Installation of Oracle Interim patches (CPU) prior to upgrade to Oracle 10g

Hello Gurus,
We will be upgrading our Oracle 9i database to Oracle 10G. One of the requirements is to have version Oracle 10.2.0.2 and may need to apply the CPUJAN2008 interim patches. My question is would it be safe to pre-install everything (Oracle Patch set + CPUJAN2008) before I do the upgrade?
Best rgds,
Jun

Hi,
A dicussion about similar question can be found on the following thread:
Re: Oracle 10g Problem
you have to check the last posts

Similar Messages

Oracle 8.1.7.2.1 upgrade to Oracle 9

Oracle 8.1.7.2.1 upgrade to Oracle 9
I'm doing a manual migration to Oracle 9
When I do a shutdown immediate, and use the datafiles to do a clone, I find the database is not consistent when I do a Startup Migrate.
Is this a problem with this version of Oracle 8? Startup migrate will not let me do a open resetlogs...anyone got any suggestions thanks

Jeremy
From your question
- "Is this a problem with this version of Oracle 8? Startup migrate will not let me do a open resetlogs" -
what I guess you are doing is after cloning, you have tried starting Oracle using the same old Oracle 8.1.7 home. You need to make sure that that you change your oracle home to the new 9i home after you have cloned your files.
Also ensure that all required parameters are changes in the initialisation parameter (e.g COMPATIBLE) and those that relate to directories have changed to new. Also that all orace ENV (ORACLE_HOME, PATH, ORA_NLS33, LD_LIBRARY_PATH) point to the new 9i home.
Then try the STARTUP MIGRATE and run the upgrade script.

Problem of Interim patches(8290549) of oracle 9.2.0.8

Hi,
I am facing a problem which is oracle interim patches of oracle 9.2.0.8.
When I performed opatch apply, I get the message as below:
OPatch encounters the following issues during file patching:
The following java archives had problems with being patched:
1.      osdadmin.jar
        [ object: AdminPasswdField.class ]
2.      ultrasearch_midtier.jar
        [ object: InvalidInputException.class ]
3.      CDC.jar
        [ object: ChangeTable.class ]
4.      ultrasearch_midtier.jar
        [ object: IsearchResBun.class ]
5.      ultrasearch_midtier.jar
        [ object: AdminUtil.class ]
6.      osdadmin.jar
        [ object: Root$RootServerList.class ]
7.      osdadmin.jar
        [ object: Root.class ]
8.      CDC.jar
        [ object: AdvanceChangeSet.class ]
9.      qsma.jar
        [ object: QsmaDataReports.class ]
10.     qsma.jar
        [ object: QsmaFileManager.class ]
11.     CDC.jar
        [ object: SubscriptionHandle.class ]
12.     ultrasearch_midtier.jar
        [ object: AdminObject.class ]
13.     qsma.jar
        [ object: QsmaDataManager.class ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT restore any updates that have been performed to this point. It WILL NOT update the inventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
      Metalink Note 312767.1 How to rollback a failed Interim patch installation.
Do you want to STOP?
If I choose N, I get opatch verification fail which is opatch failed.
After that I enter opatch lsinventory to check the opatch result, I get this:
Oracle Interim Patch Installer version 1.0.0.0.57
Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home           : /oracle_origlog/oracle/ID1/920_32
Oracle Home Inventory : /oracle/ID1/920_32/inventory
Central Inventory     : /oracle/ID1/oraInventory
   from               : /etc/oraInst.loc
OUI location          : /oracle/ID1/920_32/oui
OUI shared library    : /oracle/ID1/920_32/oui/lib/linux/liboraInstaller.so
Java location         : /oracle/ID1/920_32/jre/1.4.2/bin/java
Log file location     : /oracle_origlog/oracle/ID1/920_32/.patch_storage/<patch ID>/*.log
Creating log file "/oracle/ID1/920_32/.patch_storage/LsInventory__04-23-2009_16-22-22.log"
Result:
Installed Patch List:
=====================
1) Patch 8290549 applied on Thu Apr 23 15:41:36 SGT 2009
      [ Base Bug(s): 6787081 5933477 6375910 6079599 6647071 8290638 6117049 4115449 6690077 7154115 6639973 6066116 5149865 7592365 7127618 5490859 5744161 6079582 5839764 5722472 5605370 6769003 4609147 5089244 7154111 4969005 4683638 6521027 6654193 5726053 5754150 5631915 5526018 7120509 6053580 5917099 4970079 2701372 2855117 6826554 5517051 7335157 6057120 6451637 5080775 6120177 6613049 5965170 5116414 8290549 6862814 5514908 6529567 5964709 5188321 4157520 6444045 6646842 5901910 5057695 6395038 6864197 6042409 5849054 6404861 5703297 6020552 6404447 6703834 7375695 4334992 5558878 6350567 5901875 7576801 6493035 6319169 4057920 5369855 5745084 5345437 6619946 6453643 6864082 4088156 5372831 5491035 6954722 5527732 6055396 5631836 ]
OPatch succeeded.
So it means I have successfully patching the interim patches to the system???
Kindly please help.
Thanks,
Nancy

Hi Rich,
Output of opatch lsinventory is as below:
Oracle Interim Patch Installer version 1.0.0.0.57
Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home           : /oracle_origlog/oracle/ID1/920_32
Oracle Home Inventory : /oracle/ID1/920_32/inventory
Central Inventory     : /oracle/ID1/oraInventory
   from               : /etc/oraInst.loc
OUI location          : /oracle/ID1/920_32/oui
OUI shared library    : /oracle/ID1/920_32/oui/lib/linux/liboraInstaller.so
Java location         : /oracle/ID1/920_32/jre/1.4.2/bin/java
Log file location     : /oracle_origlog/oracle/ID1/920_32/.patch_storage/<patchID>/*.log
Creating log file "/oracle/ID1/920_32/.patch_storage/LsInventory__04-24-2009_14-54-11.log"
Result:
Installed Patch List:
=====================
1) Patch 8290549 applied on Thu Apr 23 15:41:36 SGT 2009
      [ Base Bug(s): 6787081 5933477 6375910 6079599 6647071 8290638 6117049 4115449 6690077 7154115 6639973 6066116 5149865 7592365 7127618 5490859 5744161 6079582 5839764 5722472 5605370 6769003 4609147 5089244 7154111 4969005 4683638 6521027 6654193 5726053 5754150 5631915 5526018 7120509 6053580 5917099 4970079 2701372 2855117 6826554 5517051 7335157 6057120 6451637 5080775 6120177 6613049 5965170 5116414 8290549 6862814 5514908 6529567 5964709 5188321 4157520 6444045 6646842 5901910 5057695 6395038 6864197 6042409 5849054 6404861 5703297 6020552 6404447 6703834 7375695 4334992 5558878 6350567 5901875 7576801 6493035 6319169 4057920 5369855 5745084 5345437 6619946 6453643 6864082 4088156 5372831 5491035 6954722 5527732 6055396 5631836 ]
OPatch succeeded.
Thanks for your reply.
BR,
Nancy

Warnings/Errors after interim patch oracle processing

Hello,
After I finished the interim patch procedure (10084982 file) in an oracle database at the finish of that patch procedure it show some lines with warnings...
Could you tell me if these errors are of concern?
INFO:Execution of ' Command and arguments of pre/post scripts is restricted to be viewed in log file ':
Return Code = 0
INFO:Finish the Apply postScript at Sun Jan 23 23:44:24 GMT 2011
INFO:Got online patch property as NULL for the node
INFO:
The local system has been patched and can be restarted.
INFO:Finish applying patch to local system at Sun Jan 23 23:44:24 GMT 2011
INFO:--------------------------------------------------------------------------------
INFO:The following warnings have occurred during OPatch execution:
INFO:1) OUI-67620:Interim patch 10084982 is a superset of the patch(es) [ 8559467 ] in the Oracle Home
INFO:--------------------------------------------------------------------------------
SEVERE:OUI-67204:OPatch Session completed with warnings.
INFO:Finishing ApplySession at Sun Jan 23 23:44:24 GMT 2011
INFO:Total time spent waiting for user-input is 12 seconds. Finish at Sun Jan 23 23:44:24 GMT 2011
Best regards,
João Dimas - Portugal

Hello SBK,
Yeah, I know that, after I finished this interim patching process I had done it, I had checked the inventory ($ORACLE_HOME/OPatch/opatch lsinventory) and the output show a big list of bugs fixed which belongs to the new interim patch applied 10084982, as you can see follow:
Patch 10084982     : applied on Sun Jan 23 23:44:21 GMT 2011
Unique Patch ID: 12993853
   Created on 04 Oct 2010, 00:36:22 hrs PST8PDT
   Bugs fixed:
     10084982, 9189070, 9747153, 7497640, 7361418, 9758199, ...
The interim patch number 8559467 is the old interim pach oracle that was already installed and I needed/wanted to update it to the new one, to the latest version, which is the interim patch number 10084982.
This is for windows X64 platform!
Best regards,
João Dimas - Portugal

Applying Oracle 11g patches on Windows 2008

I'm not able to apply patches and below is the messages. Please help me. Thanks,
C:\oracle\SLM\112\OPatch> %ORACLE_HOME%\OPatch\opatch apply Z:\Oracle_Patches\12714463
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 11.2.0.1.5
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Oracle Home       : C:\oracle\SLM\112
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.1.5
OUI version       : 11.2.0.1.0
OUI location      : C:\oracle\SLM\112\oui
Log file location : C:\oracle\SLM\112\cfgtoollogs\opatch\opatch2011-11-01_
05PM.log
Patch history file: C:\oracle\SLM\112\cfgtoollogs\opatch\opatch_history.tx
ApplySession applying interim patch '12714463' to OH 'C:\oracle\SLM\112'
Running prerequisite checks...
Patch 12714463: Optional component(s) missing : [ oracle.rdbms, 11.2.0.2.0
oracle.rdbms.dbscripts, 11.2.0.2.0 ] , [ oracle.rdbms.plsql, 11.2.0.2.0 ]
racle.ntoledb.odp_net_2, 11.2.0.2.0 ] , [ oracle.ctx, 11.2.0.2.0 ] , [ ora
bms.rsf.ic, 11.2.0.2.0 ] , [ oracle.rdbms.oci, 11.2.0.2.0 ] , [ oracle.rdb
11.2.0.2.0 ] , [ oracle.has.rsf, 11.2.0.2.0 ] , [ oracle.has.crs, 11.2.0.
, [ oracle.sysman.console.db, 11.2.0.2.0 ] , [ oracle.sysman.oms.core, 10.
3 ] , [ oracle.rdbms.dv, 11.2.0.2.0 ] , [ oracle.network.rsf, 11.2.0.2.0 ]
racle.ldap.rsf.ic, 11.2.0.2.0 ] , [ oracle.ldap.rsf, 11.2.0.2.0 ] , [ orac
olap, 11.2.0.2.0 ] , [ oracle.precomp.rsf, 11.2.0.2.0 ] , [ oracle.precomp
n, 11.2.0.2.0 ] , [ oracle.precomp.lang, 11.2.0.2.0 ] , [ oracle.rdbms.rma
2.0.2.0 ] , [ oracle.rdbms.util, 11.2.0.2.0 ] , [ oracle.odbc.ic, 11.2.0.2
[ oracle.ntoledb, 11.2.0.2.0 ] , [ oracle.nlsrtl.rsf, 11.2.0.2.0 ] , [ or
lsrtl.rsf.ic, 11.2.0.2.0 ] , [ oracle.xdk.rsf, 11.2.0.2.0 ] , [ oracle.ora
bscripts, 11.2.0.2.0 ] , [ oracle.usm.deconfig, 11.2.0.2.0 ] , [ oracle.ha
on, 11.2.0.2.0 ] , [ oracle.sdo.locator, 11.2.0.2.0 ] , [ oracle.usm, 11.2
] , [ oracle.rdbms.deconfig, 11.2.0.2.0 ] , [ oracle.has.db, 11.2.0.2.0 ]
racle.ntoramts, 11.2.0.2.0 ] , [ oracle.has.deconfig, 11.2.0.2.0 ] , [ ora
s.common.cvu, 11.2.0.2.0 ] , [ oracle.has.cvu, 11.2.0.2.0 ] , [ oracle.sys
ugin.db.main.repository, 11.2.0.2.0 ]
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 12714463: Required component(s) missing : [ oracle.rdbms.rsf, 11.2.0
ApplySession failed during prerequisite checks: Prerequisite check "CheckA
ble" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
Edited by: Hemanta Basuray on Nov 2, 2011 7:51 AM

Hi,
What is your exact DB release? This patch belongs to Oracle 11.2.0.2
Best regards,
Orkun Gedik

Can't patch mobile 6 client package to Oracle Lite 10.3

hi,
I installed Oracle lite 10.3 successfully, and try to install oracle client patch for mobile 6. I do this according to the readme,but failed,the message says,
Oracle Interim Patch Installer version 1.0.0.0.57
Copyright (c) 2007 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : d:\olite10g_1
Oracle Home Inventory : D:\olite10g_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\olite10g_1\oui
OUI shared library : D:\olite10g_1\oui\lib\win32\oraInstaller.dll
Java location : "D:\olite10g_1\jre\1.4.2\bin\java.exe"
Log file location : d:\olite10g_1/.patch_storage/<patch ID>/*.log
Creating log file "D:\olite10g_1\.patch_storage\6344826\Apply_6344826_03-10-2008_10-13-37.log"
ERROR: OPatch failed during pre-reqs check.
any help? thank u

Ok, I finally found it.....
Oracle Database Lite Administration and Deployment Guide Release 10.3 (E12089-02)
7.4.3.1 Enable a Platform for Your Mobile Client
Not all of the possible platforms are enabled on the Mobile client setup screen. To enable a platform for your client device, do the following:
On the Mobile Devices screen, click Platforms.
On the Platforms screen in the Search pulldowns, select the language and either Disabled or All and click Go.
Select the platform name that you want to enable.
Enable the device by selecting Yes in the Enable pulldown.
Click OK. The device is now enabled and will be visible in the client setup screen.
=====================================================================
I was on the Platform screen before, but missed the "Enabled" setting under Search. I looked at the screen and saw only the enabled list, and assumed this was 'all' of the platforms....
Once I switched the search setting from "Enabled" to "All" I saw my disabled SQLite options.
7.4.3.1 was under 7.4.3 Extend or Create a Custom Platform. Wasn't trying to do either of these, so never looked under there before. Only ran into it when I was going to attempt to create a custom SQLite platform.
I thought it was just a bad setting somewhere.... Just couldn't find where....
Thanks for all who looked at my question and userBDBDMS-Oracle for trying to help.

Interim patch vs database patch

Hi,
I want to know the exact difference between Interim patch and database patches.
First of all my understanding is that ,Database patches are applied for some ORA-related errorrs as suggested by document id.where as interim patches are applied on ORA_HOME.
plz correct me if i am wrong?and give me complete details about them.
Also i want to know,is there any database patch for ORA-1555 error?
Thnx

791902 wrote:
Hi,
I want to know the exact difference between Interim patch and database patches.
First of all my understanding is that ,Database patches are applied for some ORA-related errorrs as suggested by document id.where as interim patches are applied on ORA_HOME.
plz correct me if i am wrong?and give me complete details about them.All patches are applied on binaries i.e. ORACLE_HOME and some patches also have some scripts to be run to update data dictionaries.
For interim patch explanation please refer to MOS :
Oracle Data Server Interim Patch Installation (OPatch) [ID 189489.1]
Also i want to know,is there any database patch for ORA-1555 error?ORA-155 occurs due to undo tablespace.
check MOS note :
TROUBLESHOOTING GUIDE (TSG) - ORA-1555 [ID 467872.1]
You can also check :
http://www.dba-oracle.com/t_ora_01555_snapshot_old.htm
Regards
Rajesh
Edited by: Rajesh on Sep 7, 2010 4:29 PM

Run interim patch 5689908

OS: Linux
DB: 10.1.0.5.0
I am installing interim patch # 5689908.
I shutdown the database.
oracle@test:ORACLE_HOME/OPatch> ./opatch apply
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright (c) 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : $Oracle Home
Oracle Home Inventory : $Oracle Home /inventory
Central Inventory : /opt/oracle7/oraInventory
from : /etc/oraInst.loc
OUI location : $Oracle Home /oui
OUI shared library : $Oracle Home /oui/lib/linux/liboraInstaller.so
Java location : $Oracle Home /jre/1.4.2/bin/java
Log file location : $Oracle Home /.patch_storage/<patch ID>/*.log
The patch directory area must be a number.
ERROR: OPatch failed because of problems in patch area.
oracle@test:$Oracle Home /OPatch> ls -ltr
-rw-r--r-- 1 oracle7 oinstall 0 2006-05-01 16:29 opatch.ini
drwxr-xr-x 5 oracle7 oinstall 280 2007-01-08 00:39 5689908
-rw-r--r-- 1 oracle7 oinstall 14256 2007-01-15 23:10 opatch.pl
-rw-r--r-- 1 oracle7 oinstall 6696 2007-01-15 23:10 opatch.bat
-rwxr-xr-x 1 oracle7 oinstall 7270 2007-01-15 23:10 opatch
-rw-r--r-- 1 oracle7 oinstall 19109 2007-01-15 23:10 emdpatch.pl
-rw-r--r-- 1 oracle7 oinstall 2410 2007-01-15 23:10 README.txt
drwxr-xr-x 2 oracle7 oinstall 80 2007-01-18 09:31 jlib
drwxr-xr-x 2 oracle7 oinstall 184 2007-01-18 09:31 docs
drwxr-xr-x 2 oracle7 oinstall 312 2007-01-18 09:31 perl_modules
I installed and run interim patch 5689908 under $Oracle Home /OPatch.
Is it ok?
Do I need to install & run patch 5689908 under ORACLE_HOME?

oracle@sac: ORACLE_HOME/OPatch> ./opatch lsinventory
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright (c) 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
Oracle Home : ORACLE_HOME
Oracle Home Inventory : ORACLE_HOME/inventory
Central Inventory : /opt/oracle/oraInventory
from : /etc/oraInst.loc
OUI location : ORACLE_HOME/oui
OUI shared library : ORACLE_HOME/oui/lib/linux/liboraInstaller.so
Java location : ORACLE_HOME/jre/1.4.2/bin/java
Log file location : ORACLE_HOME/.patch_storage/<patch ID>/*.log
Creating log file " ORACLE_HOME/.patch_storage/LsInventory__01-23-2007_12-23-37.log"
Result:
Installed Patch List:
=====================
1) Patch 5689908 applied on Tue Jan 23 09:46:53 PST 2007
[ Base Bug(s): 5406923 5689908 4359124 4925103 4939157 5094098 4587572 5648102 5222931 5057964 5227879 5347751 5055442 4661844 4152843 4691191 5637094 5222032 4754900 4331689 5242647 5458543 5417371 4671216 4903532 5029950 5464895 5029952 5650178 5029954 5225797 4402808 4047969 4554284 4874628 4966417 4871035 5091108 5401921 4458415 4605877 4900129 5092688 5226235 5095648 4751932 4449900 4768040 5490845 5049074 5490935 4348230 5239126 5049077 5644862 ]

Oracle 10.2.0.4 Patching Process - CPU vs Interim Patches

Hi everyone,
We are getting ready to upgrade our AIX 5.2 - 64bit Oracle 10.2.0.2 systems to Oracle 10.2.0.4.
I noted that there was also a single CPU patch available (CPUOct2008_p7375644_10204_AIX5L.zip), as well as a large list of interim patches for 10.2.0.4.
I was wondering what other people do regarding their patching strategy for 10.2.0.4.
eg: After you complete your 10.2.0.4 upgrade, do you:
1. Apply the CPU patch first and then all the interim patches
2. Apply all the interim patches first and the the CPU patch
3. Apply the CPU patch only
4. Apply the interim patches only
5. Its all too hard, so I don't apply any CPU or interim patches ... I hope for the best.
6. Migrate to MaxDB ... its much easier to patch.
Interested in your feedback.
Cheers
Shaun
Edited by: Shaun on Nov 28, 2008 3:34 AM

Hi Fidel,
Fidel Vales wrote:
Oracle changed the CPU patches in 10.2.0.4
Now they are more "granular". it is divided in "molecules"
that way it is possible to install only one "part" of the CPU if there is a conflict.
I was aware of Oracles new approach for 10.2.0.4 of using the molecule patch concept. I still feel uneasy with it given their past track record of patch conflicts.
For that reason, I'd install first all patches and then the CPU.
Have you done this? Has anyone done this? I wouldn't mind hearing from someone that has.
Regarding MaxDB, sorry I never used it
Your missing out on something wonderful. Great database.
Hows this ... I'll apply all of the interim patches, and then the CPU patch on one of our project boxes early next week, and report back if there were any conflicts or issues.
Cheers
Shaun

Applying interim patches to Oracle 10.2.0.2

Hi,
After the CRM upgrade to CRM 2007 on oracle 10.2.0.2 on soalris 10, I need to apply interim patches to oracle 10.2.0.2.
As I am new to it, please any one send me the step by step procedure to do so. I have already taken a backup.
Regards
M Kumar

Hi,
You should read the notes, all is explained on them.
First you MUST download all the patches from SAP note 871096
Then you also read the note, where is explained how to install the patches:
Patch installation with OPatch
To install Oracle patches for Oracle Release 10.2.0.2 or 10.2.0.4, use
the Opatch version of patch 4898608 only. This is available on SAP
Service Marketplace.
The use of the OPatch version of patch 6880880 (particularly in
connection with MOPatch) is currently not released.
In this case, see OPatch Note 839182.
Patch installation with MOPatch
You must apply a relatively large number of patches for Oracle Release
10.2.0.2. Information about the patch installation using MOPatch, see
Note 1027012.
Of course, this little excerpt of the note point to other notes that you should read to get more details.

Upgrade Oracle to 10.2.0.2 and apply Interim patches

Hello!
I have currently installed SOLMAN with Oracle 10.2.0.1 on Solaris-Unix.
Do I need execute upgrade to ORA 10.2.0.2 and apply the Interim Patches?
Where are these files located?
Thank you very much!
regards
Thom

Hello Thom,
yes, you have to apply 10.2.0.2 and all mandatory patches. All details can be found in SAP note 871096.
Regards
Martin

Error installing interim patches - Oracle 10 - 10.2.0.4.0

Hi experts!
We are currently installing an ERP 6.0 system on SOLARIS 10. After installing Oracle 10.2.0.4.0 and respective patch set, the follpwing error is obtained while trying to install interim patches. Actually the first one was installed without problems...but starting from the second one....the bellow error is logged.
This is the log in /oracle/DB2/102_64/cfgtoollogs/mopatch:
(A) Comparing object file "/oracle/SID/102_64/MOPatch/mopatch-IJaqhf/5561212/files/lib/libserver10.a/kkj.o" to the object entry "kkj.o" inside the .a file "/oracle/SID/
102_64/lib/libserver10.a"
2 files are identical? TRUE
Cleaning up "/oracle/SID/102_64/.patch_storage/verify/jar" under "/oracle/SID/102_64", "verify".
Cleaning up "/oracle/SID/102_64/.patch_storage/verify/archive" under "/oracle/SID/102_64", "verify".
Files check OK: Files from Patch ID 5561212 are present in Oracle Home.
The local system has been patched and can be restarted.
OPatch succeeded.
Cannot clean up unpacked patch. Continuing.
Processing patch "p5561212_10204_Solaris-64.zip"...done.
Processing patch "p5747462_10204_Solaris-64.zip"...(2 of 47)
Processing patch "p5747462_10204_Solaris-64.zip"...failed.
Reason: Cannot clean up temporary patch staging directory.
Could you please let know how to solve this issue? What is the "temporary patch staging directory" the mopatch is not able to clean up? Btw...the process is being run under oraSID user an permissions seems to be ok.
Thanks and regards

Hi Diego,
Processing patch "p5747462_10204_Solaris-64.zip"...failed.
Reason: Cannot clean up temporary patch staging directory.
Are the permissions for these zip files and the directory containing this file OK ?
I think OPatch/MOPatch program is trying to access the directory /oracle/SID/102_64/.patch_storage, once try to verify the permissions of '.patch_storage'
Thanks

Interim patch installation

i have 9.2.0.5 (oracle ) and HP-UX 11i (o.s.).
i want to install interim patches
can you explain how to install?
pls mention the steps clearly.
with regards
sanjay kumar

Sanjay,
Please refer this question to the general Database forum. Thanks!

Error during oracle 91 patch installation on ecc 5.0 installation

Hi All,
I am installating oracle 9 patches on HPUX 11.The following is the error
"error in invoking target sdo_on of make file /oracle/GMD/920_64/rdbms/lib/ins_rdbms.mk"....p
Here is the installActions2007-06-29_03-05-20PM.log content:
Start output from spawned process:
Make: Don't know how to make /oracle/GMD/920_64/rdbms/lib/kxmwsd.o.
Stop.
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'sdo_on' of makefile
'/oracle/GMD/920_64/rdbms/lib/ins_rdbms.mk'. See
'/oracle/GMD/oraInventory/logs/installActions2007-06-29_03-05-20PM.log'
for details.
Exception Severity: 1
Here is the content of make.log
Make: Cannot open ins_rdbms.mk. Stop.
ar: could not open /oracle/GMD/920_64/rdbms/lib/kciwcx.o
Make: Cannot open ins_rdbms.mk. Stop.
ar: could not open /oracle/GMD/920_64/rdbms/lib/kxmwsd.o
Make: Cannot open ins_rdbms.mk. Stop.
ar: /oracle/GMD/920_64/rdbms/lib/libknlopt.a does not exist
ar: could not open /oracle/GMD/920_64/rdbms/lib/kkpoban.o
Observation: There is no archive library file named libknlopt.a under
/oracle/GMD/920_64/rdbms/lib/ which is referred in script and
hence its giving error while making object file kxmwsd.o.
please help me

Hi All,
I am installating oracle 9 patches on HPUX 11.The following is the error
"error in invoking target sdo_on of make file /oracle/GMD/920_64/rdbms/lib/ins_rdbms.mk"....p
Here is the installActions2007-06-29_03-05-20PM.log content:
Start output from spawned process:
Make: Don't know how to make /oracle/GMD/920_64/rdbms/lib/kxmwsd.o.
Stop.
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'sdo_on' of makefile
'/oracle/GMD/920_64/rdbms/lib/ins_rdbms.mk'. See
'/oracle/GMD/oraInventory/logs/installActions2007-06-29_03-05-20PM.log'
for details.
Exception Severity: 1
Here is the content of make.log
Make: Cannot open ins_rdbms.mk. Stop.
ar: could not open /oracle/GMD/920_64/rdbms/lib/kciwcx.o
Make: Cannot open ins_rdbms.mk. Stop.
ar: could not open /oracle/GMD/920_64/rdbms/lib/kxmwsd.o
Make: Cannot open ins_rdbms.mk. Stop.
ar: /oracle/GMD/920_64/rdbms/lib/libknlopt.a does not exist
ar: could not open /oracle/GMD/920_64/rdbms/lib/kkpoban.o
Observation: There is no archive library file named libknlopt.a under
/oracle/GMD/920_64/rdbms/lib/ which is referred in script and
hence its giving error while making object file kxmwsd.o.
please help me

Oracle Critical Patch Update July 2009 for Oracle BEA Releases

Hi All,
Researching in metalink about CPU's for WLS 9.1 I found Oracle Support Note #835668.1. Table 9 of this document
lists minimum product requirements for WebLogic server.
According to this table WLS 9.1 should have a minimum version of 9.2MP3.
I am confident that WLS 9.1 and WLS 9.2 are completely different WLS versions and there is no upgrade path from WLS 9.1 to WLS 9.2.
Is this table misprinted or is it required to replace all WLS 9.1 installations with WLS 9.2 installations?
What is this table trying to indicate?
Please assist.
It would be very helpful.
Thanks.

Oracle Critical Patch Update fix a list of bugs , oracle will release CPU in every three months interval.
you need to click the link which oracle has sent.
then choose your database version===then select the patch number===then on metalink download the patch
with patch there is read me file which tell you how to apply the patch on the database.
Thanks
Regards,
Taj

Installation of Oracle Interim patches (CPU) prior to upgrade to Oracle 10g

Similar Messages

Maybe you are looking for