Installing J2SE 5.0 on OSX 10.4
Just had a quick question. I've downloaded and installed 5.0 on my new powerbook, but terminal is still running 1.4.2. I found the java settings application and changed the default version to 5.0, but that seems to have done little to no good. And i've tried googling the subject to no success.
Anyone know if there are other settings i'll need to change to get this to work (I'm a convert from a PC so this sort of thing is foreign to me :) )
and that would be done...how? like I said...i'm a
little new to this.You will have to edit the environment variable and set the SDK's bin directory instead of any previous installation. I don't know how environment variables are set on OSX but you could find that out with a Google search. Once the environment variable has been set to the new value, the change should take effect.
Similar Messages
-
How do I install Mavericks without invoking the OSX Server Plugin?
How do I perfrom a clean install of Mavericks from the Recovery Partition without it automatically installing, and then invoking or executing the OSX Server Plugin that ultimately results in rendering open directory operable as well as the server. I have ignored this continously, but the other day I went into the terminal and typed ARP -s that lists the shortname for the host of my MacBook Pro and it gave a totally different name than what I had given it in the wi-fi network interface under the WINS tab. More importantly, I do not want to install open directory nor the osx server plugin as it opens up more complexity than I want to deal with. Any suggestions is greatly appreciated. BTW, below are the steps I performed for installing Mavericks.
1. Powered on the MacBook Pro and then hit the Option key.
2. This took me into the Recovery Partition, whereby I went into the Disk Util and erased or formatted the hard-drive.
3. I then clicked out of the Disk Utility and went into the Recovery Mode by clicking on reinstall the current OS.
4. I went through all the prompts and the system downloaded a current version of Mavericks.
5. After completion, I turned on my Macbook Pro and went through the prompts to install Mavericks.
6. This is all I did, and I didn't download the OSX plugin nor invoke it in the new version of the Operating System.
I just assumed that it was a standalone version until I found the server for osx running with open directory invoked, the server invoked, along
with other components relative to a new standalone version.
Again, my question is simple: How can I reinstall Mavericks without it downloading and automatically
iinvoking the components as described above?Hi. Because both Mavericks and Windows 8 are still new, they may not be free of error. Apple needs more time to perform more tests to ensure that these two different OS's will work properly without getting in conflicts. If it's posdible, I highly recommand you to downgrade back to Lion or Mountain Lion and install Windows 7 (if you have a copy of it). In my experience, all advises from Genius Bar members and computer articles confirm that Windows 7 will work on Macs with Lion OS. It should also work on Mountain Lion. Besides Boot Camp, you could try to virtualize Windows OS and its applications by using VirtualBox, CrossOver and other VMs. I already have an Oracle VirtualBox but I would like to try Boot Camp since it allows me to enjoy almost all Windows features that may be limited in VMs.
-
I installed IOUSB family log release osx 10.5.6 on my mac osx 10.5.8. I am trying to log an rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way to get my usb back working? And is there a way to navigate in Windows to the file I installed and remove it? Any help appreciated.
BDAqua wrote: Does OSX boot at all, or not?
Yes, it does. Right to where I am supposed to log in, but since the USB is not working (either mouse or keyboard), I'm stuck. I have to shut down and restart and boot into windows. -
I tried to install Photoshop CS2 on Mac, OSX, 10.9.5.
By the end of the installation, it shows, error, but no error number for reference,
The only choice is "quit".
Please helpThat is correct Das_Sad. CS2 will not run on Intel based processors under Mac OS. You will need to find a Mac computer with a PowerPC processor if you wish to run Creative Suite 2.
-
Hi experts m new to apps please help.. I have installed successfully Oracle Apps R12 on OEL - 5 All the services runining fine. but when i am opening forms its giving error "install missing plugins" i installed jre-6u7-linux-i586-rpm.bin and Mozilla Firefox 3.0.18 [root@ust ~]# cd firefox/plugins/ [root@ust plugins]# ln -s /usr/java/jre1.6.0_07/plugin/i386/ns7/libjavaplugin_oji.so ./libjavaplugin_oji.so [root@ust plugins]# ls libjavaplugin_oji.so libnullplugin.so [root@ust plugins]# ll total 20 lrwxrwxrwx 1 root root 58 Sep 11 16:22 libjavaplugin_oji.so -> /usr/java/jre1.6.0_07/plugin/i386/ns7/libjavaplugin_oji.so -rwxr-xr-x 1 root root 19160 Sep 15 2007 libnullplugin.so [root@ust plugins]# but when m trying to open forms at that time giving error "install j2se plugin version 1.6.0_07 on your client and NPX_PLUGIN_PATH environment variable set before starting Netscape."
Linux is not a certified client tier for accessing EBS
Unable to access r12 forms in linux client
https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=linux+client&rankBy=relevance&contentTyp…
HTH
Srini -
I installed j2se 5.0, but i can't get it to work
Help! I installed j2se 5.0, but i can't get it to work.
I tried to change to change directory which is cd.. on the cmd.
i got the error message "cd.. is not recognied as internal or external command.
I will really appreciate if anybody can help me to set it up so I can compiled the code
thanksRead this:
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/win32.html -
Installed j2se on windows xp, updated path, but can't find compiler
I installed j2se on windows xp, updated path, but no matter what direc-
tory I try, when I try to compile(javac) I get the "'javac' is not
recognized as an internal or external command, operable program or batch
file" message. This even happens in the C:\program files\java\j2re1.4_01\bin directory! Anybody know what's up?j2re (run-time env) does not have javac. I ran into same problem with
sdk -- j2se. I invoke following commands if invoking java commands
from DOS cmd.exe window. (You can move these commands in a 'bat' file'.)
@echo off
set JAVA_HOME=c:\jdk1.3.1_06 -- where you installed j2se
set PATH=%JAVA_HOME%\bin;%PATH% -
Installing J2SE 1.4.2_05 on Windows 2000
Hi all,
I have been trying to install J2SE 1.4.2_05 on Windows 2000, ( the program for installing the same had been downloaded from java.sun.com site) the size of the file which i downloaded was of 356Kb.
When i tried to install the same i got an error saying Error 1606 :could not access network location http://java.sun.com/webapps/download/getfile/1.4.2_05-b04/windows-i586/sd142000.cab . While on the same network when i tried to install on some other machine it didnt gave me any error, the installation went on wery smoothly.
Any suggestions or ideas regarding the same are highly appreciated.
Thanks In Advance.It might have been the network. Why don't you download the complete thing and install instead of that remote installer?
-
Error Installing J2SE v1.4.2 on WinMe
Hello,
While trying to install J2SE v 1.4.2 with NetBeans IDE v 3.5 Cobundle, the installation proceeds until it reaches 6%, then a DOS windows running command.com pops up for a few seconds, dissapears, and the installation progress stops. I checked the intallation log in the destination directory and I get the following message:
"Installing J2SDK..."
"ERROR: j2sdk installer not found"
Can anyone help me?
ThanksI give up. I decided to download the NetBeans 3.5 installer. I already had the sdk installer from the cobundle, so I installed the sdk and jre, then I erased the NetBeans directory and the uninst directory created by the cobundle installer (I left jvm just in case) and then I installed NetBeans. I think everything works ok.
My advice, forget the cobundle and download separately (or if you already have the cobundle, get the sdk installer from the _uninst directory when the cobundle gets stuck and download the NetBeans installer). -
Does Installing J2SE 5.0 Break any Applications?
1. Does J2SE 5.0 contain a newer JRE, and if so does installing J2SE 5.0 Break any Applications due to the new JRE?
2. What information frrom the operating system do Java Applications need in order to find the "correct" version of JRE. Do they get information from the registry or the path.
3. Is there a reason to continue using an older JRE, and if so, how would one do it?
4. Does Sun publish any application notes that address the above questions?1. Does J2SE 5.0 contain a newer JRE, and if so does
installing J2SE 5.0 Break any Applications due to the
new JRE?A few small incompatibilities. A simple test should reveal them quite quickly.
>
2. What information frrom the operating system do
Java Applications need in order to find the "correct"
version of JRE. Do they get information from the
registry or the path.If you use Java Web Start it will do this automatrically.
>
3. Is there a reason to continue using an older JRE,
and if so, how would one do it?You would use an old version if you have third party software which is not supported for a newer version.
Use Java Web Start.
>
4. Does Sun publish any application notes that
address the above questions?Yes. -
Install Flash Player 9 for OSX
I’ve installed Flash Player 9 for OSX and it
doesn’t seem to work. I’m not experiencing anything
similar to previous threads. I don’t get any errors and the
installation seems to go fine but when I return to any site that
requires Flash Player 9 it tells me that I need to install the
latest version, which I’ve done. I’ve even uninstalled
and then reinstalled with the same result. Did I miss something
here?I have been having the same problem since installing Leopard.
I have tried suggestions from others:
there are no browsers running when I install Flash Player
I have repaired permissions (both before and after
installing)
I have uninstalled before reinstalling
None of these work. I am unable to view Flash content in
Safari, Firefox or Internet Explorer. I am using a G5 Mac desktop
and have had no previous problems with the Flash player on this
machine. -
Error while installing J2SE 5.0 update 6
i got the following error msg while installing J2SE 5.0 update 6
Error 1722. There is a problem with this windows installer package. A program run as part of the setup did not finish as expected . contact your support personnel or package vendor.And from the Installation Notes:
Choosing an installation path containing characters that are not part of the system code page - On Windows 2000, XP, and 2003, it is possible to name directories using characters that are not part of the system locale's code page. If such a directory is part of the installation path, then error 1722 occurs, and installation is not completed.
To prevent this problem, make sure that the user and system locales are identical, and that the installation path only contains characters that are part of the system locale's code page. User and system locales can be set in the Regional Options or Regional Settings control panel.
The associated bug number is 4895647. -
Trying to install the FolioProducerTools-CS55 (Mac OSX)
Trying to install the FolioProducerTools-CS55 (Mac OSX), but running into a "damaged" installer error. Why would I receive a damaged error? Where can I find the latest toolset for InDesign CS5.5?
Don’t bother. DPS is no longer supported in CS5 or CS5.5.
-
I want to install an older version of OSX
I bought a used Mac Mini (Mid 2010) that has Mountain Lion installed. I want to erase the drive and reinstall Snow Leopard. How do I go about installing an older version of OSX?
Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
How to install oldest version of mac osx
guys i need to install oldest version of mac osx
im using 10.6.3 but i need to install back to 10.5.8
please help me outHow to instal oldest mac osx wrote:
15 inc
2.8 ghz
4 g ram i've got and also originally i've got mac osx 10.6 dvd.
but i need to install 10.5.8
coz my connectiv box driver approve only 10.5.8
According to Mactracker, given the size of the screen and the CPU speed your MBP could be one of these models:
- MacBookPro5,1, which originally shipped with OS X 10.5.5
- MacBookPro5,3, which originally shipped with OS X 10.5.7
Since they originally shipped with OS X 10.5, the system disc that came with your MBP may have 10.5 on it. If so, you should be able to do a reinstall from the original disc. If you do a full backup to another volume before you do that, you can recover your data from the backup to your MBP. However, some migrating some of the data (such as Mail messages) may be tricky due to format changes.
Maybe you are looking for
-
Cisco VPN Client is not opening on windows 7 64bits
Hello, My problem : i instaled Cisco VPN client 5.0.07.0440-k9 on Windows 7 64 bits, the installation ends successfully. But when i restard the computer, when i click it doesnt open. Notice : when i restard the computer, it takes an infinite time th
-
I have changed the configuration of the firefox and I want to change it back
some days ago I have changed the configuration of the my Firefox to have a Firefox with higher speed. But after changing I found that the speed has became slower. I want to change the configuration back to its original setting. Please let me know if
-
Is there an alternative to prevent access to a transaction?
Hello Everyone! Is there an alternative to prevent access to a standard transaction when a user has the S_TCODE value already? A custom program was created through batch input recording and there are transaction calls made to the standard transaction
-
Safari Universal can't access my passwords unless it's running in Rosetta
I just got a new iMac Core Duo yesterday and I've run into this frustrating problem. Thankfully I've narrowed down the issue and found a workaround, but needless to say I would much rather use Safari natively! When it's running in Intel mode, it does
-
HT4191 how do i download contacts from my phone to my computer
How do I download my contacts from my I phone 5 to my computer?