Installing of CSR 1000V With Vcloud Director

Hi,
I am testing Vloud cloud director an CSR 100V
I installed CSR 1000V with,Vlcoud director.
All is Ok but ...
Anothing is indicated in documentation of CRS 1000V for installed with Vloud director.
The documentation say for Esxi.
You can see pdf file for my project.
Cordially,

Hi
Are you using Vcloud director 1.5 or 5.1 ? If you are using 5.1 you can choose internal option in the database and its will automatically generates the Database .
The Sql team can reset the Database of Vcloud .

Similar Messages

Problem with vCloud Director- Forgot pass Database

Hi everyone, I have some problem with vCloud director database. I forgot password of my vCloud database. How i can find it in config file? Thanks alots. It very serious. Thanks for help me.

Hi
Are you using Vcloud director 1.5 or 5.1 ? If you are using 5.1 you can choose internal option in the database and its will automatically generates the Database .
The Sql team can reset the Database of Vcloud .

MCAK for vCloud Director 5.1

Hi
We have been using the latest MultiCloud for vCloud Director but are now looking at upgrading to vCenter and vCloud Director 5.1.
I had seen some mention of support coming soon for the version 5.1 of vCD, but have not seen if it is available or in what version it will be.
Would you be able to give some indication on the support for this version please?
Regards,
Paul

You should have no issues using the latest version of MCAK with vCloud Director 5.1. All IAC functionality has been verified. What is not supported yet is the VCD 5.1 API, so you would not be able to take advantage of new API/product features with the PO VCD adapter (although, you could always write your own custom process using HTTP requests to call the new REST API directly).

Build a Cisco CCNA/CCNP/CCIE Virtual Lab with ArchLinux and CSR-1000V

Hi All,
I'm working on the CCIE certification, thought I would share with you my scripts for building a virtual LAB. I'm using ArchLinux and the latest CSR-1000V (ISO) as of June 20th. Cisco should allow you to download this ISO for free. You'll be limited to 100kb/sec out of the box, but you can also get a free 60-day eval license that will unlock 50MB/sec.
These scripts assume you have QEMU installed of course, bridge-tools, etc.
Probably want to enable KSM first
echo 1 >/sys/kernel/mm/ksm/run
This script makes one virtual disk per virtual router. I suppose you could boot one router, let it go through the install, then power it off. Then use that disk as the parent for many others (qemu backing_file). However, the CSR-1000V seems to generate various UUID's for itself during this process and I wasn't sure how this might affect the trial license.
Boot'em up:
# How many vrouters you want
ROUTERS="1 2 3"
# Location of your ISO
ISO="/mnt/nfs/downloads/csr1000v-universalk9.03.15.00.S.155-2.S-std.iso"
# Path virtual hard drive storage
VDISKS="/srv/qemu"
# Build Virtual Disks (might only want to do this once)
for x in $ROUTERS; do
sudo qemu-img create -f raw $VDISKS/r$x.raw 8G
done
for x in $ROUTERS; do
sudo nice qemu-system-x86_64 -name r$x -daemonize -enable-kvm \
-nodefconfig -nodefaults -no-shutdown -rtc base=utc \
-S -cpu host -m 4096 -smp 1,sockets=4,cores=1,threads=1 -balloon virtio \
-drive if=virtio,media=disk,cache=none,format=raw,file=$VDISKS/r$x.raw \
-drive if=ide,index=1,media=cdrom,file=$ISO \
-net nic,vlan=1,macaddr=68:09:68:09:68:5$x,model=virtio \
-net tap,vlan=1,script=no \
-net nic,vlan=2,macaddr=68:09:68:09:69:5$x,model=virtio \
-net tap,vlan=2,script=no \
-serial telnet:127.0.0.1:720$x,server,nowait \
-monitor telnet:127.0.0.1:710$x,server,nowait,nodelay \
-nographic
echo Booting Router $x
done
Note that VM's boot in CPU suspended state. That's because the CSR-1000V ISO installer doesn't correctly auto-detect serial-console mode, so you have to manually select it (but only on first boot, subsequent boots seem to get it right).
So, get xterm's going and in each one, telnet to the virtual serial port: 7201, 7202, 7203, and so on for each router.
Boot them each with this command
echo "cont" | nc 127.0.0.1 7101
echo "cont" | nc 127.0.0.1 7102
and so on
Now just tie together the interfaces however you want. For the connectivity in the picture, use the following:
# Build lab ethernet segments
for x in 1 2 3; do
brctl addbr lab$x
ip link set up dev lab$x
done
# Bring up tap devices - allocated by QEMU but not up'd
for x in 0 1 2 3 4 5; do
ip link set up dev tap$x
done
# Virtually plug in our ethernet cables to correct switch ports
brctl addif lab1 tap0
brctl addif lab1 tap2
brctl addif lab2 tap3
brctl addif lab2 tap5
brctl addif lab3 tap1
brctl addif lab3 tap4
Sample configurations for each router:
Router 1:
en
conf t
hostname r1
no ip domain-lookup
cdp run
int gi1
ip address 192.168.101.1 255.255.255.0
cdp enable
no shut
int gi2
ip address 192.168.103.1 255.255.255.0
cdp enable
no shut
router eigrp 6809
network 192.168.101.0
network 192.168.103.0
redistribute connected
end
Router 2
en
conf t
hostname r2
no ip domain-lookup
cdp run
int gi1
ip address 192.168.101.2 255.255.255.0
cdp enable
no shut
int gi2
ip address 192.168.102.2 255.255.255.0
cdp enable
no shut
router eigrp 6809
network 192.168.101.0
network 192.168.102.0
redistribute connected
end
wr
Router 3
en
conf t
hostname r3
no ip domain-lookpu
cdp run
int gi1
ip address 192.168.103.3 255.255.255.0
cdp enable
no shut
int gi2
ip address 192.168.102.3 255.255.255.0
cdp enable
no shut
router eigrp 6809
network 192.168.102.0
network 192.168.103.0
redistribute connected
end
wr
Last edited by gshearer (2015-06-20 16:47:36)

Very Interesting, but i think it fits better in the wiki then on forum.
Care to create a wiki page ?

Unable to import vAppTemplate to vCloud Director with PowerCLI

I have encountered the following issue with PowerCLI and vCloud Director:
Import-CIVappTemplate cmdlet is not functioning in PowerCLI 5.8 and 6.0 against vCloud Director 5.5.
Error Message on PowerCLI:An attempt was made to move the file pointer before the beginning of the file.
Error Message on vCloud Director UI:Catalog item file transfer failed due to SSL error.
I had confirmed the issue is on each individual cell when I connect direct to the cell before running the cmdlet.
The same ovf and cmdlet is working well in PowerCLI 5.5 and 5.8 against vCloud Director 5.1.
Any suggestion is welcome.

Try trashing the preferences using this free app
http://www.digitalrebellion.com/prefman/

Error in adding host to vCloud Director 5.5.

In our vCloud Director 5.5, we have added vcenter server through which ESXi Host are visible. however while preparing the ESXi host for vCloud Director i.e. installing vcloud agent it stucks in installation and never completes. N/W connectivity is working fine also we did manual uninstallation and reinstalling the vcloud director agent we are getting error message.
Can someone help, where are the logs file getting generated in ESXi Host also how to resolve this issue.

Hi,
Can you please confirm VC and Host Version ? "we did manual uninstallation and reinstalling the vcloud director agent we are getting error message" What is the message saying ? Screenshot would be of great help.
Please ensure that we don't have any running VM's on that host,if VCD fails to place the host in MM,you can manually put the host in MM mode and try preparing.Also keep an eye on below article to check if you are hitting with any such issues.
VMware KB: Setting up a provider in vCloud Director fails with the error: Cannot prepare host
VMware KB: Preparing a host for VMware vCloud Director fails with the error: java.net.UnknownHostException
For log check -- > /opt/vmware/vcloud-director/logs do check for vcloud-container-debug.log,better to 'tail' the log when the host is going through preparation phase
Also do check /var/log/vmkernel.log and hostd logs.

Possible to update my new install of 4.6 with my old 4.5.1 preferences?

Is it possible to update my new install of 4.6 with my old 4.5.1 preferences, layout, and code templates? Or have I overwritten/deleted them through the uninstall new install process?

I case anyone else is having this issue:
http://flashalchemy.com/blog/?p=154
I'd suggest making a back-up of any .prefs you replace.
Also, there are other ways to locate and view hidden files/directories:
http://www.mactricksandtips.com/2008/04/show-hidden-files.html

Problem leaking route from VRF to global table on CSR 1000V

Hi Guys,
So I have a problem with VRF's on a CSR 1000V, specifically exporting a connected subnet from a VRF into the global routing table.
My config, very abbreviated, is as follows:
Router:
GE1: 10.0.0.1/31 VRF TEST
GE2: 172.30.20.1/24 (No VRF, BGP neighbor to 172.30.20.2, receiving 0.0.0.0/0 (default route))
Now sh ip route displays:
0.0.0.0/0 (BGP)
172.30.20.1/24 (Connected)
sh ip route vrf TEST displays:
0.0.0.0/0 (BGP)
10.0.0.1/31 connected
My VRF config is as follows:
ip vrf TEST
rd 1:1
import ipv4 unicast map GLOBAL
export ipv4 unicast map CONNECTED-SUBNET
ip prefix-list CONNECTED seq 1 permit 10.0.0.1/31
ip prefix-list DEFAULT seq 1 permit 0.0.0.0/0
route-map CONNECTED-SUBNET permit 10
match ip address prefix-list CONNECTED
route-map GLOBAL permit 10
match ip address prefix-list DEFAULT
Now my import command works perfectly (0.0.0.0/0 is imported from BGP into the VRF's routing table), however my export command does not function - seemingly at all.
Even though my prefix list is an exact match, I do not see 10.0.0.1/31 appearing in the global routing table, or the BGP table at all (show ip bgp 10.0.0.1 shows only the 0.0.0.0/0 default route)
Any thoughts on what is going on here? Am I misunderstanding the export command for VRF's? I was under the impression this will export directly to the BGP table, and then be imported to the global routing table if applicable?
Any thoughts/input would be appreciated!

Hello
"GE1: 10.0.0.1/31 VRF TEST
GE2: 172.30.20.1/24 (No VRF, BGP neighbor to 172.30.20.2, receiving 0.0.0.0/0 (default route))"
I must have misunderstood somewhere I was assuming you had no vrf bgp between GE1-2 , and just vrf on subnet 10.0.0.0/x which needed to be advertised in the global routing table hence my last post suggested you redistribute into bgp,
So assuming you are accepting a default route from GE2 it went like this
GE1
int fa0/1
ip vrf forwading TEST
ip addresses 10.0.0.1 255.255.255.255
int xx
ip address 172.30.20.1 255.255.255.0
router bgp xy
neighbour 172.30.20.2 remote-as yx
redistribute static ( to advertised the vrf subnet to GE2)
ip route 10.0.0.1 255.255.255.255 fa0/1 ( this is tell the global rib where to go for the vrf route)
ip prefix-list VRF permit 0.0.0.0/0
route-map VRF_rm
match ip address prefix VRF ( match on the default route advertised from GE2 which is in the global rib)
ip vrf TEST
import-map ipv4 vrf VRF-rm ( import the default from global rib into the vrf rib)
res
Paul

How to use vCloud Director Catalog into vFabric Data Director

Hi,
How to use vCloud Director Catalog into vFabric Data Director.....

When you install Data Director, you have the option of selecting a Global or Organizational installation. When you select Organizational, you have an additional option to specify the vCD instance from which you can get Organizations and Users. This must be set up at installation time.

Does CSR 1000v support HA feature & how?

Does CSR 1000v support HA feature?
I noticed that redundancy command support in configuration mode,but neither sso/ha mode can config,
Router(config-red)#?
Redundancy configuration commands:
default Set a command to its defaults
exit Exit from redundancy configuration mode
main-cpu Enter main-cpu mode
mode redundancy mode for this chassis
no Negate a command or set its defaults
timer Select a timer to configure
Router(config-red)#mode ?
none no redundancy
Router#show platform
Chassis type: CSR1000V
Slot Type State Insert time (ago)
R0 CSR1000V ok, active 00:18:57
F0 CSR1000V ok, active 00:18:57
Is it possible to enable HA feature in csr1000v?
I noticed that in startup, R1 was insert，but not online，which was in disabled state.

Alan,
HA provided across a network segment within AWS is not a simple solution due to the restrictions that they place on the L2 segments. As an example, here is Amazon's suggestion for NAT HA:
http://aws.amazon.com/articles/2781451301784570
With that said, we're working on documenting a solution that will work around some of the restrictions through overlaid connections. At a high level, one way that you can do this is with a couple of CSR1000Vs connected via a GRE tunnel over their Amazon segment. You then would have to setup BFD and configure an EEM script to watch for a peer down event. This script would then have to modify the AWS VPC Routing table (the VPC gateway) so that the hosts use the appropriate CSR as an exit point. The unfortunate piece is that from the CSR1000V we cannot call the AWS API directly so this requires use of a second EEM script to SSH to a helper VM and execute the AWS VPC commands. Hopefully within the next couple of weeks we will have a configuration guide to step through the individual components, as there are many moving parts. At a high level this solution was presented in the Cisco Live session BRKARC-2023 around slides 35-40 (Session PDF) are some of the network diagrams and an example of the EEM script.
With that said, another solution that you might consider is Cisco InterCloud:
http://www.cisco.com/c/en/us/td/docs/solutions/Hybrid_Cloud/InterCloud/InterCloud/Cirrus_2.html
This allows for a secure Layer 2 extension from your data center into the public cloud which could remove some complexity in dealing with the AWS infrastructure. This solution is not one that would be for the one off, single CSR type deployment, however if you are looking at scale it could be a good alternative.
As for TAC support with the Advanced License, this is the hourly paid model that we have within Amazon. Support for this type of licensing is currently only offered through the support forum, however we are looking at other options that could allow direct TAC engagement on a case by case basis rather than a term license. Depending on where you are at with regards to your deployment it may be appropriate to engage your Cisco Account Team to help determine which solution is best for you. I can help track them down if you want to send me a private message.
-Nick

VCloud Director 5.5.3 - console disconnected on Chrome

Hello all,
I have an issue with vCD 5.5.3 and Chrome console . It popus up and immediately goes to disconnected . From the same PC , Firefox and IE console both work . There is no vmware-vmrc folder created , so I don't know how to get the logs of what might be wrong.
Both http and console certificate were imported into Trusted root certificate authority , opened in Chrome https://vcd-console , it is trusted .
Any ideeas on what might be , or how to get the logs ?
Thank you.

Well, some additional info :
I've tried VMware KB: Cannot connect to vCloud Director HTML5 console with Mac OS X using Mozilla Firefox or Google Chrome ( which also applies on Windows ) -> https://developer.chrome.com/devtools/docs/console
In javascript console, I've noticed that Chrome actually tries to open the console using the IP instead of the FQDN . I've tried to open https://ip-of-console , and of course I get a warning regarding the certificate , as it was created for FQDN , and it tries on IP .
Your connection is not private
Attackers might be trying to steal your information from xxx.xxx.xxx.xxx (for example, passwords, messages, or credit cards).
So in the end is related to Certificate , have to see if there is a DNS issue or what . If you have any ideas, feel free to share.
Thank you.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Adobe creative cloud set up to install on a mac with parallels windows 8

Unfortunately it is not possible to install the program it always displays an error message. how can you loess the problem?
error message: This application can not be run from a network drive-. copy it to a local folder and strarten it again.

I have just the regular version, not Professional.
I mean "les integrated", in the sense that you really run Fusion "in a window". The more "integrated" approach means that Windows applications run as if they were for the Mac, and you do not see the Windows interface at all. I personnaly think tjat is too confusing. There is nothing wrong with it, just a bit more confusing. i like having it clear that Windows is in a seperate Window.
Op 21 nov. 2013 om 12:57 heeft Krishnam <[email protected]> het volgende geschreven:
Re: adobe creative cloud set up to install on a mac with parallels windows 8
created by Krishnam in Adobe Creative Cloud - View the full discussion
Hi MacLesNL,
Which version of VM Ware should I go for?
http://www.vmware.com/uk/products/fusion/
http://www.vmware.com/uk/products/fusion-professional/
So that I could install Adobe CC on Windows 7? Please advise.
What do you mean ny "less integrated"? Is this must to run Adobe CC in VMWare on Mac?
Please advise.
Thanks, Krishnam
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5861525#5861525
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5861525#5861525
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5861525#5861525. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have Creative Suite 6 Design & Web Premium installed on my HP Windows 7 laptop. All of a sudden Acrobat Pro will not open and I cannot reinstall. Get errors 2203, & Error-Install MSI payload failed with error 1603. Help.

I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!

Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra

Installing of CSR 1000V With Vcloud Director

Similar Messages

Maybe you are looking for