Installation Domain Name

I am receiving the error "installation can not the determine the domain name"... I read in the config/admin guide p.174 that you must have Domain admin rights..
Do need full access to the Domain to install and practice with SUN DS? -or- Just Local admin rights to the server?
Ty
[email protected]

This install is on NT4 box.

Similar Messages

Oracle 9i Application server installation problem(MSG:Fully qualified domain name)

I have installed Oracle 9i database.Now downloaded application server 9iAs,when i am installing I have got this error message(J2ee and web cache)
Message begin
Installation has detected that a fully qualified hostname has not been specified for this host.Oracle 9i application server requires a default domain name to be specified for each host where it is installed .Please consult your OS instructions for details on assigning a default domain name If u are not using DNS server then the file d:\windows\system32\drivers\etc hostsmust also include a line of a form
<IP_ADDRESS><FULLY_QUALIFIED_HOST_NAME><ALIESES>
Message End
Could some one suggest the procedure to follow.
Pl ,mailme to [email protected]
I appriciate your help
Tahnq
Ravi

Search this forum for answers and discussions.
Basically, your machine will need a "fully qualified hostname" e.g. myhostname.mydomain.com, only myhostname is not enough.
Also, AS does not allow the IP to change after install e.g. no DHCP (dynamically allocated IP) allowed!
Hth,
Fredrik

TREX Patch Installation ERROR - DNS Domain Name

Dear all,
I have been facing a problem with a TREX Installation and I would like to request your help.
After successfully installing a portal (EP 7) and a TREX instance (7.00), I encountered the following error
while trying to install the TREX patch.
The Error that pops-up is the following:
"unknown message ID (osmod.hosts.getHostByAddress2) with parameter(s): -84.-230.-250.114".
This error appears when the installation reaches the 'DNS Domain Name' step.
The installation cannot procceed without resolving this issue.
I have been trying to install patch 49, which I have successfully installed in other TREX instances so there
should be no error with the binaries.
Has anyone come across a similar situation?
I would appreciate your input on the matter
Thanks in advance,
Kontogianni Eleni
Edited by: Eleni Kontoyanni on May 20, 2011 2:36 PM

Dear Eleni,
The issues that I have encountered where unrelated, otherwise I would have mentioned them for you as a clue
But what I was trying to say is that although sometimes prerequisites look OK there can be a bug or exception in the SAP coding that might cause this. Examples of these non-related issues are:
- https://service.sap.com/sap/support/notes/1114042
and
- when using the KM Portal Drive with a description that is "to long" connection is suddenly not possible.
I therefore advise you to open an OSS message @ SAP Support.
Cheers,
Benjamin

Installation of Sun Directory Server on Home PC - Domain name problem

Hi!
I would like to install SunONE directory server on my home PC but, I am unable to do so because one of the installation steps requires the fully qualified machine name. This is of format <hostname>.<domainname>. My home PC doesnot belong to any domain. Is there any solution to this problem? Is there a default domain name that I can use?
Thanks in advance!

Hi,
This post talks about that problem:
http://forum.java.sun.com/thread.jspa?threadID=5111917&tstart=0
Rob.

Changing domain name after 12i installation

Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.

I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1

Problem with NFSv4 Domain name

Hi,
I am creating zones for the first time.
I am having problem with the NFSv4 domain name prompt.
I followed the instructions described in
http://opensolaris.org/os/community/zones/faq/#cfg_sysidcfg
After the installation of the zone, on zonepath/root/etc, I created a sysidcfg file and did
touch *.*NFS4inst_state.domain
Booted the zone and logged in to the zone console.
The sysidcfg worked as expected but the NFSv4 prompt didn't go away:
─ NFSv4 Domain Name ────────────────────────────────────────────────────────────
NFS version 4 uses a domain name that is automatically derived from the
system's naming services. The derived domain name is sufficient for most
configurations. In a few cases, mounts that cross domain boundaries might
cause files to appear to be owned by "nobody" due to the lack of a common
domain name.
The current NFSv4 default domain is: "xx.xx.xx"
      NFSv4 Domain Configuration
      ──────────────────────────────────────────────
      [X] Use the NFSv4 domain derived by the system
      [ ] Specify a different NFSv4 domain
────────────────────────────────────────────────────────────────────────────────
    F2_Continue    F6_HelpWhat is missing?
I am running
$ more /etc/release
                       Solaris 10 11/06 s10s_u3wos_10 SPARC
           Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 14 November 2006
$Thanks in advance

Hi
Can you please confirm that there is no “Create A records” option under “More Actions” ?

BI 7.0 Java Add-in without fully qualified domain name

Hi
I have just installed the Java Add-in for BI 7.0, and now I am trying to set up BEx to work. I have run the template installer, but there seems to be an issue with server names vs. fully qualified domain names. The server name is currently in the format "server.domain", but I suspect that it should/must be "server.domain.com".
Is it possible to get full functionality without using fully qualified domain names (FQDN)? Is so, how can I acheive this?
Regards,
Thomas
Edited by: Thomas Kjelsrud on Apr 23, 2008 8:39 PM

This issue is no longer relevant for me. I still wish to find the solution tough, for future reference.
Tegards,
Thomas

How to change Host and domain name on APS 10g R2

Hi,
I have installed oracle application server 10g rel.2 I want to change the host and domain of the system, what should I do, Plz help.
Thanks and Regards.
Khawar

Hi,
Thanks to all of you for reply, I started without reading any manual to modify host and domain name and after expending several hours finally decided to reinstall APS, with new installation forms runing ok but report server having problem if you see the status of report server in enterprise manager it shows green mark(if you want to stop it via EM it will not), if you check with Report Queue manager it says no report server with the given name,
if you check the report with GETSERVERINFO via browser it says
"REP-51002 Bind to report server AAAAA failed. some one have idea."
some one plz explain me how can I fix it.
Thanks and Regards.
Khawar

Question about RAC 10g on server running AIX and domain name changes

We have several 10g clusters running on IBM p-Series AIX servers, and our company is changing the domain name for our network. I am concerned that if we do not change the domain names in the TNSNAMES.ora file and also the /etc/hosts file on each server, the cluster will no longer function. We are using CRS (version 10.2.0.3) and ASM within each cluster.
Does anyone know where I can find information about changing the domain name that was set up as part of the CRS and database installs for RAC? Does anyone have experience doing this, and would be willing to share a few insights? Thanks in advance for any advice you can give!

You may be able to use the VIPCA utility for RAC to change or modify the public and private settings for your domain names on AIX. Also, the Oracle 10g DBCA "Database Configuration Assistant" should be of use to change your settings for your RAC environment.
Also, see here for a good IBM Redbook that covers Oracle 10g RAC on AIX platforms:
http://www.redbooks.ibm.com/redbooks/pdfs/sg247541.pdf
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/
Regards,
Ben Prusinski
http://oracle-magician.blogspot.com/

Using a Domain name with embedded PL/SQL Gateway

Hello all
I wish to link domain name to an application
e.g. www.mydomain.com goes to application 100
or www.ano.mydomain.com goes to application 135
I have successfully done this in the past using HTTP server.
My new installation does not used HTTP server ... I have only configuration Embedded PL/SQL gateway
Can I route using embedded PL/SQL gateway a URL to an application?
Thanks
Pete

PS ... I am using APEX 3.1 with 11g

Speed internet browsing via a local domain name server

Is it possible with leopard to create a local DNS to speed up browsing on the internet on Leopard? If so, how do you go about it?

Hi Uday,
I have eventually managed to install minisap - I installed MaxDB to answer your question.
I unchecked a checkbox that was asking for a FQDN and then the domain name server is no longer mandatory.
However, when trying to run webdynpro applications I now get a shortdump that shows a CX_FQDN exception. It says:
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_FQDN', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Die URL enthält keine vollständige Domainangabe (john-pc statt
john-pc.).
I don't understand the German, but john-pc is my computer name and I was prompted during the installation to replace localhost in my host file with this.
The url of the webdynpro application includes this, for example:
http://john-pc:8000/sap/bc/webdynpro/sap/z_hello_world
Would you know how I now resolve this?
Many thanks,
John
Edited by: John Watt on Mar 15, 2009 7:01 AM

SAP NetWeaver DNS Domain Name System for SAP?

Hi all,
I need to install SAP Netweaver 7:01 SR1 ABAP Trial Version.
I use Microsoft Windows XP.
During the installation process asks the DNS Domain Name System for SAP.
What should I put in this field?
Following is the result of ipconfig:
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix....:
IP Address.....................................: 10.10.0.10
Subnet Mask..................................: 255.255.255.0
Default Gateway...........................:
The name of my machine is solaris.
In the host file put the following:
10.10.0.10 solaris
I very much appreciate if someone can help me.
Viviane

Hi Viviane,
Please check this thread:
Error:Reverse lookup of address failed:(NW7.01ABAPTrailVersionInstallation)
http://en.wikipedia.org/wiki/Domain_name_system
Hope it helps.
Regards,
Arun

Changing mail domain name OCS 10.1.2

I can't receive mail in OCS and think I need to alter my domain name so it will work on this test box and not interfere with the mail to our main campus domain mailserver.
I downloaded the 10.1.2 Linux software and installed for a trial demo against other groupware here. I put in the wrong mail domain and think I need to change it. I have found the blurb in the documentation where it tells how to do it, but I'm not sure what userid to use to let me administer e-mail. This is the doc that points me to OCS Webmail from the OCS Mail Administrator's Guide, chapter 2...
http://download-east.oracle.com/docs/cd/B25553_01/mail.1012/b25499/objects.htm#BABEAGIJ
This is the blurb that it points to about OCS Webmail
http://download-east.oracle.com/docs/cd/B25553_01/mail.1012/b25499/intro.htm#BHCHCGJJ
The two lines that give the URL don't seem to work in my installation. Is it an OCS problem or is my installation screwed up? I don't see how it could be.
http://host_name:port/pls/portal
http://host_name:port/um
My Web Cache Administrator Port is 9400 according to portlist.ini file. Going to http://host_name:9400 works fine. When I try to add /pls/portal or /um, it bombs.
I found that I could use ias_admin to login to OEM AS Control (port 1810) and work my way through the application to the component list and when I click on the Administer button next to Mail, I have no idea what userid to use to administer it.
So I either need to know what userid works to administer Mail, or I need to know how to run Webmail and then what userid to use for that as well.
Thank you to anybody who can help.
Chris Behrens
Clemson University
[email protected]

Do changing host name effect in google PR update ?

/etc/hosts Private Host Name Fully Qualified Domain Name does it matter?

During installation of 11gR1 on Windows 2003 the examples in the installation guide show adding the Private IP and host name to /etc/hosts
However they only add the short name, racnode1, not Fully qualified Domain Name (FQDN), racnode1.mycompany.com
e.g.
10.0.0.1 racnode1
10.0.0.2 racnode2
Later when installing the Clusterware it then expects to see the FQDN, racnode1.mycompany.com, of course you can modify this and remove the domain name and continue. OR go back and add the FQDN in /etc/hosts
e.g.
10.0.0.1 racnode1 racnode1.mycompany.com
10.0.0.2 racnode2 racnode2.mycompany.com
What is the best practice? Currently my company is just dropping the FQDN from the name during the install, my instinct is instead to add the FQDN to the /etc/host in the first place.
Does anyone have a recommendation or experience with either situation?
Will (using/ or not using) the FQDN cause me issues in the future?

If it's a problem, the assistent will tell you :-)
I don't think it's a problem.
Please mind that the first entry will be the name of the ip address, if it's not in DNS and a utility tries to get the name. (that's the reason 127.0.0.1 resolves to localhost.localdomain, it's the first entry in /etc/hosts)

Fully Qualified Domain Name for Portal Server on Win XP

I'm trying to install the Portal Server (java_es_05Q1_portal-windows-x86) to a Win XP workstation to test my Kosmos portlets (http://labs.jboss.com/projects/kosmos).
I get the following error msg after selecting the features:
System doesn't have Fully Qualified Domain Name.
Setup Fully Qualified Domain Name and then continue installation.
What exactly am I supposed to configure under Win XP? (No /etc/hosts?!)
Thanks.
Aron

Hi!
Probably you could enter the hostname in c:/Windows/system32/drivers/etc/hosts
(maybe the directory is called WINNT, I have no XP here)
hth
Chris

Installation Domain Name

Similar Messages

Maybe you are looking for