Installation of Oracle VDI 3.4.1 fails at applying the Sun Ray patch

Downloaded VDI 3.4.1 for Solaris, checked md5 OK against download page, attempted a freash installation rather than upgrade and it failed at applying the Sun Ray patch.
Solaris 10 u9 x86 full installation with recommend patches (OK its a ESXi 64 bit virtual machine, but need to test before I try it on the real hardware)
Fresh installation of Solaris & patches (automated via JET), which works fine for installing VDI 3.4
VDI 3.4.1 fresh install
unzip -q p14226229_34_Solaris86-64.zip
cd vda_3.4.1_solaris_amd64
+ Installing Sun Ray Server...
Error: There was a problem installing Sun Ray Software 5.3.1.0
Check '/var/sadm/install/logs/vda-install.2012_07_26_15:46:10.log' for details.
See the log file '/var/sadm/install/logs/vda-install.2012_07_26_15:46:10.log' for additional information.
I check the log file and its failing to install patch 149156-01, looking at the patch log there is a message about attempting to install the same architecture and version of a package which is already installed, then a message from checkinstall "........<full patch to check install>/checkinstall: cannot open"
So has anyone else actually downloaded and installed Oracle VDI 3.4.1 on Solaris 10 u9 x86 successfully?
Paul

OK went back to Oracle VDI 3.3.2 and it was still a problem on this machine. Turns out I made /software where the media is installed a ZFS partition with a quota of 5g (which hasn't hit a limit, its used less than 1g).
So the real question is why Oracle VDI won't install from a ZFS partition?
# This works fine!
mkdir /software
mkdir /software/vdi_332_Solaris86-64
cp vdi_332_Solaris86-64.zip /software
cd /software/vdi_332_Solaris86-64
unzip -q ../vdi_332_Solaris86-64.zip
cd /software/vdi_332_Solaris86-64/vda_3.3.2_solaris_amd64
./vda-install
# This Fails !
zfs create -o mountpoint=/software -o quota=5g rpool/software
mkdir /software/vdi_332_Solaris86-64
cp vdi_332_Solaris86-64.zip /software
cd /software/vdi_332_Solaris86-64
unzip -q ../vdi_332_Solaris86-64.zip
cd /software/vdi_332_Solaris86-64/vda_3.3.2_solaris_amd64
./vda-install
Root is a ZFS partition and unzip -q works fine (I summed all files in both structures and they are the same). There is something in the vda-install that breaks due to it being a separate ZFS partition.
Paul

Similar Messages

Windows failed to apply the Internet Explorer Zonemapping settings - the data was invald (event ID: 1085)

Hi All,
I have a large domain and a long list of websites that are trusted using the following group policy setting:
Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page >
Site to Zone Assignment List
On all (XP/vista/win7) workstations across the domain I'm getting the following error:
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Event ID: 1085
Task Category: None
Level: Warning
Keywords: Description: Windows failed to apply the Internet Explorer Zonemapping settings. Internet Explorer Zonemapping settings might have its own log file.
There's nothing either side of this error in the log that shines any more light on the issue.
I know which group policy object its applying these settings but cant find which of the entries in the site to zone assignment list is causing this issue. I looked in the
Group Policy/Operational log but all I see is the following entry which says "completed" but is logged as an error:
After some research I'm guessing that the issue is an incorrect wild-card. This is what my trusted sites list looks like (with names removed of course):
http://servername.*
*.internaldomain.com.au
*.domain.com.au
*.domain.*
*.externaldomain.com
*.domain.inernaldomain.com.au
*.domain.*
*.domain/name.*
*.domain.inernaldomain.au*
*.domain.com
Is there something obviously incorrect here?
Does anyone know where I could find an article that clearly outlines the acceptable wildcard syntax for the
"Security page\ site to zone assignment list" group policy? Ive read every forum post, website and blog I could find on the internet but nothing is clear and I wasn't able to find an MS document that steps it out. I've also changed the
existing list a number of times based on blog posts etc but had no luck.
**Please Note**
I dont want to change to a different method or have an intellectual debate re why I would have these sites/wildacrd/policy set. I'm really looking to see what entry is invalid and where the documentation is for this policy setting so i can make sure they are
always correct in the future.
thanks in advance for your time and assistance
Simone
PS: I've already read the following posts a number of times:
I get no data but have identified the GP that is causing the issue:
A test case for troubleshooting group policy application – Event ID 1085 and 7016 - http://blogs.technet.com/b/askds/archive/2008/08/21/a-test-case-for-troubleshooting-group-policy-application-event-id-1085-and-7016.aspx
I dont have any 2 letter domain names:
Problems Adding Top-Level Domains to Zone Sites List - http://support.microsoft.com/kb/259493
I tried formatting the list per this article:
[Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute - http://daily-it.blogspot.com.au/2008/09/solved-group-policy-client-side.html
Has no domain wildcard format info:
Behavior of Site to Zone Assignment List - http://blogcastrepository.com/blogs/mattbro/archive/2006/09/07/2183.aspx
Great article, no wildcard data:
Internet Explorer Policy Settings - http://technet.microsoft.com/en-us/library/bb457144.aspx
Internet zonemapping problem: http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/a8756a27-b562-42ad-8782-87d284e6bcfb/
Spiceworks Event 1085 (Warning) - http://community.spiceworks.com/windows_event/show/1582-microsoft-windows-grouppolicy-1085
Event ID 1085 — Application of Group Policy - http://technet.microsoft.com/en-us/library/cc727303%28v=ws.10%29.aspx
Application of group policy - http://technet.microsoft.com/en-us/library/cc727312%28v=ws.10%29.aspx
Evt ID 1085 GP client-side extension IE ZoneMapping failed to exec - http://www.winvistatips.com/evt-id-1085-gp-client-side-extension-ie-zonemapping-failed-exec-t706399.html
Event 1085 - Internet Explorer Zonemapping - http://www.minasi.com/forum/topic.asp?TOPIC_ID=29206
EventID.net - http://www.eventid.net/display.asp?eventid=1085&eventno=1412&source=Userenv&phase=1
Event ID 1085 - Internet Explorer Zonemapping failed to execute - http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_24897522.html
UPDATE:
I disabled the original policy and created a new one with only one trusted site address in it. Then I logged into a clean test machine did some testing.What I found after a few hours of testing was; regardless of the site that I have listed in group policy
The HKCU\Software\Policies\Microsoft\Current version\Internet Settings\Zone Map Key registry entry is
always updated with that entry on the workstation. So the workstation's registry always updates the key with
*.sitename.com per the site that I have set in GP
If I run GPUPDATE /FORCE over and over again, on the same machine, under the same user account, using the same DC I get:
Failure, Failure, Failure, Success, Success, Success, Failure etc
I wasn't able to determine any pattern to the failures, I tried stopping some of the processes on that machine but didn't find anything that would make it fail/succeed reliably.
There is no AV or firewalls installed on my test machine
Anyone have any more ideas? I think I might install filemon and try to capture some more data unless there's a better tool?

Yes, and that's straight from my Microsoft TAM. As long as you include an asterisk inside those site-to-zone mappings, you'll continue to see them. The key is whether or not they're working. In my environment, I've seen complete success using the
http://*.domain.com, or
https://*.domain.com, no matter if the site is http://www.domain.com or
http://milk.does.a.body.good.domain.com. Despite the success, we continue to see the errors. It's much the same as Group Policy Preferences where you can apply a setting once, or repeatedly. If you apply
something repeatedly and it's already set, lookout for some complaints in the application log. It really is annoying. There's potential to play with the logging levels, but I'll admit that my experience ranks as "novice" in this specific section of group policy.
This link might get the creative juices flowing:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
I see you've already read a number of articles including "a test case for troubleshooting those event IDs"... I sympathize with your efforts. I despise warnings and errors that I can't solve or don't want to see, but I've researched a number of them to death
and found that many are simply "normal". Uggg... I hope this helps, but please take my advice, as with anyone else's out here, with caution. I've seen some crazy recommendations. I saw a recommendation to install SQL on a DHCP server to get failover clustering
up and running. I hope the guy asking for help didn't listen to that one! : ) - josh

Event ID 1085 on DC - Failed to Apply the Group Policy Local Users and Groups Settings

I have a domain with 2 DCs. The primary DC is running Server 2012 and is raising Event ID 1085 every 10 minutes and 20 seconds.
Windows failed to apply the Group Policy Local Users and Groups settings. Group Policy Local Users and Groups settings might have its own log file. Please click on the "More information" link.
System
- Provider
[ Name] Microsoft-Windows-GroupPolicy
[ Guid] {AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}
EventID 1085
Version 0
Level 3
Task 0
Opcode 1
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-10-20T20:09:03.706992400Z
EventRecordID 130087
- Correlation
[ ActivityID] {FDDFB8C5-9ECF-41B9-B2B4-3AD0B345A37A}
- Execution
[ ProcessID] 1000
[ ThreadID] 3280
Channel System
Computer SERVER.DOMAIN.NAME
- Security
[ UserID] S-1-5-18
- EventData
SupportInfo1 1
SupportInfo2 4404
ProcessingMode 0
ProcessingTimeInMilliseconds 10343
ErrorCode 183
ErrorDescription Cannot create a file when that file already exists.
DCName \\SERVER.DOMAIN.name
ExtensionName Group Policy Local Users and Groups
ExtensionId {17D89FEC-5C44-4972-B12D-241CAEF74509}
Everything I look up for Event ID 1085 seems to be about a different cause.
Any ideas?

I enabled tracing on a domain gpo and I still get the error when running gpupdate /force .
I'm also still getting Event 1085. Here's the trace file. I've anonymized the site/domain and the GUIDs.
2014-10-21 11:16:54.003 [pid=0x3e8,tid=0xcd0] Entering ProcessGroupPolicyExLocUsAndGroups()
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] SOFTWARE\Policies\Microsoft\Windows\Group Policy\{GUID-1}
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] BackgroundPriorityLevel ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] DisableRSoP ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] LogLevel ( 2 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] Command subsystem initialized. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Background priority set to 0 (Idle).
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ----- Parameters
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] CSE GUID : {GUID-1}
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Flags : ( X ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the current policy.
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Token (computer or user SID): S-1-5-18
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Abort Flag : Yes (0x313be090)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] HKey Root : Yes (0x80000002)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Deleted GPO List : No
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Changed GPO List : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Asynchronous Processing : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Status Callback : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] WMI namespace : Yes (0x32273740)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] RSoP Status : Yes (0x320cc7f4)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Planning Mode Site : (none)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Computer Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] User Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Calculated list relevance. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ----- Changed - 0
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Version : 19267878 (0x01260126)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-2},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-2}\Machine
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-2}
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Prev GPO : No
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Next GPO : Yes
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-4}{GUID-5}{GUID-6}{GUID-7}{GUID-8}][{GUID-9}{GUID-10}][{GUID-11}{GUID-5}{GUID-6}]
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam2 : 0x3146f978
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Link : LDAP://DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-2}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ----- Changed - 1
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Version : 1245203 (0x00130013)
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-12},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-12}\Machine
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Controllers Policy
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-12}
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Prev GPO : Yes
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Next GPO : No
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-9}{GUID-10}]
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam2 : 0x324e8198
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Link : LDAP://OU=Domain Controllers,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-12}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Completed get next GPO. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] WQL : SELECT * FROM RSOP_PolmkrSetting WHERE polmkrBaseCseGuid = "{GUID-1}"
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Purged 2 old RSoP entries.
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Logging 2 new RSoP entries.
2014-10-21 11:16:54.159 [pid=0x3e8,tid=0xcd0] RSoP Entry 0
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] RSoP Entry 1
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] Completed get GPO list. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] IsRsopPlanningMode() [SUCCEEDED(S_FALSE)]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed settings update (csePostProcess). [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed CSE post-processing. [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.267 [pid=0x3e8,tid=0xcd0] Leaving ProcessGroupPolicyExLocUsAndGroups() returned 0x000000b7

Windows failed to apply the Group Policy Printers settings

Windows failed to apply the Group Policy Printers settings. Group Policy Printer
s settings might have its own log file.
only when I edit any setting on preferences at computer or users.
Ahmed Zidan Network Administrator

Hi Ahmed,
>>Windows failed to apply the Group Policy Printers settings. Group Policy Printer
>>s settings might have its own log file.
Were we using GPP Printer extension to deploy printers? Did we deploy printers to user accounts or computer accounts? Besides,what printer did we depoly via GPP, local printer, share printer, or TCP/IP printer? Here, we can check event
logs in Event Viewer to see if more information regarding this issue can be found. Besides, we can also run command
gpresult/h gpreport.html to further check how group policy settings were applied. If necessary, we can enable GPP Printer debug logging for troubleshooting the issue.
To enable GPP Printer debug logging, we need to enable the following setting:
Computer Configuration > Policies > Administrative Templates > System > Group Policy > Logging and Tracing>Configure printer preferences logging and tracing
Regarding how to enable GPP debug logging, the following article can be referred to for more information.
Enabling Group Policy Preferences Debug Logging using the RSAT
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
Best regards,
Frank Shen

I have completed installation of Oracle 10g but I could not login into the

Please I have completed installation of Oracle 10g into my laptop but I could not login into the database to create my new tables through SQL*Plus.
I don't know what to type into these text fields. (1) Name, (2)Password and (3) Host.
Please can someone help me urgently
Fola

There are different things here to know about.
Did you also create database while installation ?
If yes then
C:\> set oracle_sid=yoursid
C:\> sqlplus username/password
If not then, please create the database first.
For "I don't know what to type into these text fields. (1) Name, (2)Password and (3) Host."
(1) Name : This is user name.
(2) Password: This is password.
(3) Host: This is oracle net service name configured in tnsnames.ora. Please refer to http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/toc.htm
-aijaz

Work failed while applying the patch 3480000

Dear All,
Please Help
At the phase of applying the patch 3480000 while upgrading from 11.58 to 11.5.10.2
workers failed:
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
Time is: Tue Apr 05 2011 06:30:13
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.

Hi Hussein,
Sorry for being late
next is output screen for patch 3480000
There are now 39641 jobs remaining (current phase=A84):
6 running, 216 ready to run and 39419 waiting.
Assigned: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
Assigned: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 4 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 1 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 3 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 6 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 8 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 2 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 7 for product fnd username APPLSYS.
FAILED: file WFXLoad.class on worker 5 for product fnd username APPLSYS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file WFXLoad.class on worker 1.
FAILED: file WFXLoad.class on worker 2.
FAILED: file WFXLoad.class on worker 3.
FAILED: file WFXLoad.class on worker 4.
FAILED: file WFXLoad.class on worker 5.
FAILED: file WFXLoad.class on worker 6.
FAILED: file WFXLoad.class on worker 7.
FAILED: file WFXLoad.class on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
next is last lines in adworker log file
adjava -mx256m -nojit oracle.apps.fnd.wf.WFXLoad -u &un_apps &pw_apps &jdbc_db_addr &jdbc_protocol US &fullpath_cln_patch/115/xml/US_cln2a12os.wfx
Error:
Program exited with status 1
Cause: The program terminated, returning status code 1.
Action: Check your installation manual for the meaning of this code on this operating system.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"h:\oracle\prodappl\ad\11.5.0\java\adjri.zip;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\rt.jar;H:\oracle\prodcomn\util\java\1.3\jdk1.3.1_07\lib\i18n.jar;h:\oracle\prodcomn\java\appsborg.zip;h:\oracle\prodora\8.0.6\forms60\java;h:\oracle\prodcomn\java"
Calling h:\oracle\prodora\8.0.6\jdk\bin\java.exe ...
Oracle Workflow XML Loader 2.6.2
Connecting to APPS@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD))) -- UTF8
Connected to (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NT4SERVER)(PORT=1521))(CONNECT_DATA=(SID=PROD)))
SQL Exception encountered during upload: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'UPLOADOBJECT'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Fatal error encountered during upload between line 10 and 35
Error encountered when upload.
AD Run Java Command is complete.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Apr 05 2011 06:30:13
Thanks&BR
Tarek

Pkgadd failed when applying the patch cluster

Hi,
When I apply the patch cluster to servers that have been jumpstarted to Sol10U3 and U4, I am getting a package add failure. The only way around this is to add install user in passwd:
install:x:0:1:installpatch:/root:/bin/true
Is there something that needs to be configured to avoid this or is the install user required?
Thanks

See the Solaris FAQ:
http://www.science.uva.nl/pub/solaris/solaris2.html#q5.59
5.59) Patch installation often fails with "checkinstall" errors.
When installing a patch, the Solaris 2.5+ patch installation procedure will execute the script "checkinstall" with uid nobody.
If any of the patch files or if any part of the path leading up to the patch directory cannot be read by nobody, an error similar to the following will appear:
patchadd . # or ./installpatch .
Generating list of files to be patched...
Verifying sufficient filesystem capacity (exhaustive method) ...
Installing patch packages...
pkgadd: ERROR: checkinstall script did not complete successfully
You can workaround this in two ways, one is to make sure that the user "nobody" can read all patch files and execute a "pwd" in the patch directory or add an account "install" to /etc/passwd:
install:x:0:1:installpatch braindamage:/:/bin/true
Installpatch and patchadd use "nobody" as a fallback if it cannot find the "install" user.

Oracle 10.2 client for linux and applying the new October Critical patch

We are using the Oracle 10.2 client on one of our linux workstations.
I can not find out if this new oracle critical patch October 05 needs to be applied to
this client. Also, does anyone know if the Oracle 10.2 client already includes the patch updates for the alert 68 patchset? Our Oracle Sever runs on a solaris operating system which will be updated with the new critical October patch, but
the linux client runs on a separate workstation.
Thanks,
Dave

See my response to this posting.
Oracle Security Patches

Installing Oracle VDI 3.3 into a zone on Solaris x86

Hi everyone,
I'm trying to install Oracle VDI into a zone on an Oracle Solaris Express x86 machine. When I unzip the installer and run ./vda-install in the top dir I get this error:
Oracle VDI 3.3 Installation
+ Installing Oracle VDI Core...
+ Installing Oracle VDI Center Agent...
+ Installing MySQL Database...
+ Installing Oracle VDI Web server...
+ Installing Oracle VDI Manager...
+ Installing RDP Broker...
+ Installing Sun Ray Client...
+ Installing Java Runtime Environment...
+ Installing Sun Ray Server...
Error: There was a problem installing Sun Ray Software 5
Check '/var/sadm/install/logs/vda-install.2011_08_26_19:19:04.log' for details.
Error: There was a problem installing Sun Ray Software 5
Check '/var/sadm/install/logs/vda-install.2011_08_26_19:19:04.log' for details.
It seems that I cannot install Sun Ray Server into a non-global zone. Well that's fine by me provided I don't actually need it.
And her's my question: what of the above do I actually need?
Günther

I guess, it's clear that you need a valid support contract for your Hardware, otherwise your in troubles. A not so bad article about that you kind find at http://www.ypass.net/blog/2010/04/solaris-licensing-changes-the-real-story/
4.) When you purchase hardware, you receive an addendum to the entitlement that grants that piece of hardware perpetual, non-transferable license and entitlement to Solaris.
and additional ...
Sun Servers with a Support Contract
- For people running Solaris on Sun hardware with a Sun hardware support contract, your support contract grants you rights to run future versions of Solaris.

Successful installation of Oracle 8.1.7 on RedHat 7.2!

Finaly! I did it! Here's how:
Didn't work out of the box, but it was relatively easy.
Generally, go to www.thomasfly.com/Oranux/ and follow the
instructions, paying attention to the dots especially ;) (you'll
understand in a while). Although the title says "Oracle 8i on RH
7.1", it worked with RH 7.2 for me (as usual -- YMMV).
Kudos go to Thomas Flyer (for the web page above) -- thanks.
Short summary:
1. I've got an Athlon PC (800MHz/256MB/30GB), a decent one. Full
install of RH7.2 (just because I'm lazy + I've got a largish HDD).
2. IBM's JDK 1.1.8 installed.
3. compat-glibc, compat-libs, compat-egcs installed
4. CRITICAL -- make sure the following gets executed before you
install (place it in .bash_profile or profile for your shell):
export LD_ASSUME_KERNEL=2.2.5
. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
Did I mention the dot? :))) I didn't notice it at first (I like
fonts pretty small), and it cost me two hours of useless
installation. Having the script SOURCED is crucial!
5. Check whether you have the following env. variables:
$ echo $LD_ASSUME_KERNEL
2.2.5
$ echo $LDEMULATION
elf_i386_glibc21
Then safely run the 'runInstall' script.
6. I also had the error with ins_ctx.mk -- I applied the
workaround from the Thomas' web page and it worked.
7. Strangely enough, I didn't have to apply the 'glibc-stubs'
patch; everything worked fine without it.
8. Then I changed the sys password, created a user, imported my
database, checked it -- everything is fine!
Good luck in your struggle!
Best regards,
Greg

Finaly! I did it! Here's how:
Didn't work out of the box, but it was relatively easy.
Generally, go to www.thomasfly.com/Oranux/ and follow the
instructions, paying attention to the dots especially ;) (you'll
understand in a while). Although the title says "Oracle 8i on RH
7.1", it worked with RH 7.2 for me (as usual -- YMMV).
Kudos go to Thomas Flyer (for the web page above) -- thanks.
Short summary:
1. I've got an Athlon PC (800MHz/256MB/30GB), a decent one. Full
install of RH7.2 (just because I'm lazy + I've got a largish HDD).
2. IBM's JDK 1.1.8 installed.
3. compat-glibc, compat-libs, compat-egcs installed
4. CRITICAL -- make sure the following gets executed before you
install (place it in .bash_profile or profile for your shell):
export LD_ASSUME_KERNEL=2.2.5
. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
Did I mention the dot? :))) I didn't notice it at first (I like
fonts pretty small), and it cost me two hours of useless
installation. Having the script SOURCED is crucial!
5. Check whether you have the following env. variables:
$ echo $LD_ASSUME_KERNEL
2.2.5
$ echo $LDEMULATION
elf_i386_glibc21
Then safely run the 'runInstall' script.
6. I also had the error with ins_ctx.mk -- I applied the
workaround from the Thomas' web page and it worked.
7. Strangely enough, I didn't have to apply the 'glibc-stubs'
patch; everything worked fine without it.
8. Then I changed the sys password, created a user, imported my
database, checked it -- everything is fine!
Good luck in your struggle!
Best regards,
Greg

Sun Ray error when connecting to Oracle VDI - No Kiosk Sessions Available

When the Sun Ray DTUs go to connect to the Oracle VDI cluster at times they will throw the error "Error starting Kiosk session: No Kiosk accounts configured." We have tried going through the steps to confirm that the Kiosk sessions are configured on the two secondary hosts but the problem persists. When the Sun Ray DTUs do connect they will work for a while and then when left idle for a period of time will loose their connection and be unable to restart the connection with the error mentioned. The Screen Blanking option on the Sun Ray DTUs is set to "0" to prevent them from going into power-save mode but this makes no difference. The Sun Ray DTUs are all updated with the latest GUI firmware and there are no custom options set in the Sun Ray Session Servers.
The thing that bothers me the most is I have not seen any error messages in the logs. I will post up the logs as links in a follow-up post.
Has anyone had any similar issues while connecting with a Sun Ray DTU?
Currently we are running Oracle VDI 3.2.1 on the cluster.
Here are the commands we used to reset the Sun Ray Kiosk accounts:
# /opt/SUNWkio/bin/kioskstatus -c
# /opt/SUNWkio/bin/kioskuseradm status
# /opt/SUNWkio/bin/kioskuseradm delete
# /opt/SUNWkio/bin/kioskuseradm create -l utku -g utkiosk -i auto -u –c

I was trying to transfer data from oracle to sql server 2008 on a daily basis.
I have very hard time connecting to oracle from ssis package on windows server 2008. I am almost dead and cannot find any help. i was able to connect to oracle using import/export 64 bit feature of SQL Server 2008 using Oracle provider for OLEDB. But I am not sure why the same does not work with BIDS?
Here's the environment info:
1. Oracle Client 10g
2. SQL Server 2008
3. Windows Server 2008
Appreciate your help. Please save me.
Thanks,

SAP ECC6.0 installation with Oracle RAC

Hi Expert,
Current we working on SAP ECC6.0 installation with Oracle 10G RAC on AIX 5.3. The RAC are running on two nodes (servers). And we are using GPFS filesystem (not running on HACMP).
Overall we had completed the Oracle RAC installation (CRS+RDBMS) and tested the oracle failover and it work find. Now we want to start with the SAP installation (with HA). In the SAP installation documentation, it did request to create a virtual hostname on the node and execute the sapinst scripts with below command line.
#./sapinst SAPINST_USE_HOSTNAME=ascs00
But if we are running on Oracle RAC + GPFS do we need to specify the virtual hostname? If not, which hostname i should use to install the HA for SAP? Please advice.
Regards.

And then I'd continue with the documentation at:
SAP on Oracle => SAP on Oracle Real Application Clusters (RAC)
There you can find several installation guides for windows/UNIX/Linux

Server log shows error and warning 108 & 1085 every 5 minutes. Faile dto apply changes to software installation settings.

Event: 108
Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%2147746153
Event: 1085
Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
This errors have been happening a long while and do not appear to be having any effects on our end users. However, they are making
it very hard to sift through our log files as you could imagine! This DC is windows 2008 r2.
If there is any other information needed, let me know. Thanks!

In addition you can debug the software installation Policy easily.
GPO Troubleshooting
Also you can use the ADM/ADMX for GPO related issues (GPO DEBUG LOGGING).
http://www.gpoguy.com/FreeTools/FreeToolsLibrary/tabid/67/agentType/View/PropertyID/85/Default.aspx
http://www.gpoguy.com/FreeTools/FreeToolsLibrary/tabid/67/agentType/View/PropertyID/84/Default.aspx
Use this tool for registry key change.
http://www.gpoguy.com/FreeTools/FreeToolsLibrary/tabid/67/agentType/View/PropertyID/87/Default.aspx
I have tested all the above tools and all are working fine.
Best regards Biswajit Biswas Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin

Avertissement:"Echec de l'installation d'oracle cluster Registry (ORC)"

Hi,
Where I'am installing Oracle 10g, I received the following Avertissement:"Echec de l'installation d'oracle cluster Registry (ORC)".When i clicked OK the installation continue.Please can some
explain me what is the problem?
Thanks
Edited by: user12295522 on 1 déc. 2009 10:55

Without more information it is hard to help ...Even harder without any information about OS and database version (10g is an Oracle marketing label and no version).
Werner

Installation of Oracle Interim patches (CPU) prior to upgrade to Oracle 10g

Hello Gurus,
We will be upgrading our Oracle 9i database to Oracle 10G. One of the requirements is to have version Oracle 10.2.0.2 and may need to apply the CPUJAN2008 interim patches. My question is would it be safe to pre-install everything (Oracle Patch set + CPUJAN2008) before I do the upgrade?
Best rgds,
Jun

Hi,
A dicussion about similar question can be found on the following thread:
Re: Oracle 10g Problem
you have to check the last posts

Installation of Oracle VDI 3.4.1 fails at applying the Sun Ray patch

Similar Messages

Maybe you are looking for