Installation of oracle 10 broke java conversions
I have been using some java conversion .bats for a while until I installed Oracle 10. Now they will not work. My OS is XP pro. Any help would be appreciated
Hi again,
assumption proven ;-)
full details from Oracle below
HTH,
Peter
Applies to: Oracle Server - Enterprise Edition - Version: 10.2.0.1
SymptomsWhile installing Oracle10gR2 on a Solaris 10 x86-64 server, Oracle Universal Installer (OUI) reports the following errors while checking the kernel parameters:
shmsys:shminfo_shmmax=4294967295 found no entry . Failed <<
shmsys:shminfo_shmmni=100 found no entry . Failed <<
shmsys:shminfo_semmni=100 found no entry . Failed <<
shmsys:shminfo_semmsl=256 found no entry . Failed <<
The overall results of this check is Failed.
The kernel parameters do not meet the minimum requirements
CauseOUI is looking at /etc/system to check the kernel parameter settings, but this file is not used (by default) in Solaris 10
OUI should check the kernel parameter settings using the resource control utility ( /bin/prctl )
SolutionTo implement the solution, please execute one the following steps:
1. Verify that the kernel parameter settings are correct using the resource control utility ( /bin/prctl ) and then start OUI like this:
./runInstaller -ignoreSysPrereqs
OR
2. Include the recommended kernel parameter settings in the /etc/system file and start OUI as normal:
./runInstaller
Similar Messages
-
Portal Addin broke Java installation
Read Hat EL Workstation:
I downloaded the portal-addin.zip and folled the install instruction. It did absolutly not work. Instead it broke my Java installation. When calling java from the command linie I get:
libgcj-java-placeholder.sh
This script is a placeholder for the /usr/bin/java and /usr/bin/javac
master links required by jpackage.org conventions. libgcj's
rmiregistry, rmic and jar tools are now slave symlinks to these
masters, and are managed by the alternatives(8) system.
This change was necessary because the rmiregistry, rmic and jar tools
installed by previous versions of libgcj conflicted with symlinks
installed by jpackage.org JVM packages.
When I look at the java links I see
java -> /etc/alternatives/java
java -> /usr/share/java/libgcj-java-placeholder.sh
but the script contains nothing but echos:
cat /usr/share/java/libgcj-java-placeholder.sh
#!/bin/sh
echo "libgcj-java-placeholder.sh"
echo
echo "This script is a placeholder for the /usr/bin/java and /usr/bin/javac"
echo "master links required by jpackage.org conventions. libgcj's"
echo "rmiregistry, rmic and jar tools are now slave symlinks to these"
echo "masters, and are managed by the alternatives(8) system."
echo
echo "This change was necessary because the rmiregistry, rmic and jar tools"
echo "installed by previous versions of libgcj conflicted with symlinks"
echo "installed by jpackage.org JVM packages.
Questions:
1) How are the links supposed to point in order for my java to work?
2) How to get the portal addin to work?
3) How can Oracle provide me with such crap which screws up my system and wastes my time?
Flemming G. JensenOTN Customer Team!
Are you able to answer an Oracle customer (and partner ) on this topic?
Or is this forum a dead-end??
--Flemming -
Java Plug-in problems following installation of Oracle 9i
I have been experiencing repeatable problems with the Sun Java Plug-in following installation of Oracle 9i on our servers. Our installation of the Sun JDK 1.3.1_04 or higher seems to conflict with the Oracle installation. Following the install, navigating to any web page that includes an applet reference results in a plug-in error stating that it cannot locate the registry key HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\1.3.1_01. The key does exist however for the installed version of the plug-in. ie [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\1.3.1_07]. My only workaround to fix this is to add a new registry key 1.3.1_01 that contains the contents of the registry key for the installed plug-in (for example 1.3.1_07).
The Oracle installation only inlcludes the JRE, which AFAIK isn't referenced outside the ORACLE_HOME directory. The internal JVM couldn't be causing the conflict either. Might be an installer bug of some sort, but not one I have heard of.
-
Oracle XDK Java 9.2.0.2.0 installation problem
Hi,
I downloaded xdk_java_9_2_0_2_0 and I did change the default connection with my username and password in XSQLConfig.xml file. When I tried to execute XSQL.bat file under bin folder I am getting the error in dos window as follows
Bad command or file name
Oracle XDK Java 9.2.0.2.0 Production
XSQL-005: XSQL page is not well-formed.
XML parse error at line 1, char 1
Start of root element expected.
Please suggest me what I need to do...This means your XSQL page is not well-formed XML document. Please check the syntax in your .xsql file.
-
Oracle XDK Java removing security vulnerabilities
Hi All,
I am looking for removing security vulnerabilities that may be associated with XML parsers.
I am looking which version of Oracle XDK Java has removed security vulnerabilities associated with XML Parsing.
Also what is the latest version Oracle XDK Java is present in market.
Also is new version are backward compatible. Do we need to see is any change in API level occurs.
Currently we are using Oracle XDK Java 10.2.0.2.
Just a description of security vulnerabilities that may be associated with XML parsers are
"The vulnerabilities are related to the parsing of XML elements with unexpected byte values and recursive parentheses, which cause the program to access memory out of bounds, or to loop indefinitely. The effects of the vulnerabilities include denial of service and potentially code execution. The vulnerabilities can be exploited by enticing a user to open a specially modified file, or by submitting it to a server that handles XML content.:
Regards
Atul PartiWhich JVM is the security tool complaining about (what is the directory path, for example)?
My guess is that the tool is complaining about the older JVM that Oracle installs in order to run the Oracle Universal Installer and the other Java-based installation tools. If that's the case, those JVMs do not generally represent a security issue because they are not running anything on a day-to-day basis. They're only used by things like the OUI which only get invoked when someone wants to do something like install new software. Ideally, you'd be able to have the conversation with the security folks and explain that those older JVMs exist only for the limited purpose of running the OUI and the other configuration tools.
If the security folks want you to upgrade the Java version (as opposed to just installing patches to the older JVMs), that has a decent probability of breaking the various installation and configuration tools. That may not have much impact on a day-to-day basis but may make administration tasks in the future more challenging.
Justin -
SAP NetWeaver CE 7.2 Installation error in Deploying java component phase
Dear Experts,
I am installing CE7.2 but i am getting error in 37th phase (DEPLOY JAVA COMPONENT). Error message as
An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2
> Installation Options > Application Server Java > Standard System > Standard System(
Last error reported by the step :Execution of Deploy Controller Runner tool '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/sapjvm/sapjvm_6/bin/java -
classpath /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jce.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jsse.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_smime.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_ssl.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/w3c_http.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar:
/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib/tc~je~cl_deploy.jar
-Xmx256m -Ddc.api.verbose=false
com.sap.engine.services.dc.api.cmd.Runner
deploy -l /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/deploy.lst -e stop -u lower
-w safety --lcm bulk -t 14400000 --host sapnce --port 50004' aborts with return code 104.
Error message is 'undefinedStatus:InitialDescription:. SOLUTION: Check 'undefined' and '' for more information.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/.*
J2EE is running but I checked the cat /home/ce1adm/JdbcCon.log message as ,
Start: Sun Sep 26 02:23:40 IST 2010
OK: connected to CE1 on jdbc/pool/CE1
OK: disconnected
Stop: Sun Sep 26 02:23:42 IST 2010*
sapnce:ce1adm 16>
Then I had checked the R3 trans and log file is
4 ETW000 32 0.117400
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017' 26 0.117426
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1017 21 0.117447
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con=0, rc=1017) 21 0.117468
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1017 84 0.117552
4 ETW000 [dev trc ,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 30 0.117582
4 ETW000 [dev trc ,00000] DbSlConnect(con=-1) -> orc=0, 99=DBSL_ERR_DB 23 0.117605
4 ETW000 [dblink ,00000] ***LOG BY2=>sql error 1017 performing CON 93 0.117698
4 ETW000 [dblink ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied 24 0.117722
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'CE1'"
Please help me in this I strucked in this step for last 1 day.
Regards,
Sampath
Edited by: Matt on Sep 28, 2010 8:54 AM - changed formatting for readabilitySorry friends, this thread was already answered and closed by some one I have open a new Thread for my issue.
Hi All,
I am facing similar issue , My error also similar , Here is the summery of the error, Please help I got stuck very badly here past 2 days....I have 250 GB free space in the directory were usr/sap directory.
An error occurred while processing option SAP NetWeaver 7.3 Developer Edition > Install > Custom Server Installation( Last error reported by the step: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib/tc~je~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.
Thanks
Naveen -
Error during the installation of ORACLE 10g for SAP MDM 5.5
Hi all,
I am installing ORACLE 10g on a SUSE LES 9 for a future MDM 5.5 system. While I launch the Installer I get the following error:
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-09-26_07-11-46AM. Please wait ...oracle@mucsapt2:/home/lrougkal/OraDb10g/database> Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-09-26_07-11-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I have installed all the required packages from SUSE :
binutils-2.15.90.0.1.1-32.10
gcc-3.3.3-43.41
gcc-c++-3.3.3-43.41
glibc-2.3.3-98.61
gnome-libs-1.4.1.7-671.1
libstdc++-3.3.3-43.41
libstdc++-devel-3.3.3-43.41
make-3.80-184.1
pdksh-5.2.14-780.7
sysstat-5.0.1-35.7
xscreensaver-4.16-2.6
Any ideas?
Thanks in advance,
LoukasHi Elmar,
I have checked the packages and the XFree86-libs-4.3.99 is not installed. I guess I will have to install it.
Now your question about oracle user. I am not sure if you have performed any SAP MDM installation with ORACLE RDBMS but the installation guide is totally different than the normal SAP inst guides. Indeed someone needs to install separately SAP MDM and ORACLE and in my installation I do not install NetWeaver since it is not mandatory for the testing phase of the project. You can have a look at the guide (it is very poor -no reference to ORACLE details):
https://websmp105.sap-ag.de/~sapidb/011000358700000271882007E
So the official ORACLE inst gudie says to install the ORACLE software with the oracle user.
Rgds,
Louka -
Installation of Oracle APPS 11 on Windows XP Professional
Dear all,
I downloaded all the zip files needed for Oracle APPS 11 from edelivery.oracle.com
Now I'm trying to install the package but I get stuck on an error. I already installed DeVC++ (in folder C:\VC98) and installed ActivePerl.
During rapidwiz alle the zipfiles are being unzipped and after that I get the following error:
RW50004: Error code received when running external process. Check log file for details.
Running database install driver for VIS instance
The log file shows me the following:
Hope you can help me with this.
Greetings,
Charif
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 11.5.10.35
>> Install session started : Fri May 02 12:05:34 CEST 2008
>> Rapid Wizard source location : E:\oracleextract2\startCD\Disk1\rapidwiz
>> Command Line arguments for this execution :
=================================================================
Install Session Information
Host Name : server.charif.nl
Host Operating System : Windows
User running Install : Administrator
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
InstallPanel
User action : Create configuration file
Description : To create a new intance cofiguration.
NumNodesPanel
Install type : Single node Install
Description : Installs all the services on a single node.
InstallSidPanel
Database type : Vision Demo Database
Database name : VIS
RdbmsPanel
Derived Mount Points :
Base Install directory : c:\oracle
Oracle Home : c:\oracle\visdb\9.2.0
Data Top (SYS) : c:\oracle\visdata
Data Top (LOG) : c:\oracle\visdata
Data Top (TXN) : c:\oracle\visdata
Data Top (ARCHIVE) : c:\oracle\visdata
MtierInfoPanel
Configuration Information for Node - server - Admin Server / Concurrent Mgr / Forms Server / Web Server
Derived Mount Points :
MKS directory : C:\cygwin\bin
MSDEV directory : C:\VC98
Base Install directory : c:\oracle
APPL_TOP Mount point : c:\oracle\visappl
APPL_TOP aux. 1 : c:\oracle\visappl
APPL_TOP aux. 2 : c:\oracle\visappl
APPL_TOP aux. 3 : c:\oracle\visappl
COMMON_TOP : c:\oracle\viscomn
8.0.6 ORACLE_HOME : c:\oracle\visora\8.0.6
iAS ORACLE_HOME : c:\oracle\visora\iAS
Temp Directory : c:\oracle\viscomn\temp
PortPanel
Selected port pool :
Domain Name : charif.nl
Database Port : 1521
RPC Port : 1626
Reports Port : 7000
Web Listener Port : 8000
OProcMgr Port : 8100
Web PLSQL Port : 8200
Servlet Port : 8800
Forms Listener Port : 9000
Metrics Server Data Port : 9100
Metrics Server Req. Port : 9200
JTF Fulfillment Server Port : 9300
Map Viewer Servlet Port : 9800
OEM Web Utility Port : 10000
VisiBroker OrbServer Agent Port : 10100
MSCA Server Port : 10200
MSCA Dispatcher Port : 10300
Java Object Cache Port : 12345
OACORE Servlet Port Range : 16000-16009
Discoverer Servlet Port Range : 17000-17009
Forms Servlet Port Range : 18000-18009
XMLSVCS Servlet Port Range : 19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
ConfigFilePanel
Setting temp directory to : C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp <-> C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\
Writing configuration file to : C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
RPC Port Value = 1626...... Available
Forms Listener Port Value = 9000...... Available
Metrics Server Port Value = 9100...... Available
Metrics Client Port Value = 9200...... Available
Forms Servlet Port Range Value = 18000...... Available
Forms Servlet Port Range Value = 18001...... Available
Forms Servlet Port Range Value = 18002...... Available
Forms Servlet Port Range Value = 18003...... Available
Forms Servlet Port Range Value = 18004...... Available
Forms Servlet Port Range Value = 18005...... Available
Forms Servlet Port Range Value = 18006...... Available
Forms Servlet Port Range Value = 18007...... Available
Forms Servlet Port Range Value = 18008...... Available
Forms Servlet Port Range Value = 18009...... Available
Report Listener Port Value = 7000...... Available
Web Listener Port Value = 8000...... Available
Web Listener PLSQL Port Value = 8200...... Available
Servlet Port Value = 8800...... Available
JTF Fulfillment Server Port Value = 9300...... Available
Map Viewer Servlet Port Value = 9800...... Available
OEM Web Utility Port Value = 10000...... Available
VisiBroker OrbServer Agent Port Value = 10100...... Available
MSCA Server Port Value = 10200...... Available
MSCA Dispatcher Port Value = 10300...... Available
OACORE Servlet Port Range Value = 16000...... Available
OACORE Servlet Port Range Value = 16001...... Available
OACORE Servlet Port Range Value = 16002...... Available
OACORE Servlet Port Range Value = 16003...... Available
OACORE Servlet Port Range Value = 16004...... Available
OACORE Servlet Port Range Value = 16005...... Available
OACORE Servlet Port Range Value = 16006...... Available
OACORE Servlet Port Range Value = 16007...... Available
OACORE Servlet Port Range Value = 16008...... Available
OACORE Servlet Port Range Value = 16009...... Available
Discoverer Servlet Port Range Value = 17000...... Available
Discoverer Servlet Port Range Value = 17001...... Available
Discoverer Servlet Port Range Value = 17002...... Available
Discoverer Servlet Port Range Value = 17003...... Available
Discoverer Servlet Port Range Value = 17004...... Available
Discoverer Servlet Port Range Value = 17005...... Available
Discoverer Servlet Port Range Value = 17006...... Available
Discoverer Servlet Port Range Value = 17007...... Available
Discoverer Servlet Port Range Value = 17008...... Available
Discoverer Servlet Port Range Value = 17009...... Available
XMLSVCS Servlet Port Range Value = 19000...... Available
XMLSVCS Servlet Port Range Value = 19001...... Available
XMLSVCS Servlet Port Range Value = 19002...... Available
XMLSVCS Servlet Port Range Value = 19003...... Available
XMLSVCS Servlet Port Range Value = 19004...... Available
XMLSVCS Servlet Port Range Value = 19005...... Available
XMLSVCS Servlet Port Range Value = 19006...... Available
XMLSVCS Servlet Port Range Value = 19007...... Available
XMLSVCS Servlet Port Range Value = 19008...... Available
XMLSVCS Servlet Port Range Value = 19009...... Available
Operating System Check
command : cmd.exe /c E:\oracleextract2\startCD\Disk1\rapidwiz\bin\checkOS.cmd
E:\oracleextract2\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Administrator\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SERVER
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Administrator
LOGONSERVER=\\SERVER
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem; C:\cygwin\bin\;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 8, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f08
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
TMP=C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
USERDOMAIN=SERVER
USERNAME=Administrator
USERPROFILE=C:\Documents and Settings\Administrator
windir=C:\WINDOWS
Operating System patch/version test has succeeded
O/S User and Group Check
Domain=SERVER
,Username=Administrator
,PC-Name=SERVER
User belongs to the Administrators Group.
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME created:
Mount Point = c:\oracle\visdb\9.2.0
Database ORACLE_HOME admin folder created:
Mount Point = c:\oracle\visdb\9.2.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = c:\oracle\visdb\9.2.0\appsutil\temp
Database Install Log Directory created:
Mount Point = c:\oracle\visdb\9.2.0\appsutil\log\VIS_server
Database Install Out Directory created:
Mount Point = c:\oracle\visdb\9.2.0\appsutil\out\VIS_server\templbac
Database System File Directory created:
Mount Point = c:\oracle\visdata
Database Log File Directory available:
Mount Point = c:\oracle\visdata
Database Transaction File Directory available:
Mount Point = c:\oracle\visdata
Database Archive File Directory available:
Mount Point = c:\oracle\visdata
APPL_TOP created:
Mount Point = c:\oracle\visappl
APPL_TOP admin created:
Mount Point = c:\oracle\visappl\admin
APPL_TOP mount 2 available:
Mount Point = c:\oracle\visappl
APPL_TOP mount 3 available:
Mount Point = c:\oracle\visappl
APPL_TOP mount 4 available:
Mount Point = c:\oracle\visappl
COMMON_TOP created:
Mount Point = c:\oracle\viscomn
JAVA_TOP created:
Mount Point = c:\oracle\viscomn\java
PORTAL_TOP created:
Mount Point = c:\oracle\viscomn\portal
Temp Directory created:
Mount Point = c:\oracle\viscomn\temp
APPL_TOP admin Install Log Directory created:
Mount Point = c:\oracle\visappl\admin\VIS_server\log
APPL_TOP admin Install Out Directory created:
Mount Point = c:\oracle\visappl\admin\VIS_server\out\templbac
Apps ORACLE_HOME created:
Mount Point = c:\oracle\visora\iAS
Tools ORACLE_HOME created:
Mount Point = c:\oracle\visora\8.0.6
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = c:\oracle\visdb\9.2.0
required = 2800.0
actual = 133092.33984375
Disk space on system acceptable :
Database System File Directory = c:\oracle\visdata
required = 12009.0
actual = 130292.33984375
Disk space on system acceptable :
Database Log File Directory = c:\oracle\visdata
required = 160.0
actual = 118283.33984375
Disk space on system acceptable :
Database Transaction File Directory = c:\oracle\visdata
required = 28438.0
actual = 118123.33984375
Disk space on system acceptable :
Database Archive File Directory = c:\oracle\visdata
required = 20186.0
actual = 89685.33984375
Disk space on system acceptable :
APPL_TOP = c:\oracle\visappl
required = 5388.0
actual = 69499.33984375
Disk space on system acceptable :
APPL_TOP mount 2 = c:\oracle\visappl
required = 2664.0
actual = 64111.33984375
Disk space on system acceptable :
APPL_TOP mount 3 = c:\oracle\visappl
required = 4667.0
actual = 61447.33984375
Disk space on system acceptable :
APPL_TOP mount 4 = c:\oracle\visappl
required = 2157.0
actual = 56780.33984375
Disk space on system acceptable :
COMMON_TOP = c:\oracle\viscomn
required = 2207.0
actual = 54623.33984375
Disk space on system acceptable :
Apps ORACLE_HOME = c:\oracle\visora\iAS
required = 1130.0
actual = 52416.33984375
Disk space on system acceptable :
Tools ORACLE_HOME = c:\oracle\visora\8.0.6
required = 2425.0
actual = 51286.33984375
Host/Domain Check
command : ping -n 1 server
Pingen naar server.charif.nl [192.168.160.132] met 32 byte gegevens:
Antwoord van 192.168.160.132: bytes=32 tijd=5 ms TTL=128
Ping-statistieken voor 192.168.160.132:
Pakketten: verzonden = 1, ontvangen = 1, verloren = 0
(0% verlies).De gemiddelde tijd voor het uitvoeren van ‚‚n bewerking in milliseconden:
Minimum = 5ms, Maximum = 5ms, Gemiddelde = 5ms
host ping has succeeded
command : ping -n 1 server.charif.nl
Pingen naar server.charif.nl [192.168.160.132] met 32 byte gegevens:
Antwoord van 192.168.160.132: bytes=32 tijd<1 ms TTL=128
Ping-statistieken voor 192.168.160.132:
Pakketten: verzonden = 1, ontvangen = 1, verloren = 0
(0% verlies).De gemiddelde tijd voor het uitvoeren van ‚‚n bewerking in milliseconden:
Minimum = 0ms, Maximum = 0ms, Gemiddelde = 0ms
host.domain ping has succeeded
OS Patch Checks
running command : OSPatchCheck.checkPatch()
OS = Windows XP OSVersion = 5.1
No Patch Information available for this Platform
System Utilities Check
command : cmd.exe /c E:\oracleextract2\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin C:\VC98
There was an error while running the command - cmd.exe /c E:\oracleextract2\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin C:\VC98
C:\VC98\bin\vcvars32.bat wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
E:\oracleextract2\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/usr/bin/cc
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has succeeded
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from Rapid Install Full Stage area E:\oracleextract2\oraDB\Disk1
RapidWiz location: E:\oracleextract2\startCD\Disk1\rapidwiz
Install Media location: E:\oracleextract2\startCD\Disk1
APPL_TOP location: c:\oracle\visappl
Database ORACLE_HOME: c:\oracle\visdb\9.2.0
Database SID: VIS
Database Context Name : VIS_server
Creating 9.2.0 DB Context from E:\oracleextract2\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
instantiate file:
source : E:\oracleextract2\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
instantiate file:
source : c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
dest : c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
instantiate file:
source : c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
dest : c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
instantiate file:
source : c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
dest : c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
instantiate file:
source : c:\oracle\visdb\9.2.0\temp\restart.xml
dest : c:\oracle\visdb\9.2.0\temp\restart.xml
instantiate file:
source : c:\oracle\visdb\9.2.0\temp\restart.xml
dest : c:\oracle\visdb\9.2.0\temp\restart.xml
Creating APPL_TOP Context from E:\oracleextract2\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp to c:\oracle\visappl\admin\VIS_server.xml
instantiate file:
source : E:\oracleextract2\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : c:\oracle\visappl\admin\VIS_server.xml
instantiate file:
source : c:\oracle\visappl\admin\VIS_server.xml
dest : c:\oracle\visappl\admin\VIS_server.xml
instantiate file:
source : c:\oracle\visappl\admin\VIS_server.xml
dest : c:\oracle\visappl\admin\VIS_server.xml
instantiate file:
source : c:\oracle\visappl\admin\VIS_server.xml
dest : c:\oracle\visappl\admin\VIS_server.xml
instantiate file:
source : c:\oracle\visappl\admin\VIS_server.xml
dest : c:\oracle\visappl\admin\VIS_server.xml
instantiate file:
source : c:\oracle\viscomn\temp\restart.xml
dest : c:\oracle\viscomn\temp\restart.xml
instantiate file:
source : c:\oracle\viscomn\temp\restart.xml
dest : c:\oracle\viscomn\temp\restart.xml
Processing DriverFile = E:\oracleextract2\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for E:\oracleextract2\startCD\Disk1\rapidwiz\template\adridb.drv
Processing DriverFile = E:\oracleextract2\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for E:\oracleextract2\startCD\Disk1\rapidwiz\template\adriapps.drv
Total number of processes in Current Install 5
Processing DriverFile = E:\oracleextract2\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for E:\oracleextract2\startCD\Disk1\rapidwiz\template\adridb.drv
Creation of Directory - C:\oracle\visdb\9.2.0\temp\VIS_server Succeeded.
instantiate file:
source : E:\oracleextract2\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : c:\oracle\visdb\9.2.0\temp\VIS_server\adrun9i.cmd
backup : c:\oracle\visdb\9.2.0\temp\VIS_server\adrun9i.cmd to c:\oracle\visdb\9.2.0\appsutil\out\VIS_server\templbac\adrun9i.cmd
instantiate file:
source : E:\oracleextract2\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : c:\oracle\visdb\9.2.0\temp\VIS_server\adrundb.cmd
backup : c:\oracle\visdb\9.2.0\temp\VIS_server\adrundb.cmd to c:\oracle\visdb\9.2.0\appsutil\out\VIS_server\templbac\adrundb.cmd
Step 0 of 5
Command: c:\oracle\visdb\9.2.0\temp\VIS_server\adrun9i.cmd
Processing Step 1 of 5
Executing: c:\oracle\visdb\9.2.0\temp\VIS_server\adrun9i.cmd APPS APPS
E:\oracleextract2\startCD\Disk1\rapidwiz>REM
E:\oracleextract2\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.31 2004/08/19 21:47:16 psaddi ship $
E:\oracleextract2\startCD\Disk1\rapidwiz>REM ###############################################################
E:\oracleextract2\startCD\Disk1\rapidwiz>REM
E:\oracleextract2\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
E:\oracleextract2\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
E:\oracleextract2\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink document
E:\oracleextract2\startCD\Disk1\rapidwiz>REM 165195.1 for assistance.
E:\oracleextract2\startCD\Disk1\rapidwiz>REM
E:\oracleextract2\startCD\Disk1\rapidwiz>REM ###############################################################
E:\oracleextract2\startCD\Disk1\rapidwiz>REM
E:\oracleextract2\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
E:\oracleextract2\startCD\Disk1\rapidwiz>(set date=vr 02-05-2008 )
E:\oracleextract2\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
E:\oracleextract2\startCD\Disk1\rapidwiz>(set time=12:07 )
E:\oracleextract2\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : vr 02-05-2008 12:07
STARTED INSTALL PHASE : 9I RDBMS : vr 02-05-2008 12:07
E:\oracleextract2\startCD\Disk1\rapidwiz>SET JRE_PATH=E:\oracleextract2\startCD\Disk1\rapidwiz\jre\NT\1.4.2\bin\java
E:\oracleextract2\startCD\Disk1\rapidwiz>SET JRE_CP=.;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\rt.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\i18n.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\jnls.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\acc.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\netcfg.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\java
E:\oracleextract2\startCD\Disk1\rapidwiz>SET XML_FILE=c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml
E:\oracleextract2\startCD\Disk1\rapidwiz>SET PATH=E:\oracleextract2\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem; C:\cygwin\bin\;
E:\oracleextract2\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
E:\oracleextract2\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=1 )
E:\oracleextract2\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "FALSE" == "c:\oracle\visdb\9.2.0\temp\VIS_server\adrun9i.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_1"
"runProcess_1"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Installing 9i - E:\oracleextract2\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - E:\oracleextract2\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>E:\oracleextract2\startCD\Disk1\rapidwiz\jre\NT\1.4.2\bin\java -mx512M -classpath .;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\rt.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\i18n.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\jnls.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\acc.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\netcfg.jar;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;E:\oracleextract2\startCD\Disk1\rapidwiz\jlib\java oracle.apps.ad.autoconfig.InstantiateFile -e c:\oracle\visdb\9.2.0\appsutil\VIS_server.xml -d E:\oracleextract2\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log c:\oracle\visdb\9.2.0\appsutil\log\VIS_server\dbInstall.log -nthreads 1 -verbose
Enter the location of the CD labeled Oracle Applications Rapid Install - RDBMS Disk 1 :
Checking Disk contents in - E:\oracleextract2\startCD\Disk1\rapidwiz
Checking Disk contents in - E:\oracleextract2\oraDB\Disk1
Checking Disk contents in - E:\oracleextract2\oraDB\Disk1
UnzipCount:114
Processing Disk1....
Processing Disk2....
Processing Disk3....
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 0 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_2"
"runProcess_2"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Update the oracle.key
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>call c:\oracle\visdb\9.2.0\appsutil\bin\adgenhnm.exe c:\oracle\visdb\9.2.0
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :UPDKEY_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot update oracle.key for database ORACLE_HOME"
"Cannot update oracle.key for database ORACLE_HOME"
There was an error while running the command - c:\oracle\visdb\9.2.0\temp\VIS_server\adrun9i.cmd APPS APPS
Toegang geweigerd.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
Het proces heeft geprobeerd naar een niet-bestaande sluis te schrijven.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instanceDear hsawwan.
dbinfrun.log doesn't exist
and dbinstall.log shows the following (no errors?)
Path Obtained by Instantiate FileE:\oracleextract2\oraDB\Disk1& Disk number = 1
Processing E:\oracleextract2\oraDB\Disk1\db\driver\db920.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : E:\oracleextract2\oraDB\Disk1\db\driver\Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.52 of 28 February 2005, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh49_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh49_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip1 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh48_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh48_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip2 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh50_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh50_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip3 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh49_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh49_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip4 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh23_classes0.zip at c:\oracle\visdb\9.2.0\
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh23_classes0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip5 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh48_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh48_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip6 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh23_classes1.zip at c:\oracle\visdb\9.2.0\
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh23_classes1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip7 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh47_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh47_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip8 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh63_oui.zip at c:\oracle\visdb\9.2.0\
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh63_oui.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip9 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh69_sysman.zip at c:\oracle\visdb\9.2.0\
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh69_sysman.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip10 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh54_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh54_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip11 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh13_appsutil.zip at c:\oracle\visdb\9.2.0\
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh13_appsutil.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip12 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh51_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh51_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip13 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh21_bin.zip at c:\oracle\visdb\9.2.0\
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh21_bin.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip14 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh45_network.zip at c:\oracle\visdb\9.2.0\
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh45_network.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip15 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh51_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh51_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip16 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh3_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh3_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip17 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh53_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh53_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip18 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh11_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh11_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip19 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh23_classes.zip at c:\oracle\visdb\9.2.0\
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh23_classes.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip20 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh12_appsoui.zip at c:\oracle\visdb\9.2.0\
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh12_appsoui.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip21 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh54_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh54_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip22 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh22_classes.zip at c:\oracle\visdb\9.2.0\
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh22_classes.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip23 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh52_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh52_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip24 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh29_demo.zip at c:\oracle\visdb\9.2.0\
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh29_demo.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip25 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh22_classes0.zip at c:\oracle\visdb\9.2.0\
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh22_classes0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip26 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh52_oem_webstage1.zip at c:\oracle\visdb\9.2.0\
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh52_oem_webstage1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip27 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh1_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh1_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip28 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh53_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh53_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip29 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh46_oci.zip at c:\oracle\visdb\9.2.0\
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh46_oci.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip30 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh5_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh5_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip31 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh50_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh50_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip32 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh13_appsutil0.zip at c:\oracle\visdb\9.2.0\
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh13_appsutil0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip33 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh62_ord.zip at c:\oracle\visdb\9.2.0\
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh62_ord.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip34 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh22_classes1.zip at c:\oracle\visdb\9.2.0\
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh22_classes1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip35 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh52_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh52_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip36 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh65_rdbms.zip at c:\oracle\visdb\9.2.0\
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh65_rdbms.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip37 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh19_bin.zip at c:\oracle\visdb\9.2.0\
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh19_bin.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip38 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh42_jre.zip at c:\oracle\visdb\9.2.0\
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh42_jre.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip39 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh64_rdbms.zip at c:\oracle\visdb\9.2.0\
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh64_rdbms.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip40 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh61_Omwb.zip at c:\oracle\visdb\9.2.0\
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh61_Omwb.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip41 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh32_javavm.zip at c:\oracle\visdb\9.2.0\
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh32_javavm.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip42 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh25_ctx.zip at c:\oracle\visdb\9.2.0\
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh25_ctx.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip43 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh20_bin0.zip at c:\oracle\visdb\9.2.0\
Unzip43
.end std out.
.end err out.
Unzip43 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh20_bin0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip44 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh20_bin.zip at c:\oracle\visdb\9.2.0\
Unzip44
.end std out.
.end err out.
Unzip44 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh20_bin.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip45 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh70_ultrasearch.zip at c:\oracle\visdb\9.2.0\
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh70_ultrasearch.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip46 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh7_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh7_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip47 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh27_ctx.zip at c:\oracle\visdb\9.2.0\
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh27_ctx.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip48 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh24_classes.zip at c:\oracle\visdb\9.2.0\
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh24_classes.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip49 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh28_demo.zip at c:\oracle\visdb\9.2.0\
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk1\db\stage\dboh28_demo.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip50 - Start of native unzipping E:\oracleextract2\oraDB\Disk1\db\stage\dboh36_javavm.zip at c:\oracle\visdb\9.2.0\
AutoConfig is exiting with status 0
Processing disk file : disk.label in E:\oracleextract2\oraDB\Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : E:\oracleextract2\oraDB\Disk2\db\driver\Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip51 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh16_assistants.zip at c:\oracle\visdb\9.2.0\
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh16_assistants.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip52 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh17_assistants.zip at c:\oracle\visdb\9.2.0\
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh17_assistants.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip53 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh51_oem_webstage1.zip at c:\oracle\visdb\9.2.0\
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh51_oem_webstage1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip54 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh50_oem_webstage1.zip at c:\oracle\visdb\9.2.0\
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh50_oem_webstage1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip55 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh14_assistants.zip at c:\oracle\visdb\9.2.0\
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh14_assistants.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip56 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh4_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh4_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip57 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh2_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh2_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip58 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh8_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh8_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip59 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh6_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh6_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip60 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh18_bin.zip at c:\oracle\visdb\9.2.0\
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh18_bin.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip61 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh0_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh0_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip62 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh40_jlib.zip at c:\oracle\visdb\9.2.0\
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh40_jlib.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip63 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh55_oem_webstage.zip at c:\oracle\visdb\9.2.0\
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh55_oem_webstage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip64 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh26_ctx.zip at c:\oracle\visdb\9.2.0\
Unzip64
.end std out.
.end err out.
Unzip64 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh26_ctx.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip65 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh10_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh10_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip66 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh47_oem_webstage0.zip at c:\oracle\visdb\9.2.0\
Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh47_oem_webstage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip67 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh65_rdbms0.zip at c:\oracle\visdb\9.2.0\
Unzip67
.end std out.
.end err out.
Unzip67 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh65_rdbms0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip68 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh38_jlib.zip at c:\oracle\visdb\9.2.0\
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh38_jlib.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip69 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh66_rdbms.zip at c:\oracle\visdb\9.2.0\
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh66_rdbms.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip70 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh57_olap.zip at c:\oracle\visdb\9.2.0\
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh57_olap.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip71 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh45_network0.zip at c:\oracle\visdb\9.2.0\
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh45_network0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip72 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh64_rdbms0.zip at c:\oracle\visdb\9.2.0\
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh64_rdbms0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip73 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh21_bin0.zip at c:\oracle\visdb\9.2.0\
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh21_bin0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip74 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh29_demo0.zip at c:\oracle\visdb\9.2.0\
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh29_demo0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip75 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh37_javavm.zip at c:\oracle\visdb\9.2.0\
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh37_javavm.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip76 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh52_oem_webstage2.zip at c:\oracle\visdb\9.2.0\
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh52_oem_webstage2.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip77 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh46_oci0.zip at c:\oracle\visdb\9.2.0\
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh46_oci0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip78 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh19_bin0.zip at c:\oracle\visdb\9.2.0\
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh19_bin0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip79 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh48_oem_webstage1.zip at c:\oracle\visdb\9.2.0\
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh48_oem_webstage1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip80 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh68_sysman.zip at c:\oracle\visdb\9.2.0\
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk2\db\stage\dboh68_sysman.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip81 - Start of native unzipping E:\oracleextract2\oraDB\Disk2\db\stage\dboh35_javavm.zip at c:\oracle\visdb\9.2.0\
AutoConfig is exiting with status 0
Processing disk file : disk.label in E:\oracleextract2\oraDB\Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : E:\oracleextract2\oraDB\Disk3\db\driver\Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip82 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh67_sysman.zip at c:\oracle\visdb\9.2.0\
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh67_sysman.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip83 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh66_rdbms0.zip at c:\oracle\visdb\9.2.0\
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh66_rdbms0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip84 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh59_olap.zip at c:\oracle\visdb\9.2.0\
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh59_olap.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip85 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh56_olap.zip at c:\oracle\visdb\9.2.0\
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh56_olap.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip86 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh60_Omwb.zip at c:\oracle\visdb\9.2.0\
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh60_Omwb.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip87 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh39_jlib.zip at c:\oracle\visdb\9.2.0\
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh39_jlib.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip88 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh22_classes2.zip at c:\oracle\visdb\9.2.0\
Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh22_classes2.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip89 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh27_ctx0.zip at c:\oracle\visdb\9.2.0\
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh27_ctx0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip90 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh9_.patch_storage.zip at c:\oracle\visdb\9.2.0\
Unzip90
.end std out.
.end err out.
Unzip90 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh9_.patch_storage.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip91 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh61_Omwb0.zip at c:\oracle\visdb\9.2.0\
Unzip91
.end std out.
.end err out.
Unzip91 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh61_Omwb0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip92 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh15_assistants.zip at c:\oracle\visdb\9.2.0\
Unzip92
.end std out.
.end err out.
Unzip92 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh15_assistants.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip93 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh58_olap.zip at c:\oracle\visdb\9.2.0\
Unzip93
.end std out.
.end err out.
Unzip93 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh58_olap.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip94 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh11_.patch_storage0.zip at c:\oracle\visdb\9.2.0\
Unzip94
.end std out.
.end err out.
Unzip94 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh11_.patch_storage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip95 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh7_.patch_storage0.zip at c:\oracle\visdb\9.2.0\
Unzip95
.end std out.
.end err out.
Unzip95 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh7_.patch_storage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip96 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh53_oem_webstage1.zip at c:\oracle\visdb\9.2.0\
Unzip96
.end std out.
.end err out.
Unzip96 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh53_oem_webstage1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip97 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh70_ultrasearch0.zip at c:\oracle\visdb\9.2.0\
Unzip97
.end std out.
.end err out.
Unzip97 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh70_ultrasearch0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip98 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh62_ord0.zip at c:\oracle\visdb\9.2.0\
Unzip98
.end std out.
.end err out.
Unzip98 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh62_ord0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip99 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh69_sysman0.zip at c:\oracle\visdb\9.2.0\
Unzip99
.end std out.
.end err out.
Unzip99 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh69_sysman0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip100 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh47_oem_webstage1.zip at c:\oracle\visdb\9.2.0\
Unzip100
.end std out.
.end err out.
Unzip100 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh47_oem_webstage1.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip101 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh63_oui0.zip at c:\oracle\visdb\9.2.0\
Unzip101
.end std out.
.end err out.
Unzip101 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh63_oui0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip102 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh12_appsoui0.zip at c:\oracle\visdb\9.2.0\
Unzip102
.end std out.
.end err out.
Unzip102 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh12_appsoui0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip103 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh31_inventory.zip at c:\oracle\visdb\9.2.0\
Unzip103
.end std out.
.end err out.
Unzip103 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh31_inventory.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip104 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh5_.patch_storage0.zip at c:\oracle\visdb\9.2.0\
Unzip104
.end std out.
.end err out.
Unzip104 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh5_.patch_storage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip105 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh40_jlib0.zip at c:\oracle\visdb\9.2.0\
Unzip105
.end std out.
.end err out.
Unzip105 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh40_jlib0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip106 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh3_.patch_storage0.zip at c:\oracle\visdb\9.2.0\
Unzip106
.end std out.
.end err out.
Unzip106 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh3_.patch_storage0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip107 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh23_classes2.zip at c:\oracle\visdb\9.2.0\
Unzip107
.end std out.
.end err out.
Unzip107 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh23_classes2.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip108 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh34_javavm.zip at c:\oracle\visdb\9.2.0\
Unzip108
.end std out.
.end err out.
Unzip108 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh34_javavm.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip109 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh44_lib.zip at c:\oracle\visdb\9.2.0\
Unzip109
.end std out.
.end err out.
Unzip109 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh44_lib.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..DUnzip91 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh61_Omwb0.zip at c:\oracle\visdb\9.2.0\
Unzip91
.end std out.
.end err out.
Unzip91 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh61_Omwb0.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip92 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh15_assistants.zip at c:\oracle\visdb\9.2.0\
Unzip92
.end std out.
.end err out.
Unzip92 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh15_assistants.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip93 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh58_olap.zip at c:\oracle\visdb\9.2.0\
Unzip93
.end std out.
.end err out.
Unzip93 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh58_olap.zip -d c:\oracle\visdb\9.2.0\
Thread exiting ..Unzip94 - Start of native unzipping E:\oracleextract2\oraDB\Disk3\db\stage\dboh11_.patch_storage0.zip at c:\oracle\visdb\9.2.0\
Unzip94
.end std out.
.end err out.
Unzip94 - Completed native unzipping unzip -qn E:\oracleextract2\oraDB\Disk3\db\stage\dboh11_.patch_storage0.zip - -
Installation of Oracle AS 10g on Red Hat ES 3.0
Installation of Oracle AS 10g on RedHat ES 3.0 (All issues are cleared and u will b done with no error like Java Configuration Failed and make files errors)
Red Hat Enterprise Linux 3 Custom Installation
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1. Boot the server using the first CD.
o You may need to change your BIOS settings to allow booting from the CD.
2. The boot screen appears with the boot: prompt at the bottom of the screen.
o Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3. Language Selection
o Accept the default.
4. Keyboard Configuration
o Accept the default.
5. Welcome Screen
o Click on Next.
6. Mouse Configuration
o Accept the default.
7. Installation Type
o Select Custom.
8. Disk Partitioning Setup
o A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9. Boot Loader Configuration
o Accept the default.
10. Network Configuration
o It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o In the Hostname box, select manually and enter the hostname.
o In the Miscellaneous Settings box, enter the remaining network settings.
11. Firewall Configuration
o For the purposes of this walk-through, no firewall is configured. Select No firewall.
12. Additional Language Support
o Accept the default.
13. Time Zone Selection
o Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14. Set Root Password
o Enter a password for root, and enter it again to confirm.
15. Package Group Selection
o Select only the package sets shown here. Leave all others unselected.
o Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o Applications
- Editors
- Graphical Internet
o Servers
- Do not select anything in this group.
o Development
- Development Tools
o System
- Administration Tools
o Red Hat Enterprise Linux
- Do not select anything in this group.
o Miscellaneous
- Legacy Software Development
o Click on Next to proceed.
16. About to Install
o Click on Next.
17. Installing Packages
o Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18. Graphical Interface (X) Configuration
o Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19. Monitor Configuration
o Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20. Customize Graphical Configuration
o Accept the defaults.
21. Congratulations
o Remove the installation media from the system, and click on Next.
22. The system automatically reboots and presents a new welcome screen.
o Click on Next.
23. License Agreement
o Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24. Date and Time
o Set the Date and Time.
o If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25. User Account
o Create an account for yourself.
o Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26. Red Hat Network
o If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27. Additional CDs
o Click on Next.
28. Finish Setup
o Click on Next.
29. A graphical login screen appears.
30. Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln âsf /usr/bin/gcc296 /usr/bin/gcc
ln âsf /usr/bin/g++296 /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora ⦠oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan
@CES
[email protected]Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
oracleasmlib-1.0.0-1.i386.rpm \
oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant -
Download Oracle Spatial Java Library
Hi,
Has anyone been able to download the Oracle Spatial Java Library? The error I receive is that I have agreed to the license terms even though I have checked all the check boxes and clicked on "I Agree". The same happens when trying to download the documentation for the same product and I am logged in at the time.
Regards,
SeanIf you have oracle enterprise , oracle spatial java library comes bundled with it.
You may look at $ora_home/product/{version}/db_1/md/jlib/sdoapi.jar , just change the path according to your installation. I just tried to provide you an hint.
/BR
Ravi
Edited by: user4753049 on Feb 10, 2011 12:48 AM -
Error starting Oracle BI Java Host service
Hi,
We are facing some issue while starting the Oracle BI Java Host service. It throws the following error.
This application was working properly till some 2 days back and suddenly it has started giving this error. We have not updated any software. The host machine is Win XP.
Sep 27, 2011 12:08:15 PM Main main
INFO: Javahost config file(s): C:\OracleBI\web\javahost\config\config.xml. Xpath:.
Sep 27, 2011 12:08:16 PM ApplicationImpl createEnvironment
INFO: Config environment properties:
presentation.coreconfigdir=C:\OracleBI\web\config
javahostdir=C:\OracleBI\web\javahost
rootdir=C:\OracleBI
presentation.dataconfigdir=C:\OracleBIData\web\config
presentation.rootdir=C:\OracleBI\web
tempdir=C:\OracleBIData\tmp
presentation.cordaroot=C:\OracleBI\Corda50
Sep 27, 2011 12:08:16 PM ApplicationImpl init
SEVERE: java.io.IOException: Unable to establish loopback connection
at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
at java.security.AccessController.doPrivileged(Native Method)
at sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
at sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
at java.nio.channels.Pipe.open(Pipe.java:133)
at sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:104)
at sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
at com.siebel.analytics.javahost.Listener.<init>(Listener.java:53)
at com.siebel.analytics.javahost.ApplicationImpl.init(ApplicationImpl.java:121)
at com.siebel.analytics.javahost.standalone.Main.init(Main.java:127)
Caused by: java.net.SocketException: No buffer space available (maximum connections reached?): bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:119)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:52)
at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:72)
... 9 more
Request some input to resolve this error.
Thanks in advance.@Deepak,
Following are the log contents
Sep 27, 2011 12:08:15 PM Main main
INFO: Javahost config file(s): C:\OracleBI\web\javahost\config\config.xml. Xpath:.
Sep 27, 2011 12:08:16 PM ApplicationImpl createEnvironment
INFO: Config environment properties:
presentation.coreconfigdir=C:\OracleBI\web\config
javahostdir=C:\OracleBI\web\javahost
rootdir=C:\OracleBI
presentation.dataconfigdir=C:\OracleBIData\web\config
presentation.rootdir=C:\OracleBI\web
tempdir=C:\OracleBIData\tmp
presentation.cordaroot=C:\OracleBI\Corda50
Sep 27, 2011 12:08:16 PM ApplicationImpl init
SEVERE: java.io.IOException: Unable to establish loopback connection
at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
at java.security.AccessController.doPrivileged(Native Method)
at sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
at sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
at java.nio.channels.Pipe.open(Pipe.java:133)
at sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:104)
at sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
at com.siebel.analytics.javahost.Listener.<init>(Listener.java:53)
at com.siebel.analytics.javahost.ApplicationImpl.init(ApplicationImpl.java:121)
at com.siebel.analytics.javahost.standalone.Main.init(Main.java:127)
Caused by: java.net.SocketException: No buffer space available (maximum connections reached?): bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:119)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:52)
at sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:72)
It also mentions about the buffer space....could that be a reason for this.
By the way, I forgot to mention, this deployment is in a VMWare (with XP as OS) which is hosted on Windows Server. -
CE installation error in Deploy java component phase
Hi experts,
During CE7.2 installation in deployment java component phase i am getting error
An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2 > Installation Options > Application Server Java > Standard System > Standard System( Last error reported by the step :At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/sapjvm/sapjvm_6/bin/java -classpath /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib:/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/CE1/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/CE1/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/CE1/SYS/global/security/lib/tools/w3c_http.jar:/usr/sap/CE1/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar:/usr/sap/CE1/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar:/usr/sap/CE1/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar:/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib/tcje~cl_deploy.jar -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner getParams -o /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/DCRetrievedVars.props --host sapnce --port 50004' aborts with return code 108. Error message is 'undefinedHint: 1) Check the causing exception for the details. 2) Ask for help in BC-JAS-COR.Reason: Exception while trying to get InitialContext.. SOLUTION: Check 'undefined' and '' for more information.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/.
I mentioned the java.log file here,
INFO: Starting to transform 'TroubleTicketResults.xml' to 'LogAnalyzer.html' using stylesheet '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/REPORTING/OverallStatus.xsl'.
INFO: Input parameters:
status=error
instana_xml=/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/__instana_tmp.xml
keydb_xml=/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/keydb.xml
INFO: Transformation finished.
kindly help me to resole this issue.
Regards,
Sampath.Dear All,
This issue get resolved, this is due to insufficient space in usr/sap directory.
Regards,
Sampath. -
Help needed on installation of Oracle 9i on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Help needed on installation of Oracle 9i EE on Sun Solaris 8
Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
SimonI have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM -
Installation of Oracle 11gR2 in suse 12.1
Hi,
I recently installed the the linux Open suse 12.1, I have only one os in my pc. Now i want to install Oracle, can any one help me how to install and what are the packages to install before installation of oracle and where can i get those package.
One more point is I am newly to the linux, I dont know anything about this linux, Just 2 days before i installed the os. Can any one help me for this query
Thanks and regards,
G.ManikantaHow many PC's and OS's do you have ;-) Installation of oracle 11gR2 in fedora 16
Supported OS versions are listed in the Install Doc - http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
If you insist on using an unsupported OS, you are on your own.
HTH
Srini
Maybe you are looking for
-
Error "The entry is missing in T009" during PO creation
Hello expert, I have created one new plant. Also assign with Company code and Purchasing Organization. Now when i am going to create Purchase Order, error message is showing "The entry is missing in T009" Pls give resoluation asap. Regards, Nilesh
-
The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it. My new Mac Book Pro does not have home vault open. But I am unable to back up my new MAC pro laptop because it says there is not enough storag
-
I found a bug in Power Query. Anyone know why this occurs?
It took some time to isolate the cause of this. One of our SharePoint sites couldn't successfully be connected to with Power Query for Excel 2013. We would receive this message: "DataSource.Error: OData: The feed's metadata document appears to be in
-
Function Module for syntax check on the repository objects
Hi Experts, Can anyone help me in finding out the function module used to do syntax check on Repository objects(PRograms/Smartforms/FUnction Modules...etc.,) Dr. Arif Shaik
-
Web service destination creation
In CE 7.2 I need to a create a new web service destination and assign destination type. Please guide me with any sdn blogs or docs. Any help is appreciated Thank you