Installed new hard drive and whne Ipod synced I lost music
I recently added a slave drive for my music. When I synced my ipod it told me there were errors locating the files. I thought I said to delete them from itunes. Now when I look on my hard drive the music is gone. Did itunes actually delete something from my hard drive? If so where is it, how do you get to the recycling bin of a slave drive?
It has always been very basic to always maintain a backup copy of your computer for just this reason.
Use your backup copy to put evefrything back on your computer.
If for some reason you have failed to maintain a backup copy , not ggod, then you can transfer itunes purchases form an ipod: File>Transfer Purchases.
In some countries you can redownload some purchases:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Similar Messages
-
Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.
Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile -
Playlists Missing After Install New Hard Drive and Upgrade to Win 7
My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH! -
Windows 7 won't load after installing new Hard Drive and Recovery software
HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I had to install a new hard drive on my system and download itunes again. When I synced my ipod it duplicated a bunch of songs, how do I fix this problem?
wait until you reach the limit of five authorized machines. then, once a year, you will be able to deauthorize all machines, following which you can reauthorize those computers you currently use/have access to.
click here for more information. -
New hard drive and old ipod touch...I want my music back :{
My computer crashed 3 weeks ago ( I lost everything and had to install a new hard drive, so it's like a brand new computer) I read some instructions about this issue but I wasn't sure if i re download itunes and I am unsure what the steps are to get my itunes library back on my computer. Do I reinstall itunes? How do i sync my ipod to my computer? I just need plain old good help because I don't want tp lose everthing! Thanks! Also I am not the brightest with computer so please dumb it down for me...lol!!!
It has always been very basic to always maintain a backup copy of your computer for just this reason.
Use your backup copy to put evefrything back on your computer.
If for some reason you have failed to maintain a backup copy , not ggod, then you can transfer itunes purchases form an ipod: File>Transfer Purchases.
In some countries you can redownload some purchases:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
New hard drive and problems with sync
My problem is that I have installed a new hard drive (Win 7) which I installed itunes on and I cannot sync my ipod. I still have my old hard drive (windows XP) with the original itunes on it and I have tried to back it up but it still wont do it.
I can boot to XP and perform a back up but re-booting to Win7 and trying to restore it dosent work and I still get the syncing issue. I find the suggestion to erase my ipod and reinstall my music, a ridiculous solution and I'm guessing there is an "easy button" somewhere?
help!I probably should have mentioned this twist. My music is on a seperate drive. So what I have is Win7 on SSD1, WinXP on 2nd drive and media on a 3rd drive.
I backed up my media on both OS's and they seem to conflict with or do not recognize each other. Installing all my music on my SSD along with my Win7 is not an option (too small).
thanks -
Computer is getting a new hard drive and my iPods are full of all my stuff!
I have a 3rd generation Nano and a 160GB Classic iPod. Here is my problem and I am hoping that someone can tell me how to proceed through this. My computer crashed and is getting a new hard drive installed now. I have all of my music on the Nano and all of my movies on the Classic. When I get my computer back, it will be completely bare of anything other than the original operating system. How do I set up my new iTunes account so that it won't delete my entire saved libraries when I plug the Pods in the first time? Ideally, I would like to just transfer all of my old content straight back into the new iTunes library after I set it up.
Can anyone give me any guidance on how to pull this off?
Thanks,
MH75
Message was edited by: MH75I had the same problem when my computer crashed.
What you have to do is under the FILE menu, there is a thing known as Lybray/ Export Lybrary (Depending on your version of ITUNES) And click Export. Save it to a potable floppy/CD/Flash drive. When you get your new Computer, hit IMPORT, and click that file, and everything will be transfer over again. Ill be like you IPOD never left home! =D -
I lost my hard drive (and no I hadn't backed up my music files). Is there any way for me to transfer music from my ipod to my PC?
1). Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Copying iTunes Store purchases from your iPod or iPhone to a computer
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (including purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive -
I installed a new 1tb WD hardrive in my mid 2009 macbook pro along with upgrading from 4gb to 8 gb.
My start up disk is still almost full, booting up is extremely slow, and programs open up by themselves once booted up ex:word, excel.
New TB drive shows up alng with 8 GB but, new hard drive not updating somehere? What am I missing? See screenshots belowThanks for the response, but I'm looking for answers to a few of the other answers before I look at completeing the steps above.
1. Whyis the new TB drive recognized in image 1 but still have the original 256GB size still recognized(and almost full) in image 1 also? The HD should now be 1 TB, not 256 correct? If this were the case, the HD, would only be fraction of full capacity, Where is the disconnect between reconizing the installed tb HD but, it not being used?
2.Image Number 2 shows once again that the new tb internal HD is recognized. However, in image 3, the HD 256GB drive is still shown underneath the new HD. Does this show that I am misssing something, some step, related to confirming the new HD should be fully reconized instaed of this old 256 that still remains?
3. In image 4, the SATA heading, shows the TB hardrive, However, in image 5, the 256GB drive is still being shown under the storage heading? Once again, seems like I've missed some simple step to make this all the same?
4.Why is the start up from boot up soooo slow now. I was never even close to this slow(slower than PC startup slow) before the new HD was installed. IS this common when updraging to a new HD? Doesn't seem right?
5. Why now all of a sudden when the computer finally boots up are certain programs automatically opening up, word, excel, when they have never opened up like this before?
Summary: 1. New memory issues, 2. Very slow start up, 3. Programs opening up automatically at startup.
Until I address these issues, I'm not going to worry about loking through and deleting heavy folders.
All responses welcomed! -
MacBook Pro won't start after installing new hard drive and me
I changed the hard drive and also upgraded the memory on a mid 2010 13 inch Mac and then used the disks that came with it to reinstall the OS that came on that disk. It worked fine and installed and then the screen came on to transfer from the time machine to the new hard drive so I said yes, and it seems to work fine but then when it finished it asked me for a password. I hadn't put a password on it so that was a surprise. I tried several things but it finally only had the option to restart and when I did that it seemed like it was starting with the apple symbol and the little gear but then it went to a Gray screen with the little gear, and then seems to freeze and then finally goes to the blue screen. The disk to reinstall is still in the drive but I can't seem to get the install to start again. I've tried holding down the c key and starting, I've tried holding down the command plus the c key and nothing....just goes to the blue screen. Any ideas on how to fix this?
ThanksHi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one
I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
appreciated.
PS I have no idea which forum this should go under, so pretty much just picked one randomly.Thank you for the reply. Below is the diagnostic report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XVH7B
Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
Windows Product ID: 55041-011-1350732-86681
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E4300 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>M09 </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
Installation ID: 017002020180881956515246274583104396790522223804443953
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: XVH7B
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 6/6/2014 2:38:03 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 5:30:2014 15:10
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL M09
FACP DELL M09
HPET DELL M09
BOOT DELL M09
MCFG DELL M09
____ DELL M09
ASF! DELL M09
TCPA
SLIC DELL M09
SSDT PmRef CpuPm
scott cohen -
Installed new hard drive and flashing question mark appears
I bought a new hard drive for my macbook pro (mid 2009) because my original harddrive bit the dust... I purchased it off of amazon which states that its specifically for macbooks and the reviews appeared to back it up. I saw a lot of people with great reviews of the same model of macbook that I have so I figured it was the best solution.. I connected the new hard drive but I am getting the dreaded flashing folder/question mark. Is this normal before re-installing the OS x? Heres the problem, I am out of town on business and do not have the original OSx disc on hand. So my question is, is the flashing question mark normal upon installing a new harddrive? and if so, is there away to install the OSx onto the new harddrive without the disc?
my macbook was running mavericks before the harddrive went to poo, however I did try to re-install mavericks before i ultimately realized that I needed to new harddrive. I noticed that rebooting my mac with command+r would give me the option to reinstall mavericks without a disc or anything. the next question I have is, would this still be do-able on the new harddrive? I tried the command+R option on the new harddrive but nothing happens.
Can someone help me out here, I am getting a little desperate as I have gone over a week without my mac and theres so crucial things I need to get done! Luckily I have all my stuff backed up on an external hard drive, I just need to get the mac running again. Thanks for taking time to read!1. Yes, it is normal. If there's no OS on the drive, there's nothing to take the computer past that point.
2. No, there's no way on that Mac model. You need to use an existing system(see #4).
3. Not on that Mac model; it doesn't have the Internet Recovery system, and there isn't a recovery partition on the new drive.
4. If the backup drive contains a bootable clone of any compatible OS, or a Time Machine backup created from Mac OS X 10.8 or newer, connect it and restart the computer with the Option key held down. If it doesn't contain either, you can't.
(105476) -
Help with installing new hard drive and transferring data?
I have a MacBook Pro 13-inch mid 2009 that is running OS X version 10.6.8. The hard drive is full and I have a new one I'd like to install, but I am awfly intimidated. I'm hoping that someone could shed some light on kindergarten-style step-by-step instructions on how to make the switch. I'm mostly concerned about the data transfer part. I've found a handy video about physically installing the drive, so I think I'll be ok there.
Here are the items I have in preperation for the switch:
• 1.0 TB Hitachi Travelstar 7200RPM Hard Drive
• Portable bus-powered USB 3.0 storage solution (to turn my old hard drive into an external hard drive)
• Tools including a small phillips screwdriver and some Torx Screwdrivers
• Time Machine Extermal Hard Drive with all of my backups
Here are some things I have read that I find to be confusing
• Some suggest I should transfer my data from the old hard drive to new new one BEFORE I install the new one. (I'm not sure how that works.)
• Some suggest upgrading to the latest OS X before transferring any data. (Would that be Mavericks? I haven't upgraded to that yet. Is that necissary?)
• Some suggest that I will need the MacBook Pro's installation disk to make the switch. (I don't know where that disk is. Do I really need it?)
If anyone can clarify any of the above issues that I've listed as confusing, that would be great. Also, if anyone can help me figure out what steps to do first, second, third, etc., that would be great.
Thanks!Also,
Will I need the install disks for the Adobe Creative Suite and Microsoft office when I put in the new hard drive? -
Installing new hard drive and installing mac OS X again?
Hi I just ordered a new seagate 160gb hard drive along with 2gb corsair ram and im waiting for it to come in the mail.
Anyways I was wondering when I install the new hard drive in.... do I just put in the macbook os x installation disk or do I have to do something else.
Also when I install it will it ask for the serial number or anything like that? because I dont see the serial number anywhere on the disk or the laptop.
Basically what im asking is what are the steps that need to be done.thanks a lot, when I put on the new hard drive can I
put on the tab on the old one and put it on the new
hard drive so when I want to take it out I can?
because should I want to sell the laptop one day i
would want to put on the original parts.
Yes, follow this video.
http://eshop.macsales.com/tech_center/index.cfm?page=Video/macbook/macbook/high. html
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
An Apple User Group
Maybe you are looking for
-
My computer crashed how do I get my music from my iPod on my new computer?
My computer crashed how do I get my music from my iPod on my new computer?
-
Simple problem with a list initialization.
hello ! i have a class Contact and i would like to make a list of lists of Contact variables .. but when i try to run my code , it says "IndexOutOfBoundsException: Index: 0, Size: 0" . I know that every list of the list must be initialized .. but i d
-
hay guys I have written a query in ABAP OO to join 2 tables and have output in different table.Here i want only selected fields in 3 table .I dont know why this query is giving erroe.Help needed. TYPES : BEGIN OF ty_catsubcat,
-
Frozen apple logo on screen ipod touch?
Just the apple logo apears on screen seems frozen in position holding reset buttons do not seem to help? IPOD TOUCH
-
Holiday is Not reflecting in Work Schedule
Hi All, While maintaining infotype 0007, i checked work schedule rule and got to see that one holiday is not reflecting in Work schedule. I have assigned correct holiday calender and in holdiday calender holiday class is assigned "1" as well. Assi