Installing multiple packages with pkgadd...

hi there,
sorry about this silly question but I am having some problem to install multiple packages with pkgadd. Basically I have packages with this form "apache-2.4.3-sol10-sparc-local" and not with pkg extension. So, checking the man page pkgadd -d /packages/dire/ all suppose to work, but it doesn't.
I am sure I am doing a very simple error but couldn't figure out.
It will be appreciated if someone help.
Cheers!

Hi.
pkgadd -d - used for install many packeges from one location.
location may be:
1. Directory
2. Separete file.
You have many files that contetns packages. You can't do it with one commands, or you should previos converst all packages to one file ( man pkgtrans).
You should use command:
pkgadd -d <path>/apache-2.4.3-sol10-sparc-local all
pkgadd -d <path>/gmp-4.2.1-sol10-sparc-local all
pkgadd -d <path>/libtool-2.4.2-sol10-sparc-local all
pkgadd -d <path>/ readline-6.2-sol10-sparc-local all
pkgadd -d <path>/coreutils-8.19-sol10-sparc-local all
pkgadd -d <path>/libgcc-3.4.6-sol10-sparc-local all
pkgadd -d <path>/openldap-2.4.32-sol10-sparc-local all
pkgadd -d <path>/sasl-2.1.25-sol10-sparc-local all
pkgadd -d <path>/db-4.7.25.NC-sol10-sparc-local all
pkgadd -d <path>/libiconv-1.14-sol10-sparc-local all
pkgadd -d <path>/openssl-1.0.1c-sol10-sparc-local all
pkgadd -d <path>/sqlite-3.7.13-sol10-sparc-local all
pkgadd -d <path>/expat-2.0.1-sol10-sparc-local all
pkgadd -d <path>/libintl-3.4.0-sol10-sparc-local all
pkgadd -d <path>/pcre-8.31-sol10-sparc-local all
pkgadd -d <path>/zlib-1.2.7-sol10-sparc-local all
Regards.
Edited by: Nik on 22.10.2012 4:06

Similar Messages

How to install multiple packages with pacman?

Hi ,
I guess it's a pretty noobish question but I wonder how to install multiple packages
that have the same prefix with Pacman.
To make myself more clear, I like to install all gstreamer packages and for that I would
like something similar to
pacman -S gstreamer10*
Is there a command that does something like this available? Found nothing in the man pages.
Maybe some tricky stuff with pipes?

sH wrote:Hi ibendiben,
thanks for your help, but I'm afraid, it does not work
I'm so sorry, my fault, I couln't test it, and made some big mistakes.
This time it's working:
pacman -S $(pacman -Ss gstreamer0.10 | sed -n 's#^$[^/]*/gstreamer0.10[^ ]*$ .*$#\1#p')

How can I install multiple packages in one time?

I use Software Update on this PowerBook to download, keep the packages and install onto my 3 Mac's.
The question is how can I install multiple packages (update stuff) in one time (as we can do with Remote Desktop)? Just to save my time from retarting the machines for every single (required) packages.
Many thanks, and happy new year.

320/2766
Happy New Year Ekapon,
Instead of downloading the packages in advance,
check (Software Update default) every software you need, then choose "Install & Keep Package" from the Install menu.
This will install everything without needing to update prebindings and restart between each installation.
Axl

Installing multiple packages

HI,
I am not too familar with Zenworks. When I create packages I usually allow
them to start-up installing after a non-administrator logs in, and that
works great. I want to be able to install two packages when a user logs in
but set it up so that I can specify which package runs first. Can anyone
set me in the right direction?
Thanks in Advance,
JeffH

JeffH,
> I want to be able to install two packages when a user logs in
> but set it up so that I can specify which package runs first. Can anyone
> set me in the right direction?
>
Icon order governs the order in which they are run if associated as force
run.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

[SOLVED] How to install AUR packages with patchname.patch

Hi all,
I'm trying to install lottanzb from the AUR and there's are a dependency called par2cmdline 0.4-13 that has a lot of nameofpatch.patch that are included in the AUR par2cmdline 0.4-13 package page that just open up to a url that shows code.
I created patch files from the code displayed in the url with a text editor and added them to the extracted LOTTANZB folder in my build directory but when I go to build the package with PKGBUILD it runs through a check sum while building and the checks don't match.
I'm obviously doing something fundamentally wrong here. Can someone direct me?
Thanks,
Last edited by bennylb0 (2010-05-28 13:30:16)

Hi, thanks for reply.
Sorry, my mistake.
I did place patch files inside the par2cmdline-0.4 folder. The only reason I created the .patch files and placed them inside par2cmdline-0.4 folder was because the PKGBUILD as well as the other 5 .patch files didn't exist inside the extracted build folder. They only place I could find them was in AUR par2cmdline-0.4 displayed as a url.
When I copied and created the PKGBUILD as it did not exist inside the extracted folder par2cmdline-0.4 folder I received the following error:-
Error autoconf.patch was not found in the build directory and is not a url. That along with 4 others do not exist in the build directory.
You can see this bellow:-
[ben@ben par2cmdline-0.4]$ makepkg
==> Making package: par2cmdline 0.4-13 i686 (Fri May 28 22:08:21 EST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading par2cmdline-0.4.tar.gz...
--2010-05-28 22:08:23-- http://downloads.sourceforge.net/source … 0.4.tar.gz
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://downloads.sourceforge.net/projec … 0.4.tar.gz [following]
--2010-05-28 22:08:23-- http://downloads.sourceforge.net/projec … 0.4.tar.gz
Reusing existing connection to downloads.sourceforge.net:80.
HTTP request sent, awaiting response... 302 Found
Location: http://transact.dl.sourceforge.net/proj … 0.4.tar.gz [following]
--2010-05-28 22:08:24-- http://transact.dl.sourceforge.net/proj … 0.4.tar.gz
Resolving transact.dl.sourceforge.net... 202.55.147.10
Connecting to transact.dl.sourceforge.net|202.55.147.10|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 239312 (234K) [application/x-gzip]
Saving to: "par2cmdline-0.4.tar.gz.part"
100%[===================================================>] 239,312 179K/s in 1.3s
2010-05-28 22:08:26 (179 KB/s) - "par2cmdline-0.4.tar.gz.part" saved [239312/239312]
==> ERROR: par2cmdline-0.4-autoconf.patch was not found in the build directory and is not a URL.

[SOLVED] Install multiple packages at once?

Arch linux has by far the best documentation I've seen at this point and while I've read through the ABS section and the PACBUILDER section, I've not seen what I'm looking for. Because of this, if its right in front of me, by all means, please point it out.
Here's what I'm looking to accomplish:
I'm running this on a simple notebook and I'm the only user so I don't really have any configurations that need be made on the fly later on, its pretty much just set it up the way I like it and that's that. When I run a clean install, afterwards, I perform most of the steps outlined in the wiki's beginner's installation guide such as:
install sudo, modify sudoers (using wheel group method)
install x
install nouveau and mesa
install synaptic
install dbus
etc, etc, you get the point.
Anyhow, instead of spending 2 hours (yes it takes me that long) typing pacman -S <package> to get everything installed and then spending the time to modify things like daemon array in rc.conf, etc... is there some way I can compile a set of packages to be installed together? for example, if I could package the above mentioned packages inside one package then just execute with pacman -U custompackage1.tar.gz that would be a good time saver especially if I reformat the hard disk and want to get everything back to my "base clean install" with all my base settings, programs, etc etc.
I really hope this makes sense and that I didn't botch up my description of what I want to achieve.
Thanks in advance!
Last edited by shushu (2012-01-24 18:51:19)

The easiest would probably be to keep a list of packages you want to install, update the fresh system first and then pipe your packages into pacman like this
pacman -S $(<list)
You can back up your config files (just tar them with full path) but I wouldn't recommend overwriting them blindly, as depending on the config file things may be slightly different on other hardware or you could miss some change in upstream config (pacnew etc).
Last edited by hokasch (2012-01-24 14:27:43)

Installing a package with "-S" and few versions available

What if I install from some repo "pacman -S app" and there are few versions of "app" and I don't concretize it for pacman? What version will it install? I know that with "-U" I can tell it what version to install. But how does "-S" behave without concretizing?

You can specify the repository you want pacman to use.
pacman -S repo/program
Or you can specify the version:
pacman -S program=version

[Solved]Cannot install any package with pacman

Hi,
today i tried a system update via pacman -Syu and i get these error messages
Konnte Datei 'curl-7.19.6-1-i686.pkg.tar.gz' nicht von ftp.archlinux.org übertragen : File unavailable (e.g., file not found, no access)
so it seems that these files are not on the servers
i have already tried different mirrors even the archlinux.org one
Last edited by kanim (2009-08-18 09:08:19)

It is fixed. You just need to be patient and wait for the mirrors to resync. As many mirrors need to resync all the repo packages, there are not enough bandwidth for all the mirrors. So it will take some time. ftp.archlinux.org is a mirror just like the other ones. The only difference is that we are the ones in charge of it.
For details on what happened, see:
http://archlinux.me/brain0/2009/08/16/s … l-scripts/

Install additional packages with OUI?

I installed 8.1.5 using the "typical" configuration. When it
finished
there was no Context option. How do I get the OUI to
install context as a seperate product without installing
the whole db again?
thanks,
-mark
null

If you don't have access to ULN, your best bet is to check out Oracle's public yum server at http://public-yum.oracle.com. There you will be able to find a mirror of all of the ISO content (no errata/patches) but in yum repo form.

Need to manually install a package with no network [SOLVED]

I have a new laptop and can't get the network to run. According to the wiki, I can run 'hwdetect --show-net' to figure out which module I need. Problem is I can't use pacman to get hwdetect I grabbed it from the /var/cache/pacman/pkg and put it on a usb stick and copied it to the laptop's /var/cache/pacman/pkg but I can't install it... help
EDIT: NEVERMIND, I used the -U switch as if I built it from a PKGBUILD file and it work!
Last edited by graysky (2009-09-12 16:16:11)

Try http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Follow the Very Important Instructions on that page first otherwise the links won't work.

Package with multiple applets

Hi
I want to install 2 applets on real java card. They both are in the same package and cna use each other.
How can i do this on JCOP ?
and what if they are on difference packages and what if i am using some other lib as well ? do i need to install that lib too if yes then how ?
BR
Umer

If your packages and applets are in one JCOP Java Card project, this should be handled for you. You can have multiple applets in a package, you can have multiple instances of a single applet, and you can have multiple packages with multiple applets as well as library packages.
If you want to access an applet from another applet in the same package, it is like referencing any other class instance. If they are in different packages you need to use shareable objects. This is because of the applet firewall.
Cheers
Shane

How to install package with documentation

hi, i installed emacs but the manual is missing in this instalation.
How can I force to install a package with manual and other documentation?
Thanks

i solved it. I used the correponding option in PKGBUILD and compiled again. R.M.

Install package with extra switches

Is it possible to install a package with extra switches that you would normally give with the configure command?

vinyl wrote:Is it possible to install a package with extra switches that you would normally give with the configure command?
this is what srcpac was made for - run "pacman -S srcpac" and then check out the man page (there's alot to explain)
however, as noted, you're going to have to recompile the app, but it's not all that hard with srcpac.... you add the additional line in srcpac.conf and run "srcpac -S some_app"... if there is no line in srcpac.conf, srcpac installs the app through pacman... it's very cool
for the record, if the repos had one package for every switch, they would grow to huge proportions... imagine 20 vim packages, one for each flag... and that's just vim... KDE and gnome would make the repos hit huge proportions...

[SOLVED] Cannot install any package thru pacman

I cannot install any package thru pacman
when i try to install the package with pacman -S,
I started getting error when my sytem crashed and i have to forcefully switch off my laptop through power button
after that when i install anything from pacman i got following error:
[tan@ARCH ~]$ sudo pacman -S shotwell
Password:
warning: shotwell-0.9.3-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): shotwell-0.9.3-1
Total Download Size: 0.00 MB
Total Installed Size: 9.12 MB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [##########] 100%
(1/1) checking for file conflicts [##########] 100%
(1/1) upgrading shotwell [##########] 100%
ldconfig: File /usr/lib/libgexiv2.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libgexiv2.so.0 is empty, not checked.
ldconfig: File /usr/lib/libgexiv2.so is empty, not checked.
ldconfig: File /usr/lib/libraw.so is empty, not checked.
ldconfig: File /usr/lib/libraw.so.2 is empty, not checked.
ldconfig: File /usr/lib/libraw_r.so.2 is empty, not checked.
ldconfig: File /usr/lib/libraw.so.2.0.1 is empty, not checked.
ldconfig: File /usr/lib/libraw_r.so is empty, not checked.
ldconfig: File /usr/lib/libraw_r.so.2.0.1 is empty, not checked.
Thanks in advance
Last edited by tan (2011-05-29 05:45:28)

Thank God, everything is fixed now:
First, I deleted all these files, then i follows the following procedure
1. For libgexiv2 file i upgraded 'xorg-server, xorg-xinit, xorg-utils, xorg-server-utils' from pacman
# pacman -S xorg-server xorg-xinit xorg-utils xorg-server-utils
2. For libraw file i upgraded 'libraw' from pacman
# pacman -S libraw
There will be some conflicting files
After deleting some conflicting files it solves the problem and restore all the 'lib' file.

Blocked Object Installing Support Package

Hello,
I am tryng to install suport packages with SPAM and i´ve an object that is bloking the process.
I´ve checked and the order is already released.
I´ve cheked SPAU and its ok.
I´ve checked se03 and unloked the order but when i go to spam again the order is still blocked.
Can You well Me?
Thank You very much

Either of them
1. There is a transport request which has not released.
2. Do the adjust modification from the SPAM.

Installing multiple packages with pkgadd...

Similar Messages

Maybe you are looking for