Installation of SB Live! 24-bit failure, windows Code 10 error given, any thoug
Well I almost got my card succesfully installed, when using the Creative installer, everything seems fine, but when I restart the computer, instead of SB Li've 24-bit listed in the device manager, it just says Multimedia Audio Controller with a ! beside it, so I go the old fashiond route, install the driver only with windows doing the file copying, and at the last part of the install this is the message I get:
There was a problem installing this hardware:
Sound Blaster Li've! 24-bit
This device cannot start (Code 0)
Any ideas folks(Creative included)
also I disabled the DEP fuction in SP2
I have this exact same problem!!! Recently I was using my compaq presario laptop to play mp3's via windows media player with the external li've dri've plugged directly into my computer and a microsoft wireless mouse plugged in via an unpowered usb hub. (Targus) I also had a notepal by coolermaster plugged in through the hub. The card popped a few times in the hour and then suddenly popped loudly and shut off. I had to unplug my mouse to get it working again. It wouldn't work in the usb slot the hub was plugged into although the hub worked fine when plugged into that slot and so did my smaller usb mouse. Strange. This happened twice. I turned the card back on, it started up was recognized by my computer and played fine for a while and then eventually repeated the same process. I don't think I should have to have a powered hub to fix this problem. Anyone else experienced this?
Similar Messages
-
Installation of Oracle Client 32 bit on Windows 64 bit
Hi ,
I'm trying to install the 32 bit Oracle client (release 11.2.0) on a Windows server with 64 bit (Microsoft Windows Server 2008 R2 Standard, Service Pack 1).
It's my understanding that this is supported and should work. However, the 64 bit Oracle client (release 11.2.0) is already installed on the server.
We need the 32 bit client since an older application requires this.
The GUI for the install of the client starts fine - but when the step "Finish installation" the GUI suddenly disappeares. The logfile of the installation ends
with
INFO: Setting the value for INSTALL_TYPE variable
INFO: Variable "INSTALL_TYPE" wird auf "InstantClient" festgelegt. Der Wert wurde von der Befehlszeile empfangen.
INFO: adding the variable oracle_install_NoMigration to command line args table
INFO: adding the variable oracle_install_RACInstall to command line args table
INFO: adding the variable oracle_install_WindowsSystemDirectory to command line args table
INFO: Update the State machine to STATE_INIT_SESSION
INFO: Creating & Initializing the Session Interface Manager
INFO: Calling OiicInstallAPISession's prepareForInstallOperations
INFO: Do the iterator execution till Summary
INFO: Initialisieren des Installationsbestands
INFO: Einrichten des Installationsbestands
I'm executing the installation as a local admin - I've tried the installation with setting the compatibility mode to Windows 2000. No success at all :-(
Did I get it wrong that ths 32 bit client is certified with this windows version? Does anybody have experience with the same situation?
Any help will be appreciated!
Rgds
JanAre you using separate ORACLE_BASE directories ?
Oracle® Database
HTH
Srini -
Installation of 11i on 32-Bits OEL4 having linking error.
Hi,
I am trying to install 11i (11.5.10.2) on OLE 4.x 32-Bits, but having linking errors when adlnkoh.sh running. The log show following error message cat 10120907.log".
adlnkoh.sh started at Fri Oct 12 09:21:06 EDT 2012
logfile located in /ebs11i/oracle/visdb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
Errors while running adlnkoh.sh
There was an error while running the command - /ebs11i/oracle/visdb/9.2.0/temp/VIS_ebs11i40/adrun9i.sh APPS APPS
/ebs11i/oracle/visdb/9.2.0/appsutil/install/adlnkoh.sh: line 207: /ebs11i/oracle/visdb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Now the make log /ebs11i/oracle/visdb/9.2.0/install/make.log is showing following messages:
running genclntsh...
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.s /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.o
But when I check details about file kpudfo.o, it is showing 64-Bits, How come this file is 64-Bits when I am installing 32-Bits application?
[oracle@ebs11i40:/ebs11i]$ file /ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: ELF 64-bit LSB relocatable, AMD x86-64, version 1 (SYSV), not stripped
Please help me with this issue.
Thanks.There was an error while running the command - /ebs11i/oracle/visdb/9.2.0/temp/VIS_ebs11i40/adrun9i.sh APPS APPS
/ebs11i/oracle/visdb/9.2.0/appsutil/install/adlnkoh.sh: line 207: /ebs11i/oracle/visdb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instanceWhat version of gcc have you installed? Please make sure you are using the correct version (Perl Adcfgclone.pl dbTechStack Failed While Relink /usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to`dl_iterate_phdr@GLIBC_2.2.4' [ID 417605.1]).
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.s /ebs11i/oracle/visdb/9.2.0/rdbms/lib/ksms.o
But when I check details about file kpudfo.o, it is showing 64-Bits, How come this file is 64-Bits when I am installing 32-Bits application?
[oracle@ebs11i40:/ebs11i]$ file /ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o
/ebs11i/oracle/visdb/9.2.0/rdbms/lib/kpudfo.o: ELF 64-bit LSB relocatable, AMD x86-64, version 1 (SYSV), not stripped
Please help me with this issue.What is the output of "uname -m" command? -- Installing onto Linux And Receive error: Genclntsh: Failed To Link Libclntsh.So.10.1 [ID 340861.1]
Thanks,
Hussein -
How to Load soundfonts with Live 24-bit on Windows x
I have looked through all the apps available from creative for Windows x64 under the Li've 24-bit category but I cant find anything to load soundfonts. Is there any utils available I can download or a work around for this?
up..
-
Please help whit sound blaster 5.1 Live 16 bit in windows vi
Where do i find sound blaster 5. Li've! 6bit drivers for windows vista? i installed its driver from cd but that is only for win XP and i only hear the front speaker left and right ... what should i do ?
ok i found my directx program and opened it and did sound test and other tests and it says theres no problems found .
so this leads me back to my problem i stll get the error message saying that MY SOUND CARD CANNOT BE DETECTED ON MY SYSTEM . PLEASE MAKE SURE YOU SOUND CARD IS PROPERLY INSTALLED ...
i went to creative to do the autoupdate install so it would auto check my system and i get a error message saying theres components that are corrupted and it closes and does nuthing ..
and everytime i try to do an update i get the no sound card error message so im back to square ,
i have done everything i can possibly think of and also everything the techs told me to do nd this **bleep** still dont work and i still cant use any of the features that came on the disc (i.e.) diagnostics and others etc.etc.etc.
my only conclusion is i have a deffecti've sound card ..........unless someone can think of a miracle fix i dont see anything else it could be
Message Edited by theviper on -06-2005 :00 AM -
I am performing silent installation for a named instance of SQL Server 2008 Express edition on a Windows 7 machine. The installation fails with Exit Facility Code
1203 and Error Code -2068643839.
PFB the details:
Operating System : Windows 7 Professional edition Service Pack 1
System Type : 64-Bit Operating System
SQL Express Installer : SQL Server 2008 Express Installer 32-bit (compatible with 64-bit OS)
I browsed through the MSDN and other forums. The root cause of this issue has been stated as the Windows user is not an administrator or windows user does not have the rights to modify the Microsoft SQL Server folder inside the Program Files folder. I have
checked for this common issues and the windows user is an administrator and has the sufficient rights to modify the
C:\Program Files(x86)\Microsoft SQL Server folder.
Appreciate if anyone can provide pointers to resolve this issue.
PFB the contents of Summary.txt file:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-01-28 15:59:43
End time: 2014-01-28 16:01:03
Requested action: Install
Log with failure: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\sql_engine_core_inst_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22
Machine Properties:
Machine name: ********
Machine processor count: 4
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\ConfigurationFile.ini
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: DHLEASYSHIP
INSTANCENAME: DHLEASYSHIP
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\
NPENABLED: 1
PID: *****
QUIET: True
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: NT AUTHORITY\SYSTEM
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
X86: False
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0xB8A6B4FA
MSI log file location: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\sql_engine_core_inst_Cpu32_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Log\20140128_155901\SystemConfigurationCheck_Report.htmPFB the details from sql_engine_core_inst_Cpu32_1.log file:
=== Verbose logging started: 1/28/2014 16:00:53 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Release\x86\setup100.exe ===
MSI (c) (D8:20) [16:00:53:535]: Resetting cached policy values
MSI (c) (D8:20) [16:00:53:535]: Machine policy value 'Debug' is 0
MSI (c) (D8:20) [16:00:53:535]: ******* RunEngine:
******* Product: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (c) (D8:20) [16:00:53:535]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (D8:20) [16:00:53:535]: Grabbed execution mutex.
MSI (c) (D8:20) [16:00:53:536]: Cloaking enabled.
MSI (c) (D8:20) [16:00:53:536]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (D8:20) [16:00:53:536]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (08:30) [16:00:53:538]: Running installation inside multi-package transaction C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
MSI (s) (08:30) [16:00:53:538]: Grabbed execution mutex.
MSI (s) (08:94) [16:00:53:539]: Resetting cached policy values
MSI (s) (08:94) [16:00:53:539]: Machine policy value 'Debug' is 0
MSI (s) (08:94) [16:00:53:539]: ******* RunEngine:
******* Product: C:\Program Files (x86)\DHL\EasyShip v5.3\SQL Express\Express\x86\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (s) (08:94) [16:00:53:539]: Machine policy value 'TransformsSecure' is 0
MSI (s) (08:94) [16:00:53:539]: User policy value 'TransformsAtSource' is 0
MSI (s) (08:94) [16:00:53:539]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (08:94) [16:00:53:539]: Specified instance {B5153233-9AEE-4CD4-9D2C-4FAAC870DBE2} via transform :InstID01.mst;:InstName01.mst is already installed. MSINEWINSTANCE requires a new instance that is not installed.
MSI (s) (08:94) [16:00:53:539]: MainEngineThread is returning 1639
MSI (s) (08:30) [16:00:53:540]: User policy value 'DisableRollback' is 0
MSI (s) (08:30) [16:00:53:540]: Machine policy value 'DisableRollback' is 0
MSI (s) (08:30) [16:00:53:540]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (08:30) [16:00:53:540]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (08:30) [16:00:53:540]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (08:30) [16:00:53:540]: Restoring environment variables
MSI (c) (D8:20) [16:00:53:541]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (D8:20) [16:00:53:541]: MainEngineThread is returning 1639
=== Verbose logging stopped: 1/28/2014 16:00:53 === -
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
can you download a 32 bit installer for Photoshop elements 12 to install on a 64 bit system (windows 7). Thanks in advance
yes, if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!
I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly. -
During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.
"An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'". This is all followed by some more text and code HRESULT:0x80070005
Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
Anne MarieProbably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)
-
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
Has anyone not been able to get the iTunes installer to load properly and get a message like this: This iTunes installer is intended for 32 bit versions of windows. Please download and install 64 bit iTunes installer instead. I have tried repeatedly to get this to load, I have uninstalled iTunes completely and reinstalled and still get the same message. I have windows XP and a brand new ipod touch which I am trying to load.
Yes, it's come up a number of times. If you look to the right under "more like this", you'll find threads that may offer useful suggestions.
Regards. -
MAXDB installation fails for ABAP WAS trial on Windows 7, 64 bit machine
Hi Experts,
I downloaded the Trial ABAP WAS from SDN's download section. I am trying to install it on Windows 7 64 bit machine.
It.
It fails to execute: <...\NWASABAPTRIAL70206\MAXDBTOOLS\maxdb-studio-desktop-win-32bit-i386-7_8_01_16\SDBINST.exe>
It tries to execute for Windows 32 bit but the machin in 64 bit so it gives error.
DId anyone face such issue? How to resolve this for successful installation?
Regards,
DamanIn my Windows 7 64 bits the version with following link is ok.
[SAP NetWeaver AS ABAP 7.02 SP6 64-bit Trial|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/1048e401-ab3d-2e10-4d84-b9f27339c54b]
For me the maxdb studio in the archive is ok for install.
Edited by: Jerome Moutreux on May 3, 2011 8:13 AM -
when trying to download ipod reset utility for windows i get a message that the installer is intended for 32-bit version of windows. what can i do?
I assume you have tried everything here?
iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
It doesn't mention 1442, but the same troubleshooting applies.
It wouldn't hurt to also try another available USB port on your machine and another sync cable if possible.
Lastly, try restoring the iPod on another PC or Mac running iTunes.
If you know of somebody with a PC running Windows XP still, ask them if you can download the reset utility and use it to reset the Shuffle.
B-rock -
While installing latest version of iTunes error "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead" how to deal with it ?
Doublechecking. What's the filename of the installer you've been downloading? (The 32-bit installer is called iTunesSetup.exe, and the 64-bit installer is called iTunes64Setup.exe.)
Maybe you are looking for
-
Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4
Dear all we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error. EHP_INCLUSION.log
-
How to achieve Entity Bean methods ONLY by calling them from a Session Bean
Hi, I used a session bean as a business facade to a entity bean. In the session bean I achieve the entity bean with a jndiContext.lookup("java:comp/env/ejbEntityBean"). Now I am looking for a solution that it is only possible to call the entity bean
-
Hi there, Almost a year ago I purchased my first Apple computer, a 1.83ghz MacBook 13". At the time it was purely a personal purchase because although I needed to use Windows for work, I didnt see why I should have to put up with it any longer on my
-
ADOBE PLEASE FIX THIS SOFTWARE
I was considering purchasing this software but it is so buggy I cannot begin to express my frustration. Are we beta testers ? Why can't these issues get resolved. I have had the dreadful 0x0000020 error for 3 different projects now during the past da
-
I can not open a downloaded file from an e-mail or off the web w/o a file conversion box popping up.It shows options to open with msoffice word but I choose that and it opens with all the characters that are weird looking. There is also the issue whe