Installing Snow Leopard on older iMac

I just got a new iMac but wanted to still use my old iMac. I wanted to upgrade to Snow Leopard. Can I just install using the Mac OS install DVD that came with my new iMac? Here's my old iMac's specs:
2.16 GHz
Intel Core 2 Duo
2GB 667MHz
DDR2 SDRAM
Thanks.

No. Gray disks are machine specific and only contains the necessary hardware drivers for the Mac it came with. It won't work on your older iMac, besides being illegal to install the software on more than one Mac.

Similar Messages

  • Hi I am trying to install snow leopard, Hi I am trying to install snow leopard onto my iMac g5 currently, Hi I am trying to install snow leopard onto my iMac g5 currently running 10.3.9. I open disk ,click install- nothing happens. Any ideas? Thanks Dan

    Hi I am trying to install snow leopard onto my iMac g5 currently running 10.3.9. I open disk ,click install- nothing happens. Any ideas? Thanks Dan

    Snow Leopard requires an Intel-based Mac, so as Niel indicated your iMac G5 cannot run it. The last version of Mac OS X your iMac G5 can run is Mac OS X 10.5.8.
    Regards.

  • Since installing Snow Leopard on my iMac, my incoming mail on Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Since installing Snow Leopard on my iMac, Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Sylvia,
    There is a Office for Mac Product Forums, if now one here is able to answer I'd recommend posting on that forum.

  • Trying to install snow leopard on an iMac.

    My iMac is running 10.5.8 and I am trying to install Snow Leopard, but the machine keeps spitting the disk out without any prompt boxes.  The software was ordered from Apple and is fresh out of the package.  The machine accepts other disks just fine.  Am I missing something?

    Check the disc for smudges or scratches. Also check on a different machine. Bad discs are a rarity, but do happen. Last resort, call Apple and get a replacement.

  • Installing snow leopard on a imac that won't turn on

    When I tried to turn on my imac this morning, the fans turn on, but the screen goes grey with the logo on it then turns straight back off again. I tried clearing the P-Ram to no avail. Then I tried to reinstall the disks but the computer says that the disk can't be installed because the harddrive can be configured. I've now got a snow leopard disk that I am trying to install instead but as the computer won't stay on it won't lwt me and when I try to turn on the computer holding the c key to start the computer from the disk it just stays on the grey screen with no sound from the fan. Has anyone any idea what I can do?

    When I tried to turn on my imac this morning, the fans turn on, but the screen goes grey with the logo on it then turns straight back off again. I tried clearing the P-Ram to no avail. Then I tried to reinstall the disks but the computer says that the disk can't be installed because the harddrive can be configured. I've now got a snow leopard disk that I am trying to install instead but as the computer won't stay on it won't lwt me and when I try to turn on the computer holding the c key to start the computer from the disk it just stays on the grey screen with no sound from the fan. Has anyone any idea what I can do?

  • Installing Snow Leopard on Alu iMac with broken disk drive

    The disk drive in my 24" alu iMac is crap and has never worked properly and now wont accept most disks and I've had Snow Leopard for ages but not been able to install it.
    Would this work - I have an old Powerbook G4 1.5ghz with 1.25gb RAM and a fully working superdrive. Could I put the snow leopard disk in that and share the disk to my iMac connecting them with a firewire cable and install this way? (They both have 400 & 800)
    How would I do this?

    Actually, pretty much any iMac later than the second generation iMac G5 ALS (the "Ambient Light Sensor" model) are quite challenging to take apart & put back together without damaging something. Taking apart any of them after the ALS involves removing delicate items held in place by adhesives, removing hard to reach connectors, & so on. Not impossible but definitely not something the average user should try.
    For that reason, I suggest an even more obvious option: instead of paying to have the internal replaced, just buy an external optical drive instead. For instance, Other World Computing offers a lot of them. Although I don't know if it sells outside the U.S. it should give the OP some idea of what's available.

  • I want to install Snow Leopard on my imac...

    and I have the imac backed up from Time Machine. If I boot up from the OS disc and wipe the current drive clean, can I easily transfer my info from the Time Machine backup to the imac with the new OS?
    thanks,
    C

    If I boot up from the OS disc and wipe the current drive clean, can I easily transfer my info from the Time Machine backup to the imac with the new OS?
    You will be given the option to do so while setting up the new OS.
    (56119)

  • Can't install Snow Leopard to iMac

    When I try installing snow leopard on my iMac I get the message, can't install this disc currently used for time machine backups (the disc is the iMac's internal hard drive). I tried installing with the computer already on and by booting directly from the install disc and get the same message.

    applefangirl, SL won't install on any disk that contains a "backupd" subdirectory. It thinks your TM backups are on this disk. If your backups are elsewhere, which they probably are, than delete this subdirectory on disk and SL will install.
    Verify that you have backups elsewhere first!!!
    See: http://support.apple.com/kb/TS2986
    Cheers

  • Installing Snow Leopard on a Vintage iMac that meets all the technical requirements

    I am trying to install Snow Leopard on "Vintage" iMac that is currently running 10.5.8.  I have the Snow Leopard DVD but when I put it in I get an error message that says "Mac OS X Snow Leopard cannot be installed on this computer".  I have already confirmed with Apple Tech Support that my system meets the requirements and should be able to run Snow Leopard.  Any suggestions? Is there another way to install the Operating System.  Tech Support said they couldn't help any further because it is a Vintage.  But they suggested posting a question to the apple community. 
    Any help would be greatly appreciated.  Thanks in advance!

    Try this first:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Now boot from your Snow Leopard installer and try the installation.

  • Strange problem installing Snow Leopard

    Hey!
    I've tried too install Snow Leopard and i go through all the usual steps, it installs and then restarts just like its supposed to but then when i get to the desktop nothing has changed. I've clicked on 'About This Mac' and it still says 10.5.8. Why is this? I've got about 15GB of free space so i dont think thats the problem.

    I had installed Snow Leopard on my iMac 24" 2.4GHZ Intel machine. Previously everything had been working fine prior to my install. Coincidence being what it is, after I installed SL from DVD my menu bar items in the top right were not showing up and then my CD/DVD drive was not working. Would say that it can't read the inserted disc and my options were to choose ignore and eject.
    I chose Ignore and went to Disk Utility and it could see the blank DVD I had inserted. But I could not burn the disc.
    *Due to me having two issues at the same time, this complicates my ability to pinpoint what the solution was, but here's what I did and now everything is fine*
    Before everything granular, I tried installing from SL disc again, in case that had been an issue...when that didn't work then...
    First I removed a series of suggested .plist files that pertain to the menu bar, finder, clock, etc... That was for my menu bar issue (which didn't fix it by the way)
    I then used disk utility from the SL DVD using that as start up disc, yes it loads fine. Verified and Repaired Disc permissions and drive. No issues.
    I ran software update and installed 10.6.1 (still no fix to either problem)
    I ran firmware update using the hold power button process during startup
    (still no fix to either problem)
    I reset the PRAM using boot up key sequence...still appeared to be no fix.
    Then one more complete shut down and reboot...VOILA! *EVERYTHING REPAIRED*!!!
    So I have no idea WHAT did it, or WHY. However, that process now has me burning DVDs successfully and I have all my menu items back.
    I know it's not the most helpful response, but I can tell you everything works fine now.

  • Snow Leopard on new iMac possible?

    Is it possible to install Snow Leopard on an iMac to be purchased this week.
    I know the official word is no but Leopard runs on my iMac late 2009 which came with SL although one has to double boot.
    I envision a partition with Lion and one with Snow Leopard.
    TIA
    Lewis

    I think so.  If you use Disk Utility to create a new partition on the iMac in Lion then you should be able to restart the iMac, boot from the Snow Leopard installation disk and install Snow Leopard onto the new partition.  Certainly a new iMac should be perfectly capable of running any version of OS X from 10.4 onwards.

  • I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    Snow Leopard cannot run on a PPC G5 Mac as it requires an Intel processor. Please confirm what Mac you have.

  • I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so.   Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music

    I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S.     Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music and pics?  And keep them synced up as I purchase more? 

    Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

  • Can I install snow leopard on an external hard drive so I can run quicken 2006, and put snow leopard on my imac harddrive

    Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?

    You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
    To create a second partition on your existing startup volume:
    To resize the drive do the following:
    1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
    2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.)

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

Maybe you are looking for