Installing oracle 10gr2 and applying 10.2.0.3 patchset on sun sparc 64bit

dear all,
im planning to install oracle 10gr2 on sun solaris sparc(64bit).
kindly provide the steps specific to configuring kernal parameters.
details:
On Solaris 10
sparc 64-bit
uname -r
5.10
provide the steps to configure the kernal parameters with respect to my configuration.

hi rajesh,
thanks for your quick reply. but in sun solaris 10 do we need to change the entries in /etc/system.
as per
Oracle® Database
Installation Guide
10g Release 2 (10.2) for Solaris Operating System (SPARC
64-Bit)
B15690-02
November 2005
Note: In Solaris 10, you are not required to make changes to the
/etc/system file to implement the System V TPC. Solaris 10 uses
the resource control facility for its implementation.
do we need to chanage the values as specified or how to proceed.?
im confused in these with respect solaris 10.

Similar Messages

Got an error while installing oracle 10gR2 on RHEL 4

Hi Everybody,
After running ./runInstaller while installing oracle 10gR2 on RHEL4 ,i got an error message showing below can anyone guide me how can i proceed furthur?
As Follows:-
[oracle@localhost database]$ ./runInstaller Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-29_09-37-34PM. Please wait ...[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-29_09-37-54PM. Please wait ...[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)

Hi,
You got these errors because runInstaller can not start the GUI. There are 2 solutions, you can choose one:
1. logout Gnome/Kde, login as oracle user, and run runInstaller again.
2.open a new root terminal,
a) run "xhost +" as root.
b) run "su - oracle" switch to oracle
c) run "export DISPLAY=:0.0"
d) then run "./runInstaller" again.
cheers.
Ice

Install Oracle 10gR2 on Windows x64

Is this possible to install Oracle 10gR2 on Windows 2008 x64 ?
I though that there aren't any difference between 2003 and 2008, but during reading this presentation:
http://www28.cplan.com/cbo_export/PS_S291788_291788_176-1_FIN_v2.pdf (login: cboracle pass: oraclec6) I saw that installation on Windows 2008 is "PLANNED"?! Can someone explain more?

tutus wrote:
So what thas mean planned?You'd have to ask Christian Shay (apparent author of the document) but given that the document is nearly two years old and 10g is now entering 'sustaining' support without having been certified on Win 2008, I'd guess it means their "plans" changed.

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

How to install oracle 11g and 10g on same linux server.

how can i install oracle 10g and 11g on same linux server ????
10g database is already installed , i want to installed 11g on the same machine. How can i do this???

Hi;
how can i install oracle 10g and 11g on same linux server ????
10g database is already installed , i want to installed 11g on the same machine. How can i do this???You may go wiht different mount point like to create /oracle11g and /oracle10g and you can choose related path for your installation.
Please read:
Managing multiple oracle home
http://docs.oracle.com/cd/B12037_01/em.101/b12140/3_oui_oracle_homes.htm#i1005615
http://docs.oracle.com/cd/B12037_01/em.101/b12140/3_oui_oracle_homes.htm
Regard
Helios

How to Install oracle 10g and 11g on aix 6.1

Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how
Chetan
Edited by: chetan0926 on Jan 11, 2012 2:56 AM

Hi;
Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how Yes you can,both version is certified
I agree Sybrand, Please check installation guide. All your questions will be answered in it
http://www.oracle.com/pls/db102/homepage
http://www.oracle.com/pls/db112/homepage
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Differences between oracle 10gr2 and 11gr2 warehouse bulider

Hi All,
Could you please let me know the main differences between Oracle 10gr2 and Oracle 11gR2 warehouse builder.
Also , it would be great if anyone point me to the document where i can see the major differences.
Thanks,
Naveen.

Hi Naveen,
The major difference between OWB10gR2 and 11gR2 is the target RDBMS.
In 10gR2 you have to use ORACLE as your target RDBMS (unless you are going for DB Gateways, that is a complete different story).
Where as in 11gR2 allows you to use any RDBMS as your target system . This is achieved by Code-Template mapping.
All is needed is that proper jdbc driver for the target system.
Also 11gR2 supports OBIEE RPD creation and etc.
http://blogs.oracle.com/warehousebuilder/2009/09/oracle_warehouse_builder_11gr2.html
http://www.rittmanmead.com/2009/09/a-look-at-the-new-features-in-owb11gr2/
http://www.oracle.com/technetwork/developer-tools/warehouse/owb-11gr2-new-features-summary-129693.pdf
Thanks,
Sutirtha

Installing oracle 10g and 11g client on the same Linux RHEL 5.4 host

Is it possible to install Oracle 10g and 11g client on the same Linux RHEL 5.4 host and have the application switch between 10g and 11g? and how would the 10g and 11g be installed?

Thanks for your reply.
Typeically if 10g is installed in /home/roacle/product/10.2.0, are you saying that for 11g, it would be /home/oracle/product/11.0.0 ?
How about switching the application? Does changing the ORACLE_HOME and PATH environment variable setting enough ? Let's say from
ORACLE_HOME=/home/oracle/product/10.2.0/client_1 to /home/oracle/product/11.0.0/client_1

I want to install Oracle 8i and forms 6i on xp

I want to install Oracle 8i and forms 6i on xp. Kindly give me a complete step by step file, so that i can know before installation......
Thanks

Get into a time machine and go back about 20 years. ;-)
You are asking about something hopefully no one has done for a decade ... installing desupported software on a desupported database on a desupported operating system on, perhaps, some antique server.
Perhaps someone else kept their notes from back in the Jurassic period but mine were in a recycle bin many many years ago.
If you really wish to do this I suspect you are going to be stuck doing it the way we did back then ... read the docs accompanying the installation files.

Is it possible to install Oracle 9i and SQL server on same machine

1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,

Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek

Installing ORACLE 10gr2 on windows 7 untimate 64bit processer

Hi All,
I was installing oracle 10gr2 on windows 7, untimate 64bit processor but giving me some abnormal termination of
installation
"unknown error"
Please help me on this..
Rajini.V

Hi,
Thanks for the reply.
I have downloaded from the following link
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
i tried these two S/w's
Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64, Microsoft Windows Server 2008 R2 x64, Windows 7 x64
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista, Windows Server 2008, Windows 7
But they are not getting installed, Can you please suggest me a link where i can download 10.2.0.5.
Thnanks,
Rajini.V

Installing Oracle 10g and error with DISPLAY value

Hello, I am instaling Oracle 10g and when I run:
. /runInstaller
this error apear:
Can't connect to X11 window server using :0.0 as the value of DISPLAY variable.
how must I set de DISPLAY variable if I have instaling in a local system?
Thanks

Can't connect to X11 window server using :0.0 as the value of DISPLAY variable.you apparently set the display correctly (:0:0) if you are installing locally.
You could do a xhost + as user531326 if you did not start your X session as oracle
Message was edited by:
Laurent Schneider
note that xhost + is not a good security practice, have a look at
http://amath.colorado.edu/computing/unix/x/

Help me install oracle form and report 9.0.4 on red hat AS 4 x86

i installed oracle database 10.0.2 on my red hat AS 4 x86 in /u01/app/oracle/product/10.0.2/db_1. Now i want to install oracle form and report 9.0.4 on my computer in /u02/app/oracle/product/9.0.4
The oracle installer checks for required packages. It will produce the following list of missing packeges:
Package gcc-3.2.3-20 is missing
Package compat-gcc-7.3-2.96.122 is missing
Package compat-gcc-c++-7.3-2.96.122 is missing
Package compat-libstdc++-7.3-2.96.122 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package setarch-1.3-1 is missing
Package sysstat-4.0.7 is missing
Package gnome-libs-1.4.1.2.90-34.1 is missing
Package libstdc++-3.2.3 is missing
Package compat-libstdc++-devel-7.3-2.96.122 is missing
Package compat-glibc-7.x-2.2.4.32.5 is missingbut i installed newer versions of them. so can i continue to install without missing packeges??? and how to install missing packages because they conflict with packages i installed.
i tried to continue installation without missing packages and have some errors:
"Error in invoking target 'agent' of makefile /u02/app/oracle/product/9.0.4/sysman/lib/ins_sysman.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/sqlplus/lib/ins_sqlplus.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/plsql/lib/ins_plsql.mk"
Error in invoking target 'relink' of makefile /u02/app/oracle/product/9.0.4/precomp/lib/ins_precomp.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/webcache/lib/ins_calypso.mk"
Error in invoking target 'install' of makefile /u02/app/oracle/product/9.0.4/network/lib/ins_net_client.mk"
Error in invoking target 'webm-install'(or genm-install or gen-install) of makefile /u02/app/oracle/product/9.0.4/forms90/lib/ins_forms.mk"
Error in invoking target 'proxy install' (runm-install,server-install,cgi-install,cli-install,conv-install,qv-install) of makefile /u02/app/oracle/product/9.0.4/reports/lib/ins_reports.mk"
and error in Configuration Assistants:
"output generated from coniguration assistant "oracle net configuration assistant":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/jre: relocation error
":/u01/app/oracle/jre/1.1.8/bin/.../bin/i686/native-threads/libjava.so: symbol_ _libc_wait, version Glibc -2.0 not defined in file libc.so.6 with link time refrence
Someone help me!!!
Thanks.

The requirements for installing 10.2.0 and 9.0.4 on RHEL4 differ - 9.0.4 is based on older versioned RSFs and require linking against older compatibility libraries.
The OUI may incorrectly complain if later versions of the required/pre-requisite packages really are installed - this should not be a problem functionally, however.
The latter errors you report, however (make, relocation error, glibc/symbol), are symptomatic of trying to link with/against incompatible gcc/glibc versions. Try installing the following additional compatibility files (appropriate for your architecture);
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-oracle-rhel4-1.0-5.i386.rpm
- http://oss.oracle.com/projects/compat-oracle/dist/files/RedHat/compat-libcwait-2.1-1.i386.rpm
If you have not already done so, I suggest you create and use (i.e. source) separate environment definition files when working with each product/version environment. For 9.0.4, ensure that you specify environment variable LD_ASSUME_KERNEL=2.4.19 before installing 9.0.4 (or relinking).
If you have MetaLink access, refer also to Note.315832.1, Note.389811.1.
Message was edited by:
mychan

Installing Oracle Clusterware and TimesTen

I am attempting to setup TimesTen with Oracle Clusterware and this website "Installing Oracle Clusterware and TimesTen" says that I should "Install Oracle Clusterware 11.2.0.2" however, when I go and look for I found this page: "Oracle Grid Infrastructure Downloads" however as you can see from that page it does not have version 11.2.0.2.
Does anyone know where I can get Clusterware 11.2.0.2?
Would version 12.1.0.1.0 work for me?
Thanks,
Victor

Thanks for the info on 12.1.0.1.0 :-(
If you look at eDelivery 11.2.0.2 is not available. I guess I will have to go with setting TimesTen setup without the Grid Infrastructure (i.e. use these instructions instead - "Active Standby Pair with TimesTen In-Memory Database")
https://lh4.googleusercontent.com/Kg-lODsuooX9cl5-z2W2tuQ0KDQjLCuytwjf_jma1OfZf5IUiKiwQTvUtkRQvBSASQ=w1808-h804

Hw to install oracle forms and reports 11g builder on windows machine

HI Guys
i need to install oracle forms and reports 11G builder on windows machine for devlopers.. do anybody know from where i can download them and install them on developers machine. if anybody know steps of them .. that will be great..
Regards,
Devender

Maybe this thread will help you: Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32

Installing oracle 10gr2 and applying 10.2.0.3 patchset on sun sparc 64bit

Similar Messages

Maybe you are looking for