Installing http server on windows 7
Can anyone find a link for me, thanks, Doug
Are you installing webtier? If so I wrote about it installing on 2008r2 which probably looks a lot like win7. If this is 64 bit win7 then
I think you need to be mindful of the bitness of java. If you install all 32 bit stuff or all 64 bit stuff then maybe you're ok but I'm not
sure you can run one thing that installed 64 bit java and another thing that installed 32 bit java. Something to think about...
installing:
Re: documentation error regarding loc of ohs 11 dads.conf solved
enabling ssl:
how to enable ssl in ohs
Similar Messages
-
HTTP Server for Windows 64 bit not on the companion CD
Hi,
I cannot find the HTTP Server for Windows 64 bit on the companion CD. Any idea where I can get it from? For the 32bit version the HTTP Server is on the Companion CD.
Thanks in advance,
FlorinIf i am correct reason should be : Oracle Application Server 10g will run as a 32-bit application
Following platforms have the same media in either case:
Microsoft Windows 32-bit and EM64T/AMD64
(Not Itanium-64, which is separate and referred to as "Windows 64-bit")
Linux x86 and Linux x86-64
Solaris Sparc 32-bit and Solaris Sparc 64-bit
As the Oracle Application Server 10g will be run as a 32-bit application. See the Installation Guide or readme files for any specific steps on these 64-bit platforms.
Refer the Note.433061.1 - How to Obtain Application Server 10g Media, Patchsets, and Patches -
After installing HTTP server..
Hi all,
After installing http server on linux in a diffrent oracle home. My Enterprise manager dbconsole is not starting I am getting following error. Please help me.
$ tail -10 emdctl.trc
2006-10-30 16:20:52 Thread-4136076976 ERROR http: snmehl_allocateListenerPort: f
ailed to bind socket: Address already in use (errno=98)
2006-10-30 16:20:52 Thread-4136076976 ERROR http: nmehl_startHttpListener: faile
d to listen to HTTP port for http://localhost:3938/emd/main
2006-10-30 16:20:52 Thread-4136076976 ERROR main: nmehl_startHttpListener failed
starting http listener
[oracle@localhost log]$ tail -1 emdctl.trc
2006-10-30 16:24:06 Thread-4136560304 WARN http: snmehl_connect: connect failed
to (xxxx:1158): Connection refused (error = 111)
[oracle@localhost log]$ tail -10 emdb.nohup
----- Mon Oct 30 16:21:22 2006::Restarting DBConsole. -----
----- Mon Oct 30 16:21:22 2006::Console Launched with PID 21394 at time Mon Oct
30 16:21:22 2006 -----
06/10/30 16:21:25 Error starting ORMI-Server. Unable to bind socket: Address al
ready in use
----- Mon Oct 30 16:22:53 2006::EMAgent exited at Mon Oct 30 16:22:53 2006 with
return value 55. -----
----- Mon Oct 30 16:22:53 2006::EMAgent has exited due to initialization failure
----- Mon Oct 30 16:22:53 2006::Stopping other components. -----
----- Mon Oct 30 16:22:53 2006::EMWD Stopping DBConsole. -----
--- DBConsole internal stop. No OC4J admin passwd hence hard stop. ---
----- Mon Oct 30 16:22:53 2006::Commiting Process death. -----
----- Mon Oct 30 16:22:53 2006::Exiting watchdog loop -----
An other issue is the http server is not starting and getting following error.
/app/oracle/product/10.2.0/companion/Apache/Apache/bin/httpd: error while loadin
g shared libraries: libdb.so.2: cannot open shared object file: No such file or
directory
Thanks,
Message was edited by:
james@James,
The key parts in that output are -
2006-10-30 16:20:52 Thread-4136076976 ERROR http: snmehl_allocateListenerPort: f
ailed to bind socket: Address already in use (errno=98)
2006-10-30 16:20:52 Thread-4136076976 ERROR http: nmehl_startHttpListener: faile
d to listen to HTTP port for http://localhost:3938/emd/mainThey are telling you that it could not bind to that particular port number (port 3938) because something else is already bound to it.
Try (as root) -
/usr/bin/lsof -i TCP:3938which should show you information about the process(es) that are currently listening on that port.
As for -
/app/oracle/product/10.2.0/companion/Apache/Apache/bin/httpd: error while loadin
g shared libraries: libdb.so.2: cannot open shared object file: No such file or
directorylibdb is a prerequisite of installing the Apache server, I believe you can get the library as part of the Berkeley DB installation/rpm's/packages (it should be listed in the installation document).
Hope this helps. -
Problem in starting sqlplus after installing http server only on red hat linux 7.1
I have installed http server on my pc. it was installed
successfully mt http server is running on port 7777 but when i
am trying to run sqlplus from user root
/home/oracle/OraHome1/bin > ./sqlplus
it's giving msg1<lang>.msb file not found.
error 6 intializing sql*plus
but i have seen that sqlplus/message directory has msg1us.msb
file . since sqlplus is a bin file otherwise i can change it's
path. i think so.
give expert suggestions
brajesh karnWhat about your envirnoment variables (ORACLE_HOME, ORACLE_SID,
ORA_NLS33) ? -
Install Http Server in ORACLE 10g 10.2.0.3
Hi, before i had Oracle XE 10.2.0.1 and Apex 3.2 both worked ok. Now remove Oracle XE and APEX 3.2 and then installed ORACLE 10g 10.2.0.3 and Apex 4.0, but when i try to login to apex http://server:8080/pls/apex/apex_admin the login page not appears.
Before run apex with OC4J from developer suite 10g, but now i need to install some particular http server with the companion cd or something like that.
I guess i have to install http server and xml database from companion cd but which option have to choose.
RegardsPl post details of your OS. If you installed 10.2.0.3, you will also need to install the HTTP server from the companion CD.
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/overview.htm#CJAFEAJJ
http://www.oracle.com/technology/obe/apex/apexinst/apexinst.htm#t2
HTH
Srini -
Cant Install HTTP Server on SUSE10
Hello,
When I try to install HTTP Server from Oracle DB 10g Companion CD on a SUSE 10 with a working Oracle10g DB I get an error message where ever I call runInstaller so my installation never initiates.
As in the installation documentation I change my directory to "/tmp" and then from there I call runInstaller like "/media/cd_name/runInstaller". Just as I press enter I got this message " /media/cd_name/runInstaller: Line 61: /media/cd_name/install/.oui: no such file or directory"
It is also happens when I try the root user and also happens the same when I try to run the installer from a directory instead of cd.
Can Anybody help me?Hi Orlando17R,
Are you getting the following error message when installing SQL Server?
“The configuration registry key is invalid”
If that is the case, you might need to rebuild Performance Counters, for more details, please review this similar blog:
SQL Server 2008
R2 Installation Issue : ” The configuration registry key is invalid”.
However, if the issue still persists, please help to post the summary and detail logs for analysis. For more information
about how to view SQL Server Setup log files, please review this
article.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
Installing Apex 4 on Oracle 11.2.0.3 with Oracle HTTP Server on WINDOWS
Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
TIA!Vorlon1 wrote:
Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
TIA!After a database re-install on my Windows 7 laptop 2 months ago I tried to install the HTTP server but had trouble getting it to work. After a day or two I gave up and used the EPG which works with some performance issues - pages can take many seconds to render. I think there is a conflict between the EPG and security software on the laptop but have not been able to pin down the exact problem. Anyway, the EPG is not an option for you and even Oracle does not reccommend it for production implementations. The EPG is okay for quick-and-dirty R & D but real implentation should have something better. I prefer the EPG on my laptop because the Apex listener required an extra window to be open that I was likely to close by mistake (my error yes. Reality is sometimes stupid).
I have had several sucessful installs on older versions of Apex on Oracle 9 and 10 on Windows XP using the HTTP server but always struggle with the configuration; getting the settings in the .conf file (whatever it is called now) correct remains difficult (at least for me). I keep installation notes on problems encountered and their solutions. Typical issues I encounter are
1. Incorrect configuration file settings
2. Improper loading of images
3. Missing installation steps (unlocking ANONYMOUS, for instance, or not updating the PL/SQL version).
4. Make sure the correct URL is being used
5. When using the HTTP Server making sure it is running by using its URL is very heplful
Follow the installation instructions for your platform and listener. If something does not work first review the installtion instructions very carefully, then perform web searches for answers to the problem. Except for last time when I lost patience with the HTTP server the installations have always worked.
I also find Windows 7 painful - the added security prevents me from editing needed files without jumping through hoops. I don't even want to think about Windows 8 ... -
Installing SQL Server on Windows 8.1 Enterprise
I have tried to install SQL Sever 2012 Developer Edition five times on Windows 8.1 Enterprise.
I get this error:
Could not find the Database Engine startup handle
What could be causing this problem?
(Update: I just seen I have been trying to install SQL Server 2012 32-bit and not 64-bit. Could this be the problem?)I have tried to install SQL Sever 2012 Developer Edition five times on Windows 8.1 Enterprise.
I get this error:
Could not find the Database Engine startup handle
What could be causing this problem?
(Update: I just seen I have been trying to install SQL Server 2012 32-bit and not 64-bit. Could this be the problem?)
Hello,
This error generally points out to fact that account which you are using is not able to start database engine after installation or in between.There can be quite few reasons for that.I would like you to paste log file for failed installation using below
link
http://technet.microsoft.com/en-us/library/ms143702.aspx
Please make sure all previous failed installations are removed completely.
If possible create a new ID add it into local windows administrator and then try installation with that ID.Or you can login in windows with that ID .Go to setup files RK on Set.up.exe and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
How to install sql server on Windows 8
Hello Everyoene,
I want to install Sql server express or any free edition of sql server in Windows 8. Can some one suggext how to do this?
Regards
Gautam
Gautam SHello,
The following article, although created for Windows Server 2008 R2, it still provides the steps for installing SQL Server Express Edition:
http://www.sqlcoffee.com/SQLServer2012_0017.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Installing Forms Server on Windows 2000
We installed Forms Server 6i on Windows 2000. We completed the installation successfully. When we clicked on the 'Run the Form on the Web.', it gives 'This page cannot be displayed.' error. We tried this twice, but getting same error.
Any suggestions/help is greatly appreciated.
Thanks
VL.Do you have your web server installed too?
forms server works in conjunction with your web server.
Make sure you have done the following...
Web server is listening on port 80
Forms server is running in HTTP mode. ( You may need to stop and restart the forms service in win2000 if you change this from socket in the registry )
You must also set up your virtual directorys on your web server. I used the microsoft internet information server that comes with win2000. It's an add on component on the disk. Oracle would suggest you use Oracle 9i application server ( Which is rebadged Apache )
Forms server is running on port 9000. Also set in the registry.
You also edit the in the formsweb.cfg file in <ORACLE_HOME>\forms60\server
Make sure HTTP mode is set in this too. You can also change various params such as the applet size etc. I would recommend the Oracle look and feel and run in separate windows options.
All the forms tester does is run a bit of cgi which will dynamically change the base HTML file in <ORACLE_HOME>\forms60\sever.
You will notice there is one file which is baseie and basejint. The cgi will choose to use the one depending on if you choose to use jinitiator or ie50=native.
When you go live can maually edit these files depending on what java viutual machine you choose. You can place this file in your web site root as defaut.htm or whatever you want and it will serve you app without using the cgi html generator.
Sorry if parts of this you know but it took me weeks of work to set this up. The Oracle documentation is not very well put together.
I have read nearly every line of the damn stuff.
Please e-mail me if you have any queries as I may have not made sense in places.
Oliver
null -
Not able to install SQL server on windows 7 - Installation halts during pre-installation.
Hi Team,
Am not able to install SQL Server on my windows. i have checked several links and sites. But nothing helped. Following is captured in the boot strap logs.
2014-09-19 12:31:48 Slp: Running Action: StartSqmSession
2014-09-19 12:31:48 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-09-19 12:31:48 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2014-09-19 12:31:48 Slp: Sco: Attempting to get registry value CustomerFeedback
2014-09-19 12:31:48 Slp: SQM is opted-out by command line parameter /SQMREPORTING or registry key setting, SQM session is closed
2014-09-19 12:31:48 Slp: Completed Action: StartSqmSession, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: ValidateSettingsAgainstScenario
2014-09-19 12:31:48 Slp: Scenario: RunRules
2014-09-19 12:31:48 Slp: Completed Action: ValidateSettingsAgainstScenario, returned True
2014-09-19 12:31:48 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunDiscoveryAction
2014-09-19 12:31:48 Slp: Running discovery on local machine
2014-09-19 12:31:48 Slp: Discovery on local machine is complete
2014-09-19 12:31:48 Slp: Completed Action: RunDiscoveryAction, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: DiscoverClusterData
2014-09-19 12:31:48 Slp: Completed Action: DiscoverClusterData, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunStandaloneRules
2014-09-19 12:31:48 Slp: Running in UI mode, unattended rules execution skipped.
2014-09-19 12:31:48 Slp: Completed Action: RunStandaloneRules, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunRulesUI
2014-09-19 12:31:48 Slp: Start Action: RunRulesUI
2014-09-19 12:31:48 Slp: Configuration file: D:\Setup\SQL2008_R2\Standard Edition\x64\configuration.uicfg
2014-09-19 12:31:48 Slp: Adding registration information 'ShowWizard' for type 'Microsoft.SqlServer.Management.ActionHandlerInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'InstallWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'InstallClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'AddNode' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RemoveNode' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PrepareClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'CompleteClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'UninstallWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'UpgradeWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'ComponentUpdate' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RepairWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RunRulesUI' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'EditionUpgradeWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PatchWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RemovePatchWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PrepareImageWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'CompleteImageWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:49 Slp: Rules to be checked: OsVersionCheck;ThreadHasAdminPrivilegeCheck;RebootRequiredCheck;WmiServiceStateCheck;AclPermissionsFacet;MediaPathLength;SetupCompatibilityCheck
2014-09-19 12:31:49 Slp: If any rule does not pass, setup can still continue: True
2014-09-19 12:31:49 Slp: Adding rule result notification channel: RulesEngineNotificationChannel
2014-09-19 12:31:49 Slp: Loading rule: OsVersionCheck
2014-09-19 12:31:49 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetOsInfo
2014-09-19 12:31:49 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: ThreadHasAdminPrivilegeCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetAdminCheck
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: RebootRequiredCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetRebootRequired
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: WmiServiceStateCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.WmiServiceInfo
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: AclPermissionsFacet
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.AclPermissionsFacet
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: MediaPathLength
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.MediaPathLenghtFacet
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: SetupCompatibilityCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Executing rules engine...
2014-09-19 12:31:50 Slp: Completed Action: RunRulesUI, returned True
2014-09-19 12:31:50 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:50 Slp: Running Action: GatherUserSettings
2014-09-19 12:31:50 Slp: Start rule execution, total number of rules loaded: 7
2014-09-19 12:31:50 Slp: Initializing rule : Minimum operating system version
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetOsInfo
2014-09-19 12:31:50 Slp: Rule 'OsVersionCheck' detection result: major=6, minor=1, SP=1
2014-09-19 12:31:50 Slp: Evaluating rule : OsVersionCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The operating system version meets the minimum requirements for this product.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Setup administrator
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetAdminCheck
2014-09-19 12:31:50 Slp: Rule 'ThreadHasAdminPrivilegeCheck' Result: Running thread has administrator privilege.
2014-09-19 12:31:50 Slp: Evaluating rule : ThreadHasAdminPrivilegeCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The account running SQL Server Setup has administator rights on the computer.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Restart computer
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetRebootRequired
2014-09-19 12:31:50 Slp: Rule 'RebootRequiredCheck' results: IsRebootNotRequired=True
2014-09-19 12:31:50 Slp: Evaluating rule : RebootRequiredCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The computer does not require a restart.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Windows Management Instrumentation (WMI) service
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.WmiServiceInfo
2014-09-19 12:31:50 Slp: Rule 'WmiServiceStateCheck' detection result: WMI Service is running
2014-09-19 12:31:50 Slp: Evaluating rule : WmiServiceStateCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The Windows Management Instrumentation (WMI) service is running.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Consistency validation for SQL Server registry keys
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.AclPermissionsFacet
2014-09-19 12:31:50 Slp: Launching external tool: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x64.exe
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client\SuperSocketNetLib - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client\SuperSocketNetLib\LastConnect - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\10.50 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\1033 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\1033\CurrentVersion - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\CurrentVersion - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\MSIRefCount - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\ConfigurationState - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\ClientSetup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\Shortcut - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\Shortcut\SQL Server Installation Center R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER1 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER1\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\SqlRsFx0150 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\SqlSupport10R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\sql_ssms - OK.
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:50 Slp: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x64.exe exit code: 0
2014-09-19 12:31:50 Slp: Launching external tool: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x86.exe
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:51 Slp: ------------------------------------------------------------
2014-09-19 12:31:51 Slp: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x86.exe exit code: 0
2014-09-19 12:31:51 Slp: Rule 'AclPermissionsFacet' detection result: AreSqlAclPermissionsCanonical= True
2014-09-19 12:31:51 Slp: Evaluating rule : AclPermissionsFacet
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: SQL Server registry keys are consistent and can support SQL Server installation or upgrade.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Initializing rule : Long path names to files on SQL Server installation media
2014-09-19 12:31:51 Slp: Rule applied features : ALL
2014-09-19 12:31:51 Slp: Rule is will be executed : True
2014-09-19 12:31:51 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.MediaPathLenghtFacet
2014-09-19 12:31:51 Slp: Rule 'MediaPathLength' INSTALLMEDIAPATH length is 47
2014-09-19 12:31:51 Slp: Evaluating rule : MediaPathLength
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: The SQL Server installation media is not too long.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Initializing rule : SQL Server Setup Product Incompatibility
2014-09-19 12:31:51 Slp: Rule applied features : ALL
2014-09-19 12:31:51 Slp: Rule is will be executed : True
2014-09-19 12:31:51 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck
2014-09-19 12:31:51 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-09-19 12:31:51 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\100\Bootstrap\Incompatibilities
2014-09-19 12:31:51 Slp: Searching for reg path SOFTWARE\Microsoft\Microsoft SQL Server\100\Bootstrap\Incompatibilities. Open subkey result is False
2014-09-19 12:31:51 Slp: Regkey not present. No incompatibilities
2014-09-19 12:31:51 Slp: Incompatibility detected = False
2014-09-19 12:31:51 Slp: Evaluating rule : SetupCompatibilityCheck
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: Setup has not detected any incompatibilities.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Saving results to datastore...
2014-09-19 12:31:51 Slp: Saved to directory.......C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm
2014-09-19 12:31:51 Slp: Sco: Attempting to create directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources
2014-09-19 12:31:51 Slp: Sco: Attempting to create directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources, security descriptor
2014-09-19 12:31:51 Slp: Sco: Attempting to set directory full path
2014-09-19 12:31:51 Slp: Sco: Attempting to normalize directory path C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources
2014-09-19 12:31:51 Slp: Sco: Directory 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources' already exists, skipping creation, moving to set security descriptor.
2014-09-19 12:31:51 Slp: Sco: Attempting to set security descriptor for directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources, security descriptor
2014-09-19 12:31:51 Slp: Sco: Attempting to check if directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources exists
2014-09-19 12:31:51 Slp: Sco: SDDL is NULL/empty and overwriteSecurityDescriptor is false, so nothing to do, return.
2014-09-19 12:31:51 Slp: Generating HTML report by applying XsltTransformation and saving to Log folder...
2014-09-19 12:31:51 Slp: Rules evaluation report is available now at C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm
2014-09-19 12:31:54 Slp: Completed Action: GatherUserSettings, returned True
2014-09-19 12:31:54 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:54 Slp: Running Action: Progress
2014-09-19 12:31:54 Slp: Completed Action: Progress, returned True
2014-09-19 12:31:54 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:54 Slp: Running Action: Close
2014-09-19 12:31:54 Slp: Stop Action
2014-09-19 12:31:54 Slp: Completed Action: Close, returned True
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp: Setup result: 0Hi,
Iam try to install Microsoft SQL Server 2008 R2 on Windows 7.
Following is the contents from summary file.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Exit message: Passed
Start time: 2014-09-19 12:31:55
End time: 2014-09-19 12:32:16
Requested action: ComponentUpdate
Machine Properties:
Machine name: J1018165WIN7LT
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Setup\SQL2008_R2\Standard Edition\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: ComponentUpdate
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
PASSPHRASE: *****
PID: *****
QUIET: False
QUIETSIMPLE: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm -
Installing oracle server on windows xp !!!!!
Is it possible to install oracle application server 10g AND oracle developer suite 10g on my home PC under Windows XP ....
If yes, How to do it for Apllication server 10g ... PLs steps
Thanks alotThanks for you...
But i have 1 GB ram my pc p4-1700 ??? Is it will work ??
last question IS it i need to install oracle server or not ,because i have project and i need to test it ...... -
How to install HTTP Server in a Linux Machine for running APEX
I've Installed Unbreakable Linux 4.7 and I'm using the standard apache which comes (Apache 2), I want to install the HTTP Server in order to run APEX on this machine, and may it look the data from the database which is oracle 10g (The database is on another machine). Could both installations of apache and Oracle http server co-exists and what is the best form to do it??
Yes, they can. They installed in different directories and you have to use different ports.
AFAIK for HTTP for APEX is either part of the installation (eg. in the Oracle Express Edition) or part of the Oracle Installation CDs. For more information see the Oracle Installation Documentation.
--olaf -
Installing HTTP Server After APEX2.2
Hiii
i have installed the APEX 2.2 and after i have finished i remembered that i have to install the HTTP Server os installed it ....
but i dont know if it will Succeed or NOT ...
now i am in the POST INSTALLATION TASKS ON
" Configuring Oracle HTTP Server 10g or Oracle Application Server 10g in a New
Installation"
WHAT DO YOU THINK .........???James,
The key parts in that output are -
2006-10-30 16:20:52 Thread-4136076976 ERROR http: snmehl_allocateListenerPort: f
ailed to bind socket: Address already in use (errno=98)
2006-10-30 16:20:52 Thread-4136076976 ERROR http: nmehl_startHttpListener: faile
d to listen to HTTP port for http://localhost:3938/emd/mainThey are telling you that it could not bind to that particular port number (port 3938) because something else is already bound to it.
Try (as root) -
/usr/bin/lsof -i TCP:3938which should show you information about the process(es) that are currently listening on that port.
As for -
/app/oracle/product/10.2.0/companion/Apache/Apache/bin/httpd: error while loadin
g shared libraries: libdb.so.2: cannot open shared object file: No such file or
directorylibdb is a prerequisite of installing the Apache server, I believe you can get the library as part of the Berkeley DB installation/rpm's/packages (it should be listed in the installation document).
Hope this helps. -
Installing HTTP Server on Fedora 4
I am completely stuck. I managed to install the latest release of 10G, and now I am trying to install the HTTP Server and HTMLDB on my Fedora 4 box. The problem comes when the universal installer attempts to start the HTTP server - it fails every time. I am getting the following errors in the HTTP_Server~1 log:
05/07/15 09:25:54 Start process
/usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/bin/apachectl start: execing httpd
Syntax error on line 233 of /usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/conf/httpd.conf:
Cannot load /usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/libexec/mod_auth_dbm.so into server: /usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/libexec/mod_auth_dbm.so: undefined symbol: dbm_fetch
05/07/15 09:25:56 Start process
/usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/bin/apachectl start: execing httpd
Syntax error on line 233 of /usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/conf/httpd.conf:
Cannot load /usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/libexec/mod_auth_dbm.so into server: /usr/local/server/oracle/product/10.2.0/db_1/Apache/Apache/libexec/mod_auth_dbm.so: undefined symbol: dbm_fetch
I have been searching the web for two days now, but have not found anything that fixes this issue. Can anyone here help?
Thanks in advance,
-Erich-@twilliamsebs:
I had the same problem described above, but your post actually created a lot of confusion! libdb.so.2 did not exist at first on my system. Then I read this post and added the symlink so that the
symlink /usr/lib/libdb.so.2 was pointing to /usr/lib/libgdbm.so.2.0.0 and this actually didn't change the dbm_fetch error as described above.
I found the following info after removing this symbolic link, while searching for the "libdb.so.2" being missing error:
"Configuration changes prevented server
startup.<ORACLE_HOME>/Apache/Apache/bin/httpd:
error while loading shared libraries: libdb.so.2: cannot open shared object
file: No such file
or directory"
Analysis:
-Problem accessing /usr/lib/libdb.so.2
-Either permission problem, or file does not exist, etc
Conclusion:
-libdb.so.2 is from gnome-libs-1.4.1.2.90-34.1.i386 (RHEL3 for x86)
-This is a pre-req as listed in note:269557.1
-libdb.so.2 can be installed with following instructions
1. Login as root user
2. cd /
3. Obtain listing of files to be installed
rpm2cpio gnome-libs-1.4.1.2.90-34.1.i386.rpm | cpio -itv "./usr/lib/libdb*"
4. Install libdb.so.2 ( libdb.so.2 -> libdb1.so.2)
rpm2cpio gnome-libs-1.4.1.2.90-34.1.i386.rpm | cpio -idmv "./usr/lib/libdb*"
References
<NOTE:269557.1> - Oracle Application Server 10g (9.0.4) - Installation
Requirements for the Red Hat 3.0 Linux (AMD64)
I downloaded gnome-libs-1.4.1.2.90-34.1.i386.rpm, installed it and this created a symbolic link from libdb.so.2 -> libdb1.so.2 (which it installed) and after that everything went fine!
HTH
Maybe you are looking for
-
I'm unable to uninstall or reinstall itunes because of missing files.
I've been having trouble for about three months with installing updates and I had the last straw today so i decided to uninstall and reinstall itunes. I went to the control panel, but it wouldn't let me uninstall because of missing files. I've tried
-
There is a game I'm trying to play and I can't because the "Allow third-party Flash content to store data on your computer" option is unavailable. I looked at the solutions on the website and I have the latest version of the Flash Player installed an
-
Since installing Windows 7 professional via bootcamp onto my 2008 24" imac i have no sound. The sound worked when i had Windows xp installed. I have tried every solution suggested on various forums. Can you please help me?
-
in Finder, on shared, there are a couple of unknown computers or servers, is it that they are sneeking in my network or computer? how can I stop that? Thanx!
-
Hi, Can anyone encounter the problem that you couldn't update your apps from Mac book pro?? Currently, my mac can't update any of the software from App store as well as bulit in software like garageband.