Installing SQL server AlwaysOn in hybrid solution
Hi,
I am trying to build a HA solution with SQL 2014 and AlwaysOn. My setup is 3 servers on prem and 1 server in Windows Azure with site-to-site VPN in between. My idea is to use the Azure replica as an async copy of some databases that resides on prem.
There is currently some guidence on the web how to setup this listener configuration using powershell and probe configuration. This works fine and the database on prem replicates to the secondary copy in Azure and the listener can do
a failover to the Azure replica. All great so far.
My question is now: How can I have a second Availability Group=Secondary listener configured between the same Machines?
Or is it a limitation to this setup, that you can only configure ONE listener to a SQL server within a cloud service in Azure?
I guess the limitation will be the same if both machines are located in Azure?
//Håkan
Yes. Only one availability group listener is supported per cloud service because the listener is configured to use the cloud service IP address.
Check this link:http://msdn.microsoft.com/en-us/library/azure/dn425027.aspx
Similar Messages
-
Error While Installing SQL SERVER 2012 on Windows Serrver 2012 R2
I encounter the following errors while installing SQL SERVER on Windows SERVER 2012 R2, can anybody help me out?
dotdazzleIf you are using any system account then password is not needed. From the screenshot I see NT Authority\.... so you don't need password.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Overlapped I/O error 997 installing SQL Server 2014 Express on Windows Server 2012 R2
I'm attempting to install SQL Server 2014 Express on a Windows Server 2012 R2 system. When I do the install, it fails (several times) with an "Error: 997. Overlapped I/O operation is in progress.". From searching the web, I can see many people
have had this problem with this installer and other non-SQL server installers.
I've tried every solution I can find discussed, but none help with my problems The system is fully updated, with the exception of the KB2538243 (VC 2008 SP1 redist), which is probably failing for the same reason.
I've tried removing several updates mentioned in other articles (KB2918614). I've confirmed that I'm not using a temporary profile.
Does anyone have an idea of how I can solve this issue?
Thanks,
Zack
Partial detail from install log file:
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Partial detail from component log file:
MSI (s) (D8:3C) [15:18:29:173]: Resolving source.
MSI (s) (D8:3C) [15:18:29:173]: Resolving source to launched-from source.
MSI (s) (D8:3C) [15:18:29:173]: Setting launched-from source as last-used.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{1D8E6291-B0D5-35EC-8441-6616F567A0F7}'.
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR ==> C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR product ==> {1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: A general error running CryptAcquireContext
MSI (s) (D8:3C) [15:18:29:188]: Determining source type
MSI (s) (D8:3C) [15:18:29:188]: Source type from package 'VC_RED.MSI': 2
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: SourceHash database file already exists. Deleting it.
MSI (s) (D8:3C) [15:18:29:204]: Note: 1: 2262 2: SourceHash 3: -2147287038
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: New Hash Database creation complete.
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:997
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: Failed to CreateContentHash of the file: install.res.1040.dll: for computing its hash. Error: 997
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Failed to create hash for the install source files
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: SecureRepair Failed. Error code: 3e561F257D8
Action start 15:18:29: ProcessComponents.
MSI (s) (D8:3C) [15:19:28:843]:
Error 997.Overlapped I/O operation is in progress.Alberto,
Thanks for your help. Unfortunately, I've already tried that. I did try it again and I get an "This update is not applicable to your computer."
I tried to post the Windows Update log, but it was too large. I've posted some of it below.
Here is the WU log:
2015-02-06 11:24:25:793
5048 50
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:793
5048 50
Misc = Process: C:\Windows\system32\wusa.exe
2015-02-06 11:24:25:793
5048 50
Misc = Module: C:\Windows\System32\wuapi.dll
2015-02-06 11:24:25:793
5048 50
COMAPI ----------- COMAPI: IUpdateServiceManager::AddScanPackageService -----------
2015-02-06 11:24:25:793
5048 50
COMAPI - ServiceName = Windows Update Standalone Installer
2015-02-06 11:24:25:793
5048 50
COMAPI - ScanFileLocation = C:\c5f288db3c43a7e4613232ca1a3c\wsusscan.cab
2015-02-06 11:24:25:808
920 111c
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:808
920 111c
Misc = Process: C:\Windows\system32\svchost.exe
2015-02-06 11:24:25:808
920 111c
Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-06 11:24:25:808
920 111c
Service *************
2015-02-06 11:24:25:808
920 111c
Service ** START ** Service: Service startup
2015-02-06 11:24:25:808
920 111c
Service *********
2015-02-06 11:24:25:824
920 111c
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2015-02-06 11:24:25:824
920 111c
Agent * WU client version 7.9.9600.17489
2015-02-06 11:24:25:824
920 111c
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-02-06 11:24:25:824
920 111c
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-06 11:24:25:824
920 111c
Agent * Access type: No proxy
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:824
920 111c
Agent * Network state: Connected
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:855
920 b64
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-02-06 11:24:25:855
920 111c
Agent *********** Agent: Initializing global settings cache ***********
2015-02-06 11:24:25:887
920 111c
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2015-02-06 11:24:25:887
920 111c
Agent * WSUS server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * WSUS status server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * Target group: (Unassigned Computers)
2015-02-06 11:24:25:887
920 111c
Agent * Windows Update access disabled: No
2015-02-06 11:24:25:902
920 b64
WuTask WuTaskManager delay initialize completed successfully..
2015-02-06 11:24:25:902
920 b64
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-02-06 11:24:25:902
920 b64
Report CWERReporter::Init succeeded
2015-02-06 11:24:25:902
920 b64
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-06 11:24:25:902
920 b64
DnldMgr Download manager restoring 0 downloads
2015-02-06 11:24:25:902
920 111c
AU ########### AU: Initializing Automatic Updates ###########
2015-02-06 11:24:25:902
920 111c
AU AIR Mode is disabled
2015-02-06 11:24:25:902
920 111c
AU # Approval type: Scheduled (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Auto-install minor updates: Yes (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-06 11:24:25:902
920 111c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU AU finished delayed initialization
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 b64
Misc Validating signature for C:\Windows\SoftwareDistribution\ScanFile\a487aa0f-3e53-4fee-a784-6171b00254e4\Source.cab with dwProvFlags 0x00000080:
2015-02-06 11:24:25:933
920 111c
AU Adding timer:
2015-02-06 11:24:25:933
920 111c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:949
920 af0
DnldMgr Asking handlers to reconcile their sandboxes
2015-02-06 11:24:25:949
920 b64
Misc Microsoft signed: Yes
2015-02-06 11:24:26:154
920 b64
DtaStor Default service for AU is {7971F918-A847-4430-9279-4A52D1EFE18D}
2015-02-06 11:24:26:154
920 b64
IdleTmr Incremented idle timer priority operation counter to 1
2015-02-06 11:24:26:154
5048 50
COMAPI - Added scan package service, ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Init Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:169
920 b64
IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 17; does use network; is not at background priority
2015-02-06 11:24:26:169
920 b64
IdleTmr Incremented idle timer priority operation counter to 2
2015-02-06 11:24:26:341
920 b64
Report *********** Report: Initializing static reporting data ***********
2015-02-06 11:24:26:341
920 b64
Report * OS Version = 6.3.9600.0.0.131344
2015-02-06 11:24:26:341
920 b64
Report * OS Product Type = 0x00000021
2015-02-06 11:24:26:357
920 b64
Report * Computer Brand = PowerSpec
2015-02-06 11:24:26:357
920 b64
Report * Computer Model = S Series
2015-02-06 11:24:26:357
920 b64
Report * Platform Role = 1
2015-02-06 11:24:26:357
920 b64
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2015-02-06 11:24:26:357
920 b64
Report * Bios Revision = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Name = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Release Date = 2013-08-20T00:00:00
2015-02-06 11:24:26:357
920 b64
Report * Bios Sku Number = S Series
2015-02-06 11:24:26:357
920 b64
Report * Bios Vendor = American Megatrends Inc.
2015-02-06 11:24:26:357
920 b64
Report * Bios Family = Server
2015-02-06 11:24:26:357
920 b64
Report * Bios Major Release = 4
2015-02-06 11:24:26:357
920 b64
Report * Bios Minor Release = 6
2015-02-06 11:24:26:357
920 b64
Report * Locale ID = 1033
2015-02-06 11:24:26:357
920 b64
Handler Calculating current update level for this session
[ Omitted data ]
http://support.microsoft.com/?kbid=3000850, timestamp 01d039c57a22c0be
2015-02-06 11:24:28:388
920 b64
Handler Done calculating current update level for this session
2015-02-06 11:24:28:982
920 b64
Agent *** START *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
5048 50
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:28:982
920 11f4
Agent *** END *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *************
2015-02-06 11:24:28:982
920 11f4
Agent ** START ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *********
2015-02-06 11:24:28:982
920 11f4
Agent * Online = Yes; Ignore download priority = No
2015-02-06 11:24:28:982
920 11f4
Agent * Criteria = "DeploymentAction='Installation'"
2015-02-06 11:24:28:982
920 11f4
Agent * ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:28:982
920 11f4
Agent * Search Scope = {Machine}
2015-02-06 11:24:28:982
920 11f4
Agent * Caller SID for Applicability: S-1-5-21-3157695610-3447843402-2534478823-500
2015-02-06 11:24:28:982
920 11f4
Agent * RegisterService is set
2015-02-06 11:24:29:185
920 11f4
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-02-06 11:24:29:185
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:29:185
920 11f4
PT WARNING: Cached cookie has expired or new PID is available
2015-02-06 11:24:29:185
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:185
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:185
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:294
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:294
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:294
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:357
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:357
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:357
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:638
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:638
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:638
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:013
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:013
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:013
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:044
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:044
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
PT + SyncUpdates round trips: 5
2015-02-06 11:24:30:076
920 11f4
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-02-06 11:24:30:076
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:30:138
920 11f4
Agent * Found 0 updates and 54 categories in search; evaluated appl. rules of 126 out of 284 deployed entities
2015-02-06 11:24:30:138
920 11f4
Agent *********
2015-02-06 11:24:30:138
920 11f4
Agent ** END ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:30:138
920 11f4
Agent *************
2015-02-06 11:24:30:138
920 11f4
IdleTmr WU operation (CSearchCall::Init ID 1, operation # 17) stopped; does use network; is not at background priority
2015-02-06 11:24:30:138
920 11f4
IdleTmr Decremented idle timer priority operation counter to 1
2015-02-06 11:24:30:154
5048 1428
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI - Updates found = 0
2015-02-06 11:24:30:154
5048 1428
COMAPI ---------
2015-02-06 11:24:30:154
5048 1428
COMAPI -- END -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI ------------- -
Can I run a soft without install sql server?
I just wrote a winform C# program and use SQL server 2012 for data.
Can I run this program on other machine without install sql server ?
If I can't. Are there other program simpler than sql server help me run it ?
THANK ALL !Agree with Nicolas. You need to modify connection string to point to proper server name. This might help in getting proper name of instance.
http://sqlserver-help.com/2011/06/19/help-whats-my-sql-server-name/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4
Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh -
I get one or the other error when i install SQL server 2012 SP1 in my Lab server
I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htmSorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected] -
Error while installing SQL Server 2012 Express Edition
Dear Experts,
My system configuration is,
Windows 7 Ultimate
32 bit
RAM 8 GB
I7 Processor
I am trying to installed Sql serve 2012 with tools version but not able to install.
Its giving me error Like Value can not be null..
I search every thing on google but not helps me.
Please assist.
Thanks,Hello,
Try .NET Framework repair tool.
https://support.microsoft.com/kb/2698555?wa=wsignin1.0
Another possible solution can be found on the following URL.
http://sqlserver-help.com/2012/07/23/help-getting-error-value-cannot-be-null-while-opening-management-studio-which-value/
Please share with us the Summary.txt log file. Th following article may help you locate the file on disk.
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Make sure you have enabled .NET Framework 3.5 using Control Panel -> Programs and Features.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error when installing SQL Server 2014 Express
I am running a Win 8.1 desktop 64bit (fully updated) with already installed SQL Server 2012 and Visual Studio 2010 and 2013 (non Express versions). I need to keep SQL Server 2012 for development purposes but also need SQL Server 2014 for a database
provided to me by others which needs this version. I found out it should be possible to run the two versions side-by-side. During installation of SQL Server 2014 Express I selected all features except 'Local Db' and used a named instanc
e. The setup runs through without any notice of problems but at the end fails with error code 1638 the reason being 'Error installing Microsoft Visual Studio 2010 Redistributables'. Also at the end a window pops up mention 'The working of SQL Server
2014 stopped - Trying to find a solution'. Doing nothing on my part the window disappears and nothing else happens. So I uninstalled any 'Redistributable' and ran setup again. Same result though both 'Microsoft Visual C++ 2008 Redistributable
- x86 9.0.30729.4974' and 'Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219' re-appear in Control Panel as being
p
roperly installed! All features are marked as 'failed' with one and the same error 1638. Even tried just upgrading to see if that would work but also here same error.
I have not been able to find the proper solution so I am now stuck. Hopefully someone can give me the right steps to take? Ruud van der SpoelHello,
Error 1638 means another version of the product is already installed. Probably you have a 32-bit version installed but
the installation requires a 64-bit version of VC.
Try to manually install both 32-bit and 64-bit versions of each VC.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error Calculating InstanceID when installing SQL Server 2012 SP1 on Windows 7 Home Premium SP1
Hello...
I know this issue has been on several tickets but I have not been able to find a satisfactory solution. I am receiving error 0x85640001 "...error calculating instanceid" when I attempt to install SQL Server 2012 Developer Edition DVD.
I have downloaded the ISO for the enterprise evaluation product and tried burning it to a DVD-RW and decompressing the ISO to my desktop for installation without success.
The log files do state the setup process runs into a badimageformat exception.
I had SQL Server 2008 Developer edition installed on this laptop, but I have completely removed all prior SQL Server instances (using the uninstall wizard in Control Panel).
Please let me know what you suggest to correct this problem.
Thank you for your help!Hello,
1. Uninstall any SQL Server 2012 component using Control Panel.
2. Download the Evalaution Edition from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=29066
3.Perform an edition upgrade from evaluation edition to developer edition using the current media.
http://technet.microsoft.com/en-us/library/cc707783(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error found while installing sql server
whenever I tried to install sql server 2008 Enterprise full version, it gives immediately errror "Native Sql install bootstrapper has stpped working".... Please give me a solution for this error...
whenever I tried to install sql server 2008 Enterprise full version, it gives immediately errror "Native Sql install bootstrapper has stpped working".... Please give me a solution for this error...
Hello,
I searched net for this type of error,I have not faced this type of error before ,all threads recommend to open case with MS see below discussion
this link
And this link
You can also wait for others to respond
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Cannot install SQL Server 2008 R2 on Widows 7 Pro
I've tried unsuccesfully to install SQL Server 2008 R2 on my laptop running Windows 7 Pro.
I previously installed Visual Studio 2010 and downloaded the SQL Server 2008 R2 disk image, burned the disk and then tried to install SQL Server.
I get a "Microsoft .NET Framework" unhandled exception dialog box with the following detail message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. (C:\Users\Louis\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config line 5) ---> System.IO.FileNotFoundException:
Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
File name: 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
at System.Configuration.TypeUtil.GetTypeWithReflectionPermission(IInternalConfigHost host, String typeString, Boolean throwOnError)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory..ctor(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory(FactoryRecord factoryRecord)
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
--- End of inner exception stack trace ---
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
at System.Configuration.ConfigurationManager.GetSection(String sectionName)
at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
at System.Configuration.SettingsBase.get_Item(String propertyName)
at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
at Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings.get_WindowPlacement()
at Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
CodeBase:
file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
LandingPage
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/x86/LandingPage.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
Microsoft.SqlServer.Configuration.Sco
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///E:/x86/Microsoft.SqlServer.Configuration.Sco.DLL
Microsoft.SqlServer.Chainer.Infrastructure
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///E:/x86/Microsoft.SqlServer.Chainer.Infrastructure.DLL
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
Microsoft.SqlServer.Management.Controls
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///E:/x86/Microsoft.SqlServer.Management.Controls.DLL
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
//// End of message.
I have all the updates on my laptop per Microsoft Update.
Any ideas what is wrong?Hello,
Please try the solution posted in the following thread:
http://social.msdn.microsoft.com/Forums/en/sqlkjsetupandupgrade/thread/35356bf2-6db7-4785-a104-bc62d18913f7
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Cannot install SQL Server 2008 R2 Developer on Windows 8.1
I am unable to install SQL Server 2008 R2 Developer edition on Windows 8.1 Enterprise evaluation and about 3/4 of the way through the installation I get this error msg:
TITLE: SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0&EvtType=0x88792597%25400xBB814387
This is my log file:
Overall summary:
Final result: User cancelled
Exit code (Decimal): 0
Exit message: User cancelled
Start time: 2014-04-23 23:49:10
End time: 2014-04-24 00:03:44
Requested action: Install
Machine Properties:
Machine name: PC
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: F:\My Files\My Downloads\EXISTING\SQLServer2008R2Dev\SQLFULL_ENU\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: PC\computername
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PC\computername
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\SystemConfigurationCheck_Report.htm
I tried installing as adminstrator and in compatability mode with Windows 7/Vista but that didn't work. Trying to install from the dvd or from the extracted files in my drive made no difference.
I am now wondering if there is a download link for SQL Server 2008 R2 Developer edition with SP2 included (i.e. not just SP2 but the whole application (5GB+) otherwise I am not sure how to install this.Hello,
1. Please refer to solution provided in below thread
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/61d56f64-2575-4a58-9503-84579476afaf/sql-server-2008-setup-error-attempted-to-perform-an-unauthorized-operation?forum=sqlsetupandupgrade
2. Make sure you stop antivirus services during running the setup.Make sure you Right click on setup.exe file and select run as administrator.
If above does not works include below as well
3. Please verify WMI service is started.
If WMI is started, consider to repair WMI.
http://windowsxp.mvps.org/repairwmi.htm
Reference
Link
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
An error occurred attempting to install SQL Server 2008 Express Service Pack 1
i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S ManneHi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li -
Can't figure out how to install sql server for PHP
I am trying to install SQL Server for PHP on a server with Server 2008 32 bit. The exe from http://www.microsoft.com/en-us/download/details.aspx?id=20098 keeps tell me that it is an invalid win32 application. I've tried running as administrator
as well. Somewhere I read you need to open the exe with 7zip. I was able to do that and see all the files in there, but where do I go from there?
Thanks
Mike
edit: forgot to mention I'm using Apache for my serverThat solution is obsolete. The current solution is here:
http://msdn.microsoft.com/en-us/sqlserver/ff657782.aspx
bill ross -
SQL Server AlwaysOn Failover threshold and Lease Timeout
Hi experts,
I found each time when I were building/restoring another log shipping(standby) server. It would cause ERR [RES] SQL Server Availability Group: [hadrag] Failure detected, diagnostics heartbeat is lost(in cluster log) and A connection timeout has occurred on a previously established connection to availability replica 'DL980-4' with id(in errorlog). I google and find a document (http://download.microsoft.com/download/0/F/B/0FBFAA46-2BFD-478F-8E56-7BF3C672DF9D/Troubleshooting%20SQL%20Server%20AlwaysOn.pdf ) indicated that “This may be a performance issue”. I run restore database and AlwaysOn synchronizing on the same 10GbE link at the same time.
Should I increase
leaseTimeout from 20000 to 100000 and
HealthCheckTimeout from 30000 to 300000?
Does it work to prevent unnecessary failover.
Please refer to
(http://blogs.msdn.com/b/psssql/archive/2012/09/07/how-it-works-sql-server-alwayson-lease-timeout.aspx )
parag
10-18-2013 3:19 AM
Hi Denzil
we seem to see lease expires very frequently when the server is under very high cpu pressure .. our failure condition level is 1
is it possible to prevent this situation . the problem is when lease expires,all the current connections seem to be dropped . wondering if there is a way to prevent this ..
Also is it possible to affitinize the always on health check process to a particular core
Thanks for your help!Hi Dennis
Should I increase
leaseTimeout from 20000 to 100000 and
HealthCheckTimeout from 30000 to 300000?
Does it work to prevent unnecessary failover.
1. you can increase the timeout parameter, but when the fail-over time slight delay will be there (its a work around solution)
2. You may require to check the Network connections. (Cluster Heartbeat & public network)
3. Have you update the latest patches of OS & DB?
4. If possible raise the ticket to Microsoft. they may give some update for Cluster resource update based on your issue
Regards
Sriram
Maybe you are looking for
-
10.6.6 update and syncing issues in iTunes with iPhone 4 and Apple TV
After installing the recent OSX 10.6.6 update, I am receiving the following error messages in iTunes 10.1.1 when trying to sync both my iPhone 4 (iOS v4.2.1) and my 1st generation Apple TV (OS v3.0.2): iPhone error message: "The iPhone cannot be sync
-
Everything else works fine, my library, syncing with my iPod, etc. I'm running Windows Vista, and the problem showed up when I started traveling in Europe (is there some rule I'm mising...??) I don't get an error message or a time-out warning, the l
-
Hi All, One Asset was mapped to WBS in Asset master at the time of creation (Origin tab in asset master). Now I want to de-link this mapping, or simply put remove/delete this WBS from asset master as client does not wish to settle the project to this
-
I have a quick question, I would like to back up one of our servers (to an external HD, for safety reasons) remotely using time machine. Is that possible? If so how would that be done and if its not possible with timemachine is there any other softwa
-
Ask the Expert: Service Delivery Manager for Cloud Web Security with Alex Chan
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the recommended practices for Cisco Cloud Web Security (CWS). Cisco Cloud Web Security (CWS) provides industry-leading securi