Installation of Archboot: cannot resolve "kernel26-lts"

Hi,
I'm trying to install the latest Archboot. My existing host is using kernel 3.1.9-2 but Archboot seems to need kernel26. When I try to install it with pacman, it says:
warning: cannot resolve "kernel26-lts>=2.6.32.46-1", a dependency of "archboot"
warning: cannot resolve "kerenl26-lts>=2.6.32", a dependency of "noveau-drm-lts"
warning: cannot resolve "kernel26-lts<2.6.33", a dependency of "nouveau-drm-lts"
Do I really need to install kernel26 items? I'm hesitant because I really like the nice minimal system I have at the moment.
tia!

kernel26-lts has been renamed to linux-lts when Linux 3.0 became LTS, so your ArchBoot must be out of date...
In fact "pacman -Si archboot | grep kernel" returns nothing.
However:
$ pacman -Si nouveau-drm-lts | grep kernel
Depends On : kernel26-lts>=2.6.32 kernel26-lts<2.6.33
This package is orphan, which must be the reason why it's not up to date.
I suppose you could use abs to rebuild nouveau-drm-lts against kernel 3.0... Maybe .

Similar Messages

Cannot install virtualbox "Cannot resolve Kernel26 2.6.29"

Hello,
I'm trying to get virtualbox running but it doesn't want to install.
This is what I get:
[root@Baldr werner]# pacman -S virtualbox
warning: provider package was selected (virtualbox-ose provides virtualbox)
resolving dependencies...
error: cannot resolve "kernel26<2.6.29", a dependency of "virtualbox-modules"
error: failed to prepare transaction (could not satisfy dependencies)
:: virtualbox-modules: requires kernel26<2.6.29
Upgraded everything to the latest version with pacman -Syu so that couldn't be the problem.
uname says i'm running kernel 2.6.29-ARCH so I really don't know what to do..
Someone who can help me ?
Last edited by WernerL (2009-04-14 18:49:29)

kfgz wrote:Or install virtualbox_bin from http://repo.archlinux.fr
I tried to install the version in this repository but pacman can't install it? :S
[root@Baldr Downloads]# pacman -U virtualbox_bin-2.1.4-2-i686.pkg.tar.bz2
loading package data...
error: error while reading package virtualbox_bin-2.1.4-2-i686.pkg.tar.bz2: Truncated input file (need to skip 1522590 bytes)
error: 'virtualbox_bin-2.1.4-2-i686.pkg.tar.bz2': libarchive error
Ark opens the package fine though...

Exchange 2013 SP1 Installation Errors I Cannot Resolve

Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -

Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Virtualbox-modules cannot resolve dependecies

resolving dependencies...
error: cannot resolve "kernel26<2.6.26", a dependency of "virtualbox-modules"
error: failed to prepare transaction (could not satisfy dependencies)
:: virtualbox-modules: requires kernel26<2.6.26

this is because the vm* pkg theoretically has o support for the newer kernel yet
o either rebuild it and see if it works against the new one
find a patch for the new kernel and rebuild
or if you don't use it currently you could force the upgrade
pacman -Syud (d to ignore the dependency)
this way you can continue to test the new pkgs
you may wanna check the bug tracker a more permanent fix(patch) may have been submitted there
if there exists a bug report

Installation issue on Ubuntu 10.04 LTS

Hello,
Machine info : 2 GB RAM 80+160 GB PATA Hard disk P4 32 bit architecture
OS : Fresh installation of Ubuntu 10.04 LTS
Oracle: 11gR2
With above details i am installaing Oracle 11gR2 on this machine. I have completed all the pre-installation task and i ignored all when it prompts for required packages :
make-3.80
binutils-2.15.92.0.2
gcc-3.4.6
libaio-0.3.105
glibc-2.3.4-2.41
compat-libstdc++-33-3.2.3
elfutils-libelf-devel-0.97
glibc-common-2.3.4
glibc-devel-2.3.4
gcc++-3.4.6
libaio-devel-0.3.105
libgcc-3.4.6
libstdc++-3.4.6
libstdc++-devel-3.4.6
sysstat-5.0.5
unixODBC-2.2.11
unixODBC-devel-2.2.11
pdksh-5.2.14
I ignored all these required packages, because when i check in system; ubuntu has installed its higher numberred versions. Installation worked upto 69% and now it is showing :
Error in invoking target 'idguodbc' of makefile
'/app/oracle/product/11.2.0/db_1/rdbms/ins-rdbms.mk'. See
'/app/oracle/oraInventory/logs/installAction2010-06-01_01_01-03-01PM.log' for details.
And here is contents of '/app/oracle/oraInventory/logs/installAction2010-06-01_01_01-03-01PM.log' :
INFO: Linking dg4odbc Executables
INFO: Linking dg4odbc Executables
INFO: The output of this make operation is also available at: '/app/oracle/product/11.2.0/db_1/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO:
INFO: - Linking dg4odbc agent
INFO: rm -f /app/oracle/product/11.2.0/db_1/rdbms/lib/dg4odbc
INFO: gcc -o /app/oracle/product/11.2.0/db_1/rdbms/lib/dg4odbc -m32 -L/app/oracle/product/11.2.0/db_1/rdbms/lib/ -L/app/oracle/product/11.2.0/db_1/lib/ -L/app/oracle/product/11.2.0/db_1/lib/stubs/ -L/app/oracle/product/11.2.0/db_1/lib/ -lirc -lipgo    /app/oracle/product/11.2.0/db_1/hs/lib/dg4odbc.o            /app/oracle/product/11.2.0/db_1/rdbms/lib/homts.o            -lhgosh11 -lhggcon11 -lhgosh11 -lagtsh -lclntsh   `cat /app/oracle/product/11.2.0/db_1/lib/sysliblist` -Wl,-rpath,/app/oracle/product/11.2.0/db_1/lib -lm    `c
INFO: at /app/oracle/product/11.2.0/db_1/lib/sysliblist` -ldl -lm   -L/app/oracle/product/11.2.0/db_1/lib
INFO: /app/oracle/product/11.2.0/db_1/lib//libagtsh.so: undefined reference to `nnfyboot'
collect2: ld returned 1 exit status
INFO: make: *** [/app/oracle/product/11.2.0/db_1/rdbms/lib/dg4odbc] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'idg4odbc' of makefile '/app/oracle/product/11.2.0/db_1/rdbms/lib/ins_rdbms.mk'. See '/app/oracle/oraInventory/logs/installActions2010-06-01_01-03-01PM.log' for details.
Exception Severity: 1And few lines of /app/oracle/product/11.2.0/db_1/install/make.log
rm -f /app/oracle/product/11.2.0/db_1/rdbms/lib/dg4odbc
gcc -o /app/oracle/product/11.2.0/db_1/rdbms/lib/dg4odbc -m32 -L/app/oracle/product/11.2.0/db_1/rdbms/lib/ -L/app/oracle/product/11.2.0/db_1/lib/ -L/app/oracle/product/11.2.0/db_1/lib/stubs/ -L/app/oracle/product/11.2.0/db_1/lib/ -lirc -lipgo    /app/oracle/product/11.2.0/db_1/hs/lib/dg4odbc.o            /app/oracle/product/11.2.0/db_1/rdbms/lib/homts.o            -lhgosh11 -lhggcon11 -lhgosh11 -lagtsh -lclntsh   `cat /app/oracle/product/11.2.0/db_1/lib/sysliblist` -Wl,-rpath,/app/oracle/product/11.2.0/db_1/lib -lm    `cat /app/oracle/product/11.2.0/db_1/lib/sysliblist` -ldl -lm   -L/app/oracle/product/11.2.0/db_1/lib
/app/oracle/product/11.2.0/db_1/lib//libagtsh.so: undefined reference to `nnfyboot'
collect2: ld returned 1 exit status
make: *** [/app/oracle/product/11.2.0/db_1/rdbms/lib/dg4odbc] Error 1I think issue with make command / version. I have checked and it is showing :
girish@girish-desktop:~$ make -v
GNU Make 3.81
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
This program built for i486-pc-linux-gnu
girish@girish-desktop:~$ Please help me to resolve the issue.
Regards
Girish Sharma

Girish Sharma wrote:
INFO: /app/oracle/product/11.2.0/db_1/lib//libagtsh.so: undefined reference to `nnfyboot'
collect2: ld returned 1 exit statusThis error could be due to using newer versions of software. Backwards compatibility is not always guaranteed.
The libagtsh.so refers to an external procedure/function call nfyboot - this should be resolved by the dynamic link loader. It should load the shared object (.so or DLL in Windows-speak) that contains the implementation of that proc. Only, this fails and it cannot resolve the external call made by libagtsh.so to this proc.
To troubleshoot this you can use the ldd command to see what the external references of a .so is and whether these can be resolved. E.g. Oracle XE on Ubuntu.
oracle:/usr/lib/oracle/xe> ldd $ORACLE_HOME/lib/libagtsh.so
        linux-gate.so.1 => (0xb7ff2000)
        libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb7c71000)
        libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb7c4b000)
        libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 (0xb7c31000)
        libnsl.so.1 => /lib/tls/i686/cmov/libnsl.so.1 (0xb7c18000)
        libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7ab5000)
        /lib/ld-linux.so.2 (0xb7ff3000)There could be a missing .so - it could use a newer .so that no longer implements that proc call. This could require installing using backwards compatibility packages via apt-get.
So it will require some troubleshooting on your part.
Just keep in mind though that this is (as yet) an uncertified distro - only XE installs out-of-the-box on it. Canonical wants to change this and become a certified o/s for Oracle I believe... which would be great as it is one of the better Debian distros IMO.

Cannot resolve "python", a dependency of "python-distutils-extra"

Attempting to perform a full system upgrade on 32 bit archbang 2012.05, and when I `pacman -Syu`: this occurs
Anyone know how to deal with this issue?
$ sudo pacmatic -Syu
Recent ML chatter:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
:: Replace libusb with core/libusbx? [Y/n] y
:: Replace procps with core/procps-ng? [Y/n] y
:: Replace udev with core/systemd-tools? [Y/n] y
resolving dependencies...
warning: cannot resolve "python", a dependency of "python-distutils-extra"
:: The following package cannot be upgraded due to unresolvable dependencies:
python-distutils-extra
Do you want to skip the above package for this upgrade? [y/N] y
warning: dependency cycle detected:
warning: util-linux will be installed before its systemd-tools dependency
looking for inter-conflicts...
Targets (71): acl-2.2.51-2 arandr-0.1.6-1 attr-2.4.46-2 automake-1.12.1-1
bash-4.2.029-1 binutils-2.22-7 bzip2-1.0.6-4 coreutils-8.17-1
cryptsetup-1.4.2-2 curl-7.26.0-1 db-5.3.21-1 deadbeef-0.5.4-2
device-mapper-2.02.95-6 dnsutils-9.9.1-1 e2fsprogs-1.42.3-1
filesystem-2012.2-5 gcc-4.7.0-6 gcc-libs-4.7.0-6
glib2-2.32.3-1 gmp-5.0.5-1 gpm-1.20.6-8 hwids-20120512-1
initscripts-2012.05.1-3 isl-0.09-2 kmod-8-2 krb5-1.10.1-3
libcap-2.22-3 libevent-2.0.19-1 libldap-2.4.31-2 libnl-3.2.9-1
libpipeline-1.2.1-1 libssh2-1.4.2-1 libusb-1.0.9-1 [removal]
libusb-compat-0.1.4-1 libusbx-1.0.11-2 linux-3.3.7-1
linux-firmware-20120227-2 lvm2-2.02.95-6 lxappearance-0.5.2-1
lxinput-0.3.2-2 lxterminal-0.1.11-2 man-pages-3.41-1
mdadm-3.2.5-2 menu-cache-0.3.3-1 mkinitcpio-0.9.1-1
mkinitcpio-busybox-1.20.1-1 mpfr-3.1.0.p10-1 oblogout-0.2-11
openbox-3.5.0-7 openssl-1.0.1.c-1 pam-1.1.5-3 pciutils-3.1.9-2
perl-5.16.0-2 pinentry-0.8.1-4 procps-3.2.8-5 [removal]
procps-ng-3.3.3-1 python2-distutils-extra-2.32-1
run-parts-4.3.1-1 shotwell-0.12.3-1 sudo-1.8.5.p2-1
sysfsutils-2.1.0-8 syslog-ng-3.3.5-1 systemd-tools-184-2
udev-182-1 [removal] usbutils-005-2 util-linux-2.21.2-1
virtualbox-archlinux-additions-4.1.16-1
virtualbox-archlinux-modules-4.1.16-1 volumeicon-0.4.6-4
xfsprogs-3.1.8-2 zlib-1.2.7-1
Total Installed Size: 390.46 MiB
Net Upgrade Size: 3.42 MiB
Proceed with installation? [Y/n] y
(68/68) checking package integrity [----------------------] 100%
(68/68) loading package files [----------------------] 100%
(68/68) checking for file conflicts [----------------------] 100%
error: failed to commit transaction (conflicting files)
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/__init__.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/__init__.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/auto.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/auto.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/__init__.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/__init__.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_extra.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_extra.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_help.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_help.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_i18n.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_i18n.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_icons.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_icons.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/clean_i18n.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/clean_i18n.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/pylint.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/pylint.pyc exists in filesystem
Errors occurred, no packages were upgraded.
No pacnew files to update.

I do not thing archbang is officially archlinux distributions (you are on an archlinux forum). This error does not appear on the current archlinux distribution. My guess is that here is a confusion between python / python2 / python3. Just run pacman -Si to know (or the equivalent of pacman for archbang).
I would suggest you to use the official archlinux instead of this fork, archlinux has much more support and users and I do not quite understand what archbang has to offer: Their homepage said that it is archlinux combined with openbox, but you can just do
pacman -S openbox
on arch; it does not seems to justify a fork (but please correct me if I am wrong).
Last edited by olive (2012-06-17 22:00:23)

Installer error? - cannot find files

I am running Arch 0.7 on one computer, and was going to install it on another. However, the CDROM installation stopped with the messages
error: /mnt/var/lib/pacman/current/kbd-12.1-1/desc: Nosuch file o
error: /mnt/var/lib/pacman/current/kbd-12.1-1/desc: Nosuch file o
error: cannot resolve dependencies for "autoconf":
mawk is not in the package set
I was loading 'base' only, all packages. What I have tried so far:
check MD5sum - is ok
reburn the arch 07 CD - no difference
download, MD5check and burn the base-only version - no difference
use another CDreader - no difference
Since I KNOW that it all works ok (or I would not have arch running on one computer) I am stumped. I would have suspected a hardware error if the target computer was not running an old (10.1) Slackware ok, and has shown no strange symptoms, nor has any tests shown any problems.
Any suggestions of what to do next?

noobohno wrote: Am I doing something fundamentally wrong here?
Just did, thanks. Seems there's a problem with the 0.7.2 installer from the Arch website. Explained at http://bbs.archlinux.org/viewtopic.php?t=25236.
Got the unreleased new FTP installer ISO as the above suggests from http://www.archlinux.org/~tpowa/newisos/ Burned the 17mB iso to CD and loaded it. Had kernel panic, but was sorted by adding boot options:
boot: arch noapic
Following on from that, network card installed with DHCP, could ping the WLAN, and installed base files via FTP.
All working!

Warning: cannot resolve "linux =3.5", a dependency of "virtualbox-modu

sudo pacman -S virtualbox-modules
resolving dependencies...
warning: cannot resolve "linux>=3.5", a dependency of "virtualbox-modules"
:: The following package cannot be upgraded due to unresolvable dependencies:
virtualbox-modules
Do you want to skip the above package for this upgrade? [y/N] y
looking for inter-conflicts...
there is nothing to do
This is propably the problem while I have also problems with installation glibc....
How to solve it?

Seems like you have community-testing (repo containing (newer) virtualbox-modules) enabled but not testing (containing (newer) linux), which strikes me as odd. Edit: or you need to refresh databases first...
Last edited by Raynman (2012-08-04 22:58:56)

Problem with DNS - ping/Safari cannot resolve, but host/dig work OK

Hi All,
Have a weird problem with DNS which is a bit similar to the following ones:
http://discussions.info.apple.com/thread.jspa?threadID=2190208
http://forums.macrumors.com/showthread.php?t=337942
I connect with remote internal network via OpenVPN and from time to time (yes, intermittent problem :)) internal DNS names cannot be resolved.
When it happens I can still resolve names using host or dig utilities, but applications (like Safari) and ping cannot resolve them.
resolv.conf has proper DNS server set:
*$ cat /etc/resolv.conf*
*# Mac OS X Notice*
*# This file is not used by the host name and address resolution*
*# or the DNS query routing mechanisms used by most processes on*
*# this Mac OS X system.*
*# This file is automatically generated.*
*domain openvpn*
*search openvpn*
*nameserver 10.0.0.1*
More than that - it can resolve those internal names when queried directly, for example using host:
*$ host YYY.XXX.ru 10.0.0.1*
*Using domain server:*
*Name: 10.0.0.1*
*Address: 10.0.0.1#53*
Aliases:
*YYY.XXX.ru has address 192.168.x.y*
but at the same time ping reports "*Unknown host*":
*$ ping YYY.XXX.ru*
*ping: cannot resolve YYY.XXX.ru: Unknown host*
I tried "*dscacheutil -flushcache*" and it did not help. Also tried to comment out domain and search directives in resolv.conf and it did not help as well (and actually it should not matter).
Any ideas why this can happen and what else can I check when it happens again?
Thanks!

I have the same issue. It cropped up after I installed updates to MS Office 2008 and Firefox in which I also saw issues with the icons disappearing in the dock of the applications that were open when I started the Office update. I rebooted to try to get them back, but ended up deleting them and restoring from the Applications folder. I don't know if that's a red herring or not, but I generally try to figure out what has recently changed that may cause something to suddenly start failing.
I'd been working successfully all morning before it started acting up. Switching from wifi to cat5 had no effect.
@realaaa, were you able to resolve without a major undertaking, like reinstalling your OS?
pnmbp:~ pn$ dig goo.gl
; <<>> DiG 9.6.0-APPLE-P2 <<>> goo.gl
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40996
;; flags: qr rd ra; QUERY: 1, ANSWER: 6, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;goo.gl. IN A
;; ANSWER SECTION:
goo.gl. 140 IN A 74.125.45.139
goo.gl. 140 IN A 74.125.45.102
goo.gl. 140 IN A 74.125.45.113
goo.gl. 140 IN A 74.125.45.138
goo.gl. 140 IN A 74.125.45.101
goo.gl. 140 IN A 74.125.45.100
;; Query time: 27 msec
;; SERVER: 192.168.2.1#53(192.168.2.1)
;; WHEN: Mon Dec 13 16:59:34 2010
;; MSG SIZE rcvd: 120
pnmbp:~ pn$ ping goo.gl
ping: cannot resolve goo.gl: Unknown host
pnmbp:~ pn$ curl <a class="jive-link-external-small" href="http://">http://goo.gl
curl: (6) Couldn't resolve host 'goo.gl'
pnmbp:~ pn$ host goo.gl
goo.gl has address 74.125.45.100
goo.gl has address 74.125.45.101
goo.gl has address 74.125.45.138
goo.gl has address 74.125.45.113
goo.gl has address 74.125.45.102
goo.gl has address 74.125.45.139
pnmbp:~ pn$

Visual Studio 2012 cannot resolve symbol or Errors control is not a member of class

Visual Studio 2012 Web Site Project (Note not a Web application, so there are not Designer.vb files) > Site works perfectly fine and using IIS and attaching to IIS to debug code.
However, if I try to build the site inside of Visual Studio I am getting lots of Errors ‘pnlName’ is not a member of ‘Page_Name’ In the code behind I am getting errors ‘Cannot resolve symbol ‘pnlName’
.ascx Page
<li style="margin-right:0;" id="pnlName" runat="server"><a href="/cart" title="Checkout" class="global-checkout">Checkout</a></li>
.ascx.vb page
Me.pnlName.Attributes.Remove("style")
I have cleaned, rebuild and nothing gets rid of these errors, but again the site works as designed, but I would like to launch and debug inside of Visual Studio.
Moojjoo MCP, MCTS
MCP Virtual Business Card
http://moojjoo.blogspot.com

Cor,
What I am stating is this is a solution using the Web Site Project instead of a
Web Application Project.
Web Site projects do not require Designer.vb files, Web Application Projects add Designer.vb files in the solution.
Background: I have been hired to support a very successful e-commerce site that was built by a 3rd party vendor (I had no input on the contract or specification, because I would have went with
MVC). The site works 100% correctly, however from my 2003 - 2015 experience with Visual Studio and Web Development being in Web Forms and MVC I have always built ASP.NET Solutions using the Web Application Project Templates, which compiles the code down
to .dlls.
A Web Site project does not compile the code, but simply uses the .vb files and they have to be migrated to the server with the .aspx files. http://msdn.microsoft.com/en-us/library/dd547590%28v=vs.110%29.aspx
Currently the only way I can debug this Solution is to attach to the w3wp.exe process running locally on my work station.
The Solution is comprised of two Web Sites, which I cannot get it to compile because of the following errors -
'webServerControlName' is not a member of '(Protected Code Behind Class Name)' I am reaching out to the MSDN community to see if anyone has experienced this issue with
Web Site Projects.
I hope that clears up the Project Type question.
Moojjoo MCP, MCTS
MCP Virtual Business Card
http://moojjoo.blogspot.com

Invoking a web service - cannot resolve method parameter

I am getting a failure trying to invoking a method called sl_Access on a web service.
(Same code worked in Workshop 7.1, but fails in Workshop 8.0. The WDSL has not
changed.) WLW is not able to revolve a method parameter called piCustNo. The service
call works in WLW 7.1, but not 8.0.
Any insight on how to fix this problem?
The service call
private AnonType_sl_AccessResponse response = null;
nlastid = response.piLastId;
the service definition from wsdlControl.jcx ----
* @jc:protocol form-post="false" form-get="false" http-soap="true"
public AnonType_sl_AccessResponse sl_Access (int piCustno);
console error output -----
Submitted at Wednesday, October 8, 2003 2:15:22 PM EDT
Exception in sl_Access
com.bea.control.ServiceControlException:
SOAP-ENV:Client
An error was detected in the Web Service request. (10894)
Cannot resolve method sl_Access parameter ns:piCustno (10933)e91a6247e9b693c3:-1b6d127:f811fed2db:-8000#17
at com.bea.wlw.runtime.core.control.ServiceControlImpl.invoke(ServiceControlImpl.jcs:846)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java:359)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:420)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:393)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(JcsProxy.java:387)
at $Proxy11.sl_Access(Unknown Source)
at com.ovid.service.AccessService.getRepl(AccessService.java:93)
at com.ovid.service.AccessService.processBatch(AccessService.java:71)
at Controller.runAccess(Controller.jws:399)

see:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.workshop&item=1730
Joe Smith wrote:
>
I am getting a failure trying to invoking a method called sl_Access on a web service.
(Same code worked in Workshop 7.1, but fails in Workshop 8.0. The WDSL has not
changed.) WLW is not able to revolve a method parameter called piCustNo. The service
call works in WLW 7.1, but not 8.0.
Any insight on how to fix this problem?
The service call
private AnonType_sl_AccessResponse response = null;
nlastid = response.piLastId;
the service definition from wsdlControl.jcx ----
* @jc:protocol form-post="false" form-get="false" http-soap="true"
public AnonType_sl_AccessResponse sl_Access (int piCustno);
console error output -----
Submitted at Wednesday, October 8, 2003 2:15:22 PM EDT
Exception in sl_Access
com.bea.control.ServiceControlException:
SOAP-ENV:Client
An error was detected in the Web Service request. (10894)
Cannot resolve method sl_Access parameter ns:piCustno (10933)e91a6247e9b693c3:-1b6d127:f811fed2db:-8000#17
at com.bea.wlw.runtime.core.control.ServiceControlImpl.invoke(ServiceControlImpl.jcs:846)
at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java:359)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:420)
at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:393)
at com.bea.wlw.runtime.jcs.container.JcsProxy.invoke(JcsProxy.java:387)
at $Proxy11.sl_Access(Unknown Source)
at com.ovid.service.AccessService.getRepl(AccessService.java:93)
at com.ovid.service.AccessService.processBatch(AccessService.java:71)
at Controller.runAccess(Controller.jws:399)

Getting error message Cannot Resolve Symbol when trying to compile a class

Hello All -
I am getting an error message cannot resolve symbol while trying to compile a java class that calls another java class in the same package. The called class compiles fine, but the calling class generates
the following error message:
D:\Apache Tomcat 4.0\webapps\examples\WEB-INF\classes\cal>javac
ConnectionPool.java
ConnectionPool.java:158: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
private void addConnection(PooledConnection value) {
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
The code is listed as follows for PooledConnection.java (it compiles fine)
package cal;
import java.sql.*;
public class PooledConnection {
// Real JDBC Connection
private Connection connection = null;
// boolean flag used to determine if connection is in use
private boolean inuse = false;
// Constructor that takes the passed in JDBC Connection
// and stores it in the connection attribute.
public PooledConnection(Connection value) {
if ( value != null ) {
connection = value;
// Returns a reference to the JDBC Connection
public Connection getConnection() {
// get the JDBC Connection
return connection;
// Set the status of the PooledConnection.
public void setInUse(boolean value) {
inuse = value;
// Returns the current status of the PooledConnection.
public boolean inUse() {
return inuse;
// Close the real JDBC Connection
public void close() {
try {
connection.close();
catch (SQLException sqle) {
System.err.println(sqle.getMessage());
Now the code for ConnectionPool.java class that gives the cannot
resolve symbol error
package cal;
import java.sql.*;
import java.util.*;
public class ConnectionPool {
// JDBC Driver Name
private String driver = null;
// URL of database
private String url = null;
// Initial number of connections.
private int size = 0;
// Username
private String username = new String("");
// Password
private String password = new String("");
// Vector of JDBC Connections
private Vector pool = null;
public ConnectionPool() {
// Set the value of the JDBC Driver
public void setDriver(String value) {
if ( value != null ) {
driver = value;
// Get the value of the JDBC Driver
public String getDriver() {
return driver;
// Set the URL Pointing to the Datasource
public void setURL(String value ) {
if ( value != null ) {
url = value;
// Get the URL Pointing to the Datasource
public String getURL() {
return url;
// Set the initial number of connections
public void setSize(int value) {
if ( value > 1 ) {
size = value;
// Get the initial number of connections
public int getSize() {
return size;
// Set the username
public void setUsername(String value) {
if ( value != null ) {
username = value;
// Get the username
public String getUserName() {
return username;
// Set the password
public void setPassword(String value) {
if ( value != null ) {
password = value;
// Get the password
public String getPassword() {
return password;
// Creates and returns a connection
private Connection createConnection() throws Exception {
Connection con = null;
// Create a Connection
con = DriverManager.getConnection(url,
username, password);
return con;
// Initialize the pool
public synchronized void initializePool() throws Exception {
// Check our initial values
if ( driver == null ) {
throw new Exception("No Driver Name Specified!");
if ( url == null ) {
throw new Exception("No URL Specified!");
if ( size < 1 ) {
throw new Exception("Pool size is less than 1!");
// Create the Connections
try {
// Load the Driver class file
Class.forName(driver);
// Create Connections based on the size member
for ( int x = 0; x < size; x++ ) {
Connection con = createConnection();
if ( con != null ) {
// Create a PooledConnection to encapsulate the
// real JDBC Connection
PooledConnection pcon = new PooledConnection(con);
// Add the Connection to the pool.
addConnection(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// Adds the PooledConnection to the pool
private void addConnection(PooledConnection value) {
// If the pool is null, create a new vector
// with the initial size of "size"
if ( pool == null ) {
pool = new Vector(size);
// Add the PooledConnection Object to the vector
pool.addElement(value);
public synchronized void releaseConnection(Connection con) {
// find the PooledConnection Object
for ( int x = 0; x < pool.size(); x++ ) {
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// Check for correct Connection
if ( pcon.getConnection() == con ) {
System.err.println("Releasing Connection " + x);
// Set its inuse attribute to false, which
// releases it for use
pcon.setInUse(false);
break;
// Find an available connection
public synchronized Connection getConnection()
throws Exception {
PooledConnection pcon = null;
// find a connection not in use
for ( int x = 0; x < pool.size(); x++ ) {
pcon = (PooledConnection)pool.elementAt(x);
// Check to see if the Connection is in use
if ( pcon.inUse() == false ) {
// Mark it as in use
pcon.setInUse(true);
// return the JDBC Connection stored in the
// PooledConnection object
return pcon.getConnection();
// Could not find a free connection,
// create and add a new one
try {
// Create a new JDBC Connection
Connection con = createConnection();
// Create a new PooledConnection, passing it the JDBC
// Connection
pcon = new PooledConnection(con);
// Mark the connection as in use
pcon.setInUse(true);
// Add the new PooledConnection object to the pool
pool.addElement(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// return the new Connection
return pcon.getConnection();
// When shutting down the pool, you need to first empty it.
public synchronized void emptyPool() {
// Iterate over the entire pool closing the
// JDBC Connections.
for ( int x = 0; x < pool.size(); x++ ) {
System.err.println("Closing JDBC Connection " + x);
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// If the PooledConnection is not in use, close it
if ( pcon.inUse() == false ) {
pcon.close();
else {
// If it is still in use, sleep for 30 seconds and
// force close.
try {
java.lang.Thread.sleep(30000);
pcon.close();
catch (InterruptedException ie) {
System.err.println(ie.getMessage());
I am using Sun JDK Version 1.3.0_02" and Apache/Tomcat 4.0. Both the calling and the called class are in the same directory.
Any help would be greatly appreciated.
tnx..
addi

Is ConnectionPool in this "cal" package as well as PooledConnection? From the directory you are compiling from it appears that it is. If it is, then you are compiling it incorrectly. To compile ConnectionPool (and PooledConnection similarly), you must change the current directory to the one that contains cal and type
javac cal/ConnectionPool.

Missing method body and cannot resolve symbol

I keep getting these two errors when trying to compile. I know that I need to call my fibonacci and factorial functions from the main function. Is this why I am getting the missing method body error? How do I correct this?
Am I getting the cannot resolve symbol because I have to set the num and fact to equal something?
Thanks
public class Firstassignment
public static void main(String[]args)
     System.out.println();
public static void fibonacci(String[]args);
     int even=1;
     int odd=1;
     while (odd<=100);
     System.out.println(even);
     int temp = even;
     even = odd;
     odd = odd + temp;
public static void factorial (String[]args);
     for (int count=1;
     count<=num;
     count++);
     fact = fact * count;
     outputbox.printLine("Factorial of" + num + "is" + fact);

Hey... :o)
the problem is that you've put semicolons at the end of the function signature, like this:
public static void fibonacci(String[]args);
}that should happen only when the function is abstract... so ur function should actually look like this:
public static void fibonacci(String[]args)
}also, i think you've missed out on the declarations (like what are fact and num??)....

I have a vintage mac computer that I am trying to download the asian language pack for simplified chinese; However the error message tells me I need an update installer?? Cannot find the right download for the 10.5.8 OS

I have a 10.5.8 os and need the simplified Chinese languag pack which I have not been able to download. It says I need an update installer which I cannot find as well/ or one that will work. Any suggestions?

Are you sure it is not already there? In system preferences/international/language, don't you see simplified Chinese on the list? It is supposed to be there. You just move it to the top and restart to put the OS into that language.
Missing language packs can also normally be installed by running the Language Translations installers found in the OptionalInstalls.mpkg of the Leopard DVD.

Compc: cannot resolve mx:Object to a component implementation

Hi,
I need to migrate a component library to Flex 3.0 but i am
running into problems with one simple component when trying to
build the swc by the compc command line tool from within an ant
script. In FB3.0 the library is created as expected without any
errors. So here is my component:
quote:
<mx:ApplicationToolbar xmlns:mx="
http://www.adobe.com/2006/mxml".....>
<mx:Object id="xyz">
</mx:Object>
</mx:ApplicationToolbar>
Using flex 3.0 compc I get the mentioned error:
"cannot resolve <mx:Object id="xyz" to a component
implementation"
What is wrong? Why the compiler does not complain when using
FB 3.0 ?
(Compiling with flex 2.0.1 compc works fine too)
Hope someone can help me.
Thanks in advance,
Andreas.

Hi,
Object is a top-level class, so i do not have to import it.
Fortunataly, I found the solution. I had to include the
following into my ant build script:
quote:
<compc ...>
<load-config
filename="${FLEX_HOME}/frameworks/flex-config.xml"/>
</compc>
Now the library is compiled as expected!

Installation of Archboot: cannot resolve "kernel26-lts"

Similar Messages

Maybe you are looking for