Installed windows update, appears to have been June 16 2011 at 3:00.13 am now can't get on line I did a restore to previous of install and all worked oK

This started with windows 7 update June 16 2011
installed windows update, appears to have been June 16 2011 at 3:00.13 am now can't get on line I did a restore to previous of install and all worked oK But This morn I restarted my computer and update reinstalled and I don't have a restore point that will help (my bad)

These are the updates that were installed
Security Update for Windows 7 for x64-based Systems (KB2476490)
Installation date: ‎6/‎16/‎2011 11:31 PM
Security Update for Windows 7 for x64-based Systems (KB2544893)
Windows Malicious Software Removal Tool x64 - June 2011 (KB890830)
Security Update for Windows 7 for x64-based Systems (KB2535512)
Security Update for Windows 7 for x64-based Systems (KB2503665)
Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2544521)
Security Update for Windows 7 for x64-based Systems (KB2536276)
Security Update for Windows 7 for x64-based Systems (KB2525694)
Cumulative Security Update for Internet Explorer 8 for Windows 7 for x64-based Systems (KB2530548)
Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2518867)
Update for Windows 7 for x64-based Systems (KB2488113)
Security Update for Windows 7 for x64-based Systems (KB2536275)
Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems (KB2518870)
Security Update for Windows 7 for x64-based Systems (KB2476490)
Security Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems (KB2478663)
Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 for x64-based Systems (KB2478661)
Security Update for Windows 7 for x64-based Systems (KB2544893)
Installation date: ‎6/‎16/‎2011 3:00 AM

Similar Messages

I received my new Verizon Edge bill in the mail and it is $80 higher than my old plan. I have been so unhappy with this change over. Went through hell getting our second phone activated because of a weird computer glitch and when we asked if we would re

I received my new Verizon Edge bill in the mail and it is $80 higher than my old plan. I have been so unhappy with this change over. Went through hell getting our second phone activated because of a weird computer glitch and when we asked if we would receive any consideration for the time, travel, and money we put into getting the phones the way they were supposed to be, we were told to wait until the bill came and then they could make adjustments. Now I have the bill and have no idea "who" the we would be that could make adjustments. To top it off, the only way I know my account will get any attention is to post this in chat. I am so disappointed and will be counting the months until our phones are paid off and we can change companies.

Call 800-922-0204
I just purchased a new device using Verizon Edge. Why does my bill look higher than normal?
There’s two reasons why your first bill after signing up for Edge might be higher than normal:
Prorate Charges – If you upgraded an existing line and did a price plan change, you may have price plan charges and credits that went into effect the day you upgraded.
Sales Tax – Most states require sales tax on the full retail price paid by the customer, which in most instances will be charged at the time of the first invoice.
Note: Customers who purchased devices in AL, AZ, CO, IL, NM, ND or SD will be billed taxes and surcharges monthly as payments are made.
Your bill will normally include:
Your last Edge installment payment
The next Edge installment charge
If you are on a MORE Everything Plan, a monthly access discount for each qualifying line.
The details of Edge installments and discounts can be viewed at the line level portion of your bill under Monthly Charges and Equipment Charges, or in My Verizon, My Bill then Charges By Line.

I have been invaded by a malware called MacKeeper. How can I get rid of it?

I have been invaded by a malware called MacKeeper. How can I get rid of it?

This is the accepted way of doing it.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
and here sre some extra details from previous threads.
Do not install MacKeeper

We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

Gather up the proof that the dealership is the original purchaser of the iPad,
and take the iPad & that proof to a physical Apple store for possible assistance.
It is highly suggested that you make a genius bar appointment to avoid delay
at the store:
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
If no Apple store close by, get the information mentioned above and contact
Apple Contact Us for assistance.
Once the problem is resolved, you may wish it use Guided Access to limit
what customers can do with the iPad.
iOS: About Guided Access - Apple Support

HT1338 I have just installed some updates & appear to have lost some files Can I uninstall the updates or do a system restore I am using Maverick

I have just installed some updates and find I have lost some files Can I uninstall the updates in a system restore process?

Hi Eric you don't say how I can get rid of the updates .? The files I lost were all pictures I think mostly JPEG

My ipad mini was stolen and i have activated the find my phone to lock it. how can i get the serial number off my itunes or icloud profile? and what are the chances that the find my iphone app works when someome erases the device?

my ipad mini has been stolen and i have activated the find my iphone to lock. now it is only a wifi device so what are the chances that a person can get hold of it and log onto wifi without the password of my device to unlock. does that not make the app rather less useful as i have to hope that the person is apt enough to log onto the internet but not enough to erase it and start afresh. is it possible to find my device even afte someone has erased it?

"Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
http://www.apple.com/icloud/features/#fmip

The start page on Firefox on my laptop (Windows 7) appears to have been hijacked. Phony logo w/ cartoon character appears w/ "check me." Anyone seeing this ?

When opening a new session with Firefox, the standard Firefox logo appears briefly, then the screen changes to a very distorted version of the same logo, with a small cartoon character saying "click me". Anyone seeing this ? This just started on my laptop in the last day or so. Thanks for any suggestions to get rid of this junk !

If you prefer not to see the snippets on the about:home page or otherwise experience problems with a snippet then you can set the browser.aboutHomeSnippets.updateUrl pref to an empty string on the about:config page.
Delete the storage\persistent\moz-safe-about+home folder in the Firefox profile folder with Firefox closed ("3-bar" Firefox menu button > Exit/Quit) to remove snippets stored in IndexedDB and make Firefox use a default snippet set.
You can reset the browser.aboutHomeSnippets.updateUrl pref via the right-click context menu to the default value to re-enable the snippets and make Firefox recreate the moz-safe-about+home folder.
You need to close and restart Firefox after changing the value of the browser.aboutHomeSnippets.updateUrl pref.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config

Firefox opened Oct 15, 2014 as a black screen. I have been using it for years with no problems. Can't get it to reinstall.

I have a black screen as of starting up Mozilla this morning. No address bar or any tabs are available. I have done system restore to an earlier date when I knew it was functioning and still have the same problem. I have uninstalled and reinstalled and have the same problem.

hello laplus5, other users with this problem all had an embedded intel hd2000/3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

We have been trying to download Icloud on my MacPro. Can't get it to work.

We get to the page where you are to down load the Icloud but it will not let me down load. We upgraded my computer and still can't download. Icloud wouldn't recognize my Apple password and username??

My husband tried to up grade my Mac to what is required and I thought it had worked
Tried how??? What exactly did he try??? What version of Mac OS are you running now???
I also saw where some who upgraded to the 10.8 are having a lot of problems with their MacBookPro now.
What else would you expect on a forum for technical issues???

I am getting the following error message "wireless network appears to have been compromised"

I am getting the following error message "wireless network appears to have been compromised"
Any information would be helpful.

bclark173 wrote:
I am getting the following error message "wireless network appears to have been compromised"
Can you provide a screenshot of this message? Make a screenshot by following the directions here:
http://support.apple.com/kb/HT5775
Be sure no sensitive personal information is displayed. To add that image to a post here, click the camera icon in the post editor toolbar.

I have installed Adobe Photoshop CS (original 2003 2004 version) on my new Windows PC. I have been unable to activate it and the note says it will expire after 29 days. What can I do to activate it?

I have installed Adobe Photoshop CS (original 2003 2004 version) on my new Windows PC. I have been unable to activate it and the note says it will expire after 29 days. What can I do to activate it?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Blue screen after installing windows update

I get this error message after I install the windows updates. I have the K8n Neo Platinum with Nvidia Nforce 3 250gb chipset. I am running XP X64. The computer runs great until I do the windows update. I have tried changing setting in the bios but that don't matter. Here are 3 pix. I had to take them quick so they aren't very good. I am right now re-formatting again so I am on my other computer.
OK how do you add pix from a digital camera on this forum??? ,
Here is what it says. stop: c000021a (fatal system error) this session manager initialization system process terminated unexpectedly with a status of 0xc0000263 (0x00000000 0x00000000) the system has been shut down.
It then goes into a reboot mode and comes back with the same blue screen error code.
Help

I e-mailed MSI tech support today also about the problem. A month ago I did the same thing. The tech said "oh I haven't heard of that happening before" So thanks for the link. I can't wait to get the "haven't had that happen before" DUUHHHH again. I will just link them. A month ago I wrote went through about 10 of the updates. Doing a re-install, updating and see what happens. I wrote down a couple of them that cause problems. It was just way to much work to time consuming so I just stopped.
I don't quite understand that voltage thing with the processor. I would think you should be able to set the bios to "fail safe setting" and it should run and do everything.
It don't look like they posted a fix for this problem. But I didn't install any of the security updates anyways. I wonder if it is just my Motherboard or what. There must be someone out there who is running x64 with one of these boards.
thanks again.

Server 2012 (not R2) RODC fails to install Windows Updates

Good morning all
Since around October, our 80-odd 2012 (non-R2) RODCs have been failing to install windows updates, rolling them back on reboot. Patches that don't require a reboot are fine. The short version is, please log a call with MS and reference this thread, if you're
having this issue as currently they're saying they won't fix this!!
Our product support group opened an official case and reported this with Microsoft and they've found the cause. PLEASE NOTE however, that this relates to RODC and ALL patches failing, not just 3000061 on non-RODC.
There was some chat relevant to this as originally it was thought KB3000061 was to blame, and a few other people had had the same issue there (see links at the bottom). I think however, that this issue now stands alone as any patch we try to install will
fail.
000093 2015-01-23 20:18:30, Info CSI 00000015 Begin executing advanced installer phase 38 (0x00000026) index 4 (sequence 43)
000094 Old component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000095 New component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.17100, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000096 Install mode: install
000097 Installer ID: {118ca598-79a0-4297-953d-e82183960fd2}
000098 Installer name: [13]"Group Trustee"
000099 2015-01-23 20:18:30, Error CSI 00000001@2015/1/23:20:18:30.673 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000100 [
000101 (null)
000102 ]
000103 [gle=0x80004005]
000104 2015-01-23 20:18:30, Error CSI 00000002@2015/1/23:20:18:30.673 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000105 Element:
000106 [372]"<groupTrustee xmlns="urn:schemas-microsoft-com:asm.v3" name="WinRMRemoteWMIUsers__" description="Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user." type="User" enabled="true">
000107
000108 <members></members>
000109
000110 </groupTrustee>"
000111 [gle=0x80004005]
000112 2015-01-23 20:18:30, Error CSI 00000003@2015/1/23:20:18:30.673 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED).
000113 [gle=0x80004005]
Cause:
The installer uses SAM API calls to manage the group. It always connects to the local SAM instance. The component also handles an uninstall task in the same function. On uninstall the group is being deleted.
So the SAM handle is requested with "Create Group" and "Delete" access.
The error happens because a RODC does not allow any changes and thus returns STATUS_NOT_SUPPORTED.
More information about the prevent from accidental deletion feature please refer :
http://technet.microsoft.com/en-us/library/cc773347(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc739350(v=WS.10).aspx
Recommendation:
This is a Bug in the RODC running on server 2012, However you may do an in place upgrade to Server 2012 R2 and then proceed with the installation of the patch.
The bad news is this is fixed in 2012 R2 with a hotfix - but it isn't fixed in 2012 and it won't be because.. they've only had one official report logged. And that was by us. So, if you want this fixed, you need to start logging this with MS now.
What I can say just now is that this isn't related to the registry fixes with WinEVT we've all been trying, it's NOT limited to 2008 that has been upgraded in place to 2012 (our product support group replicated it in the lab with a brand new 2012 promoted
to RODC) and it IS only happening with RODC. Possible fix might be to make your RODC RW for a bit and install your patches then.
Background reading:
https://social.technet.microsoft.com/Forums/en-US/f77691d8-a9d0-4714-98ad-71665cfa8965/kb3000061-fails-to-install-on-server-2012?forum=winserver8gen
https://social.technet.microsoft.com/Forums/en-US/70219bcb-36a8-466e-900b-cbf390db38d2/failure-configuring-windows-updates-reverting-changes-postreboot-status-0x800f0922?forum=winserver8gen

The error indicates that IIS is returning a "404 not found" error back to the Windows Update Agent. That might mean that you need to specify the correct port that WSUS is listening on, e.g.:
WSUSServer=http://yourserver:8530
Thanks,
-Michael Niehaus
Senior Product Marketing Manager, Windows Deployment
http://blogs.technet.com/mniehaus
[email protected]

SCCM Client PC's failing to download/install Windows Updates

Hi,
Last month I noticed that our client PC's, shortly after they had built (using SCCM Task Sequence) were downloading and installing Windows Updates using the usual Windows Update process. What I mean is, I had Software Centre showing Updates as installing,
but also had the Windows Update agent installing various updates. It was also showing in the start menu (Yellow icon saying Shut down and install updates). Now my understanding is, that that shouldn't of been happening, and only SCCM/Software Centre should
be showing Windows Updates as installing.
I noticed that we had some GPO's set for Windows Updates, which I have disabled, as I believed these were not necessary. Also, I like to control my Updates via SCCM Software Update groups after testing them, and not just allow clients to grab any updates
that are required and approved.
My problem now is, none of the clients are getting/installing any updates. I'm getting the following errors in the WUAHandler.log:
Unable to read existing WUA resultant policy. Error = 0x80070002.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
So, I've checked in:
HKLM\Software\Policies\Microsoft\Windowa\WindowsUpdate\ & HKLM\Software\Wow6432Node\Policies\Microsoft\Windows\WindowsUpdate
and neither have a WSUS server set. I'm assuming this is correct?
RSOP shows all policies in \\Computer Configuration\Administrative Templates\Windows Components\Windows Update as
DISABLED
GPEDIT shows \\Computer Configuration\Administrative Templates\Windows Components\Windows Update\Specify intranet Microsoft update service location as
Enabled and as our server (https://XXX.XXX:8531) - I'm assuming this is what SCCM client sets as if I changed this setting and then restart the setting comes back. If it was a Group Policy conflict then I
would expect to see it in RSOP.
Does anyone have any suggestions? I'm puzzled as to what to look at next. Is my first assumption of having 0 group policies configured for WSUS correct? Am I also correct in assuming Windows Updates shouldn't show in Control panel, or at the Start > Shutdown
prompt, and only show in Software Centre?
Thanks, and sorry for the long winded post!

Hey Jason,
Thanks for replying and explaining the WUA stuff. That made sense to be but my mind was being clouded by the issue all of the PC's/Clients onsite were, and are still getting. I cleared out the Group Policy cache as detailed on the link.
- Cleared C:\Program Data\Microsoft\Group Policy\History\*.*
- Ran a gpupdate /force
- Restarted PC
Issue still remains. Here is the output from the WUAHandler.log
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles
WUAHandler 13/04/2015 16:14:34 2508 (0x09CC)
Its a WSUS Update Source type ({FC358571-80C5-4EAA-8A33-F79AD4C14785}), adding it. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing resultant WUA policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Enabling WUA Managed server policy to use server: https://(Name.domain of our SCCM SUP):8531 WUAHandler 13/04/2015 16:15:02 2488
(0x09B8)
Waiting for 2 mins for Group Policy to notify of WUA policy change... WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing WUA resultant policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)

Installed windows update, appears to have been June 16 2011 at 3:00.13 am now can't get on line I did a restore to previous of install and all worked oK

Similar Messages

Maybe you are looking for