Installation of New Part

I recieved a new part to install on my iPod mini. The part I recieved is to fix the back (rewind) button because it is not working. I have not been able to find directions on how to put this new part into my iPod. Can someone please shed some light on the idea for me?

From the iPod Users Manual;
"Do Not Make Repairs Yourself
Warning Do not attempt to open your iPod or power adapter, disassemble it, or remove the battery. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside."
Apparently, they mistakenly sent you a part.
You are the first person I have ever heard of receiving a "part" to an iPod.
Go to http://www.apple.com/support/selfservice/status and see what the status is for this repair.
It should say they sent you a part.
You should also use the case/dispatch number when you contact Apple.

Similar Messages

  • Why do I need to return the old part, if I purchase a new part?

    Well, I had a problem with my motherboard, and got it replaced by an on-site tech HP sent me.
    The notebook is well out of warranty, aand I paid for the new motherboard+labor.
    However, when the tech showed up, he said he won't replace the motherboard unless I give him the old motherboard. He went on to say that this was the "company policy" and he won't let me keep any old part even if I pay for the new part.
    I was too tired t o argue with him, and he replaced the motherboard, and took away the old motherboard.
    On second thought, this is pretty absurd.
    It's like HP telling me "If you purchase a new HP notebook, you'll have to return your old HP notebook back to us".
    It would make sense if I was getting a free replacement and the notebook was under warranty. It doesn't make any sense when the notebook is out of warranty and I'm paying for the replacement part.
    Think of it, when I purchased the notebook, i obviously paid for the motherboard that came with the notebook. So why does HP get to take it away from me?
    If I purchase a new battery from HP store instead of amazon, do I need to return my old battery to HP?
    If I purchase a new keyboard from the HP store, do I need to return my old keyboard?
    I can give you the case number if you want.
    Honestly, if this is the "company policy", I won't ever bother with another HP product again.
    This question was solved.
    View Solution.

    HP only has new motherboards. They sell the bad ones into the Chinese market and they show up on eBay and similar places. You have a new motherboard. If you can tell us the part number of what you bought we can tell you the "full" price and the "exchange" price of the part. They should definitely explain the options to you but I think they likely assume you want the lower exchange price. 

  • How to setup MM costing and drive for new parts before ECM release key is triggered?

    Hi,
        I am on the engineering side of SAP ERP where I create new materials, BOMs, etc.  We do this with a change master without release key today.   We are switching to a more controlled/managed process for engineering changes where we will use change masters with a release key and approval workflows for these tasks (ECM).   The problem we are seeing is that the supply chain side of the business is not able to perform their tasks of costing materials and driving for new parts until the ECM workflows are complete, release key is active, and the changes are valid for production.  There must be a way for supply chain to perform these tasks beforehand, so that when the release key becomes active, material costing is complete, new materials are already on hand (or at least been ordered), so that the process of procurement/production orders are not delayed.  Can you point me to documentation that provides an overview, or summarizes what the best practices are for our supply chain when we start working with ECM release keys?
    Thanks,
    Joseph

    the release key allows you to release the change for specific business functions. Please look at the options available in release key configuration. You will need multiple release keys to bring the changes in a more controlled manner.

  • I have 2 old sony ericsson units and i am in need of new parts (lcd for k800, ring flex for p1i). can i still order original parts from sony ericsson??

    I have 2 old sony ericsson units and i am in need of new parts (lcd for k800, ring flex for p1i). can i still order original parts from sony ericsson?

    http://cnn.cn/shop/sonyericsson-k800i-c-28_168.html You can order the LCD screen for the K800 from here--I've used them before and their service is excellent.There are also some P1i spares on the same website.As far as I know, SE doesn't actually supply such spares.

  • Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

    Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.

    The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

  • Exchange 2010 server (Mail,HUB and CAS) installation in new site.

    We are  planned to install Exchange 2010 servers(MAIL,HUB and CAS) server in new Active director site in existing exchange organization.
    Kindly share best practice link for exchange server installation in new site.

    The best practice for installing into a new Active Directory site is the same as installing into a new organization, except you don't need to prepare the organization or domains (unless you are also installing into a new domain that hasn't been prepared).
    Install the CAS then hub, then mailbox roles, or install a multi-role server, then define your CAS Array name and IP address, and set your CAS behind a load balancer (if needed). Add your external certificate to both the CAS and the load balancer (and the
    hub if you use TLS for mail transfer), and you should be golden.  Also, if you intend to proxy your CAS connections, here's a link that may help: 
    https://technet.microsoft.com/en-us/library/bb310763.aspx?f=255&MSPPError=-2147217396
    For completeness, here's a thread on the msexchange.org forums that specifically mentions adding Exchange into a second site: 
    http://forums.msexchange.org/New_Exchange_2010_at_another_Site/m_1800557445/tm.htm

  • HT201210 Lost YouTube after installation of new software for both iPad and iTune. How to reinstall?

    Lost YouTube after installation of new software for both iPad and iTune. How to reinstall?

    Try this free YouTube app for iPad:
    http://itunes.apple.com/be/app/jasmine-youtube-client/id554937050?mt=8

  • Work on New Part Review and Release (NPRR), a bolt-on system (extension)...

    hi.................
    i need to know detail information about this and need to generate RICE components....
    " Work on New Part Review and Release (NPRR), a bolt-on system (extension)..........
    Only after approval from NPRR, the item gets transferred to Oracle EBS..."
    Can u help me in this..............

    prices pricestamp = new prices();
    for(int c=0; c < stringtext.length-1; c+)
    mmm=stringtext[c];
    mmm=mmm.trim();
    ccc=mmm.split("\\s");
    pricestamp.time=Integer.parseInt(ccc[0]);
    pricestamp.price=Double.parseDouble(ccc[1]);
    data.add(pricestamp);
    }This is definitely wrong. You have only created one instance of pricestamp and you just keep overwriting it with new values. You need to put the new inside the loop to create a new instance for each row.
    Also I doubt you really mean .length - 1, that doesn't include the last row.
    Style wise:
    Class names should always start with capital letters, fields and variable always with lower case letters. These conventions aren't imposed by the compiler but are established practice, and make your code a lot easier to follow. Use "camel case" to divide you names into words e.g. priceStamp
    When using single letter names for integer indices people tend to expect i through n. This is a historical thing, dating back to FORTRAN.

  • After installing iOS 6.0, YouTube was gone, and can't fine it at app store.  The installation of new updates is never succecessful.  And there seems to be no way that you can stop it.  Why is that?

    After installing iOS 6.0, the previously installed YouTube was gone, and couldn't  find it at app store.  Also, the installation of new updates Can not be completed, they have been in "installing" status for days.  And there seems to be no way that I  can cancel it.  What should I do?

    Thanks, I understand that.  Now the biggest problem is that I can not purchase or install anything from App Store.  They have been in "waiting" mode ever since I tried to install them.  What might be the reason? 

  • Where can I order new parts for the A60?

    I was wondering if anyone knew where you can order new parts for the A60. At the moment my A60 is in bits... My dog stood on the AC connector at the back and snapped the internal prong off.
    I've removed the part by removing the solder from the component which was relatively easy to do.... but now i've got to find the new part which seems not so easy. The part is relatively simple so i would imagine quite cheap so i thought i'd fit it myself and save the repair bill which i couldn't justify paying on such an old laptop. I searched this site to find an email support but can't seem to find one anywhere.
    Any ideas are welcome.
    Thanks .
    Snoot.

    Hello
    You can contact the Toshiba authorized Service partner and there you can order all compatible and supported parts for your notebook.
    On this site you will find the ASP which is responsible for your country.
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    Bye

  • Acrobat 9 Pro upgrade installation on new PC

    Hi,
    I've installed Acrobat 9 Pro on my new PC using the serial number I received when I bought it in 2010.
    However, as part of the installation process, I'm now being asked for the serial number for the original product that this one was an upgrade for. I don't have that, as I bought it in 2008.
    Is there any way I can find it online?

    Hi NickCrowhurst,
    Thank You for posting on the forums. Kindly helps with the information listed below for further assistance.
    1.where did you purchase the previous version of acrobat from (Adobe/Reseller)
    2.Did you register the product.
    However, kindly follow the steps mentioned in the article listed below, hope it helps.
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload
    Thanks,
    Vikrantt Singh

  • Had a windows partition but was too small; with bootcamp made 1 new part and then tryiing to make a new wind part wich is bigger, but that is not working

    Hello
    I have a nem apple macbook and made a 20 GB windows part on mac with bootcamp..after 1 week saw that 20 GB was too small so with bootcamp i removed the part, made 1 part of mac and then tried to make the new bigger oart of windows with bootcamp; this is not working; the mac will not recognize the windows installation cd

    hansthebeast wrote:
    Hello
    I have a nem apple macbook and made a 20 GB windows part on mac with bootcamp..after 1 week saw that 20 GB was too small so with bootcamp i removed the part, made 1 part of mac and then tried to make the new bigger oart of windows with bootcamp; this is not working; the mac will not recognize the windows installation cd
    Try asking your Boot Camp question in the Boot Camp forum rather than in the Windows Compatibility forum. The Boot Camp gurus hang out in the Boot Camp forum: https://discussions.apple.com/community/windows_software/boot_camp

  • Installation on new hard drive

    I have a G4 Quicksilver that had a mechanical failure in the hard drive, so I had a new one installed. I have all of the original installation disks: OS 9.2.1, OS 10.1, displays software, and software restore (4 of them). I don't really need OS 9 (couldn't tell you the last time I used it) and was using OS 10.3 (have that installation disks as well). If I install OS 10 first, and run software update, can I then just run the software restore? Will it cause any problems that I won't have OS 9 installed? Does software restore allow you to choose the applications you want to install, so that I don't end up with those that only run in OS 9?
    Thanks for your help.

    I do not understand why you want to run Software Restore if you have OS 10.3. SR simply installs everything that was on the computer when you bought it. In your case this is an obsolete OS plus other stuff like Safari etc. But those other programs are also on the 10.3 CD.
    As for your specific question, the SR CD's I have had did allow both a default installation of everything as well as a custom install where you select what you want.

  • Windows XP installation on new machines

    Hey, anybody knows if the latest Toshiba machines support Windows XP installation,
    or it is commonly accepted to support only Windows 7 and later OS?
    I tried to install Windows XP Pro SP3, 2008 release on Satellite C660 machine released in 2011,
    and it crashed at the beginning of installation. Can it be that Bios prevents the installation,
    forcing to work with Win 7?
    Or some drivers are missing in XP installation pack, making XP incompatible with HW?

    On this forum you will find many threads where you can find answer to your question and also good explanation how to install WXP on new notebook models.
    > I tried to install Windows XP Pro SP3, 2008 release on Satellite C660 machine released in 2011,
    and it crashed at the beginning of installation.
    I presume it happen because of missing SATA driver. It must be loaded with F6 before WXP installation starts. You can also create WXP installation disc with integrated SATA driver. How to do this you can read on
    http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm
    http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
    If you have more questions you are welcome.
    By the way: have you created recovery DVD before you have started WXP installation?

  • Installer for new Adobe CC Desktop app is a miss

    Hi,
    I launched CC desktop (Windows) this morning and it notified me of an update. I clicked on "Install Now" and the download process started. Then the installation started and at the end, the application closed (in order to restart with the new version, I guess). It never restarted and I could not relaunch it. Logged off, logged in again and restarted Adobe CC. It notified me again of an available update. Endless loop starting...
    After multiple attempts, I tried to uninstall from the Control Panel. No way (operation ended in error with no further explanation). I looked at the c:\Program Files (x86) folder and discovered I had two Adobe Creative Cloud subfolders : C:\Program Files (x86)\Adobe\Adobe Creative Cloud and the same one followed by a version number : C:\Program Files (x86)\Adobe\Adobe Creative Cloud_versionxxxxxxxx. Launching C:\Program Files (x86)\...\ACC\Creative Cloud.exe from either folder gave the same result : a new version is available blah, blah,... Endless loop restarting...
    Since I could not uninstall, I deleted both folders and downloaded the Adobe CC Desktop installer. At the end of the installation, Adobe CC restarted but this crashed the Windows Explorer process. Then the application freezed while "File syncing".
    I had to reboot and relaunch Adobe CC to get this toy working. It then took an eternity (about 10 minutes) in order to display the installed apps.
    This, added to the many failures related to the installation of PS CC 2014, leads me to think that the QA dpt. at Adobe are currently taking their summer vacations.

    Seems to be working again...!
    So after restart it looked the same... in startup tab it showed the cloud manager. But was not running. Went to my downloads folder where I still had the installer downloaded before my windows restore (the one downloaded yesterday was deleted after windows restore was done). Ran the installer and exually did something this time! It is installed again. At first it looked like it wanted me to download all the programs again even though I checked if they where still working... they did. (via bridge checked updates said they where all up to date).
    Changed the language in the prefs panal under apps to English. Now it all looks like before I ran into this issue.
    Not sure... But my guess is that it had to do with the latest windows update.
    So... no need for a chat with support anymore
    But... I do hope adobe will update the cloud manager asap so I can update my windows again.

Maybe you are looking for