Install / Use Organizer from an External Drive

Am I able to install and use the Elements Organizer on an external hard drive? I don't want to keep all my images on my laptop HD.
Am I able to put the images on the ext. HDD and then 'point' Organizer at them ~ OR ~ am I able to simply put the Elements Organizer
Application on the ext. HDD and load images into it and then be able to access it from my laptop?
I'm not able to locate a Discussion Group specifically for Elements Organizer. (?)

Hi,
You've posted on the right forum
You should install PSE on the laptop hard disk and may have all your images on the external hard disk or local hard disk. Now in Organizer, you may import media from local/external hard disk. Organizer only keeps only references (image path, to be precise) only and hence your images may reside on external hard disk.
Thanks
Andaleeb

Similar Messages

How can i use Itunes from an external drive

How can I install iTunes on to an external drive an use as my master librarian for music and movies, it must pretty simple, thanks guys!

Hi,
Read this http://support.apple.com/kb/ht1449
Jim

Using photos from a external drive in iphoto

I have 300+ gigs of pictures on an external drive (attached to my Airport Extreme) and I want to use iphoto to edit and sort these pics without moving them to my Macbook.
Is this possible?
Thanks,
Scott

Scott:
Yes it is. You can do it one of two ways:
1 - create a new library on the external HD and import the folders into the library. As you import each folder and confirm that the files are safely copied into iPhoto, you can delete the original folder. Be sure to set up the Events preferences as seen here. This will insure that each folder will be imported as a single event and maintain your folder organization. This is the preferable way. The library would not be available when the external HD is not mounted.
2 - create an alias based library (don't check the checkbox to copy the files on import) on your boot drive, set the Event preferences as before and import the folders from the external HD. This will put alias files in the originals folder of the library instead of copying the actual files. There are caveats to this method. If the HD is not mounted only the thumbnails and edited files will be viewable. You cannot have any movie files in the library as iPhoto insists on verifying their link before you can use the library. Not like the stills. Any photo you delete from the library will not be deleted from the source files on the external HD. That must be done via the Finder. If, while using the library, the HD gets dismounted the library's database file could be damaged and you'd lose all of your organizational effort. That could be averted by following the tip at the end of my signature. (It applies to normal libraries also). You cannot move or rename any of the source files once they've been added into the library. That's a big NO-NO.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How can i use projects from an external drive in iMovie 13?

In iMovie 11´you were able via a button to edit movies from an external hard drive without needing to install those in your computer´s internal hard drive, but in iMovie 13´ you are not able to do that anymore.
I love iMovie, because it simplicity to create and make movies and i love they added better performance for green/blue screening, but i found a problem, i have a hard drive of only 128 GB, and with my content the clips i have don´t fit in the internal hard drive so i can´t install those clips, please do something in iLife 13´and even in iWork 13´there aren´t all those options anymore that let you do your work, some people think apple is bad for work, but i always have been telling them that all Microsoft features are in Mac too but with simplicity but in the new lineup they aren´t, i love apple, i haven´t got any device that isn´t from apple even my mobiles.
Please do something! ;(
Message was edited by: HDBusiness

Hi,
Read this http://support.apple.com/kb/ht1449
Jim

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

I want to install mountain Lion on an external drive without uninstalling Maverick from my computer

When I want to get mountain Lion, apple store telles me that I have Maverick installed. How can I charge the M Lion version to install on an external drive?

You would need to download a copy from the Mac App Store or already have a copy of the installer. Then you can make a bootable USB drive using DiskMaker X (http://liondiskmaker.com). Once you created the USB disk, you can boot from that and install Mt Lion on the external drive.

Running SL from an external drive on Lion-installed iMac

I recently installed Lion on my iMac with the intention of having Snow Leopard bootable from an external drive when I need to run all my PPC apps etc. Having formatted an external drive, I put in the Mac OSX SL DVD into the Mac to install it on to the external drive, but before I could do this, a message appears:
" You can't use this version of the application Install Mac OS X with this version of Mac OS X.
You have install (sic) Mac OSX 23.1"
Can anyone interpret this message for me please?
Thanks

The SL DVD. If you actually tried it, you'd have found that the blank drive doesn't appear because it doesn't yet contain Mac OS X.
(59758)

I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

mcbsousa wrote:
hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
Sending by Dropbox where, To who, to what computer? As your does not start up.
You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

Trouble with installing 10.5 from an external firewire drive

I have a family pack of 10.5 and installed it just fine on my macbook. But, I'm having trouble getting my imac DVD player to read the DVD. It just spins and spits it out, and spins and spits it out. The imac is not covered under applecare so spending money to get the DVD drive fixed (which I barely use) is not something I want to do right now.
Anyway, I followed instructions on a this website to install 10.5 from an external firewire drive. (http://iuseapple.com/blog/apple-how-to/advanced-os-x/2007/10/29/how-to-install-l eopard-from-external-firewire-hard-drive/)
But I get stuck and am not able to actually get my imac to boot from the installer. Basically, I am able to use disk utility to create a copy of the disk image on my macbook. That resulting file ends in ".cdr" and it mounts when I double click it.
And I partitioned my firewire hard drive without problems.
I think I'm messing up when it comes to doing the restore. If I try to drag the .dmg mounted file in to the "source" it doesn't work (is greyed out). If I try to drag the mounted .dmg there than it works, but I get an error when I click "restore" (something about scans and images not being found). I tried physically copying the .dmg file onto the partition, but then when I plugged the HD into my imac, I wasn't able to get the imac to boot from the installer.
What am I doing wrong? If someone could walk me through these last steps I'd appreciate it!

Okay I finally got around to creating the bootable disk image of 10.5 using Carbon Copy Cloner. Still my iMac is not booting from the firewire drive!
Here's a recap of everything I've tried. I'm at a complete loss now!
- I partitioned the HD into 2 partitions-- a 10gig one for the 10.5 install, the then the rest for Time Machine. I make the partition in Disk Utility on my MacBook.
- I've partitioned the drive a few times-- always partitioning it in APM format (b/c it needs to boot my non-intel iMac).
- I've created the disk image using "restore" in disk utility. I've again tried this a few times.
- I am able to boot my MacBook from the disk image I create! So I know the FW drive is able to be used to boot from!
- Here's what I've tried in terms of getting the iMac to boot from the FW drive. It always just boots to my internal drive instead. Sometimes I briefly see a folder and question mark. I've tried all 3 FW ports. I've selected the install partition at start up in preferences. I've also held down the option key at start up (only my internal drive shows) and I've held down command-option-shift-delete and again I get the question mark and it boots to my internal drive.
- And I installed Carbon Copy Cloner and made the disk image that way on my macbook. Still, I tried everything and the iMac is not able to boot from the firewire drive!
Since my DVD drive is broken, this is the only way for me to install 10.5! Help!

I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?

I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?
Other info is available:
Superdrive MFG date: Sept 2009
Model: DVR-118LBK DVD-R/RW Writer Unit
My Macbook is: Mid-2010, running Mavericks
Thanks in advance, God bless!

That's a nice Pioneer DVD±RW drive - and an upgraded replacement for the original optical drive that shipped with that G5. For a finished look, you'd want to install it in an external enclosure for 5.25" IDE/ATAPI drives that converts it to USB connectivity. Because SATA optical drives have replaced ATAPI drives in recent years, the selection is getting more limited for a new enclosure, although used ones can undoubtedly be found at ebay. Here's an example of one, although it only features USB connectivity. You can also find enclosures that have both FireWire and USB connectivity, which for Mac users is beneficial. Booting the computer (if needed) by a FireWire-connected device is generally more reliable than USB booting. If this isn't important to you, then a USB-only enclosure would be adequate. The enclosure will have directions, but essentially all you need to do is plug in the power cable and data ribbon cable and then secure the drive to the bottom plate of the enclosure with the included machine screws.

Can i use applications from an external hard drive?

Can i use applications from an external hard drive?

Photoshop itself needs to reside inside of it's Applications folder so that it has access to it's Libraries and plugins. So if you are going to attempt to store and run it from an external drive you need to copy the whole Application folder or install it directly to the external drive. Even still I am not 100% positive it will work as I know it still needs to access your Library/Application Support for additional files and licensing.
Why do you want to run Photoshop from an external drive?
George

I think the DVD player reader on my Mac is going bad. Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive?

I think the DVD player reader on my Mac is going bad. Until I get it fixed Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive? It's ILife 11 if that makes a difference. Finder won't let me see the files to copy. I know - dumb question.
Thanks.
Bob

Adding an SSD is not a simple endeavour like adding additional memory or adding another hard drive to a Mac Pro. That's probably why the option is only offered as an option at the time of purchase. Even if your Apple store was willing to install the necessary parts you will probably be paying for 1-2 hours of labor plus the cost of purchasing the necessary service parts (SSD, bracket, cables, etc) which I suspect will make the upgrade cost much higher than what it costs to add the SSD option when purchasing a new system.
I use my system for business and need it to work reliably. Even though I'm fairly handy with tools I would not be willing to risk damaging my system and voiding my warranty by opening my system and removing the logic board and several other parts in order to squeeze in an SSD option and attach the appropriate cables and brackets. I'm also not prepared to deal with the hassles of explaining why my system has unauthorized parts installed in the event I experience issues and need to make use of my Apple warranty. My time is valuable, so I would probably investigate external storage options, or if I needed the speed of an SSD, I would consider selling my existing system and then purchase a new system configured with an SSD.
If you haven't already done so I suggest doing a search on 'iMac SSD installation' to see what's involved. It might help you understand why the SSD option is not offered post purchase.

Can I transfer data from one external drive to another using my MacAir as a platform?

I am trying to transfer about 94 Gigs of data from one external drive (Touro) to another (Seagate) using my Mac Air which only has about 14 Gigs of available space. How best can I accomplish this operation?

Niel - I know that I must be a real dunce on this. I tried opening the additional window on finder and then dragging and dropping from the Touro drive to the other open finder window for the Seagate drive. Again, it bounced back. What is NTFS? And how do I find if either or both of the drives are formatted in that manner?
Again, thanks for you help on this.
JC
PS I just got the info on the Seagate that it is Windows NTFS formatted. What do I do now? Is Paragon something I can download off the Internet? Why, since I formatted the Seagate to run on my Mac Air would there still be a problem? The packaging on the Seagate says it is compatible with Mac OS systems. jc

Is it possilbe to install Windows 7 in an external drive using Boot Camp

Hi,
Is it possilbe to install Windows 7 in an external drive using Boot Camp? If yes, can you someone show me or direct me where I can find more info?
Thanks a lot

You're welcome anytime.
Microsoft doesn't make it easy sometimes
As for the harddisk it surely is possible.
iFixit http://www.ifixit.com/Browse/MacBook jas repair manuals and/or MacSales http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/SATA/DIY/ with videos on how-to.
Stefan

Installing PhotoShop CS from an External Hard Drive to PC Vista

My Dell laptop crashed about a year ago, and I was able to have the hard drive backed up to an external. I now need my PhotoShop CS which is on the external hard drive. I need to know how to install PhotoShop, and others in the creative suite, from the external drive. I am having a problem figuring out which files need to be installed first, i.e. .exe and .dll files.
The hard drive is an iMicro 3.5" SATA and IDE HDD
I am currently running Windows Vista, Gateway Notebook
**I can not find the original Creative Suite cds; I think they may have been "accidentally" thrown away by someone other than myself. Long story.
Any help is greatly appreciated!
Thanks!

>I can not find the original Creative Suite cds; I think they may have
>been "accidentally" thrown away by someone other than myself. Long
>story.
Uah... Who would be so obviously plain stupid? I mean, one can throw away the boxes, manuals and gift wrap, but by all means keep the media in a safe place. *yikes* Anyway, as the others said - without the original install CDs that is a no go and unless the missing disc turns up magically, an upgrade to CS4 is the only way to get going (and that's assuming you know your serials and have registered them).
Mylenium

Install / Use Organizer from an External Drive

Similar Messages

Maybe you are looking for