Installing MaxDB client on Win7 64bit and connect to 32bit server

Hi everyone,
I'm trying to install a MaxDB client on my 64 bit Win7-System in order to use the BO universe designer. And basically it does't work because the db server is 32bit. I tried to:
1. Install the 64bit client driver -> The connection assistant moans about wrong architectures between application driver and database
2. Install the 32bit client driver and hope that Win7 does not complain -> The installer quits because of the wrong architecture. I'm aware of the 32bit database administrator in Win7 (C:\Windows\SysWOW64\odbcad32.exe) but as long as it is not possible to install the driver this solution is not applicable
3. Use the virtual XP mode -> Installation of the 32bit driver is possible without any problems. Then, the only problem is to access the driver. Unlike the usual "start XP mode application" (accessible via the start menu), the drivers are only registered in the virtual machine. Consequently, I had to install the whole BO package in the virtual machine as well. This works fine, but running the universe designer on the Win7 system in a virtual XP machine just does't feel right
Any ideas to resolve this issue? Maybe "force" the MaxCB 32 bit client into installation?
Thanks in advance,
Frank

> I'm trying to install a MaxDB client on my 64 bit Win7-System in order to use the BO universe designer. And basically it does't work because the db server is 32bit. I tried to:
Sorry, but that's nonsense.
The byte-version of the client has nothing to do with the servers byte-version.
Connect 32 to 64? Works!
Connect 64 to 32? Works!
Connect 32 to 32? Works!
Connect 64 to 64? Works!
The client software really is independent from the MaxDB server software.
What's not independent is the byte-version of the application you want to use with the 32-bit client software.
In this case, the byte-version of the BO universe designer.
> Any ideas to resolve this issue? Maybe "force" the MaxCB 32 bit client into installation?
Since I'm not (yet) familiar with the universe designer software ... is this a 32-bit software?
Have you already opened a support message to get an answer from the BO support collegues?
Is the BO universe designer officially supported on Windows 7/64-Bit at all?
regards,
Lars

Similar Messages

  • Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

    Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

    In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade?  If so you need to update via 10.6.6 to 10.6.8.  These updates can correct minor system upsets.  
    And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

  • Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

    hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

    BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
    Mylenium

  • 3rd node is taking 15% of CPU without any load and connection on the server

    Hi,
    I am struggling to resolve the 3rd node is taking 15% of CPU without any load and connection on the server. but not find clues for this. Please give me some inputs.
    The issue is:
    We have 8 databases on our 3node RAC (11.2.0.1). One of the performance team guy reported that 3rd node is taking 15%cpu utilization when there is no load and connection to the database and at that time the other 2 node are taking only 1%cpu. even i have checked it by using top command and it is almost given same results.
    To come out of this issue, i have two solution in my mind, but i am not sure whether this approach is good or bad. the plans are
    (1). shutdown the databases and check the cpu usage. --to findout is there any thing wrong with Kernel parameters or at system level.
    (2). Shutdown the databases and CRS on the 3rd node and reboot the server.
    If above process is correct then i need to take permission from my manager.
    I am total stuck, what i need to do. Is there any other approach to resolve this issue. Please help me, this is very critical issue for me.
    Also i have checked from GV$SESSION for the active session, but i didn't find any connection apart from oracle processes.
    Thanks in advance.

    Thank you Guzma for your suggestion,
    When i checked the gv$session for the active sessions from only 2databases, Do i need to check in all the databases and make sure there are no active session and try for the 1st solution.
    -more over i have observed that one of the oracle process is taking 99% of the 15%cpu when i checked from top command. i have tried to find out the what the session is from below, but it given no results from the 2of the DB's.
    top - 13:43:27 up 28 days, 2:44, 1 user, load average: 8.62, 7.90, 6.46
    Tasks: 1275 total, 11 running, 1264 sleeping, 0 stopped, 0 zombie
    Cpu(s): 37.3%us, 6.9%sy, 0.0%ni, 44.3%id, 3.9%wa, 0.2%hi, 7.4%si, 0.0%st
    Mem: 32830792k total, 32440660k used, 390132k free, 2888k buffers
    Swap: 32764556k total, 9553692k used, 23210864k free, 20920068k cached
    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    17870 oracle 25 0 4254m 111m 102m R 94.6 0.3 35345:34 oracle
    8332 oracle 15 0 9151m 676m 639m R 27.9 2.1 2:03.00 oracle
    18062 oracle -2 0 9151m 4.5g 4.5g S 13.5 14.5 3049:49 oracle
    18058 oracle -2 0 9151m 4.5g 4.5g S 12.8 14.5 2948:39 oracle
    SQL>select p.spid,s.sid,s.serial#,s.username,s.status,s.last_call_et,p.program,p.terminal,logon_time,module,s.osuser
    from gV$process p,gV$session s where s.paddr = p.addr and p.spid=17870 ; 2
    no rows selected.
    in database level, will some of the session or processes hangups fro some reason?
    thanks,
    Hari

  • Re: Installing XE Client en Windows 7 and using OLEDB

    I'm having this problem also. I support a number of apps that use the Oracle OLE DB provider and now the provider isn't working in Windows7 with Oracle 11g. The machines that had Windows XP at first got the same runitme 3706 "Provider not found" error that the Windows 7 users are getting, but I registered the provider using regsvr32 OraOLEDB11.dll. I'm still getting the error with the Win7 users, however. I downloaded ODAC on my home Win7 machine and confirmed that even after registering with both version of regsvr32 (and a reboot), the OLE DB provider doesn't show in an a .udl file like all of the other installed OLE DB providers. I got the "regsvr32 succeeded" message at the end, but nothing in .udl.
    Will someone from Oracle please look into and comment on this!? This is a big problem!

    Hi there !
    I have the same problem On Windows 7 Professional 32bits (on several PC).
    After installing XEClient as an Administrator.
    I can't connect to my server with OLEDB (MS Access 2010).
    I have error message "provider not found" or sometimes it will just crash without going to VBA error handler !
    If I "regsvr32 OraOLEDB10.dll" sometimes it works an sometimes it does not.
    But anyway it won't help for the connexion.
    Sometimes launching sqlplus will crashes also ! But will work if I launch it as a Administrator.
    There is a workaround : installing OracleXE (the database) on the same machine will resolve the problem..
    Then we can just stop the unused Oracle services with MSConfig.
    When I install OracleXE.exe I see that my user get the ORA_DBA groupe...
    If someone can help finding a better solution...
    Thx all !

  • Installing XE Client en Windows 7 and using OLEDB

    Hello,
    I'm trying to use XECLient with OLEDB on Win 7 but when installing XE client on Windows 7, the "Oracle Provider for OLE DB" doesn't appear in the Providers List (ex : in a udl file).
    I've tried to do this "regsvr32 OraOLEDB10.dll" and this is ok (dll registered successfully). But still no Oracle Provider !
    I need help please !
    Thanks.

    Hi there !
    I have the same problem On Windows 7 Professional 32bits (on several PC).
    After installing XEClient as an Administrator.
    I can't connect to my server with OLEDB (MS Access 2010).
    I have error message "provider not found" or sometimes it will just crash without going to VBA error handler !
    If I "regsvr32 OraOLEDB10.dll" sometimes it works an sometimes it does not.
    But anyway it won't help for the connexion.
    Sometimes launching sqlplus will crashes also ! But will work if I launch it as a Administrator.
    There is a workaround : installing OracleXE (the database) on the same machine will resolve the problem..
    Then we can just stop the unused Oracle services with MSConfig.
    When I install OracleXE.exe I see that my user get the ORA_DBA groupe...
    If someone can help finding a better solution...
    Thx all !

  • C1 on Win7-64Bit and snapins

    Hi there,
    i have just switched to Win7-64Bit.
    Now, how i get C1 running with ALL snapins (i need the Zen7 management
    snapin) !!
    MayBe someone can help me plaese !!
    Regards
    Thorsten

    Definitely not supported, since that tool just calls to the unsupported
    Novell Snapins.
    Definitely a Virtual PC or Terminal Connection to a Supported OS.
    On 10/29/2010 7:39 AM, Thorsten Grund wrote:
    > do you think this http://www.hdopp.de/software/S-ZENworksBrowser.html is
    > working ?
    >
    >
    >
    >
    >>>> smflood<[email protected]> 29.10.2010 12:06>>>
    >
    > Thorsten Grund;2039244 Wrote:
    >> i have just switched to Win7‑64Bit.
    >> Now, how i get C1 running with ALL snapins (i need the Zen7 management
    >> snapin) !!
    >>
    >> MayBe someone can help me plaese !!
    >
    > The only version of ConsoleOne supported on Windows 7 is the version
    > included with GroupWise 8 Support Pack 1 or later.
    >
    > As such it is only supported for managing GroupWise objects and I don't
    > know whether the ZEN 7 plugins would work.
    >
    > I suspect you would be better offer creating a virtual machine (using
    > VirtualBox or VMware Player) to run Windows XP as a guest OS for using
    > ConsoleOne to manage your ZEN 7 objects.
    >
    > HTH.
    >
    >
    > ‑‑
    > Simon
    > Novell Knowledge Partner (NKP)
    >
    > ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑�
    > ��‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑‑�
    > �‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑
    > Do you work with Novell technologies at a university, college or
    > school?
    > If so, your campus could benefit from joining the Novell Technology
    > Transfer Partners (TTP) group. See www.novell.com/ttp for more
    > details.
    > ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑�
    > ��‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑‑�
    > �‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑
    > ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑�
    > ��‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑‑‑‑‑�
    > �‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑‑‑
    > smflood's Profile: http://forums.novell.com/member.php?userid=617
    > View this thread: http://forums.novell.com/showthread.php?t=424666
    >
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Online edit with word2007 win7 64bit and ecm11g

    hi all,
    I am using wc11gPS4 with ecm11g on win7 64bit, I configured wc with ecm, I used default content page in my groupspace, uploaded a word file, right click it, on the popup menu, select edit with word, I was prompted to enter username and passwd, I inputed the correct info, but never passed verification, is there any suggestion on this?
    word version is office 2007.
    This test is based on the changing of default registry table:
    In HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
    I changed the value for "BasicAuthLevel" to "2" (decimal),hope this was not the reason, I did this for making webdav worked(webdav still doesn't work)
    Best regards
    .

    Hi
    Do you see the same behavior when doing editing for word files from DIS or WebDAV ?
    Thanks
    srinath

  • Problems installing CS6 Upgrade on Win7 64Bit

    I purchased the upgrade from CS4 to CS6 Design and Web Premium.  I've tried 4 times now to install, with  varying degrees of success.  The first attempt installed about half the products and gave an enormous error list. The second installed everything except Acrobat and InDesign. Subsequent attempts to install just these two additional programs always give an "Installation Failed", and a seemingly common problem across all latest versions and operating systems of the installer failing to access certain files/folders.
    EDIT: The installer also always says that the machine needs a reboot, when it has just been re-booted and certainly doesn't!  I continue anyway.
    I have already cleared the Temp folder with no difference, and NIS2012 is disabled during the install.
    Any ideas of how to get these vital last two programs to install please?
    My latest installation log is:-
    Exit Code: 7
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF024, DW063 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 52 error(s), 0 warning(s)
    ----------- Payload: {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0 -----------
    ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{539AEF15-3A2B-4A31-A587-7E90F7D9C700}\_464_81cd902968d7 fd801cbc3330bb0e41b9" to "C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Canon EOS-1Ds Mark II\Canon EOS-1Ds Mark II Camera Standard.dcp" Error 32 The process cannot access the file because it is being used by another process.(Seq 464)
    ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 464)
    ----------- Payload: {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0 -----------
    ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{8706963D-5F48-47CC-998B-DAB70B089DB8}\_29_fe89ef03bbfb8 68d96427c4cc0f8ec2a" to "C:\Program Files (x86)\Common Files\Adobe\ssc\VideoSuitePremium-CS6-Mac-GM\SLConfig.xml" Error 32 The process cannot access the file because it is being used by another process.(Seq 27)
    ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 27)
    ERROR: DF024: Unable to restore file at "C:\Program Files (x86)\Common Files\Adobe\ssc\CreativeCloud-CS6-Mac-GM\SLConfig.xml" from backup at "C:\adobeTemp\backup\adobetmp04669361" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
    ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 2)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe XMP Panels: Install failed
    ERROR: DW050:  - AdobeColorCommonSetCMYK CS6: Install failed
    ERROR: DW050:  - AdobeColorEU CS6: Install failed
    ERROR: DW050:  - Adobe Toolhints CS6: Install failed
    ERROR: DW050:  - AdobeColorJA CS6: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Icon Handler x64: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_GB: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe Player for Embedding 3.3: Install failed
    ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed
    ERROR: DW050:  - CS6 Design and Web Premium: Install failed
    ERROR: DW050:  - AdobeColorNA CS6: Install failed
    ERROR: DW050:  - DPS Desktop Tools CS6: Install failed
    ERROR: DW050:  - Camera Profiles Installer: Install failed
    ERROR: DW050:  - AdobePDFL CS6: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
    ERROR: DW050:  - Adobe Hunspell Linguistics Plugin CS6: Install failed
    ERROR: DW050:  - PDF Settings CS6: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS6: Install failed
    ERROR: DW050:  - Adobe NPS Panel: Install failed
    ERROR: DW050:  - Suite Shared Configuration CS6: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Application Language Files_AdobeInDesign8AppLang-en_GB: Install failed
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS6: Install failed
    ERROR: DW050:  - Adobe Bridge CS6: Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x86): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed
    ERROR: DW050:  - AdobeTypeSupport CS6: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Common Base Files: Install failed
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Application Feature Set Files: Install failed
    ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed
    ERROR: DW050:  - AdobeColorCommonSetRGB CS6: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Application Base Files: Failed due to Language Pack installation failure
    ERROR: DW050:  - Photoshop Camera Raw 7: Install failed
    ERROR: DW050:  - AdobeHelp: Install failed
    ERROR: DW050:  - Adobe Linguistics CS6: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - DynamiclinkSupport: Install failed
    ERROR: DW050:  - AdobeCMaps CS6: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS6: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Icon Handler: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed
    ERROR: DW050:  - Adobe Media Encoder CS6 X64: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Application Base Files2: Install failed
    Thx
    Colin
    Message was edited by: cdyckes

    Mylenium,  I've checked for any instances of ther installer, and rebooted, several times - same result.
    I've also uninstalled, rebooted, and then done a new install of CS6. This gave the following errorlog, and rolled back the installation of Acrobat after a desktop icon had appeared, and also InDesign.
    Much closer to a working install this time, but says it can't find some language specific files, abd I still get one 'file in use error'. Would it be worth dowbloading the 'trial' installer disc (if that's possible), as I guess it's still early in the CS6 release cycle?
    I've downloaded the Cleanup utility, but a brief look at the instructions worries me as it seems to say it will delete all CS related user files (presumably it deletes the folder tree), and will it leave my working CS4 alone as I'm stuck otherwise?
    Thx
    Colin
    Error Log:-
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF024, DW063 ... WARNING: DF012, DF029 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 9 error(s), 3 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1920.Service Print Spooler (Spooler) failed to start.  Verify that you have sufficient privileges to start system services.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1920.Service Print Spooler (Spooler) failed to start.  Verify that you have sufficient privileges to start system services.
    ----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
    ----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
    ----------- Payload: {CFB770D7-8D43-1014-922B-CC2715FADE3F} Adobe InDesign CS6 Application Base Files 8.0.0.0 -----------
    ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{CFB770D7-8D43-1014-922B-CC2715FADE3F}\_6001_36615b89507 a25de72df5bd31029ac5b" to "C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\(Print Resources)\idrc_SCMA\70.idrc" Error 32 The process cannot access the file because it is being used by another process.(Seq 5955)
    ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 5955)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_GB: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Application Language Files_AdobeInDesign8AppLang-en_GB: Install failed
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Adobe InDesign CS6 Application Base Files: Failed due to Language Pack installation failure
    System Requirements <http://www.adobe.com/go/cs_systemreqs_uk>
    f3549b47-902a-4290-a52e-0338c8d202ae
    file:///C:%5CUsers%5CColin%5CAppData%5CLocal%5CTemp%5C%7B46282235-8B4B-4CD7-9CAC-EAB44FB0F 028%7D%5Csummary.htm

  • HP 8500 Printer and Connection to eprint server

    Refurbished Printer: HP Officejet Pro 8500 Premium A910 n (Changes status from new to refurbished 02-17-2011)
    ISP: ATT DSL
    Modem/Router: 2wire new from Best Buy. It is white with ATT logo on it. Is using latest firmware.
    Network: ethernet
    The printer downloaded and installed a firmware update after initialization. So it is connected to the internet.
    It then tried to register to the eprint server and said it cannot connect to eprint server.
    The printer functions normally in every way except it will not register to eprint server.
    Numerous calls and hours with HP Support rebooting, resetting and everything else under the sun have done nothing.
    I tried setting IP and DSN addresses per all the suggestions in these forums and nothing works.
    Could there be an issue with the HP Sever? Does it really exist? Are there compatibility issues with 2wire router.
    ATT did remote session on my computer and could find nothing they could do. They were able to plot a test page remotely.
    Any suggestions or help would be greatly appreciated. Thanks.
    NEW INFORMATION (02-11-2011):
    I noticed today while looking at the EWS that the printer SSID is not the same as the router, but it was grayed out. Does this matter for ethernet? If so how do I change it? I do not think this matters for ethernet.
    NEW INFORMATION (02-12-2011):
    The support team at 2wire have given me procedure to completely open all in and out traffice to the printer. They said if this does not work then the problem is with the eprint server. I will try this on Monday, but I expect there is a communication problem between the printer and the eprint server that has nothing to with anything at my location or my ISP. Is there any way to check the server this printer is trying to connect to? Where is it? Is it operational? If not, is it rerouting properly to an operational server? The printer must be trying to access a particlar IP address or DNS to establish communication.
    NEW INFORMATION (02-14-2011):
    Per the instructions from 2wire support team I opened all ports and allowed all services then turned the printer off and on. It did not work. The printer will not connect to the HP eprint server. So the problem is with the HP eprint server. This printer is programmed to look somewhere for a server to connect to. Where is it? Is it operational? Why will not allow a connection? HP the ball is in your court. What can we do?
    I have ATT DSL at work and Charter Cable service at home. The problem is the same for both locations and ISP's. Is there anyone out there has connected that has ATT DSL or Charter Cable? If so what are your settings?
    NEW COMMENT (02-15-2011)
    Can anyone at HP tell me why the printer will connect to the HP Server and download the firmware update, but will not connect to the HP Server to register to eprint? It all seems to be on HP's side. When will we get a fix?
    NEW COMMENT (02-16-2011)
    The model number is blank in the engineering menu and the printer diagnositc page. If this is an issue can it be added with a firmware update? Do I need to get money back for this one and buy a fully configure one in a local store? Maybe the blank model number is throwing all the other information out of place that is being sent to the server. Can the server be updated to accept blank model numbers?
    POSSIBLE SOURCE OF PROBLEM - SOLUTION PENDING (02-16-2011)
    I JUST LOOKED ON THE BACK OF MY PRINTER. IT HAS A REMANUFACTURED STICKER ON IT.
    It appears that the missing model number on the remanufacturered units is the reason why it will not connect to the eprint server. Print out the printer diagnostic page and see if the model number is blank.
    HP is working on a fix.
    SOLUTION- (02-22-2011)
    I UPGRADED MY ORDER FROM REFURBISHED TO NEW REPLACEMENT. THE NEW REPLACEMENT CONNECTED THE FIRST TIME TO EMPRINT SERVER - NO PROBLEMS. I HAD TO PAY FOR A NEW ONE AND THEY WILL CREDIT MY CARD WHEN THEY GET THE REFURBISHED ONE BACK.
    LESSON LEARNED - IF YOU HAVE PRINTER WITH BLANK MODEL NUMBER YOU WILL NOT ABLE TO CONNECT TO EPRINT NO MATTER WHAT YOU DO!
    Thanks if anyone can help.
    This question was solved.
    View Solution.

    Try setting a fixed IP/DNS…hopefully you haven’t tried that yet.  (The problem is most likely w/how therouter and the printer are communicating…setting the fixed IP/Manua DNS should fix it. )          If previous steps didn’t help, you may need to set a fixed IP address/DNS Server on your printer.
    Setting a fixed IP address/DNS Server for your printer may resolve web services connectivity issues that can occur on some networks with some routers.  Note:  This may be particularly helpful with networks using DSL/VIOS routers.   
    Please read the entire set of instructions through completely before trying them.  You should not attempt these on your own if you don't understand networking basics.  Most of us have a "techie" buddy/friend/family member...if you're not comfortable this might be a good time to call him/her, or contact HP support.  
    Before you begin, we recommend you first remove Web Services from your printer.  (See the previous section for where to find this on your printer.)   Removing web services will remove your printer from your HPePrintCenter.com account (if you have previously set up an account and added it).  When you re-enable web services after completing these steps you will have a new ePrint email address and need to add your printer to your ePC account again. 
    Setting a manual IP address/DNS Server on your web-connected printer:
    Print a Network Configuration Page from the printer front panel.  On some printers this will be under Wireless>Wireless Settings, and on other models use the “Print Report” option from the Wireless status screen accessed from the wireless icon on the printer home screen.   Note the printer's IP address that is listed in the IPv4 section of the report.  On most printers you can also see the printer’s IP address from the Wireless menu, or on the Wireless status screen.  
    Type that IP address into your browser address bar (where you would normally type a web page URL) and hit enter - this will load the printer's internal settings page (also known as an Embedded Web Server, or EWS)
    Select the “Network” or “Networking” tab (the label varies depending on printer model) from the tabs along the top of the screen in the EWS
    Depending on your printer model, the next step(s) will vary:
    Select the “IPv4” option from along the left side of the Networking screen   
    or
    Select the “Networking” option from the left side of the screen
    Then select the “Network Address (IP)” option from the left side of the screen
    The screen you end up on should be the “IP Address Configuration” screen.  That screen allows you to choose an Automatic or Manual (i.e., fixed) IP address for your printer, as well as Subnet Mask and Default Gateway values.   You will use this screen to set a Manual IP address for your printer.  
    To continue:
    Select the radio button next to “Manual IP”
    Select the “Suggest a Manual IP Address” option below the IP address fields.  The Manual IP address fields will automatically populate with suggested values.
    Select the “Manual DNS Server” radio button in the DNS Address Configuration section
    Enter the address just entered in the “Manual Default Gateway” into the “Manual Preferred DNS Server” field.  Leave the “Manual Alternate DNS Server” entry blank.
    Carefully double-check the values you entered to make sure they are all correct. 
    Click 'Apply'
    Save any open documents and close any web browsers on any computers
    Turn off the printer and unplug the router. 
    Plug in the router, wait for it to start up and for status lights to settle down (approximately a minute at least), then turn on the printer.
    If you removed web services from your printer before starting this process, after the printer has connected to your network, re-enable web services on your device and add your printer to your account on HPePrintCenter. 
    If you did not remove web services before setting a manual IP address and are still having connection issues, remove and re-add web services.  
    In some cases you might need to add the printer to your computer’s Printer/My Printers folder again, after you set the new fixed IP address.   If you have problems printing to your printer, simply use the option to add a printer, select the Networked printer type, and complete the add printer wizard.  You will not need to reinstall any printer software on your computer.  
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • .xlsm File use from Excel 2013 64bit/Win7 64bit to Excel 2013 32bit/Win8.1 64bit - Component Removed (not API related)

    Work Environment:  Excel 2013 64bit/Win7 64bit
    Home Environment: Excel 2013 32bit/Win8.1 64bit (1 desktop and 1 laptop)
    I am developing an an .xlsm file at work (with Lists and a single form with controls linked to a worksheet ControlSource). It works and saves all day long just fine in my work environment. I save the file to either a USB drive (or DropBox - makes no difference)
    and then open the file on my home computer. I can open the file the first time with no problem and with no error messages. But then when I try to save the file Excel 2013 32bit most often tells me that it has removed a component. But it doesn't tell which
    component it has removed. After that, if I close the file and try to reopen it, it won't reopen. I get a series of error message: [1] file path errors (error 75) [2] Excel has stopped working errors. [3] Excel hasn't enough memory to complete the operation,
    [4] Excel will close. So I click the close button on the last error message and Excel disappears. I say disappears, because its not really gone. Mind you, its not listed in the Task Manager at this point. But, if I then click the Windows Taskbar icon to start
    Excel, Excel will sometimes automatically open up with the file that I was trying to open before, already up and running, i.e. I do not select the file to open it - it just appears. Other time Excel just repeats the series of error messages noted above.
    The strange part is, once this file has been corrupted, I can still take it back to my work environment, fire it up on my work computer, and it works just fine. No error messages, no saving problems.
    I have totally uninstalled and reinstalled Office 2013 (HUP Click to Run) on both my home computers and it makes no difference.
    I can say though, this is driving me nuts. Anyone have any suggestions or ideas?
    phillfri

    I think I solved the issue.
    Step 1: Moved all my code from the Worksheet_Open event to the Auto_Open Macro.
    Result: File would open from inside Excel but when opening by clicking on the file in Windows explorer I would get the error msg "There was a problem sending a command to the program."
    Step 2: Apply FixIt 20074. Note that to get this FixIt to work in Windows 8.1 you MUST save the FixIt file to your desktop and run it from there. If you follow the instructions on the FixIt page - download and run - you will get the error msg "This Fixit
    does not apply because the computer does not have the expected software (Excel.exe)."
    Excel 2013 definitely seems to have some bugs when starting a macro enabled file. I have seen other comments on the internet about the Excel workbook_open event actually failing to run all the VBA commands that are put into it.
    Environments:
    [1] Home: Microsoft HUP Click-n-Run Office Professional 2013; Windows 8.1, 64 bit; Excel 2013, 32 bit.
    [2] Work: Enterprise Microsoft Office Professional 2013; Windows 7, 64 bit; Excel 2013, 64 bit.
    phillfri

  • How application know the Principal server down and connect to mirror server ?

    I have setup the database mirroring for disaster recovery solution where we don't need the witness server for fail over.
    But under high-availability mode, If the principal server fails, the mirror server automatically becomes the new principal server and recovers the principal database using a witness server. Now my question is how application server or client application knows
    to connect the mirror server which is now the new principle server.
    Do we need to handle any condition in connection string which is using in client application or any other way ?
    If you think my suggestion is useful, please rate it as helpful.
    If it has helped you to resolve the problem, please Mark it as Answer.
    Varinder Sandhu www.varindersandhu.in

    Check these articles. You basically set the failover partner .
    http://msdn.microsoft.com/en-us/library/5h52hef8(v=vs.110).aspx
    http://blogs.msdn.com/b/spike/archive/2010/12/08/clarification-on-the-failover-partner-in-the-connectionstring-in-database-mirror-setup.aspx
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • Using OSX as our LDAP and connecting Linux Samba Server

    I've been pulling my hair out for a few days now getting my linux box running samba to use my os x server ldap. I just can't seem to find the correct way to set up my smb.conf file that allows it to work. Currently when I try to connect to the samba share it spins for a while and then says, Connection failed. There was an error connecting to the server. Check the server name or IP. Then you hit ok and it says: Could not connect to the server because the name or password is not correct.
    It never does actually ask me for a name or password. So does anybody know for a linux box how we set up the smb.conf file correctly? I've tried to follow the examples online and it just does not seem to work.

    You might want check this thread: https://discussions.apple.com/thread/5470507?tstart=0
    If you have a hard drive with space, you might try partitioning so you could install Mavericks, while preserving your current system, to see whether it works with the apps you have.

  • Can Designer 6i and connect to Oracle Server 9i?

    we have designer6i version 6.5.52.5.0 and Oracle9i server release 2(9.2.0.1.0), and we need to create a repository on oracle9i and connect by designer6i, is it possible at all?

    The first 6i Designer release to be certified against 9.2.0.1 is release 4.3., from the version number you have quoted I believe that you are at release 4.0
    Regards
    Paula Cope
    Designer QA Manager

  • I can't connect to home sharing on my ATV3. It says that it is unable to sign in and connect to my server. Help!

    I have tried getting to my account to watch netflix on my apple tv and it says that it can not connect to the server. I have tried resetting the atv, my router and the remote and it still isnt wrorking. Anytime i try to connect to home sharing it will ask me to try again later. So frustrating!!! Please help

    I was having a similar problem.  My devices weren't waking my iMac. My airport is in bridge mode connected by Ethernet to Verizon router.  My Mac was connected to my airport by Ethernet also.  With this configuration my devices would not see my iTunes libraries.  I ended up disconnecting the Ethernet between airport and Mac. Turned my Mac wifi on, connected to my wi fi network.  Now with my Mac sleeping my devices can see the iTunes library and wake the Mac when needed.
    Not sure if you can use this info but there it is.

Maybe you are looking for