Installed Windows 8.1 with Bootcamp but cant use my monitor through VGA-MiniDisplayPort

I used Bootcamp to install Windows 8.1, but when I tried to use my monitor, that worked on the Windows 8.1 preview, no longer works. It's a VGA-MiniDisplayPort. I'm not willing to spend extra money until I need to.

Solved: I figured out the issue was I was using UEFI for the Windows 8.1. Now all I'm doing is attempting to install it normally and so far the monitor issue is fixed.

Similar Messages

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

Cannot install Windows 8.1 with BootCamp on Mavericks

I have a brand spankin' new Late 2013 27" iMac, fully updated, with a 3TB Fusion drive. I have thrice attempted to install Windows 8.1 via BootCamp 5.5, with the 64bit edition DVD on the SuperDrive, and allotting 1TB out of the 3 available. There are no other partitions besides OS X and the BootCamp partition. The Windows installer successfully begins, but each time it cannot locate any partitions to load itself on. The list is just...blank.
I've already scoured the forums here for support, and tried several claimed remedies, such leaving all USB ports clear (except for the SuperDrive) until after install (even removing the flash drive with the Apple support files), and had a long chat with Apple Care today...they said the engineers would get back to me in about a week. I read somewhere that hard drives over 2.2TB may be an issue, but Apple states that Mavericks has no problem with this, leading me to believe maybe Windows 8.1 is still lagging in this department.
To that end, I recall someone, somewhere mentioning how to carefully partition the drive to get around this, and that Windows absolutely, positively, had to be on the 4th partition, including the hidden partitions such as Recovery, Boot OS X, etc. Only problem is that Disk Utility is showing way more hidden partitions than this, and they seem to be unremovable.
Does anybody have a solution/workaround for this, or are both products still too new to have a found a way to play nicely together?

I did it. After fours hours and two hours on the phone with Apple support, I installed Windows 8.1 to my iMac. So, I just wanted to share it with you.
System:
iMac 2013, 27" monitor, 1T fusion drive, wirless keyboard, magic mouse.
Software:
OS X 10.9
Windows 8.1 full version 64bit
(I skipped some steps such as type in software key, choose language, etc.)
1. For my last try, Instead of using Bootcamp assistant to setup partition for Windows, I used disk utility to create an 100G space for Windows with FAT file system and named it BOOTCAMP.
2. Insert Windows CD into the USB super drive.
3. Shutdown iMac.
4. While press and hold the left "option" key, turn on iMac.
5. Select CD/Windows icon to boot.
6. Choose Custom installation
7. Select the partition named BOOTCAMP (I am not sure why it is 200G; I assigned 100G. Well...)
8. Format
And the rest is history. By the way, when Windows restarts during installation, make sure to press and hold the left "option" key to boot up Windows.
I do not know why but I am happy now. As a matter of fact, I am sending this message from Windows 8.1 running on my iMac.
Good luck to you.

I have installed windows 7 on my MBP but cant get the drivers

i have installed windows 7 home premium on my MBP running mountain lion from the windows official disc that came with a Dell lappy but i cant download the drivers , when i go to boot camp and try downloading drivers , it shows network error.
the function keys are not working as well i cant right click using trackpad
plz help

Sharya wrote:
i downloaded parallels and when i run windows using parallels all drivers work perfectly
every thing is so amazing
The divers work in Parallels because Parallels is creating drivers for virtual hardware. Parallels is not using your computer's hardware it is creating virtual hardware. There still are no Windows 8 Bootcamp drivers. Bootcamp uses your computer's actual hardware.

I want to Install Windows 8 Pro with Bootcamp

I have Windows 8 running currently on Parellals 8. I cannot enter my product key for Windows yet but can use my flight simulater which works perfectly. I have tried to install Windows 8 using bootcamp (just to keep up to date) but keep getting the error
"Your Bootable USB drive could not be created An error occurred while formatting the disk"
This is using a 32 GB Adata S107 USB 3 stick and Windows 8 Pro on disk. The Windows 8 is a full version. All I do is drag the disk icon from my desktop to the ISO image space on Create Bootable USB Drive for Windows Installation page. Then I get the error.
How do I install Windows 8 full version onto my MBP Retina 2.6 GHz with Bootcamp?

I really dislike Win 8. It is made for desktops and tablets but is bad on the desktop.
During the public beta, MS gave users a way to bypass the Metro interface (MS themselves no longer call it Metro. Lord knows why). Just before the official release, they declared Metro was so great, everyone should be forced to use a tablet interface on a desktop computer and removed the simple option to bypass it. It didn't take long for others to develop and release ways to get around that. Here's three options. The first two cost a few bucks. The last is a freebie.
https://licensing.thinix.com/products/Product.aspx?ProductID=6472
http://www.startisback.com/#download-tab
http://forums.mydigitallife.info/threads/35189-Windows-7-explorer-for-Windows-8
As I don't have Win 8 myself, I have not tried any of these. On the last link the author of the freebie (next to the word Download) even notes the second option, StartIsBack, is better than his attempt.
Overall, I've read that Win 8 is better than Win 7 as far as performance. Faster and better security. It's the Metro interface many people can't stand.

Installing Windows 8.1 with bootcamp, partition issues.

So I am trying to install windows 8.1 onto my MBP running the latest 10.9.2 operating system. It took a while to get the HD to successfully partition, however when I finally got it working, upon booting from the USB drive I got this error message
windows cannot be installed to this disk. the selected disk has an mbr partition table windows can only be installed to GPT disks
Is there any way to change the partition table or to fix this?
I just tried restoring the partition to one, verifiying and repairing the disk in recovery mode, then re-running boot camp, issue persists.
running late 2011 15" MBP

Well, when you start the computer you should press ALT to show the boot manager. With Windows 8 and 8.1 (for Windows 7 there's not this problem) there should be three different icons: the OS X one, and then two called Wininstall (or something like that) and the other is similar but there should be written something like "EFI Boot".
Well, don't choose the EFI Boot one and you should be fine.
If you choose the first one the Windows installer format the Bootcamp partition correctly, and then you can start the procedure.

HOWTO: install Windows 7 RC in BootCamp via XP using Parallels 4.0 in SL

I know, the subject sounds pretty complicated, but don’t worry: the process of doing it is even worse.
Basically the main idea was to be able to use the same BootCamp partition of WinXP to upgrade to Win7, using the win7 .iso image to install it (I was simply to lazy to go to a shop and buy a rewritable DVD). Still, during my days <!> of tests and investigations few things came out. This can be useful even if one wants just to create a Win7 Parallels virtual machine from an already present BootCamp installation, make a Windows installation using BootCamp or for general knowledge. So let’s start.
*GOLDEN RULE*:
Disable (or even better, uninstall) any 3rd party NTFS package like Paragon NTFS (beta) NTFS-3G, NTFSmount or else. This caused me many problems since it seemed that Parallels and those packages were conflicting on the NTFS ownership of the BootCamp partition. Don't forget to reboot after that.
*INITIAL SETUP*:
Have Parallels 4.0 cleanly installed
Partition your hard disk with Boot Camp Assistant. Reserve at least 15GB for Windows. This will create a 2nd FAT32 partition called “BOOTCAMP”
Insert a WinXP SP2 install CD/DVD in the DVD drive
Go back to Boot Camp Assistant and click “restart”
*INSTALLING WINDOWS XP:*
The system will reboot from the WinXP install disk
Let the installer do its job (loading drivers)
The screen to chose on which partition to install Windows would appear.
Here is the first trick. Boot Camp Assistant actually created 2 more partitions. An empty one of about 100 MB, and the FAT32 one. RESIST from the temptation of deleting the FAT32 partition to then format the available disk space as NTFS or to convert it into NTFS. Instead SELECT the FAT32 partition. This will take us to a next screen were will be able to format it. Select “Format as NTFS” and go. It may be better to use the FULL format, but I’m not sure it’s necessary.
Not doing as above will produce at a certain point the infamous
“hal.dll missing or corrupted message”.
which I can assure you is very much frustrating since we get it only at the end of the installation.
The installation will then continue. Follow all steps as required until you have a full Windows XP installation.
Reboot and press the Option key (alt). Select the Windows partition to check that WinXP is actually cleanly installed. No need to install BootCamp device drivers at this point.
*CREATE THE PARALLELS WINDOWS XP VIRTUAL MACHINE (VM).*
Reboot as OSX.
Check in Finder or Disk Utility that the NTFS partition is present and readable.
Start Parallels Desktop
Go to File/New Virtual Machine and follow the steps to create a Windows XP virtual machine.
Choose custom setting to tell Parallels to use the BootCamp partition
Once the VM file will be create Parallels will start the BootCamp Configurator (a 4 steps very long process) to “convert” the BootCamp partition into a VM.
At the end it will install the Parallels tools as well
Let the WinXP VM start
Shut WinXP down and close its VM window
*UPGRADE THE WINXP PARTITION TO WIN7*
Here is the second trick, and this has been a pretty nasty one. Actually the Parallels BootCamp configurator seems to mess up with the BootCamp partition when creating a Win7 VM. Parallels when trying to access the BootCamp partition during the process of creating the new Win7 VM reports a message:
“A disk configuration error has occurred. Make sure that you have read/write permissions for the disk”
Even being able to pass after that error, and having Win7 installation starting, Win7 may report
Error code ox80070057
When trying to access/format the BootCamp partition.
The solution to these problems appears to be in the BootCamp Configurator, as I’ve found in the Parallels forum:
<a class="jive-link-external-small" href="http://forum.parallels.com/showthread.php?t=31190&page=3">http://forum.pa rallels.com/showthread.php?t=31190&page=3
Open the Terminal application and type:
sudo mv /Library/Parallels/Parallels\ Service.app/Contents/MacOS/BootcampConfigurator /Library/Parallels/Parallels\ Service.app/Contents/MacOS/BootcampConfigurator.old
Now the environment should be ready. So follow these steps:
Create a new Win7 VM in Parallels (File/New Virtual Machine)
Use as DVD drive the Win7 RC installation image. This will automatically select a Windows 7 environment in Parallels
Change the boot order having the CD/DVD-ROM first and Hard Disk 1 second
Use the BootCamp partition as VM and create it
The VM will start loading the Win7 installer. Select your local setting, a screen to chose the partition will appear, select the NTFS partition (BootCamp with WinXP on it). The installer will move the old WinXP files in C:\WINDOWS.old and continue with the installation.
Once the installation is complete do the following:
Start Windows 7 in Parallels to check that it is functional
Install Parallels Tools if you like
Shutdown the VM.
Shutdown OSX.
Press the power button and hold Option key at the chime sound
Boot from the Windows disk
Windows 7 should start booting. Don’t worry if it will take a long time. Personally it takes to me something like 30 s. with the blinking cursor before to see the graphical Windows 7 screen
Insert the Snow Leopard install DVD.
Open the Bootcamp folder and Double click on setup.exe to install the BootCamp device drivers.
If it says that your computer is not compatible do as follow:
Locate the Command Prompt app in the Start/All Programs/Accessories menu
Right click on it and start it as administrator
At the DOS prompt:
Select your DVD drive (D: or whatever)
Type
cd \BootCamp3.0\Drivers\Apple
Execute BootCamp.msi or BootCamp64.msi depending if your Win7 installation is 32 or 64 bits (yes, it works in EFI32 Macs as well. Not like SL K64 apparently).
You will be required to reboot.
Restart Windows 7 and enjoy!
PS: This is not intended to be a tutorial about the best way of installing Windows 7 in a Mac. I know a much easier solution is to burn a DVD and do the installation from it using BootCamp assistant. Still doing so one may (will?) face some of the problems described above. It’s just a description about how the Windows 7 installation can be done in the hard way, with hints about common problems installing Windows with BootCamp and the loading it into Parallels. I hope it will be useful for anyone. I just wished there was a similar tutorial when I started this mess!!

Yes it is, follow the Boot Camp Instructions here

Can't install Windows 7 Ultimate with Bootcamp (Lion)

Hello,
Any help with this would be much appreciated. I have a freshly installed copy of Lion installed on my Mid-2007 iMac. Everything's updated, I prepare my Bootcamp installation and, hiccup, it doesn't detect my Windows 7 Ultimate DVD because it's on an external optical drive. The internal one's busted and disconnected. I tried rEfit, to no avail since it doesn't seem to work with Lion. Does anyone know if a bootable USB drive would work? I could create one, but not with the Bootcamp utility since it's greyed out and not available for my system.
Ultimately, I'm just trying to get a copy of Windows running to work with some old proprietary software. XP or 7 would do. If someone thinks a fresh install of Snow Leopard and an install of XP with an external optical drive would work, I'd definitely do it.
Thanks for your help

What year/model is this Mac? If you select the first and second option, can you create the USB with a Windows ISO and BC drivers?
Unless you have a valid BC partition on your disk, the last option will not work.
Please post the output from Terminal of the following commands.
diskutil list
diskutil cs list
sudo fdisk /dev/disk0

When I try to install Windows on iMac with Bootcamp I get this message,"Can't install the software because it is not currently available from the Software Update server."

I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.

I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh

My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore, can anyone help with this?

My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore the ipod, can anyone help?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

Bootcamp - I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

You posted your Bootcamp question in the Macbook Pro forum. Your question has been asked and answered many times in the Bootcamp forum. https://discussions.apple.com/community/windows_software/boot_camp
When you post in the Bootcamp forum include the complete and exact error message.

Installing Windows XP Pro on Bootcamp

I'm new to the imac and this is the first time that I have used one. I'm trying to install Windows XP Pro with service pack 3. I also have a version of Windows XP Pro with service pack 2.
In total I have three Windows XP Pro disks which I have tried installing on Bootcamp but without success. All three versions are full versions and not upgrades. One version is an OEM with service pack 2 and the other two versions are volume licenses with service pack 3.
I've performed all the software upgrades before doing the installation as advised. My hard drive is 640GB and I am allocating 100GB to the Windows partition, so I'm going to choose NTFS as the format of the partition.
When I try the installation with the OEM disk I don't get the agreement screen or the screen where you choose the format of the partition i.e FAT 32 or NTFS. During the installation I can get as far as the files being copied to the windows folder, then I get an error message saying that a file cannot be copied, it's not the same file each time. If I'm lucky and it does copy all the files at this point it then reboots itself and I then have a plain black screen saying that an error has occured and the whole thing just freezes.
When I try the installation using either of the volume license disks I get all the screens as shown in the instruction guide but I only get as far as the files being copied to the windows folder, but it never gets to the 100% completion stage and I have to press F3 to exit the installation, then when it reboots it just freezes. Each time when it's copying the files you can hear the DVD drive start to slow down and finally grind to a halt.
This is as far as I ever get with the installation. Can anyone help me with this problem?

I don't have a definite solution. I had much the same problem early on.
The nearest I could get to the problem was that the Superdrive may have been slightly off calibration.
Then I thought if it's a calibration problem, and it seems a bit different each time I try to install from the Windows DVD, then there is another problem possibly related to the Superdrive.
It was all trial and error and took many hours to resolve but I did overcome it.
The Superdrive was over heating. Your iMac is constructed way differently to my troubled Mac Pro but the same scenario could still be possible. So I suggest that ways be found to cool the iMac, maybe with an external fan blowing on it or installing SMC Fan Control, or both.
Oops, SMC Fan Control runs under the MacOS so it will be useless when Windows is booted and installing from the DVD. External cooling is your best bet if overheating is the problem.
Good luck Linda.

Wifi not working under windows 8.1 with Bootcamp

Hi, I have installed windows 8.1 under bootcamp. it seems to work fine however the wifi connaction is not existing under windows. therefore i can only connect via ethernet. Anyone an idea how to solve it? Thx

Hey there,
I don't know if it's still interesting for you, but I've had the exact same issues. The only solution, as far as there is no official change from Apple, you can install Windows 8.0 via Bootcamp with official drivers for Bootcamp (wifi works great) and then install the upgrade to 8.1 as Windows still uses the former installed drivers from Win 8 on 8.1 as well.
Hope that helped, 8.1 runs even better on my MB Air than Mac OS 10.9 :/

HT1455 I tried to install windows 7 on my imac but the computer was not booting again what shall I do?

I was installing windows 7 on my imac but the installation was not completed and now I cannot boot what shall I do?

Provided you used BootCamp to do the installation, with your machine off, press and hold down the "Option" key while turning it on. Hold the key down until you get the screen where you can select which OS to boot into. Select OS X (you'll need to physically click the button here... tapping won't work if you have it enabled). Once in OS X, go into System Preferences and Startup Disk. This is where you set the default OS to boot into. Change it to OS X. Relaunch BootCamp Assistant to remove the failed installation of Windows. You can try again if you wish.

Will a DSP version of Windows XP work with Bootcamp?

Hi all. I am a semi-recent Mac convert. I have used Windows-based computers my entire life. I am an engineer and I use a lot of 3D modelling and FEA-analysis-type programs, all of which require a powerful computer and all of which are Windows-based. I bought a MacBook Pro with Tiger a couple months ago and will never go back to a PC for regular everyday computing. Very wonderful machine and well worth the money. I only wish now that I had waited for Leopard to come out so I would already have Bootcamp.
I now would like to upgrade to Leopard in order to get Bootcamp so I can set up a partition for XP. I realize that this requires a purchase of a full version of Windows and OS 10.5. I would like to purchase a full DSP version of XP Professional, since it is generally less expensive than OEM and has unlimited installation capability, rather than just a single license. DSP, from what I understand is supposed to be identical to the OEM version, minus a manual, a box, and tech support. I don't forsee a problem installing this on my Mac with Bootcamp, but I wanted to know if there's anyone else out there who has tried this and succeeded/failed at it before I start messing with my system. Remember, this is a full version of XP Professional that I'm referring to...it's just that it's a DSP version with a volume license, rather than OEM, with a single license. Thanks!

James Bond 007,
Alright cool. Thanks for your help. My only prior experience with any operating system was with Windows. Buying a Mac has certainly shown me that I don't have to deal with regular system freezes and crashes as I did with Windows.
Barlsaxshorty,
OEM stands for "Original Equipment Manufacturer". OEM versions are usually what comes preinstalled on a new computer. Like DSP (Delivery Service Partner) versions, they don't come with a box, a printed manual, and usually no tech support or rebates. This means the software can be sold for much much cheaper than retail versions.
As per James Bond 007's response, you will be able to install an OEM FULL version just fine. A full version means that you are installing a particular type of operating system (such as Windows) for the first time. An upgrade is only for owners of previous versions of that software line. For example, someone with Windows 2000 currently could buy an UPGRADE to Windows XP at a significantly lower price, which only includes those resources necessary to make the upgrade that the previous version didn't contain. A FULL version of Windows XP is what would be installed on a computer that did not previously have a version of Windows on it, such as a Mac. In order to run Mac OS 10.5 AND Windows XP through Bootcamp, you will need to purchase a FULL version, whether it's a retail, OEM, or DSP version.

Installed Windows 8.1 with Bootcamp but cant use my monitor through VGA-MiniDisplayPort

Similar Messages

Maybe you are looking for