Install/upgrade failsafe 3.04 fails

Hi,
I'm trying to upgrade OFS 2.1.3 to 3.04 in Winnt 4.0 /sp6/MSCS server. Removing th OFS from node A works fine, but when I launch the Universal installer I get this error: a popup with message text "The exception unknown software exception (0xc00000fd) occurred in the application in location 0x77f8f205. Click OK to terminate the application".
The installer works in a workstation and our DEV server with no Cluster server installed but fails in cluster environment. Anybody with a solution for this problem?
Sincerely,
Pekka Klemola
email: [email protected]
null

Does anyone has a document that describes this error and the solution?
I cannot test it on a testplant...so i have to make sure that this is the fix.
BR

Similar Messages

Flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse

flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse was detected by my antiviral software.
Please can you help?
Prof_ST

Hello Wojislav,
Thank you for your prompt response. Yes, I can do that but don't you think that it would be preferable if the installer/update script didn't evoke this response? None of my other software updates does and while I would like to trust people, these days it gets harder and harder when folks are willing to lie and cheat at the drop of a hat and without compunction. It does not help either that false sites (Adobe mimics) have been installing Trojan Horses so it would be safer all around to remove that foible. It is just not very good. Or at least, it does not look very good, which amounts to the same thing at first glance.
Thanks again for you concern.
Prof_ST
On Mon, 18 Mar 2013 00:06:45 +1000 Wojislav <[email protected]> wrote -
Re: flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse
created by Wojislav in Installing Flash Player - View the full discussion Modify antivirus
Script for automatic updates some programs identify as a Trojan horse
you have to put in trusted sources adobe installer
or simply do the following: disable antivirus, install adobe, Switch on antivirus
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5154714#5154714
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5154714#5154714
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5154714#5154714. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Upgrade of Common Database Failed (8.8)

Hi All,
I have succesfully installed SAP Business One 8.8 PL 10. Howerver when I try to upgrade to PL 12 I receive 'Upgrade of Common Database Failed'.
Any Idea?

I have the same issue: Common database upgrade failed with "Internal error (-805306369) occurred"

Unable to install / upgrade or remove Lenovo Solution Centre

I'm getting following error while installing/upgrading or while removing lenovo solution center. I googled for the error code & found the links with windows installer error issue. But my windows installer is working good and could able to install all applications except lenovo solution centre.
I tried to delete directory and to install the newer copy but still getting this error.
Kindly guide me to remove it completely(maybe registry items to be removed ) and get it freshly installed.

Was your win7 install a Shipped lenovo install or win7 from box store install?
LSC current is version 2.0.020, released march 20, 2013.
If you used system update, it MAY not offer the most current release.
LSC MSI install log is in C:\Users\YOUR id\appdata\local\temp\LSC.log .
If you used factory install version of LSC, it is old.
==
you stated 2 issues.
(1) Some lsc version wont execute, lets say factory version.
(2) Upgrade/reinstall of some version of LSC, does msi failure, 1721.
==
I just installed Latest LSC, will uninstall shortly.
(1) error 1, you need to perform your first backup IE RNR, windows backup. dah, backed up weekly for 18 months (rnr) . error 2, You do not have enough space to perform a backup operation.
exact screen:
If you have an additional external hard drive, you can back up your data to that device. To view Lenovo external hard drive options available for purchase, Shop now.
155 GB free on my second HDD, my backup drive. SHOP NOW. Last incremental was 328 MB.
(2) warranty expired (correct), Benefits to product registration ( did that in 2008). Register NOW. But it knew i had a 3 year warranty.
(3) Hardware scan recommended. Thank you, 1 correct, Still using pc-doctor.
(4) You have windows update set to not auto install. correct.
(5) Adobe-air self updated on the 2nd launch of LSC.
IF you 1721, you ahead of the game.
Just download the hardware check LSC (linux). Need ISO burner software. download Memory check if you wish.
My 1st year on current, 2GB memory failed, mouse failed, DVD burner failed. POS-lsc, point of sale? Use your favorite seach engine , search POS if you wish.
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Error 1628 when installing upgrade of Fixed assets

'Error 1628' Failed to installed is occuring when installing upgrade of Fixed assets to PL100.

Dear Lisa，
In order to try to resolve the issue, please do the following steps :-
1. Go to Start   > Run   > %temp%, then delete all the files present in
the temporary directory.
2. Then Reboot your machine.
3. Reinstall the FA addon as per following:
o Start SAP Business One. Log on to the appropriate company.
o Choose 'Administration' -> 'Add-ons' -> 'Add-on Administration'.
o Remove the add-on(s) from the company by marking them and
   clicking the left arrow button.
o Choose 'OK'.
o Close SAP Business One.
o In Microsoft Windows, choose 'Start' -> 'Control Panel' -> 'Add
   or Remove Programs'.
o Check if any SAP Business One add-on(s) are displayed in the
   list.
o If an add-on is included, uninstall it by choosing 'Remove'.
o Using Windows Explorer, locate to the add-ons installation
   folder. Depending on the different versions of SAP Business One,
   the default installation folder is 'C:\Program Files\SAP
   Manage\SAP Business One\AddOns\sap' or 'C:\Program Files\SAP\SAP
   Business One\AddOns\sap'.If you chose a different folder during
   the installation process, locate that folder. Delete all
   subfolders (folders named like the add-ons) and, if present, the
   "_common" folder (which contains the framework for add-ons).
o Locate to the SAP Business One installation folder. The default
   installation folder is 'C:\Program Files\SAP Manage\SAP Business
   One' or 'C:\Program Files\SAP\SAP Business One'. If you chose a
   different folder during the installation process, locate that
   folder.
o Open the following files : 'AddOnsInstall.sbo' and
   'AddOnsLocalRegistration.sbo' in Notepad and
   delete the imformation related to Fixed assets only,
    then save the file.
   Note: If you only installed fixed assets ,that means no other add-on installed ,you can completely Delete   the above files.
o Start SAP Business One.
o Log on to the appropriate company.
o Choose 'Administration' -> 'Add-ons' -> 'Add-on Administration'.
o Reassign the add-on(s) to the company.
o Choose 'OK'.
o Restart SAP Business One.
Hope it could be helpful.
Regards,
Eleven

Leopard problems after install/upgrade

Hi
I just installed/upgraded (from a black separately bought) leopard on my mum's iMac G5. The installation showed now problems, and then the computer restarted, booted up and gave me the account/log in screen. But here's the problem. After login in on (tried with several different accounts, but same problem), the computer freezes and then gives me the "you must restart your computer, hold down the power button," etc.
From what I've found online this is most likely a kernel error, so I tried Single User Mode (Apple(Cmd)+S), with "fsck -f" giving me = "The volume iMac appears to be OK."
I then ran Safe-mode and looked at the konsoll-log, and found these to be the last lines before the break down:
...stemStarter [59] kextload: kldload_frommemory() failed for module /Libary/Extensions/VirtualPCOSServices.kext/Contents/MacOS/VirtualPCOSServices
...stemStarter [59] kextload: a link/load error occured for kernel extention /Libary/Extensions/VirtualPCOSServices.kext
...stemStarter [59] link/load failed for extention /Libary/Extensions/VirtualPCOSServices.kext
...stemStarter [59] (run kextload with -t for diagnostic output)
And from what I can understand, it seems like it's an old version of VirtualPC on the computer, causing the problem?
Am I right? Does anyone now how to solve this?

I would recommend an [archive and install|http://support.apple.com/kb/HT1710?viewlocale=en_US]. it will give you a fresh copy of leopard while preserving your data and user settings. this will get rid of the extension conflicts which are causing the kernel panics.

Cannot upgrade adobe flash. installation fails to initianize. plse advise

cannot upgrade adobe flash. installation fails to initianize. plse advise

There are 2 versions of Adobe Flash:
*an '''ActiveX version''' for IE only
*a '''Plugin version''' for most other browsers including Firefox
*On a Windows system, you should always update both individually.
'''''You do not appear to have the Plugin version for Firefox installed. ''''' If you did, in Add-ons > Plugins you would see "Shockwave Flash ''(version)''". If "Shockwave Flash" is there and is disabled, click the "Enable" button.
Check your Plugins often --> http://www.mozilla.org/en-US/plugincheck/
*only the most popular/used Plugins are known by this page
*page will detect only installed, '''''enabled''''' Plugins
'''Install or update Adobe Flash''' 
#'''Using Firefox''', go to the following link and SAVE the download to your desktop so you can find it later. Un-check any items on that page that you do not want to download (i.e., "McAfee Security Scan Plus":
#*http://get.adobe.com/flashplayer
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#To update/install the ActiveX version for IE '''''only''''', repeat the process, '''but use IE to go to the above website'''.
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Upgrade to Windows 10 failed with error 80070714. Please Help!!!

Hi. I hope someone out there can help me!! I have tried numerous times to upgrade my HP Envy 15-K204NA from Windows 8.1 64-bit to Windows 10 Home, but it continues to fail with error code 80070714. I am using Bullguard Premium Protection and have Acronis True Image installed. I have disabled SQL services as suggested by other posts on the internet, but nothing seems to work. When I run the upgrade from a DVD burned from the ISO, it gets to 37% and then fails. Hope you can help. (fingers crossed!!) Chris The Setup Error log file shows: 2015-08-05 16:48:34, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:37, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:49, Error CONX Failed to initialize net class data 800700052015-08-05 16:48:50, Error CONX Failed to get class data from printer 800700572015-08-05 16:49:21, Error CONX Failed to open INF file [tib_mounter.x64.inf] with 0x800700022015-08-05 16:49:21, Error CONX Failed to initialize driver package [tib_mounter.x64.inf]2015-08-05 16:49:21, Error CONX Failed to open INF file [oem46.inf] with 0x800700022015-08-05 16:49:21, Error CONX Failed to initialize driver package [oem46.inf]2015-08-05 16:49:23, Error CONX Failed to open INF file [tib_mounter.x64.inf] with 0x800700022015-08-05 16:49:23, Error CONX Failed to initialize driver package [tib_mounter.x64.inf]2015-08-05 16:49:23, Error CONX Failed to open INF file [oem46.inf] with 0x800700022015-08-05 16:49:23, Error CONX Failed to initialize driver package [oem46.inf]2015-08-05 17:06:14, Error SP RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM at SP_HIVE_LOAD_ALIAS_SYSTEM[gle=0x801f0005]
2015-08-05 17:06:14, Error SP SPMountOfflineHive: Can't mount offline hive: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005[gle=0x801f0005]
2015-08-05 17:06:14, Error SP CEnableTelemetryForImage:oExecute: Cannot load the system hive for the offline OS C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS. Error: 0x801F0005[gle=0x801f0005]
2015-08-05 17:06:14, Error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2015-08-05 17:06:19, Error SP Using current time as Recovery Timestamp.
2015-08-05 17:06:22, Error SP Failed to open WinPE DISM session. Error: 0x80070714[gle=0x0000007a]
2015-08-05 17:06:22, Error SP Operation failed: Process Drivers for Migration. Error: 0x80070714[gle=0x000000b7]
2015-08-05 17:06:22, Error MOUPG MoSetupPlatform: ExecuteCurrentOperations reported failure!
2015-08-05 17:06:22, Error MOUPG MoSetupPlatform: Using action error code: [0x80070714]
2015-08-05 17:06:22, Error MOUPG CDlpActionDriverMigrate::ExecuteRoutine(544): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CDlpTask::ExecuteAction(3243): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CDlpTask::ExecuteActions(3397): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CDlpTask::Execute(1631): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CSetupManager::ExecuteTask(1953): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CSetupManager::ExecuteTask(1916): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CSetupManager::ExecuteInstallMode(736): Result = 0x80070714
2015-08-05 17:06:24, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x80070714
2015-08-05 17:07:09, Error MOUPG CSetupManager::Execute(222): Result = 0x80070714
2015-08-05 17:07:09, Error MOUPG CSetupHost::Execute(370): Result = 0x80070714
2015-08-05 17:07:12, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

Hi Mumbodog and thanks for your reply. I have uninstalled Bullguard and tried the upgrade again, but it failed at the same point. I have also removed Acronis True Image and again it failed!! The log file has fewer lines now, so it has helped, but still no upgrade: 2015-08-06 09:16:30, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-06 09:16:33, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-06 09:17:14, Error CONX Failed to initialize net class data 80070005
2015-08-06 09:17:15, Error CONX Failed to get class data from printer 80070057
2015-08-06 09:23:52, Error SP RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM at SP_HIVE_LOAD_ALIAS_SYSTEM[gle=0x801f0005]
2015-08-06 09:23:52, Error SP SPMountOfflineHive: Can't mount offline hive: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005[gle=0x801f0005]
2015-08-06 09:23:52, Error SP CEnableTelemetryForImage:oExecute: Cannot load the system hive for the offline OS C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS. Error: 0x801F0005[gle=0x801f0005]
2015-08-06 09:23:52, Error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2015-08-06 09:23:56, Error SP Using current time as Recovery Timestamp.
2015-08-06 09:23:59, Error SP Failed to open WinPE DISM session. Error: 0x80070714[gle=0x0000007a]
2015-08-06 09:23:59, Error SP Operation failed: Process Drivers for Migration. Error: 0x80070714[gle=0x000000b7]
2015-08-06 09:23:59, Error MOUPG MoSetupPlatform: ExecuteCurrentOperations reported failure!
2015-08-06 09:23:59, Error MOUPG MoSetupPlatform: Using action error code: [0x80070714]
2015-08-06 09:23:59, Error MOUPG CDlpActionDriverMigrate::ExecuteRoutine(544): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CDlpTask::ExecuteAction(3243): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CDlpTask::ExecuteActions(3397): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CDlpTask::Execute(1631): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CSetupManager::ExecuteTask(1953): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CSetupManager::ExecuteTask(1916): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CSetupManager::ExecuteInstallMode(736): Result = 0x80070714
2015-08-06 09:24:01, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x80070714
2015-08-06 09:24:39, Error MOUPG CSetupManager::Execute(222): Result = 0x80070714
2015-08-06 09:24:39, Error MOUPG CSetupHost::Execute(370): Result = 0x80070714
2015-08-06 09:27:41, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

Tried to upgrade bios but it failed now black screen. What to do now

So as the title says, Itried to upgrade the bios which failed during the process. I have ordered the bios chip from supplyers with newest firmware and still no good. any solutions? This chip they sent is SOIC-8 type of chip. What can I do now as a crisis disk method does not seam to be able to run here.
--a small bit more info-- Not booting at all, even to bios.so can rool back or restore. power on led lights up but thats all..Laptop is c660d-1gd,
Thanks.

What kind of 10.5 disk did you use? If it was a grey system disk from a newer Intel-based Mac, that disk has no 10.5 code that a G4 processor can read and could leave you with what you describe.
I tried booting ........... from the usb 2.0 disk that's attached via a PCI card.
In spite of what Apple says (here), it's hard to find a G-series Mac that likes to boot from a USB device. Do you have one with FireWire connectivity? And some system software may have to load before the USB bus wakes up. You can try it on oneof the logic board 1.1 ports--has a better chance of getting a boot from there than a PCI card. But don't be surprised if it still doesn't boot.
The 10.5 installer requires a minimum 867 mHz processor and may look at something stored in ROM on the computer rather than actually polling the new processor before deciding if it can install. Although you have an upgraded processor, the installer may be reading the original specs off the Machine type code or other parameter that was not affected by the upgrade.

InfoPath Forms Services Form Upgrade timer job continuously failing

Hello all,
We've recently uploaded several InfoPath form templates to our production SharePoint 2010 environment (6 server farm). One of the forms
was still stuck in 'upgrading' (even after it said successful after the upload). So we deleted that form and re -uploaded it successfully.
Since then we've been seeing the following timer job failures every minute. The forms all work but the timer job failures still keep
coming.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Execute method of job definition Microsoft.Office.InfoPath.Server.Administration.FormsUpgradeJobDefinition (ID 6904b095-822d-4158-9572-f6b3fe8d4265)
threw an exception. More information is included below.
Object reference not set to an instance of an object.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We saw this
http://gpkarnik.wordpress.com/ looks hopeful, but we are reluctant to proceed when we read this article
http://blogs.technet.com/b/nishants/archive/2008/10/10/how-to-delete-orphan-configuration-objects-from-sharepoint-farm.aspx
We have done the following:
Reset timer service on all servers (same job just moves to a different server failing)
removed the suspect InfoPath form and re uploaded (no change)
All servers in the farm rebooted (no change)
Questions:
Can we just get rid of the failing InfoPath Forms Services Form Upgrade?
Will a new one get created the next time we upgrade a form?
Thank you,
Jim

Hi Jim,
When you upload an administrator-approved InfoPath form template to SharePoint, SharePoint automatically creates a Solution Package for it as well as a Timer Job. When a solution package is deployed in a farm, it will be restored in 14 hives.
Timer jobs are scheduled for execution, but sometimes it can take a long while before a SharePoint timer job gets executed. The timer job created by SharePoint would have a Title similar to Windows SharePoint Services Solution Deployment for “form-[your_uploaded_form_template_name].wsp”.
The Schedule Type for this timer job would be One-time.
If you want to hurry the execution of administrative timer jobs along, you can use the following stsadm command:
stsadm -o execadmsvcjobs
More information, please refer to the link:
http://www.bizsupportonline.net/blog/2008/12/infopath-form-uploaded-sharepoint-remains-stuck-installing-upgrading-status/
http://johnliu.net/blog/2013/1/8/infopath-form-stuck-on-installing-upgrading-or-deleting.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Purch. & installed upgrade from iLife 2 to iLife 08, but I have questions..

Hi ~
_Purchased & installed upgrade from iLife 2 to iLife 08, but I have questions..._
First I made sure I backed up my 5,500 photos in iPhoto to an external hard drive. (The only downfall to this backing-up process is that I haven't found an easy way to back-up the comments attached to each photo. Any advice on this? Part of the "horror" to losing one's photos is also losing the comments added to them over the years.)
Back to the install... I installed iLife 08 and it installed correctly. I checked to see what version of the applications I have in the dock on my desktop - I figured it would just import existing data (photos, tunes, etc.) into the newer version and replace it in the dock - +it only did this for iDVD+, of course it wasn't that easy for the others.
I can't find the newer version of iPhoto. My iPhoto in the dock still says version 2. iTunes in my dock is version 7 (7.4.2). iMovie is version 3 (3.0.3). But the new Garageband is there in the dock. And of course, iDVD is the newer version '08.
I am most concerned with iPhoto and making sure all the photos AND their comments import correctly into the newer iPhoto 08. I am nervous about this so I want to make sure I do the process correctly.
I also want to make sure my iTunes information imports correctly to the newer version as well.
Thank you.
Sincerely,
Kathy

(The only downfall to this backing-up process is that I haven't found an easy way to back-up the comments attached to each photo. Any advice on this? Part of the "horror" to losing one's photos is also losing the comments added to them over the years.)
If you backed up the iPhoto Library Folder then you got everything - photos, albums, comments etc
I can't find the newer version of iPhoto. My iPhoto in the dock still says version 2. iTunes in my dock is version 7 (7.4.2). iMovie is version 3 (3.0.3). But the new Garageband is there in the dock. And of course, iDVD is the newer version '08.
The Dock is not important. Look in your Applications Folder for iPhoto 08. That's where it should be. The Dock is just a shortcut to that. What version is in your Apps folder?
To upgrade a Library from v2 to iPhoto 08 all you do is open the Library with the newer version.
Regards
TD

Issue installing/upgrading to ITunes 10.6.1.7

Im having an Issue installing/upgrading to iTunes 10.6.1.7 When upgrading it would not istall and tell me to go to Tools>Download manual. I also had an issue with my IPod touch not showing up in iTuens all of a sudden. So figuring the two problems were related I uninstalled iTunes (cleaned my itues folder in my C drive also) with hopes installing it fresh would work and now when I install 10.6.1.7 I get the following in a pop-up window "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
Anyone know what the issue is?

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
Regards

Script returns the same error.
System databases:
1   1   760   -1   10   1048578   0   1   master       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2   0   12768   -1   10   1048642   0   1   mastlog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1   1   1024   -1   10   1048578   0   2   tempdev       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2   0   64   -1   10   1048642   0   2   templog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1   1   288   -1   128   2   0   3   modeldev   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2   0   4464   -1   10   1048642   0   3   modellog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1   1   28936   -1   10   1048578   0   4   MSDBData   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2   0   3352   268435456   10   1048642   0   4   MSDBLog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
       SELECT physical_name
       FROM master.sys.master_files
       WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

My new i-tunes download not installing 'serice apple mobile device failed to start sufficient privleges and windows error 126

my new i-tunes download not installing 'service apple mobile device failed' windows error 126

I have the same problem. I uninstalled the old one because it will not work and now the new one does not either.
Keep getting this picture
Nothing on it works to install itunes and there is no support on the apple site.
Ideas?

Install/upgrade failsafe 3.04 fails

Similar Messages

Maybe you are looking for