facing below issue:
*Failed to rmtcopy "/u01/app/11.2.0/grid/gpnp/rac1/profiles/peer/profile.xml" to "/u01/app/11.2.0/grid/gpnp/profiles/peer/profile.xml" for nodes {rac1,rac2}, rc=256*
rmtcopy aborted
Failed to promote local gpnp setup to other cluster nodes at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6803.
any ideas/suggestions, please...

Oracle 11g R2 Grid Infrastructure Installation stuck on 65%

Dear All,
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies. Have anyone of you encounter similar situation before? I can attach oraInventory logs as well if you want to have a look at that. Please let me know if you find any pointer or clue of this problem.
Many Thanks
Nukesh

No nothing was being copied, the /u01/app/11.2.0/grid directory was empty and nothing was adding to the log or err files.
Actually I found/resolved the problem and forgot about this post.
It happens that in staging my server, iptables was enabled which stopped the progress.
I had to issue 'service iptables stop' and 'chkconfig iptables off' AND REBOOT ALL NODES.
Simply stopping the service allowed the installer to continue, but eventually the root.sh script has problems. Rebooting both nodes resolved the issue.
Thanks

How to install two oracle database on one system

i want to install two oracle databases on single system how it is possible
how i can manager oracle home and is this possible to install two different version of oracle in single home or single system forexample oracle 9 and oracle 8 .
A.R

Hi,
yes, u can have more databases on a single machine and they can be of different versions.
You have to use and initialize the correct ORACLE_HOME to create the DB of the version U use.
For ex, u have 2 homes:
C:\Oracle\Ora817 8i home and C:\Oracle\ora920 9i home
Normally, using OFA, imagine that You want create 2 db, TEST_8I for 8i home and TEST_9I for the 9i home, You shold have:
C:\Oracle\Admin\TEST_8I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_8I for 8i DB adn C:\Oracle\Admin\TEST_9I\<<OFA DIRS>> and C:\Oracle\Oradata\TEST_9I for the 9i version.
It is important, when You create the DB, that u use the executables of C:\Oracle\Ora817\bin to create 8i db and C:\Oracle\Ora920\bin for the 9i one.
Then U can use the 9i listener to manage both instances
Hope this helps
Max

How to install standalone Oracle BPEL 10.1.3.4?

Hi I want to install standalone Oracle BPEL 10.1.3.4 (NOT SOA SUITE). Can someone give the URL for the documentation. Or can someone say the patches that need to be installed?

Just to clarify, there is no 10.1.3.4 install of SOA Suite or BPEL. You must install the 10.1.3.1 version first then apply the patch for 10.1.3.4, although 10.1.3.5 has been out for some time.
the 10.1.3.5 patch is available on OTN otherwise you need a Metalink account.
The upgrade process and patch is the same for both BPEL and SOA.
cheers
James

How to install Oracle 11.2.0.4.0 Rac Database on Grid Infrastructure 12.1.0.2.0 (Windows 2012 R2)

Hi all.
This is the scenario:
I have a 2 node cluster Microsoft Windows 2012 R2 x86_64, the nodes are part of domain.
Installed Oracle 12cR1 (12.1.0.2.0) as follows:
Installation done using domain administrator named "installoracle" that has been EXPLICIT promoted to local administrator in both nodes.
One domain user named "oracle12c" with no administrator privileges neither in the domain or nodes.
Installation, after a lot of customization in the OS of the nodes, has gone ok, perfect indeed, not even a warning during runinstaller execution.
All services and resources are up & running, I have rebooted nodes and all comes back ok in place. In windows services I can see some services started with "oracle12c" user, and all windows groups: DBA, SYSKM, etc, has been created.
Now I have to install Oracle RAC database in 11gR2 version (11.2.0.4.0) to accomplish with application requirements.
So, I execute runInstaller (setup.exe) logged as administrator via domain administrator "installoracle" (the one that was able to do the smooth 12c GI installation) and the gui comes with out problems, but at 4th screen the one in which you have to choose what kind of installation you want to do (Single, RAC or RoN) I select RAC option, the gui returns error: crs is not running in the local node...
Finally, in order to deliver some database 11.2.0.4.0 for my customer, I try to do installation of SW for Single Node, I did using "installoracle". The sw has been installed in one of the nodes. Then I have created a database and I have stored datafiles in ASM (this ASM is part of 12c clusterware) and also register the 11gR2 single instance database in the Grid Infrastructure listener
So, whats next??? Why is this behavior??? I did similar installations in Linux/Solaris with no issue (well as everyone can imagine, always there are some issues, but when solved you got GI in 12c and databases in the release that you want 12c, 11g, 10g...)
Any clue?
Thanks in advance!!
Best Regards!!

To go back to old version (without changing compatible parameter), you can perform downgrade.
Instructions are available at
How to Downgrade from Database 11.2 to Previous Release (Includes 11.2.0.4 - 11.2.0.1) (Doc ID 883335.1)
In this case you will having all the data file including the new one.
But remember database may not be in the same status as before (Before upgrade). it may have invalid objects of higher version after downgrade.
Downgrade is applicable only to successfully upgraded databases. In case upgrade faced some issue, do not try downgrade there.
Your second approach it not correct. Note that each datafile header will have db version. We can not open database in normal mode when header version and binary versions are different.

Reinstalling Oracle 11gR2 RAC Grid Problem - ASM Disks Group

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller in the first VM rac1 from step 1 to step 9 of 10.
On the step 9 of 10 in the Wizard, accidentally, I touch the Mouse, and the Wizard is gone.
The directory for installing Grid in the 2 VMs is the same: /u01
In order to make sure everything is correct, I delete entire directory /u01 in the 2 VMs and install Grid in rac1 again.
I have understood it's not the right way to delete /u01. The right way is to follow the tutorial
http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEFHAC
But I have deleted /u01 and need to fix one by one. I install Grid again and get the error message on step 5 of 9 as follows:
[INS - 30516] Please specify unique disk groups.
[INS-3050] Empty ASM disk group.
Cause - Installer has detected the disk group name provided already exists on the system.
Action - Specify different disk group.
In Wizard, the previous Disk Group name is "DATA" and its Candidate disks (5 ASMDISKs) are gone. I try to use a different name "DATA2", but no ASMDISKs come up under "Candidate disks". For "ALL Disks", all ASMDISKs cannot be selected.
I want to use the same ASM disk group "DATA" and don't want to create a new disk group.
My question is:
How to have the previous ASM disks and its group "DATA" come up under "Candidate Disks" so that can use it again ?
Thanks.

Hi, in case this helps anyone else. I got this INS-30516 error too was stumped for little while. I have 2 x 2-node RAC which are hitting same SAN. The first-built RAC has a DATA diskgroup. When went to build second RAC on new ASM disk new DIskgroup (but same diskgroup name DATA) got INS-30516 about diskgroup name already in use etc. Finally figured out all that was required was to restrict diskstring using button in installer to only retrieve the LUNS for this RAC (this was quick and dirty - all LUNS for both RAC being presented to both RAC). Once diskstring only searched for the LUNS required for this RAC only, e.g.
ORCL:DATA_P* (for DATA_PD and FRA_PD)
the error went away.
I also have DATA_DR and FRA_DR presenting to both RAC. Apparently it scans the header and if it finds a diskgroup name that is already in use based on the diskstring scan it will not allow reuse of the diskgroup name since it has no way of knowing that the other ASM disks are for a different RAC.
HTH

Missing Templates for Standalone Oracle Database

According to this link: [Templates Overview|http://www.oracle.com/technetwork/server-storage/vm/overview/templates-101937.html]
and this link: [Database Template|http://www.oracle.com/technetwork/server-storage/vm/database-092479.html] ...
There should be a template for a standalone (non-RAC) database.
But when you go to eDelivery there is no such template.
Why does Oracle not provide a template for the standalone database ???

You can use the templates for Oracle Enterprise Linux.
According to Readme:
"The oracle-rdbms-server-11gR2-preinstall package is installed in the templates
before the Oracle Linux 6 Update 4 templates. This package installs software
packages and sets system parameters that are required for Oracle single instance
and Real Application Cluster install for Oracle Linux Release 6.
This package creates the 'oracle' user, with an initial login group of 'oinstall',
a supplementary group of 'dba', and a home directory of /home/oracle. The
Oracle-validated package disables logins by the user 'oracle', and the password is
locked for the 'oracle' user by default. To enable the 'oracle' user account, log in
as the 'root' user to the guest virtual machine after it is booted."
If you choose to use OEL 6 Update 4 you can install the package using the package manager.

The step-by-step guide for installing the Oracle Database and Oracle9iAS Portal

All,
I made a step-by-step guide for installing the Oracle 8.1.7 database and Oracle9iAS 1.0.2.1 (HTTP Only) install on a 'clean' Windows 2000 machine. The guide has a screen shot of every single step that I went through to get an installation of the database and Oracle9iAS Portal to work.
Because I left my email in the guide, everyone will be sending me email with questions about their particular install. [What I really wanted was some positive feedback email to show to my manager... hint hint.] As I do not want to troubleshoot everyone's install by email, I started this thread.
Let's start the step-by-step install guide discussion here.
As a start, here is what I did NOT want to do with the guide: I did not want to 'redo' the current Oracle9iAS installation guide. So I did not put any conditions in the guide. This is just what I had to do to take a clean Windows2000 machine (no Oracle software on it) and get it to work. If I keep on adding conditions, eventually I will end up with the installation document.
Also, in the next version (for the Oracle9iAS 1.0.2.2) I will probably start over again from scratch as we are planning on addressing some of the issues with the install.
Another thing I plan to do is put the following direct links in:
Oracle9iAS Portal: Troubleshooting Guide
Oracle9iAS Portal: Diagnostics Tool
Oracle9iAS Portal: FAQ
Have a look at the above, as they will answer probably all of your questions... But if not post away!
Thanks,
Rich

We do have installed a Lotus Notes LDAP. Unfortunately, the documentation is company internal in German.
The steps, in general, where:
1) Create physical connection (obviously, you did that)
2) Deploy the XML Descriptor for the LDAP under "UM Configuration => Data Sources"
We used a derivate of the Sun One LDAP Profile.
3) Match the assignement LDAP Group --> EP Role --> EP User via EP user management
4. The user, in our case, is always created in the LDAP first (from a different LDA administration group) and is then visible in the Portal)
I know, this is very generic, but the "magic" is in the XML profile and I haven't seen any documentation about it yet.

.oui error in the install of oracle database client in a linux CentOS

I am installing oracle database client in eqipo linux CentOS, after making all the passages for the creation of the user oracle and its groups beginning the ./runInstaller application and appears to me the following error:
./runInstaller: line 66: /install/.oiu: cannot excecute binary file
as I can solve this
they can notify me the possible solution to the following e-mail?
[email protected] or
[email protected]

You may want to check these references for CentOS install:
Installing 10g Release 2 on Centos 4.3 & 4.4
http://www.dizwell.com/prod/node/50
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b15660/toc.htm
Oracle® Database Installation Guide
10g Release 2 (10.2) for Linux x86
Part Number B15660-02
Installing Oracle 10.2.0.1 on CentOS 5.0 (x86_64)
http://bderzhavets.blogspot.com/2007/04/installing-oracle-10.html
Installing 9i (9.2.0.1) Database on Centos 4.5
Installing 9i (9.2.0.1) Database on Centos 4.5
installing 10.2.0 on CentOS
Re: Got "java.lang.NullPointerException" installing 10.2.0 on CentOS
Link error installing 10gR2 on CentOS 4.4
Link error installing 10gR2 on CentOS 4.4
Re: 10g in vmware Centos
10g in vmware Centos
~ Madrid.

Reinstall Grid infrastructure ASM no cadiates.

Hi all,
we need to reinstall complete grid infrastructure.
At the point to choose the candidates for ASM to store OCS we habe only members no cadidates.
We try to low level format all LUN´s but installer still shows only member no candiates.
I witch format or how to reset theLUN´s to be a candidate not a member of the old installation.
how to change state of LUN ?
http://img.ly/images/1161043/full
Thanks
*T
Edited by: tbrinkmann on Jun 9, 2011 2:38 AM

Hi,
It is because the header of the disk still marked as ASM, you need to clean this header
run this simple command dd if=/dev/zero of=/dev/{your asm disk} bs=1024k count=50
Cheers
FZheng

Install of Oracle database 10g

I have installed 1 CD of the oracle database 10g. I have an icon, and can get into the system with my ID and password, but do I need a host string? I keep gettting a time out message and there is no reference to what this is? I am a student taking basic database class and the book the CDs came from is Modern Database Management , I am trying to get into SQL plus, do I need to place it in another file? I am operating off of windows, is there something wrong?
thanks,
Mary McClure

Apologies. That log was overwritten. I re-ran the install (basic) and left the create starter database box unchecked. I still received the missing file error I mentioned above, I did not get a database configuration assistant error however the DBCA still does not work.
Install logs are not overwritten - AFAIK, they have timestamps appended to them - Troubleshooting the Oracle&nbsp;Database&nbsp;Installation
I would not worry about the one missing file error reported for now. The database software install seems to be successful. What does "DBCA still does not work" mean ? Pl post the contents of the DBCA log file and any error codes/messages encountered.
HTH
Srini

How to make two standalone oracle databases into master/slave relationship

i'm not talking about RAC...
is there any way to make two oracle databases into master/slave relationship? one is hot one is cold, when the hot one is down, the cold one automatically picks up? and of course two databases are in sync all the time.
any experience?

DataGuard is an enterprise edition feature.
You could roll your own standby database by cloning the production system to a backup server and writing scripts that copy the archived log files from the primary to the standby and that apply the archived logs on the standby. Of course, the transactions that had been applied to the primary that were still in the primary's redo logs would be lost if the primary were to fail. DataGuard provides options to keep the standby more closely in sync with the standby to reduce or eliminate that risk, which is one of the reasons that it's an enterprise edition feature.
If you're on Windows, Oracle FailSafe may also be something to look at.
Justin

Oracle database 10g RAc an ASM configuration

Hi all,
I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
Our materials are bellow:
Hardware: RP 3440 (HP)
OS : HPUX 11i Ver 1
Storage: EVA 4000 (eva disk group)
The problem is:
Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
But we want to use Oracekl Clusterware + RAC + ASM
My question is if anybody know what is the best configuration, we want to use ASm.
Can we use HP serviguard and ASM.
Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
Thanks for your help.
Regards.
raitsarevo

Hello,
there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

Install Standalone Oracle Database under Grid Infrastructure+ASM 11.2.0.2.

Similar Messages

Maybe you are looking for