Added fields not appearing in the DSO transformations.

Hi,
I have added three new info objects into data fields in the DSO then activated and not appearing added fields in the transformations.
Please suggest me,
regards,
Jayapal.

Hi Jayapal,
i dont know whether it would help you...you can give a try on it.
Instead of deleting the Transformation, just delete the mappings if any in the transformation.
Goto DS->Fields Tab-->In the Column Template info Object. Try mapping corresponding IO with the Source IO.
Then it will show a pop up give Copy . Activate the DS.
Goto Info Provider>Select the Transformation> If it is active-->reactivate it by clicking the Pencil Icon with glass and click activate icon.
If its not active, then reactivate it again by clicking the Pencil Icon with glass.
Let me know if it Works... Cheers
Regards,
Syed
Edited by: shameer83in on Nov 20, 2009 12:10 PM

Similar Messages

  • Data not appearing in the DSO

    Hi experts,
    Based on requirement i have enhanced the DSO already exsisting in production system with new infoobjects and enhanced the required fileds in datasource level also and transported to production sysem.I have made certain changes in report level also by taking the newly added infoobjects and transported in production system successfully.
    My question is when i am going to execute the report it is showing there is no applicable data found.
    We donot have the data at source system level for the new infoobjects but the data is present for the previously exsisting infoobjects. when data is exsisting for the old infoobjects which were exsisting before i made the changes to the dso then why the report is not fetching any data from the dso.
    Note :- The DSO is exsisting in active stage only and data is present for the old info objects also.
    please clarify my question.
    thanks and regards
    pedamarla

    Hi,
    It could be possible that there are no records for the set of restrictions you are using in Report.
    Try to LISTCUBE your query on that DSO.  Use same selections in listcube.
    Check the selections and conditions used in Query and then probably you can conclude the issue.
    Regards,
    Pratap sone

  • WBS field not appearing in the down payment document posted via FBA7/F-48

    i have created several down payment docs wrt PO, acct assignment WBS, but none seems to populate the WBSE field in the payment document, when using FBA7/F-48. All the down payment documents appear in the PO (Purchase order history) but only those which have been paid through F110 populates WBSE and the ones paid through FBA7 does not populate WBSE field. We are clear that the down payment documents are posted rightly w.r.t PO but its just that they dont get linked to the WBSE when FBA7 is used and gets linked when F110 is used. Please suggest if am missing any config setting. i already raised this in PS Forum but it now seems more of FI.
    /thread/1791429 [original link is broken]

    Hi,
    please check whether the feild status of your document types KZ, KA and KG are having the status for WBS Elements as optional or hidded
    Best Regards,
    Ravi Reddy

  • Operation number field not appearing in the billing document

    Team-
    Recently we have done EHP5 upgrade and after that operation number field is available in the sales document but operation number field is not available in the billing document. Any idea why ?
    Thanks

    Hi
    Check what patches have been put in EHP5.As it is related to field.,its better to check the configuration settings  and if everything is fine then,its better to take your technical team help by checking where the operation number field is getting updated in the sales order and check whether the operation number field is coming  blank in billing document or not.
    Regards
    Srinath

  • Today I imported quite a lot of Audio CDs. When I wanted to listen to them I realised that most of them aren't in my library. And they did not appear in the recently added list either. Can anyone tell me what happened and where to find them? Thanks!

    Today I imported quite a lot of Audio CDs. When I wanted to listen to them I realised that most of them aren't in my library. And they did not appear in the recently added list either. Can anyone tell me what happened and where to find them? It's really strange because all the imorts definitely finished. Thanks!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Newly added Cal.View Measure does not appear in the BEX Designer

    Hi,
    anybody come about this :
    A newly added Cal.View Measure does not appear in the BEX Designer:
    I got a runnig query in Bex Designer, based on a transient InfoProvider which is based on a HANA Calculation View
      and
    added a new measure to the Calculation View
      and
    added a Reference InfoObject in the Publisher to the (transient) InfoProvider.
      and
    see the newly added filed in the Listccube of the(transient)   InfoProvider with a technical generated name
      and do not
    get the newly added measure in the BEX Designer.
    Whats wrong ? What needs to be done ?
    Thank You
    Martin

    Hi Martin,
    Are you trying to consume the HANA Calc View in BEx Front End Tool - Query Designer.Could you also check the data preview of the Calc View shows the newly added Measure.Check the definition of Calc View under SYS_BIC schema ->Column Views.
    Rgds,
    Murali

  • The new column designed not appears in the form

    Dear All Gurus/Experts,
    I created new column directly in the database stored in the SQL server 2000,in table IGN1, right click --> select design table, then right click --> insert column, I write U_copqty, numeric data type, 9 is its length and allow nulls check mark.
    I can't understand why the field is not appeared in the form settings like other columns so that I can thick and make it appear in the form IGN1 (receipt from production). I have read development training files but I am confusing if it is really need VB.net to do that. I also know about user defined field but it doesn't what I need because I have created UDF in the production order row but I can't find it in the receipt from production form, so I just did create the new field/column directly in its database but I fail to make it appear in the form settings when I need it to be available in the receipt from production form. would you pls help me ? I appreciate your answer. TIA
    Rgds,
    Steve

    Hello Steve,
    The reason you can not see the directly added field is because that there is another table CUFD which holds all the User Defined Field information. So, you need to add a new record in that table. However, the approach is really not SAP recommended. Directly handling database could be very risky. Please create the user defined field according to the steps.
    Regarding why you can not view the field you created, did you create a row or document level field?
    Hope this helps,
    Nick

  • Af:query component added field not removed when remove icon is clicked

    I have an af:query component on a popup dialog. In advanced mode when I add a field, the new field appears in the searchRegion followed by a red X remove icon. If I subsequently click that remove icon, the query refreshes, the red icon is gone, but the newly added field still remains. The query component is linked to a standard VO query executable in the bindings. There is no custom processing of the value, model, queryListener or the queryOperationListener. In all other respects the query component works fine. The only problem is a newly added field not being removed when the remove icon is clicked. Here's how the component is setup (an added wrinkle is that the query component is hosted in a Declarative Component, so that makes this code a little harder to decipher).
    Does anyone know where I should start looking for this? Hopefully I don't have to implement my own queryOperationListener.
    JDev version is Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923
    --- snippet from the page fragment ------
    <af:popup id="frmsLstPU" contentDelivery="lazyUncached">
    <af:dialog id="d1" type="ok"
    styleClass="AFStretchWidth" resize="on"
    stretchChildren="first" contentWidth="840"
    contentHeight="480"
    title="#{UnifiedResourceBundle['FORMSLIST.DIALOG.TITLE']}">
    <idmkr_adf:Correspondence_Formslist_Query idmkr_query_model="#{bindings.FormVOFlatQueryCriteriaQuery}"
    idmkr_table_binding="#{viewScope.FormsListBacking}"
    idmkr_table_model="#{bindings.FormVOFlatQuery1}"
    idmkr_bindings="#{bindings}"
    idmkr_resourcebundle="#{preferences}"
    idmkr_printStreamBean="#{viewScope.FormsList}"
    id="cf1">
    </idmkr_adf:Correspondence_Formslist_Query>
    </af:dialog>
    </af:popup>
    -- snippet from the Correspondence_Formslist_Query declarative component ------
    <af:query id="qryId1"
    headerText="#{UnifiedResourceBundle['FORMSLIST.QUERY.SEARCH.TEXT']}"
    disclosed="true"
    value="#{attrs.idmkr_query_model.queryDescriptor}"
    model="#{attrs.idmkr_query_model.queryModel}"
    queryListener="#{attrs.idmkr_query_model.processQuery}"
    queryOperationListener="#{attrs.idmkr_query_model.processQueryOperation}"
    resultComponentId="::resId1" displayMode="default"
    styleClass="AFStretchWidth"
    rows="4" maxColumns="2"/>

    I have changed the contentDelivery from "lazyUncached" to "immediate" and the same problem occurs. Thank your for your suggestion.

  • FDMEE: EBS segments not appearing in the FDMEE Load Rule window

    I have configured FDMEE to load GL data from specific E-Business 12 segments. This has been working fine.
    Recently, additional segments were defined in EBS. Unfortunately, these new segments do not appear in the Load Rule box (whereas the original segments do appear).
    Is there an option/trigger somewhere in FDMEE (or EBS) to force the new segments to appear in the FDMEE Load Rule selection segment box? (I have re-initialised the source system, with no effect.)
    Ian

    Hi,
    You need to make sure that you are adding them to the Import Format defined between the Source and Target system. Have you done this yet?
    Are there target dimensions in the app to point to?

  • Vendor to vendor entry-profit center field not appearing in line item

    Dear Sir/Madam
    We have gone live with New GL Implementation. Last month we have implemented it.
    Now we are passing entries from vendor to vendor. It is transfer entry from one vendor to another through T code FB01.
    we have made the profit center field mandatory in the Reconciliation GL account Field status group. Also we have made the profit center field mandatory in the Posting key 21 and 31 field status. The profit center field is not appearing in the line item because of which we are not able to post the entry.
    Kinldy help us to resolve the issue.
    Prashant Zinge

    Hi Prashant,
    As mentioned by all here.. it is correct that you do not have profit centre in Vendor line items..
    As I understand it is a one time activity.. of transferring balance from one vendor account to another vendor Account.. so you can use a clearing account to transfer the balances.. this way your entries will increase but you will be able to post w/o any customisation. You can also use LSMW to post this.
    Regards,
    SAPFICO
    Edited by: SAPFICO on Jun 20, 2011 11:49 AM

  • Details not appearing in the dropdown list in the filter window

    Dear All,
       I have come accross a unique problem. I have made a user defined query. Now there is an item code column. I want to filter the item codes in the generated query. But all the items are not appearing in the filter window> item field> dropdown. My query output shows all the items but the filter does not!!!
       I have 10,000 items where the codes are ranged from A to X with various serials. When I run the query the report shows all the items which are within the query conditions. But when I open the filter window then in the dropdown for the item code only codes upto "G" appear.
       How can this be resolved?? otherwise I am not able to filter my selections.
    Regards,
    Raja

    hi suda,
    The query is to generate a report to find out the total units of items sold through delivery. Actually, there is no problem with the query. The query shows absolute reports. The problem is among these 10,000 items which come in the report, if I need to see some specific item then I can use the filter option. But in the filter option the items codes upto "G" are only appearing inspite of the fact that the query report list has all the items from A-J.
    I hope I am clear. This is not the problem with this query only. In all the queries where the item details are appearing, the system doesnot give me the flexibility to filter by all the items rather only upto a range. Why is it so?
    Still if you need to see the query then please let me know. I will put in the query statement.
    Regards,
    Raj

  • Emails that I send from my iMac do not appear in the icloud sent box.

    Emails that I send from my iMac do not appear in the icloud sent box.  Is it possible to have the sent folders in synch between my imac and the icloud?  Thanks for any help.

    You can check the form history settings.
    *Tools > Options > Privacy > History: "Remember search and form history"
    *https://support.mozilla.org/kb/Form+autocomplete
    The website may be using autocomplete=off in that field to prevent Firefox from saving and filling that data.
    You can remove autocomplete=off with a bookmarklet to make Firefox save form data.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered

  • Fcx4 bin clips are not appearing in the viewer after clicking on them.

    fcx4 bin clips are not appearing in the viewer after clicking on them , i need help getting them to appear in the viewer.

    I have the same issue. I am using apex.oracle.com for some test applications, but for last couple of weeks when I login and click the "Application builder" I could not see my applications there (around 4-5 of them)! It says No applications found.
    Neither I have any application groups setup nor do any criteria given in "Application" search field under "Application builder".
    The only way I could access some, if not all, of my applications is to pull it from the link under the context box "Recent" (which you can see in the right hand side of the "Application builder" page.)
    Any help is greatly appreciated. This issue is not a show stopper as I could still pull out my critical applications from the recent link, but its definitely a worrisome issue.
    Thanks in advance
    Regards
    Ligon Gopinathan

  • Value not appearing in the workbook

    Hi Friends,
    There are some values in the workbook which are prob appear through cell references. In dev sys its fine. We have moved the workbook to Quality, but here the values are not appearing. The value is period value which is not comming from either query columns or rows. I am unable to track down from where this value is appearing in the workbook. This period value appears where this (Layout ->display text elements ->General) appears ofcourse in Dev not Quality. There are many tabs(Queries) in the workbook.
    How to know/check from where this value is getting populated.
    Thanks & Regards,
    Shreesh.

    After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
    Next time when you run the report, put that variant and then run
    Values will come

  • Adobe Printer did not appear in the printer list

    Adobe Printer did not appear in the printer list after installing Acrobat Pro 12 month Subscription on Windows 7 Ultimate. I tried installing manually as per instructions but no help. Any suggestions?

    Hi Michael,
    Thanks for your reply.
    Yes, I did the repair, I also installed updates to 11.0.05 but to no avail.
    I uninstalled and reinstalled and followed all the same procedures including manually adding a printer usuing the 10 Adobe PDF Converters in the Xtras folder. No Success.
    Any other suggestions?

Maybe you are looking for