Instalo itunes 10.4 de 64 bit pero cuando quiero abrirlo haciendo click en el icono, sale lo siguiente Apple Application Support was not found. Is required to run itunes. please unistall itunes, then install itunes again. Error1(windows error2).
Instalè Itunes 10.4 de 64 bits en mi ordenador, pero cuando quiero abrirlo me sale un mensaje en inglès que dice: Apple application Support was not found.
is required to run Itunes. Please unistall Itunes, then install iTunes again.
Error1(windows error2).
Ya he instalado y desintalado varias veces y siempre aparece lo mismo.
tengo exactamente el mismo problema!!! al momento de bajar la actualización con el apple software update me arroja un error y me recomienda hacer la instalación manual, una vez que actualizo de manera manual me aparece un error de "ensamblaje"
AYUDA! no puedo upgrade my iPod!
Similar Messages
-
TS5376 i get apple application support was not found its required to run itunes
apple application support is required to run itunes
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I have downloaded itunes to my computer which is windows 7 and I get an error 2 which says Apple Application Support was not found does anyone know how to overcome this error?
Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
So when I plugged in my iPhone 4 (iOS 7.0.4), iTunes told me it needed to update to the newest version... so I did. After installing it it gave me an error (-45019) that said that a required component wasn't installed. I looked it up and people were saying to unistall iTunes and all apple related software and reinstall itunes which i did. I am on Windows 8.1.
Now it gives me this error. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please unistall iTunes and install iTunes again. Error 2 (Windows Error 2)." I did this and it gave me the same message... Please help! How do i get iTunes running again?Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
It says this when I try to open iTunes:
Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again.
Error 2
I've tried uninstalling it and installing it several times. I've tried to download Apple Application Support separately but it just says:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4... Please refer to Help and Support for more information. HRESULT:0x800736FDYou have missing information in your Windows programming.
You need to repair your computer so it can run iTunes. If you plug those error codes into your browser you may get an answer. -
I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
"apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanksLet's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
when opening itunes i got the following message: "Apple Application Support was not found. Apple Application Support is required to run itunes. please uninstall itunes, then install itunes again Error 2 (Windows Error 2)." if i do this will i lose my music library?
Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L -
When I try to access Itunes Icon on my dell computer I get an Apple application support was not found. Apple application support required to run Itunes, and say uninstall itunes, then install itunes again. It used to work. What do I do?
I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally. -
iTunes would not open, telling me I needed to update to a newer vesion. I downloaded the latest but kept bing met with the error 'Apple Application Support was not found. Apple application Support is required to run iTunesHelper. Please uninstal iTunes, then install iTunes again. Error 2'. I have uninstaled and installed countless limes over the past few months and still get the same message. How do I install Apple application support??
Like beaniespike and yourselves...I've tried everything to install itunes on my PC Vista Home Premium 32 bit system. Had older version of itunes running well on it but then just bought Ipod and hooked it up and was told to upgrade by uninstalling old version and reinstalling new version..oops..then the nightmares
Uninstalled /reinstalled
Disconnected all firewalls and antivirus and even uninstalled them with Revo..
with that effort..I then used winrar to extract to a file and manually install each piece..
all load EXCEPT Apple Application Support..but only if I do it manually..
Quicktime had to be manually installed.
Changed RegSZ to 0xFFFFFF value..still same error An error occurred during the installation of assembly policy 8.0 microsoft VC80. CRT, type =..blah, blah blah..ending HRESULT.... in middle of install..then at end error Apple Application Support not found error 2.
Whew..sooOO frustrated! Have Visual C++ 2005..am having trouble installing upgrades to it..
Windows Installer likes to quit alot..not sure how to fix that..urgh
Want to trash Ipod and itunes all together since finding solution that works for 2 days straight has been in vain!
Any help is much appreciated! -
I can successfully download iTunes on my PC, but receive an error message when I try to install the file: "Apple Application Support was not found... Error 2" I've tried deleting the file and reinstalling it to no avail. Any ideas?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am trying to install itunes on my pc again but keep getting an error that says'apple application support was not found. try reinstalling itunes.' error 2.
We have had itunes on this pc for 2 years and recently it wouldn't open and another error message kept popping up saying it couldn't open because MSVCR80.dll was missing. I have unistalled the apple programs and tried reinstalling several times but to no avail. Hopefully my music library is not gone. Any Ideas out there?With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)
Maybe you are looking for
-
Multiple file formats and stacking
Like many on this forum I need to keep track of the original RAW and other formats of the same file. This is for several reasons: 1. I have a large number of already converted RAW files into JPG and TIFF files, which I want to manage in the LR librar
-
IPhoto '08 Cannot Delete Video
Hello, Recently, I upgraded to iPhoto 7.1 (347) and am having a problem handling videos... I have 175 movies taken with my digital camera imported into my library (and they have been there since I upgraded from iPhoto 6.x). One day, I decided that I
-
Hello SAP Community! I need a connection to a MySQL database from SAP. I read the post from Gudmundur Karlsson, How can I connect to MySQL external database, and followed his description. He said that we should use MSSQL as DBMS, but I am not able to
-
Why can´t i restore my iphone 5 in itunes? Keeps saying: You request couldn´t be processed.
Bought a second hand iphone 5 to use in Europe. But phone is locked to Verizon. Tried to call Customer Care but didn´t succeed. Tried to restore in itunes but itunes keeps telling me: Your request couldn´t be processed.
-
Automating qmaster commanderDoc creation
I really like being able to submit to qmaster via the command line. Unfortunately it doesn't look like it supports more complex submissions via the command line. e.g. i would like to submit two maya commands and a shake command that are serialized. c