Installing the jdeveloper sample error

When I 'RefreshSchema' I get the error message ...
[sql] Apr 17, 2008 12:18:09 PM oracle.jdbc.driver.OracleDriver registerMBeans
[sql] SEVERE: Found Oracle Apps MBeanServer but the getMBeanServer method threw an exception.
I am not clear on the settings for ...
jdbc.driver=oracle.jdbc.OracleDriver
jdbc.urlBase=jdbc:oracle:thin:@localhost
jdbc.port=1521
jdbc.sid=XE
I have oracle10g installed in c:/Oracle10G and it works with some schema that I have.
The changes I have made to the build properties are ...
jdeveloper.home=c:/JDeveloper
temp.dir=C:/temp
jdbc.sid=XE
override.email=[email protected]
smtp.server=comcast.net

Hi,
assume you talk about SRDemo. When you installed SRDemo it asked you for a database access to install the database schema. This also configures the database access in teh ANT script. The demo installs itself with no other steps of action required
Frank

Similar Messages

Error during installing the OEHR sample data application on Apex

Hi,
I have installed Oracle XE 10g edition and on the top I have installed Oracle Apex 3.2 on my laptop. I am able to login with SYSTEM as workspace and username and with password given during installation. I have created a user with developer and user privileges and tried to import the OEHR application in to the work space SYSTEM for the USER I have created. When I try to install the OEHR sample data I encounter with an error
***" ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-01003: no statement parsed <pre>begin wwv_flow.g_import_in_progress := true; end; </pre>"***
Can any1 please suggest me, how to work around the issue and use the APEX installed on my laptop.

Hi,
my first try to install the OEHR sample data on Apex was also not successfull.
After checking the User Guide and the Forum I increased the space quota of the waorkspace to 20MB and changed the language in the browser to en-us (see http://kr.forums.oracle.com/forums/thread.jspa?threadID=642849).
The second try was then succesfull.
Peter

Do me a favour and install the OEHR sample app on a 10.2.0.3 database

Hello,
Can someone out there install the OEHR sample application on to the following combination software:
Oracle 10.2.0.3
APEX 3.0.1.00.08
I'm running on on AIX 5.2, but that shouldn't be an issue here.
I just want someone to come back and say yes it all worked perfectly. It all installed and runs just as it says in the instructions. I've tried this install a dozen times now even building a completely new database and installing everything again from scratch and it still doesn't work.
It all says it installs cleanly, but when I press the run application button after the install nothing happens and it asks me to install the supporting objects even though I've already done it and if I try to do it again it fails because everything is already there.
In 10 years of being a DBA this is one of the most annoying issues I've ever come across ...
Thanks,
John.

Hi John,
I did so - just the other day on apex.oracle.com (which is 10.2.0.3). I tried it again this morning on an 11g database running APEX 3.0 and didn't have an issue. There's some rational explanation for this.
1) When you go through the Install Supporting Objects wizard, are there any warnings about prerequisites at all?
2) After the installation of supporting objects seems to succeed, do you end up with a page showing three icons and a message of "Your application's supporting objects have been installed"?
3) What do you see when you click on the Install Summary? Does it show a total of 3,258 statements being executed? Any errors? If you browse the schema, does it appear that everything is installed?
Joel

HT4623 While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

I am getting this message also.... mine cant update too...

My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

My phone will not let me restore it, I tried several times and when I install the frimware gets error and nothing is installed. What can I do?

Can't install the CC installer - error 201.

I'm trying to download a trial of Indesign and failing on this first step!
Any suggestions?
running on Win7 Ultimate x64
-Ian.

Hi Ian,
I've been having the same problem and have scoured the internet for the last 4 hours. Tried to Customer Service Chat but had to wait too long, all the forum answers by staff say things like "refer to here about your internet connection" which did not help me at all and in my opinion, quite lousy customer service. Finally, I found a solution.
Try the direct download links here:
Adobe CC 2014 Direct Download Links – Creative Cloud 2014 Release | ProDesignTools
You bypass the need for the CC installer. It makes things maybe a little less simple in the future and you need a few extra steps, but it works.
Follow the instructions carefully. I disabled all my firewall programs. You'll need to install the 7-zip extractor. Download the links, extract the files using the 7-zip program, and run the .exe file that you've extracted.
I'm also running Win7 x64, had to download Illustrator, Photoshop, and InDesign tonight for my job tomorrow. CC installer never worked no matter what I did.
Let me know if it works for you! Fingers crossed.
Victoria

Newbie apex error when trying to install the OEHR Sample object.

ORA-01653: unable to extend table FLOWS_030000.WWV_FLOW_ONLINE_HELP by 8 in tablespace APEX
I got this error when trying to install.
I will go back now and check the storage space.
I could not find any error message on it.
Thanks.Steve

Just few minutes after asking this question on forum, I was able to find the workaround for opening the DashboardDesigner.exe.
What I was trying earlier was that, In my "Business Intelligence Center" site, i was trying to open the Dashboard Designer from "PerformancePoint Content" list by clicking "New Item" from "Items" tab in Ribbon.
Instead Now I go to the connections library "Data Connections", Go to "Documents" tab in Ribbon and then click on "New Document".
Voila!
Finally "DashboardDesinger.exe" opens up! :D
Now from this designer application, I can add other Lists directly and can add "PerformancePoint Content" list for creating actual ScoreCards, Dashboards, KPIs etc.
Happy Learning!
Shri07

"Invalid Java Home ...." .Installing the JDeveloper Studio Edition ---Mac

I have try every Path OR"JDK Path",and jdev told me: "Invalid Java Home ......" .
I cannot understand this: Ref: http://download.oracle.com/docs/cd/E12839_01/install.1111/e13666/toc.htm
6.2 Specifying the JDK location on Mac OS X Systems
Note: This section is not applicable to the Studio edition.
When you start JDeveloper for the first time, the jdev script prompts you to provide the location of your JDK installation if it cannot locate it. You will need to enter the path to java.exe.
Edited by: user4527807 on 2008/11/28 下午 11:11

A quick search on this forum for Mac would have shown you that there are some extra steps mentioned in the release notes for Mac:
http://www.oracle.com/technology/products/jdev/htdocs/11/knownissues.html#install4

I dont install the wallet sample to java card with gpshell . help please .?

Hi
I use Gemalto pc twin Reader.
I try jdks(1.3.5 , 1.5 , 1.6 versions) for compile
I use java card kit (2.1.1 , 2..1.2 , 2.2.1 ,2.2.2 versions) for create cap files
For loadin used gpshell (1.4.2 , 1.4.1 , 1.3.1 versions)
script
enable_trace
establish_context
card_connect
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
install_for_load -pkgAID a00000006203010C06 -nvCodeLimit 500 -sdAID A000000003000000
load -file wallet.cap
install_for_install -priv 02 -AID a00000006203010C0601 -pkgAID a00000006203010C06 -instAID a00000006203010C0601 -nvDataLimit 500
get_status -element 20
card_disconnect
release_context
I didnt load wallet applet to card. Some time I take install_for_load error , some time install_for_install_and_make_selectable()
Please help me.
With jdk 1.3_5 , java card dev kit 2.1.2 and gpshell , I load applet to card but dont install and I take install_for_install_and_make_selectable returns 0x80206A80 (6A80 : Wrong data / incorrect values in command data) error.
I dont understand why dont loaded the applet to card. Actually I load and install HelloWorld.cap file as this way.
Additionally , In the wallet applet , the register method used as resigter(bArray , ..... .

Anybody help me please. It very important. :(

Help about the error of installing the ides ehp5, error code:1073740791

hi All Basis Expert,
I have downloaded the ECC6.0EHP5, ides version. When I try to install it on windows server 2003 X64, I always got the error at phase 17, and the return code is 1073740791. the message like that:
Execution of the command "C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect" finished with return code -1073740791. Output:
The SAPinst.log file as follows:
SAPinst.log
INFO 2099-08-30 07:33:38.314
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection".
INFO 2099-08-30 07:33:38.314
Working directory changed to C:/Program Files/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/CENTRAL.
INFO 2099-08-30 07:33:38.408
Switched to user: cdp-ehp5\ec2adm.
INFO 2099-08-30 07:33:38.533
Creating file C:\Program Files\sapinst_instdir\ERPEhP5\AS-ABAP\ORA\CENTRAL\R3load.exe.log.
INFO 2099-08-30 07:33:38.548
Switched to user: cdp-ehp5\ec2adm.
INFO 2099-08-30 07:33:38.580
Output of C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect is written to the logfile R3load.exe.log.
WARNING 2099-08-30 07:33:41.830
Execution of the command "C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect" finished with return code -1073740791. Output:
ERROR 2099-08-30 07:33:41.845
CJS-30023 Process call 'C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code -1073740791. For details see log file(s) R3load.exe.log.
ERROR 2099-08-30 07:33:41.892
FCO-00011 The step testDatabaseConnection with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR ( Last error reported by the step :Process call 'C:\usr\sap\EC2\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code -1073740791. For details see log file(s) R3load.exe.log.).
INFO 2099-08-30 07:33:42.517
Creating file C:\Program Files\sapinst_instdir\ERPEhP5\AS-ABAP\ORA\CENTRAL\__instana_tmp.xml.
Any ides? Any help? Many thanks.
Ross Wang

Hi Vincent,
I don't know if the following information is enough?
disp+work information
kernel release                720
kernel make variant           720_REL
DBMS client library           OCI_10201_SHARE,
DBSL shared library version   720.00
compiled on                   NT 5.2 3790 S x86 MS VC++ 14.00 for NTAMD64
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  May 7 2010 02:47:09
update level                  0
patch number                  46
source id                     0.046
supported environment
database (SAP, table SVERS)   700
                              710
                              701
                              702
                              703
                              711
                              712
                              720
                              730
                              731
DBMS server
   ORACLE 10.1.0..
   ORACLE 10.2.0..
   ORACLE 11.2...*
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
disp+work patch information
( 0.001) Inconsistencies for <tt:call transformation> II (note 1240930)
( 0.001) SELECT with FOR ALL ENTRIES and dynamic WHERE condition II (note 110391
6)
( 0.001) Presentation buffer improvements (note 1332488)
( 0.001) Currency fields with manipulated input mask (note 1325894)
( 0.001) XBNF: Adjusted some identifier rules (note 1332293)
( 0.001) Suppressing input history for the SAP GUI (note 1264378)
( 0.001) VMC: Checking for null in JARM data condensing (note 1334807)
( 0.001) GUI status version (note 1081770)
( 0.001) VMC/JAC (note 1332616)
( 0.001) VMC/JAC (note 1332616)
Ross

Document 'Installing the PDK-Java Framework and samples v2' not found Urgent!!

Hello,
I want to install the PDK_url samples, but I have had no luck at the moment.
I have a PDK already installed, working fine.
I have downloaded the PDK (V2) available at this moment in the PortalStudio page, but I have the next problems:
* my portal version is 3.0.9.8.0 (a bit lower than the recommended)
* the url for the installation document is not working correctly, so I don4t have this document.
I have downloaded the pdk_url samples and extracted the files, and tried to follow the 'Installing the PDK-URL Services Samples'
but as the versions (v1-v2) are different, I can4t follow the steps.
Where could I find this document, or a PDK-url version for my portal version.
Thanks

PDK-Java v2 and the URL-based samples require OC4J, available for download on OTN. When you say that you have installed the PDK samples, do you have them running on Apache (under your 3.0.9 portal), or on OC4J?
I could open the v2 installation documents without any issues:
Installing the PDK-Java Framework and Samples and Installing the PDK-URL Services Sample (V2).
Hope this helps.
Peter

Problem while starting the Jdeveloper studio

Hi,
I have installed the Jdeveloper 11.1.2.0.0.
But when I am starting the Jdeveloper Studio I am getting the error as "Unable to create an instance of the Java Virtual machine located at C:\Program Files\Java\jdk1.6.0_20\jre\bin\client\jvm.dll".
I have install the JDK 6.0 Update 20 at C:\Program Files\Java Folder before installing the Jdeveoper.
And I had mention C:\Program Files\Java\jdk1.6.0_20 path while installing Jdeveoper JDK location.
To test whether JDK has been install properly or not I have also tested a sample java program and it worked.So I think there is no problem for JDK.
But While starting the Jdeveloper Studio I am getting the above mentioned error.
Can Someone is aware of this error? Or face this error at any stage?
Please let me know the solution if knows
Thanks,
Shweta

Hi,
Changing the virtual memory option did not worked for me.
I have found the following solution and it worked for me.
In order to fix this type of error, go to installation_directoy\Middleware\JDeveloper\jdev\bin folder
and edit file jdev.conf.
Locate line "AddVMOption -XX:MaxPermSize=256M".
Now add another line just below this line:
AddVMOption -Xmx256M
I found this solution at : javainnovations.blogspot.com/.../jdeveloper11g-startup-error.html
It work for me.
Thanks,
Shweta

Textpad can't Run programs after installing oracle9i Jdeveloper

'NoClassFound' this type run error is displaying the textpad editor, after installing the jDeveloper. Before installing the JDeveloper it was running properly from textpad through jdk 5,
Now it is showing the above error.
Though from the jdeveloper run engine the same program is running properly.
where it is conflicting? i know jdeveloper got its own java exe and compiler, is it making any prob wid da jdk 5 exe and compiler?
plz let me know?
u kan mail me: [email protected]

Let me understand: you have a Mac Pro (this forum) or G5? totally different.
Why not backup the home directory and then erase and install? that works.
Your hardware profile etc says "10.3.9" and while it is possible to do an update in place from panther to tiger, it really works best to reformat and install (after backup up everything obviously).

How to deploy the J2EE samples?? common.xml cannot be found

Hi folks,
I recently downloaded the J2EE packages and installed them successfully I think (Servlets and JSPs are presented correctly)...now I want to test the samples, that one can download from sun, because I want to find out more about ejbs and jms...
...I followed the instructions of the /docs-diractory in the samples, but I always encounter a problem, that the file common.xml cannot be found...
Here is exactly what I do:
-set the PATH environment variable to the /bin-
directory of the J2EE server
-go to the /src-directory of the sample
- run asant
==>then comes the error, that the file common.xml
cannot be found, which is not astonishing
because there is not such a file in the
sample' s directory.....and I do not what this file
is good for....and what structure it has...
What is my mistake?? Do I have to copy the sample-directories to a certain directory of the server???
Thanks for any help...Bye

The file common.xml is found in the directory Sun\AppServer\samples after you've installed the sun sample application server.
One thing that surely works is if you copy all samples into this directory and use asant to build them from there.
Jan

HSDIO conditionally fetch hardware compare sample errors (script trigger to flag whether or not to wait for software trigger)

I am moderately new to Labview and definitely new to the HSDIO platform, so my apologies if this is either impossible or silly!
I am working on a system that consists of multiple PXI-6548 modules that are synchronized using T-CLK and I am using hardware compare. The issue I have is that I need to be able to capture ALL the failing sample error locations from the hardware compare fetch VI... By ALL I mean potentially many, many more fails than the 4094 sample error depth present on the modules.
My strategy has been to break up a large waveform into several subsets that are no larger than 4094 samples (to guarantee that I can't overflow the error FIFO) and then fetch the errors for each block. After the fetch is complete I send a software reference trigger that is subsequently exported to a scriptTrigger that tells the hardware it is OK to proceed (I do this because my fetch routine is in a while loop and Labview says that the "repeated capbility has not yet been defined" if I try to use a software script trigger in a loop).
This works fine, but it is also conceivable that I could have 0 errors in 4094 samples. In such a case what I would like to do is to skip the fetching of the hardware compare errors (since there aren't any) and immediately begin the generation of the next block of the waveform. That is, skip the time where I have to wait for a software trigger.
I tried to do this by exporting the sample error event to a PFI and looping that PFI back in to generate a script trigger. What I thought would happen was that the script trigger would get asserted (and stay asserted) if there was ever a sample error in a block, then I could clear the script trigger in my script. However, in debug I ended up exporting this script trigger back out again and saw that it was only lasting for a few hundred nanoseconds (in a case where there was only 1 injected sample error)... The sample error event shows up as a 1-sample wide pulse.
So, my question is this: is there a way to set a flag to indicate that at least one sample error occurred in a given block that will persist until I clear it in my script? What I want to do is below...
generate wfmA subset (0, 4094)
if scriptTrigger1
clear scriptTrigger1
wait until scriptTrigger0
end
clear scriptTrigger0
generate wfmA subset (4094, 4094)
I want scriptTrigger1 to be asserted only if there was a sample error in any block of 4094 and it needs to stay asserted until it is cleared in the script. scriptTrigger0 is the software trigger that will be sent only if a fetch is performed. Again, the goal being that if there were no sample errors in a block, the waiting for scriptTrigger0 will not occur.
I am probably going about it all wrong (obviously since it doesn't work), so any help would be much appreciated!

Please disregard most of my previous post... after some more debug work today I have been able to achieve the desired effect at slower frequencies. I did straighten out my script too:
generate wfmA
if scriptTrigger1
clear scriptTrigger0
wait until scriptTrigger0
end if
generate wfmA
scriptTrigger1 = sample error event flag
scriptTrigger0 = software trigger (finished fetching error backlog in SW)
However, I am still having a related issue.
I am exporting the Sample Error Event to a PFI line, looping that back in on another PFI line, and having the incoming version of the Sample Error Event generate a script trigger. My stimulus has a single injected sample error for debug. For additional debug I am exporting the script trigger to yet another PFI; I have the sample error event PFI and the script trigger PFI hooked up to a scope.
If I run the sample clock rate less than ~133MHz everything works... I can see the sample error event pulse high for one clock period and the script trigger stays around until it is consumed by my script's if statement.
Once I go faster than that I am seeing that the script trigger catches the sample error event occasionally. The faster I go, the less often it is caught. If I widen out the error to be 2 samples wide then it will work every time even at 200MHz.
I have tried PFI0-3 and the PXI lines as the output terminal for the sample error event and they all have the same result (this implies the load from the scope isn't the cause).
I don't know what else to try? I can't over sample my waveform because I need to run a true 200MHz. I don't see anything that would give me any other control over the sample error event in terms of its pulsewidth or how to export it directly to a script trigger instead of how I'm doing it.
Any other ideas?

Installing the jdeveloper sample error

Similar Messages

Maybe you are looking for