Install Updates task not working during Build and Capture in SCCM 2012

Working with a new SCCM 2012 installation.
We are trying to get a Build and Capture TS to install all updates for Win7SP1.
All packages are deployed to DP, build and cap machine is in a collection with all updates deployed to it. Agent installation parameters include "SMSMP" "SMSSLP" parameters. Machine is not being attached to the domain during OS install.
Updates can be pushed to existing domain machines, so obviously the updates themselves are working.
The task sequence works correctly to install the image, but "Install Updates" task just sits there and eventually times out. (No indication of updates being installed.) If this task is working, shouldn't I see a Downloading Updates progress bar, or was that
eliminated from 2012?

Same issue for me except I'm running 2012 R2 my B&C runs forever on Install Software Updates, eventually just rebooting and coming back to the login screen of Windows 7 without ever finishing the Install Updates.
Been working on it litteraly for weeks.
1- Tried adding .Net 4.52 as an application installation thinking maybe it would resolve the issue
2- Tried installing via Run Command Line + DISM all hotfixes that require 2 reboots as per (https://support.microsoft.com/en-us/kb/2894518)
3- Tried to simply REMOVE the same hotfixes from my Software Update Groups alltogether.
4- Injected all applicable software updates through Offline Servicing in the SCCM Console (Schedule Updates) on the Windows 7 DVD wim file. That way my logic was that once it would hit the Software Updates, there would be a lot less to install.
I'm at the point where I had to open a case with Microsoft Premier Support as of yesterday. So, nothing new to report yet. But yes, this is a true pain in the ***.
For the sake of comparison, I am running 4 Update Groups: one containing patches up to 2012. Another one for 2013, 2014 and 2015. I have patches for Windows 7 + Office of all categories except Service Packs.
If someone has any ideas, feel free to chime in.

Similar Messages

Getting Updated image through Config manager Build and capture process

Hi guys,
Looking for some pointers on getting the almost fully patched image out of configuration manager build and capture process.
I need below pointers:
- What and where to advertise\deploy software packages target? since its a new deployment, I believe it should be targeted to all unknown computers.
- How many times should I call 'install update' step in TS and where?
- What is the best way to patch image (if something is missed out during image capture) offline (since its config manager 2012 R2). when I pull schedule update list for offline schedule, does that only pull updates that are required for that image or it
pulls everything available as updates?
- I have done offline patch of image but still once the image is deployed it pulls office updates. Looks like , offline service just injects OS patches..right?
Regards,
Regards,

- Where? That depends upon what you what. But, going by the letter of what you asked, you shouldn't deploy any applications or packages if you want them on your newly images systems, you should make them a part of the TS using Install Software and Install
Application tasks.
- How many times? You should only need one although depending upon what you are deploying and if you are using offline updates, some folks add more. I typically use two one right after the Setup Windows and ConfigMgr task (just like the task sequence wizard
builds for you) to update the OS and "things" in the image and one at the end to catch additional updates for apps and components added during the TS. Note that you also have to initiate an update scan cycle for additional install update tasks to work. Do
this by adding a run-command line task before the second Install Updates task with the proper WMIC incantation.
- Offline Updates only injects CBS updates into the image which are typically just core OS updates. You should also update your image though to include non-CBS updates. Using a build and catpure task sequence makes this easy.
Jason | http://blog.configmgrftw.com

Install Software Updates Step fails during Build and Capture

I have run into a problem while attempting to use the Install Software Update task during a build and capture task sequence. I have MDT 2012U1 integrated into SCCM 2012.
The Install Software steps find and use the Deployment Points fine and the Use Toolkit steps similarly are able to download their source files from the distribution points using the Network Access account. The Install Software Updates step, however
fails with an access denied error in the CAS.log.
I have found that I can work around this problem by setting the DP to allow anonymous access. After checking this box, the software updates install during the build and capture task sequence. Unchecking the Allow anoymous makes the problem recur.
I would like to not have to have the "allow anonymous access" enabled on the DPs for obvious reasons. Other packages download correctly from the DP with anonymous access disabled - they use the network access account. Install Software Updates
is the only step that seems unable to use that account to talk with the DP.
Is this a known issue? Is there a work around?

Thanks for the information. I will give that a try. I do have the SMSMP & SMSSLP (not sure I need this one in 2012) filled in in the Configmgr client install settings. Before I did that, it couldn't even find the SUP.
I am a little skeptical that the hotfix will fix my problem since most packages are downloading from the DP fine - it is only Software Updates that are failing to download. On the other hand, it is clearly a permissions issue since allowing anonymous
on the DP resolves the issue, all be it in a way I am uncomfortable maintaining in the long run.
That KB replaces a lot of key Windows system files. Hopefully, it won't cause more problems than it solves.
---additional thought
I wonder, could it be that Packages that work without this KB have package share settings with "Copy the content in this package to a packages share on Distribution Points" cleared/unchecked? This setting is not available for patch packages
- so I wonder if it is enabled by default behind the scenes. That could explain why the patch packages are affected and not the other regular application packages I have are not. All my regular packages so far do not have the
"Copy the content" box checked. Clients would be accessing the packages differently I suppose based on whether it was through a packages share or through the new SCCM 2012 package storage thing with the hashing.

Install Software Updates in a WIndows 7 build and capture shooses wrong SUP

Hi,
My environment is the following.
One SCCM 2012 R2 Primary site server in a trusted domain, MP, DP and SUP. This site is reachable from the clients on the internal network.
One SCCM 2012 R2 server in an untrusted forest, MP, DP and SUP. This server is NOT reachable from clients on the internal nrowotk.
I am doing a build and capture of Windows 7 using a SCCM TS on a VM on the internal network.
When the Install Updates task Is running the SCCM client is trying to use the SUP in the untrusted forest instead of the one in the local trusted forest.
How do I force the SCCM client to use the local SUP instead of the one in the untrusted forest.
According to
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx it should prioritize the one in the local forest, but the build and capture PC is not member of the AD so it looks like it just uses the SUP that is
first in the list from the MP.
The blog also states that the SUP will not be shifted to the next one in the list before 4 failed scans at 30 minutes intervals so it will take more than 4 hours before the SCCM client will try the next SUP. At that time the TS has long finished the
Software Update task.
I thought about creating an entry in the hosts file on the capture PC with the name of the untrusted SUP and the IP of the trusted SUP to redirect the client to use the trusted SUP. I solution that might work but that I find very ugly.
What can I do to force the SCCM client on the build and capture PC to us the internal trusted SUP?
Thomas Forsmark Soerensen

The SUP info cannot be got from the Internal MP. Please review the Smsts.log file.
Juke Chou
TechNet Community Support

IN UPDATE TASK NOT WORKING

Hi ,
I have used IN UPDATE TASK with a function module. Also used COMMIT WORK after the FM. Even then it is not working. If I comment the IN UPDATE TASK it is working. Any clues please ?
Thank you,
Surya.

Hi Amar,
I assume that V1 and V2 are Start Immed. and Start Delayed under Attributes of FM( under Update Module). If so, I tried both , but no luck.. thanks for your reply.
Anyone have clues please let me know.
Thank you,
Surya

Build and Capture task sequence fails at 'Prepare ConfigMgr Client for Capture' step

The scenario is as follows:
Task Sequence is a Build and Capture of Windows 7 SP1 x64 Enterprise
There are 17 Applications installed split into 2 'Install Application' steps due to the 9 item limit
129 Software Updates are installed
SCCM 2012 RTM
I have built and captured on this system previously however there were no 'applications', just traditional SCCM 'packages'
All task sequence steps run successfully until it gets to the 'Prepare ConfigMgr Client for Capture' step and it fails here. Here are the relevant parts of the SMSTS.log file:
<![LOG[No certificates to delete]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1013">
<![LOG[Deleting Client properties from file C:\Windows\SMSCFG.INI succeeded.]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:922">
<![LOG[Reseting the Trusted Root Key successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1088">
<![LOG[Deleting instance of 'CCM_Client' successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:170">
<![LOG[Successfully reset Registration status flag to "not registered"]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:309">
<![LOG[Successfully disabled provisioning mode.]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1273">
<![LOG[Start to cleanup TS policy]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2773">
<![LOG[getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,389)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient"
context="" type="0" thread="2880" file="wminamespace.cpp:389">
<![LOG[ns.Query(sQuery, &spEnum), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,2800)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2800">
<![LOG[Wmi query 'select * from CCM_Policy where PolicySource = 'CcmTaskSequence'' failed, hr=0xffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="utils.cpp:2800">
<![LOG[End TS policy cleanup]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2821">
<![LOG[TS::Utility::CleanupPolicyEx(false), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\preparesmsclient.cpp,457)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880"
file="preparesmsclient.cpp:457">
<![LOG[Failed to delete policies compiled by TaskSequence (0xffffffff)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:457">
<![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:472">
<![LOG[pCmd->Execute(), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\main.cpp,136)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="main.cpp:136">
<![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="main.cpp:136">
<![LOG[Process completed with exit code 4294967295]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="commandline.cpp:1098">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="instruction.cxx:3011">
<![LOG[Failed to run the action: Prepare ConfigMgr Client for Capture.
Unknown error (Error: FFFFFFFF; Source: Unknown)]LOG]!><time="15:35:21.046-660" date="11-13-2012" component="TSManager" context="" type="3" thread="2152" file="instruction.cxx:3102">
It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
and removed - however I would rather avoid this very time consuming process if possible.
I have also testing this using 'capture media' in the full OS and that also fails at the same step with the same errors in the smsts.log
The only workaround I have for now is to let the task sequence fail at the 'Prepare ConfigMgr Client for Capture' step, then I uninstall the SCCM client using 'ccmsetup.exe /uninstall' and use the 'capture media' method - obviously with no SCCM client installed,
it skips the 'Prepare ConfigMgr Client for Capture' step and goes straight to the 'Prepare OS' step and then to the actual capture to the WIM step.
Anybody else seeing this or have any suggestions?
My Microsoft Core Infrastructure & Systems Management blog -
blog.danovich.com.au

It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
and removed - however I would rather avoid this very time consuming process if possible.
You dont have to test it 18 times....
Just test with 50% of the applications first, if it fails, test with 25% and then on of the time...
You should be able to find the application, within 4-5 tests...
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
http://www.ronnipedersen.com/ and SCUG.dk/ | Twitter
@ronnipedersen

Build and Capture - Windows 2012 no longer possible

Dear all
We are using SCCM SP1 and facing since May 2013 the following problem:
Our - until May 2013 working - Task Sequence to build and capture our Windows 2012 Datacenter Image does not capture when we install updates during this sequence.
The following steps are working:
- Restart in Windows PE
- Partition Disk 0
- Apply Operating System
- Apply Windows Settings
- Apply Network Settings
- Setup Windows and Configuration Manager
If the next step is Install Updates, it installs the updates, reboot twice, shows again the status of the task sequence and then we can see the login screen from Windows 2012 instead of starting the step "Prepare Configuration Manager
Client".
As soon as we disable the Install Updates step, the task sequence can go to "Prepare Configuration Manager Client" and can successfully capture a new wim.
What could be the problem? Thanks for any hints.
best
JBAB

check your windowsupdate.log and see what updates it's installing, one or more of them is causing a reboot which the task sequence does not expect or like and that is probably your issue, remove that update(s) from the deployment and start again
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

SCEP Build and Capture

Is it a best practice to install SCEP together with its definition updates during build and capture? If yes, will the definition updates get installed during the "Install Software Update" step?

Hi,
Yes they will get updated, I normally don't include it in the image though but if you decide to do check out Chris Nackers post on how to install SCEP in a Task Sequence and update it as well, it is also great when deploying SCEP in the TS.
http://www.chrisnackers.com/2012/10/18/configuration-manager-2012-installing-endpoint-protection-during-a-task-sequence/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

It's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

Assuming you are not manually managing your music, verify the following:
You are using the latest version of iTunes
On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
In your music library you have checked all the songs you want to sync to your phone
There are no exclamation points next to any of the songs you want to sync to your phone
You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
You have checked "Sync Music" on the Music tab of your iTunes sync settings
When everything looks correct, sync your phone.

My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

Try resetting the Yahoo password. Yahoo not infrequently has problems.

Install Updates step fails in Build and Capture (error code 87D00272)

Hello,
I was really hoping someone could help me with this.
Background information:
- We have a CM07 server in a production environment.
- I've set up a CM12 RTM server, following the guides in this forum, with the hopes of migrating soon.
- I wanted to do OSD from scratch to learn more and to take advantage of new features in CM12.
- I have a few virtual machines running for testing OSD/apps (these are the only clients managed by my CM12 server).
- Since it's not possible to have two WDS servers running at the same time AFAIK (without using registry tweaks, the F11 trick, that by the
way doesn't work for me) I have created a bootable TS media that I mount on the virtual machines whenever I want to test OSD.
Now, to my problem:
I can't figure out why my Build and Capture TS is failing on the Install Software Updates step. smsts.log file says: Failed
to RefreshUpdates, hr=087d00272, followed by: Failed to run the action: Install Software Updates. Component is disabled (Error: 87D00272; Source: CCM).
I have read about similar issues occurring in CM07 capture task sequences since the machine is joined to a Workgroup. The proposed solution was adding SMSSLP=FQDN to the client installation properties, but since that functionality is moved to the MP in CM12,
it should be enough to specify SMSMP=FQDN in my case. It's not working anyway. Tried it to a Deploy TS also, where the machine is domain joined, but I got the same error.
The error code 87D00272 returns no results on Google. This stumps me, as someone surely has had the same problem? Here are the relevant portions
of the smsts.log file
If someone had the chance to look at this, I would greatly appreciate it. Thank you!
Refreshing Updates InstallSWUpdate 2012-06-13 10:15:33 228 (0x00E4)
spInstall->RefreshTargetedUpdates( spCallback, &bAlreadyCompleted ),
HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\installswupdate.cpp,467) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
Failed to RefreshUpdates, hr=0x87d00272 InstallSWUpdate 2012-06-13 10:15:34 228
(0x00E4)
RefreshTargetedUpdates(spInstall, spCallback, bAlreadyCompleted), HRESULT=87d00272
(e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\installswupdate.cpp,1295) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
RefreshUpdates(), HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment
\installswupdate\installswupdate.cpp,906) InstallSWUpdate 2012-06-13 10:15:34
228 (0x00E4)
InstallUpdates(pInstallUpdate, tType, sJobID, sActiveRequestHandle),
HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
\main.cpp,248) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
Setting TSEnv variable SMSTSInstallUpdateJobGUID= InstallSWUpdate 2012-06-13
10:15:34 228 (0x00E4)
Process(pInstallUpdate, tType), HRESULT=87d00272 (e:\nts_sccm_release\sms\client
\osdeployment\installswupdate\main.cpp,304) InstallSWUpdate 2012-06-13 10:15:34
228 (0x00E4)
Process completed with exit code 2278556274 TSManager 2012-06-13 10:15:34
912 (0x0390)
---------! TSManager 2012-06-13 10:15:34 912 (0x0390)
Failed to run the action: Install Software Updates.
Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
10:15:34 912 (0x0390)
MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
2012-06-13 10:15:34 912 (0x0390)
Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
/ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
Set a global environment variable _SMSTSLastActionRetCode=-2016411022 TSManager
2012-06-13 10:15:35 912 (0x0390)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager
2012-06-13 10:15:35 912 (0x0390)
Clear local default environment TSManager 2012-06-13 10:15:35 912 (0x0390)
Let the parent group (Setup Operating System) decides whether to continue execution
TSManager 2012-06-13 10:15:35 912 (0x0390)
The execution of the group (Setup Operating System) has failed and the execution has
been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2012-06-13
10:15:35 912 (0x0390)
Failed to run the last action: Install Software Updates. Execution of task sequence
failed.
Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
10:15:35 912 (0x0390)
MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
2012-06-13 10:15:35 912 (0x0390)
Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
/ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
Launching command shell. OSDSetupHook 2012-06-13 10:15:45 1932
(0x078C)
executing command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
10:15:45 1932 (0x078C)
executed command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
10:15:45 1932 (0x078C)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:
\nts_sccm_release\sms\client    asksequence    smanager    smanager.cpp,756) TSManager
2012-06-13 10:16:57 912 (0x0390)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2012-06-13
10:16:57 912 (0x0390)
TSManager 2012-06-13 10:16:57 912 (0x0390)
Task sequence execution failed with error code 80004005 TSManager 2012-06-13
10:16:57 912 (0x0390)

I can add that I've looked at the Site Status in the Monitoring tab, and everything looks green apart from some Warnings about User and System Discovery. In Component Status, I have a warning about the Distribution Point on C$. I thought placing a NO_SMS_ON_DRIVE.SMS
file in the root of C: would mean no stuff was placed there? I can't see anything SCCM related, but it seems that it has placed a DP on C:?
The error message about DP is:
Distribution Manager has not tried to install IIS component of operating system to distribution point "["Display=\\CFGMGR-SRV.zenit.brummer.se\"]MSWNET:["SMS_SITE=PS1"]\\CFGMGR-SRV.zenit.brummer.se\". You should install and configure IIS manually. Please
ensure RDC is also enabled.

Build and capture task sequence stops after apply windows updates

Hi
SCCM 2012 SP1 CU4. Deploying Windows 7 SP1.
Pulling my hair out over this one. I successfully performed a build and capture installing some applications. When I choose to install Windows updates, the updates install, the system reboots then doesn't continue. Applications don't install, image isn't captured.
I've tired using the default B&C TS and receive the same results. I've amended the TS to as follows, as suggested in a technet forum post: https://social.technet.microsoft.com/Forums/en-US/a535e509-fc6a-483c-bf24-7e2aa064e5b7/deploying-100-of-available-software-updates-during-a-task-sequence?forum=configmanagerosd
Looking at smsts.log there's errors relating to not accepting the license agreement, but I didn't think this would stop the TS.
Can someone point out why the deployment stops?
https://dl.dropboxusercontent.com/u/23479177/smsts-20141113-182413.log
Cheers

This is very common scenario you´re having! :)
For OSD and for Capture I always create myown Software Update Group, which lets me totally control, what updates goes to the image and which doesn´t. I then edit membership of update and tag or un-tag update to the group.
I suggest you do the following:
1. Create manual Computer record and add it to OSD Capture collection.
2. Create SUG for OSD Capture and un-tag updates which are listed in KB2894518. But that might not be enough.
3. Deploy TS to the OSD Capture collection.
4. Create/modify virtual machine with MAC matching the computer record.
5. Run PXE and hook Capture TS.

After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are not working.

After updating My iPad 2 to iOS 5.1.1 , my newly installed apps are not working . When I try to open the app the screen just flashes and then nothing happens. Built in apps works fine . Please help

I realize that installing apps is not the problem. Installing another app from the app store is a recommended troubleshooting tip from Apple if all of the third party apps will not open. It resets your iTunes authorization when you install the app because you have to enter your password.
If you didn't install another app try it. Read this support article as well.
iOS: Troubleshooting applications purchased for the App Store
Try this as well. Quit all apps, reset the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad.
Go back to Settings>Store>Sign in and then see if the apps will launch.

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Install Updates task not working during Build and Capture in SCCM 2012

Similar Messages

Maybe you are looking for