Insufficient privileges using execute immediate in after logon trigger

I have an after logon trigger that executes a package/procedure in the schema it was created in.
One of the procedures runs the following:
EXECUTE IMMEDIATE 'AUDIT INSERT TABLE, UPDATE TABLE, DELETE TABLE, EXECUTE PROCEDURE BY ' || USER;
The procedure is throwing an insufficient privileges error when executing this.
However - the schema owner has audit any and audit system privileges and - the statement works fine independently.
When I login as another user this issue arises. The package/procedure are created with definers rights... So - i'm not sure why this is happenening.
Any help is appreciated.

privileges acquired via ROLE do NOT apply within named PL/SQL procedures.
SQL> SET ROLE NONE
SQL> --issue AUDIT again now

Similar Messages

Privileges to EXECUTE IMMEDIATE

Hi all,
In PL/SQL code, I am getting error msg : " ORA-01031 Insufficient privileges " for EXECUTE IMMEDIATE 'CREATE TABLE ...' .
which grants I have to provide for the same ?
FYI that I can create a same table from same schema name using SQL prompt.
Thanks & regards
sanjay

Did you get the create table privilage through a role? You need a direct grant of the create table privilage if you want to create tables in a PL/SQL procedure using execute immediate.
Consider:
SYS> create user tab identified by tab default tablespace users quota unlimited on users;
User created.
SYS> create role create_tab;
Role created.
SYS> grant create table to create_tab;
Grant succeeded.
SYS> grant create procedure to create_tab;
Grant succeeded.
SYS> grant create session to tab;
Grant succeeded.
SYS> grant create_tab to tab;
Grant succeeded.
SYS> @reconn tab;
Connected.
Session altered.
Session altered.
Session altered.
TAB> create table test1(id number);
Table created.
TAB> begin
2 execute immediate 'create table test2(id number)';
3 end;
4 /
PL/SQL procedure successfully completed.
TAB> create or replace procedure create_tab as
2 begin
3 execute immediate 'create table test3(id number)';
4 end;
5 /
Procedure created.
TAB> exec create_tab;
BEGIN create_tab; END;
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "TAB.CREATE_TAB", line 3
ORA-06512: at line 1
TAB> conn sys/oracle as sysdba
Connected.
Session altered.
Session altered.
Session altered.
SYS> grant create table to tab;
Grant succeeded.
SYS> @reconn tab;
Connected.
Session altered.
Session altered.
Session altered.
TAB> exec create_tab;
PL/SQL procedure successfully completed.as you can see you need a direct grant of create table to do this in PL/SQL stored procedures.
cheers

Using execute immediate creating a table from another

hi friend i wanted to create a table from a select statement in a pl sql procedure. i am using execute immediate but getting problems with it pls can anyone help me.
here is the query i am using
EXECUTE IMMEDIATE 'CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE '%some_string%');
i need to know if this can be done and if yes how. pls help me its bit urgent too. the schema name is same and the privileges are available to create tables too.

Your syntax is wrong.
If you would use a syntax higlighted editor, it would show.
Yout try to execute a string where another string is embedded. Please use two times single quote or use the 'q' function:
This one is correct:
EXECUTE IMMEDIATE 'CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE ''%some_string%'')';
or this one:
EXECUTE IMMEDIATE q'|CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE '%some_string%')|';
good luck

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Selecting data from a table using Execute Immediate in 9i

Hi,
I was wondering how I would be able to do a SELECT on a table using EXECUTE IMMEDIATE. When I tried it (with the proc below), I got the following below. Can anyone tell me what I am doing wrong?
Using Scott/Tiger I tried this:
SQL> ed
Wrote file afiedt.buf
1 CREATE OR REPLACE PROCEDURE P2
2 IS
3 v_SQL VARCHAR2(100);
4 BEGIN
5 v_SQL := 'Select * from Emp';
6 EXECUTE IMMEDIATE v_SQL;
7* END;
SQL> /
Procedure created.
SQL> exec p2
PL/SQL procedure successfully completed.
SQL> set serveroutput on
SQL> exec p2
PL/SQL procedure successfully completed.
SQL>
Thanks in advance.
Sincerely,
Nikhil Kulkarni

1 CREATE OR REPLACE PROCEDURE P2
2 IS
3 v_SQL VARCHAR2(100);
erec emp%rowtype;
4 BEGIN
5 v_SQL := 'Select * from Emp';
6 EXECUTE IMMEDIATE v_SQL into erec;
7* END;
SQL> /

Oracle 11G Copying a table using execute immediate

I want to copy the contents of one table into another using execute immediate.
This keeps failing with the following error
ORA-00903: invalid table name
ORA-06512: at "TABLE_COPY", line 6
ORA-06512: at line 8
create or replace
procedure TABLE_COPY(
TABLE1 varchar2,
TABLE2 varchar2)
is
begin
execute immediate 'insert into '||TABLE2||' (select * from '||TABLE1||')';
end;
Edited by: user9213000 on 24-Jan-2013 07:38

user9213000 wrote:
I want to copy the contents of one table into another using execute immediate.
This keeps failing with the following error
ORA-00903: invalid table name
ORA-06512: at "TABLE_COPY", line 6
ORA-06512: at line 8
create or replace
procedure TABLE_COPY(
TABLE1 varchar2,
TABLE2 varchar2)
is
begin
execute immediate 'insert into '||TABLE2||' (select * from '||TABLE1||')';
end;
Edited by: user9213000 on 24-Jan-2013 07:38The standard advice when (ab)using EXECUTE IMMEDIATE is to compose the SQL statement in a single VARCHAR2 variable
Then print the variable before passing it to EXECUTE IMMEDIATE.
COPY the statement & PASTE into sqlplus to validate its correctness.

Using EXECUTE IMMEDIATE with an NVARCHAR2 parameter

Hi everyone,
In the system I'm working on, my stored procedure receives an NVARCHAR2 parameter which contains a complete SQL statement. e.g.
'UPDATE SomeTable SET SomeTable.Value = 0'
I want to be able to execute this dynamically, using EXECUTE IMMEDIATE, but I've encountered a problem where this is apparently not supported (because the string is Unicode).
It is crucial that the string stays as Unicode, because of the data that may possible be baked into the SQL statement, and so casting it off to a VARCHAR2, or changing the parameter type, is not acceptable.
Is there a work-around for this issue? Even if it has a performance hit, it will be better than nothing :)
I've tried something like this;
declare
myVal VARCHAR2(256);
begin
myVal := 'UPDATE SomeTable SET SomeTable.Value = 2';
execute immediate 'BEGIN :x; END;' using myVal;
end;
But I get an error;
"bind variable 'X' not allowed in this context"
Has anyone any ideas?
Thanks for your help,
Chris

uhmm, I'm not sure if this is a valid testcase. the string could still be converted into ascii or we8iso8859p1 or whatever 1byte-character set you want.
What I think you should test is a two-byte character as part of SQL, PL/SQL resp. as in SQL all words are defined you can not enlarge it with a 2byte word. But in PL/SQL you could define your own variable. If this variable name itself contains a 2byte character, I guess it will fail.
(I have used l_vär and l_vér as variable names in my example)
Message was edited by:
Leo Mannhart
According to the PL/SQL Reference Guide PL/SQL consists of:
PL/SQL programs are written as lines of text using a specific set of characters:
Upper- and lower-case letters A .. Z and a .. z
Numerals 0 .. 9
Symbols ( ) + - * / < > = ! ~ ^ ; : . ' @ % , " # $ & _ | { } ? [ ]
Tabs, spaces, and carriage returns
This seems no longer up-to-date as I could define a variable l_vär for instance as long as I use a 1byte char set (like iso8859p1). The same variable name as a n-byte char set like UTF-8 will give an error as my example shows.

Using EXECUTE IMMEDIATE with XML

Database version : 10.2.0.3.0 - 64bi
Hi All,
I have a xml which is stored in a table, xmltype column.
i have target insert tables whose column names and xml nodes are same.
using all_tab_columns table i will generate columns to be passed to xmltable.
all these data i will store in variables and finally pass to xmltable as below
just want to know using execute immediate is good to use in XML?
SQL_STMT := 'insert into '||table_name|| ' ( '||V_COLUMN_NAME||')';
SQL_STMT := SQL_STMT ||' SELECT ' ||V_XTAB_COLUMN_NAME ||
' FROM TO_XML,
XMLTABLE(' ||v_xpath||
'PASSING XML_VALUE
columns ' || V_COLUMNS_DATA_TYPE
||') XTAB
WHERE Seq_NO = ' || P_SEQUENCE_NO ;
EXECUTE IMMEDIATE SQL_STMT ;
Thanks and Regards,
Rubu

1) is it OK? As I stated above, it can be made to work. It would not be my first choice, but then none of us here know the full details as well as you do so maybe there is a compelling reason to use dynamic SQL.
Here is the documentation for [url http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/executeimmediate_statement.htm#LNPLS01317]EXECUTE IMMEDIATE.
Actually now I finally realize your XML resides in table TO_XML so that means you won't be putting the actual XML into the shared pool via an incorrectly written dynamic SQL statement at least. That is what Odie and I were first concerned about with dynamic SQL usage, that the XML would be hard-coded into your SQL_STMT variable. You are simply changing the columns (in 3 locations). With that setup, you have no need for (nor can use) bind variables. The overall issue of dynamic SQL being slightly slower than static SQL still exists as the SQL statement will first have to be parsed and validated.
A larger issue in terms of performance is how 10.2 handles XMLTypes. If the underlying XML is large, XMLTable performance degrades quickly. Options around this are to parse the XML in PL/SQL or to upgrade to some version of 11 and use SECUREFILE BINARY XML as the underlying storage structure for the TO_XML.XML_VALUE column.

Problem in Update statement using Execute Immediate

Hi All,
I am facing problem in update statement.
I am creating dynamic sql and use "execute immediate" statement to execute a update statement.
But it is not updating any thing there in the table.
I have created a query like :
update_query='Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
Execute immediate update_query using V_Id;
commit;
But it is not updating the table.
I have a question , is execute immediate only does insert and delete?
Thanks
Ashok

SQL> select * from t;
                 TID P
                 101 N
SQL> declare
2     V_Id          number := 101;
3     Table_Name    varchar2(30) := 'T';
4     update_query varchar2(1000);
5 begin
6     update_query := 'Update '|| Table_Name ||' t set t.process_status =''Y'' where t.tid=:A';
7     Execute immediate update_query using V_Id;
8     commit;
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> select * from t;
                 TID P
                 101 Y

Create temp table using EXECUTE IMMEDIATE

Is there any performance issue in creating globally temp table
using EXECUTE IMMEDIATE or creating globally temp table from
SQL PLUS.
Any response will be greatly appreciated.
null

Anish,
Creating tables is likely to be an expensive operation.
Performance issues can only be considered in comparison to
alternatives.
Alternatives include: PLSQL tables, cursors and/or recoding so
that tmp tables are not required. (One of our consultants reckons
that sqlserver temp tables are usually used to get around
limitations in sqlserver, ie slightly more complicated sql
statements could be used instead of simpler sql and temporary
tables).
I would think creating the temp table once during sqlplus would
be cheaper than creating and deleting it repeatedly at run time.
Note that EXECUTE IMMEDIATE may do an implicit commit (dbms_sql
certainly does). This may be got over my using the PRAGMA
AUTONOMOUS_TRANSACTION; direction which places a
procedure/function in a seperate transaction.
Turloch
P.S. We have some difficulty in getting information back from the
field/customer sites. If you have questions and answers that are
likely to be useful to other Oracle Migration Workbench
users, and migrators in general, please send them in for possible
inclusion in our Frequently Asked Question list.
Oracle Migration Workbench Team
Anish (guest) wrote:
: Is there any performance issue in creating globally temp table
: using EXECUTE IMMEDIATE or creating globally temp table from
: SQL PLUS.
: Any response will be greatly appreciated.
Oracle Technology Network
http://technet.oracle.com
null

CREATE TEMPORARY TABLE USING EXECUTE IMMEDIATE

Hi All,
i have a question,
how can i create a temporary table using EXECUTE IMMEDIATE ??
Like:
CREATE GLOBAL TEMPORARY table new_table as (Select * from old_table);
Thanks,
Edited by: xDeviates on Jun 11, 2012 3:13 PM

It looks like you are approaching the problem incorrectly. As I suggested in Dynamic Select, it sounds like you, at most, want a function that returns a SYS_REFCURSOR (it's still not obvious to me why you would even want/ need to resort to dynamic SQL in the first place)
CREATE OR REPLACE FUNCTION get_dynamic_cursor( p_table_name IN VARCHAR2 )
RETURN sys_refcursor
IS
l_rc sys_refcursor;
BEGIN
OPEN l_rc FOR 'SELECT * FROM ' || dbms_assert.sql_object_name( p_table_name );
RETURN l_rc;
END;which you can then call from your application
SQL> variable rc refcursor;
SQL> exec :rc := get_dynamic_cursor( 'EMP' );
PL/SQL procedure successfully completed.
SQL> print rc
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        801
        20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1601        300
        30
      7521 WARD       SALESMAN        7698 22-FEB-81       1251        500
        30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7566 JONES      MANAGER         7839 02-APR-81       2976
        20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1251       1400
        30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2851
        30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7782 CLARK      MANAGER         7839 09-JUN-81       2451
        10
      7788 SCOTT      ANALYST         7566 19-APR-87       3001
        20
      7839 KING       PRESIDENT            17-NOV-81       5001
        10
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7844 TURNER     SALESMAN        7698 08-SEP-81       1501          0
        30
      7876 ADAMS      CLERK           7788 23-MAY-87       1101
        20
      7900 JAMES      CLERK           7698 03-DEC-81        951
        30
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7902 FORD       ANALYST         7566 03-DEC-81       3001
        20
      7934 MILLER     CLERK           7782 23-JAN-82       1301
        10
14 rows selected.Justin

Using EXECUTE IMMEDIATE for DML

What benefit is there to use EXECUTE IMMEDIATE for an UPDATE statement like the one below.
EXECUTE IMMEDIATE 'UPDATE mytable SET bonus = v_bonus(i)
                   WHERE empid =:empid AND sal =:sal'
                          USING v_empid(n),v_sal(i);This UPDATE sql is not dynamically created. So is there any performance benefit associated with using
EXECUTE IMMEDIATE for this UPDATE? Can't i just use a normal UPDATE without EXECUTE IMMEDIATE?

Ran these same tests with SQL_Trace turned on, ran the trace files through tkprof and look at what it tells us:
declare
begin
for i in 1 .. 100000 loop
gso_prueba_a();
end loop;
end;
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.07       0.08          0          0          0           1
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.07       0.08          0          0          0           1Now a slow one
declare
begin
for i in 1 .. 100000 loop
execute immediate 'call gso_prueba_b()';
end loop;
end;
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1     36.07      36.54          0          0          0           1
Fetch        0      0.00       0.00          0          0          0           0
total        2     36.07      36.54          0          0          0           1but with this slow one, we see LOTS of recursive SQL - the 'call gso_prueba_b' is getting parsed a gazillion times with the resulting CPU consumption
SQL ID : 1uu09hhqdp1yz
call gso_prueba_b()
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute 99989      2.42       2.72          0          0          0           0
Fetch        0      0.00       0.00          0          0          0           0
total    99990      2.42       2.72          0          0          0           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 91     (recursive depth: 1)
SQL ID : dcstr36r0vz0d
select procedure#,procedurename,properties,itypeobj#
from
procedureinfo$ where obj#=:1 order by procedurename desc, overload# desc
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        2      0.00       0.00          0          4          0           1
total        4      0.00       0.00          0          4          0           1Lots, lots more like this last one but having different SQL ID
By wrapping the procedure call in a dynamically created anonymous block, you are incurring LOTS of overhead.
What is it that you are trying to simulate.
What are you trying to do?

Using execute immediate in form

hi all
how can I use Execute Immediate In form It give me error but In sql no error
thank you

There are two options.
1. FORMS DDL
2. Call a backend function or procedure which has got EXECUTE_IMMEDIATE in it.
Following procedure can be used to execute the dymanic sql in forms.
Create this procedure in backend.
CREATE OR REPLACE PROCEDURE pr_execute_immediate (p_sql_stmt VARCHAR2) IS
BEGIN
EXECUTE_IMMEDIATE(p_sql_stmt );
END pr_execute_immediate;
Edited by: Narayan H on Jun 2, 2010 4:00 AM
Edited by: Narayan H on Jun 2, 2010 4:03 AM
Edited by: Narayan H on Jun 2, 2010 4:05 AM

Create Partition tables in PL/SQL using Execute Immediate

Hi
I have to create a partiton table in PL/SQL using Execute Immediate. I concat the necessary Create Table syntax into a variable and use Execute Immediate variable name. This gives a error ORA-00900: invalid SQL statement. However if i cut and paste the SQL statement from DBMS_OUTPUT, the table creation goes through without any problem.
What could be the issue. Has anyone face this before please.
I am using 10G DB

Thanks for your reply. It is a big code. I am pasting the part required.
v_sqlstmtout :='CREATE TABLE a_10(MYDATE DATE NOT NULL,ID NUMBER(14) NOT NULL)';
v_sqlstmtout := v_sqlstmtout || ' PARTITION BY RANGE (MYDATE) ';
v_sqlstmtout := v_sqlstmtout || 'SUBPARTITION BY HASH(id) ';
v_sqlstmtout := v_sqlstmtout || 'SUBPARTITION TEMPLATE(';
v_sqlstmtout := v_sqlstmtout || 'SUBPARTITION SP1,SUBPARTITION SP2) ';
v_sqlstmtout := v_sqlstmtout || '(PARTITION mth_dummy VALUES LESS THAN ';
v_sqlstmtout := v_sqlstmtout || '('||V_SQLSTMT3||')' || v_sqlstmt||')';
EXECUTE IMMEDIATE ''''||v_sqlstmtout||'''';
variables are substituted through data from different tables.
The output looks like the following
CREATE TABLE a_10(MYDATE DATE NOT NULL,ID NUMBER(14) NOT NULL)
PARTITION BY RANGE (mydate) SUBPARTITION BY HASH(id) SUBPARTITION
TEMPLATE(SUBPARTITION SP1,SUBPARTITION SP2) (PARTITION mth_dummy VALUES
LESS THAN ('01-MAY-2006'), PARTITION mth_JAN2007 VALUES LESS THAN
('01-FEB-2007'))
The above is the output from DBMS_OUTPUT. If i run this statement the table is created. Please help..

Andydata.getObject in piecewise mode using execute immediate statement err

andydata.getObject in piecewise mode using execute immediate statement
will get ora-00600 arguments:[kopuigpfx1], [14] in Oracle 11.1.0.6 and Oralce 10.2.0.2.
andydata.getObject in piecewise mode using execute immediate statement err
andydata.getObject in piecewise mode using execute immediate statement will get ora-00600 arguments:[kopuigpfx1], [14] in Oracle 11.1.0.6 and Oralce 10.2.0.x
The following are test scripts in HR schema.
create type ob_test is object(c1 varchar2(10));
script 1: not using execute immediate statement and works fine.
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
DECLARE
p_anydata2 anydata := p_anydata;
p_value_1 VARCHAR2(4000);
p_value_2 OB_TEST;
p_result PLS_INTEGER;
BEGIN
p_anydata2.piecewise;
p_result := p_anydata2.getvarchar2(p_value_1);
p_result := p_anydata2.getobject(p_value_2);
END;
END;
script 2: using execute immediate statement will get ora-600
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
EXECUTE IMMEDIATE 'DECLARE' || chr(10) ||
' p_anydata2 anydata := :1;' || chr(10) ||
' p_value_1 VARCHAR2(4000);' || chr(10) ||
' p_value_2 OB_TEST;' || chr(10) ||
' p_result PLS_INTEGER;' || chr(10) || 'BEGIN' ||
chr(10) || ' p_anydata2.piecewise;' || chr(10) ||
' p_result := p_anydata2.getvarchar2(p_value_1);' ||
chr(10) ||
' p_result := p_anydata2.getobject(p_value_2);' ||
chr(10) || 'END;'
USING p_anydata;
END;
script 3: comment statment "p_result := p_anydata2.getobject(p_value_2);", it works ok.
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
EXECUTE IMMEDIATE 'DECLARE' || chr(10) ||
' p_anydata2 anydata := :1;' || chr(10) ||
' p_value_1 VARCHAR2(4000);' || chr(10) ||
' p_value_2 OB_TEST;' || chr(10) ||
' p_result PLS_INTEGER;' || chr(10) || 'BEGIN' ||
chr(10) || ' p_anydata2.piecewise;' || chr(10) ||
' p_result := p_anydata2.getvarchar2(p_value_1);' ||
chr(10) ||
' /*p_result := p_anydata2.getobject(p_value_2);*/' ||
chr(10) || 'END;'
USING p_anydata;
END;
Could someone tell me how to solve this problem.
Thanks a lot.
Daniel

andydata.getObject in piecewise mode using execute immediate statement
will get ora-00600 arguments:[kopuigpfx1], [14] in Oracle 11.1.0.6 and Oralce 10.2.0.2.
andydata.getObject in piecewise mode using execute immediate statement err
andydata.getObject in piecewise mode using execute immediate statement will get ora-00600 arguments:[kopuigpfx1], [14] in Oracle 11.1.0.6 and Oralce 10.2.0.x
The following are test scripts in HR schema.
create type ob_test is object(c1 varchar2(10));
script 1: not using execute immediate statement and works fine.
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
DECLARE
p_anydata2 anydata := p_anydata;
p_value_1 VARCHAR2(4000);
p_value_2 OB_TEST;
p_result PLS_INTEGER;
BEGIN
p_anydata2.piecewise;
p_result := p_anydata2.getvarchar2(p_value_1);
p_result := p_anydata2.getobject(p_value_2);
END;
END;
script 2: using execute immediate statement will get ora-600
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
EXECUTE IMMEDIATE 'DECLARE' || chr(10) ||
' p_anydata2 anydata := :1;' || chr(10) ||
' p_value_1 VARCHAR2(4000);' || chr(10) ||
' p_value_2 OB_TEST;' || chr(10) ||
' p_result PLS_INTEGER;' || chr(10) || 'BEGIN' ||
chr(10) || ' p_anydata2.piecewise;' || chr(10) ||
' p_result := p_anydata2.getvarchar2(p_value_1);' ||
chr(10) ||
' p_result := p_anydata2.getobject(p_value_2);' ||
chr(10) || 'END;'
USING p_anydata;
END;
script 3: comment statment "p_result := p_anydata2.getobject(p_value_2);", it works ok.
DECLARE
p_anytype anytype;
p_anydata anydata;
p_value_1 VARCHAR2(4000);
p_value_2 ob_test;
p_result PLS_INTEGER;
BEGIN
anytype.begincreate(dbms_types.typecode_object, p_anytype);
p_anytype.addattr('A1',
dbms_types.typecode_varchar2,
NULL,
NULL,
4000,
NULL,
NULL,
NULL);
p_anytype.addattr('A2',
dbms_types.typecode_object,
NULL,
NULL,
NULL,
NULL,
NULL,
anytype.getpersistent('HR', 'OB_TEST'));
p_anytype.endcreate();
anydata.begincreate(p_anytype, p_anydata);
p_anydata.setvarchar2('abc');
p_anydata.setobject(OB_TEST('abc'));
p_anydata.endcreate;
EXECUTE IMMEDIATE 'DECLARE' || chr(10) ||
' p_anydata2 anydata := :1;' || chr(10) ||
' p_value_1 VARCHAR2(4000);' || chr(10) ||
' p_value_2 OB_TEST;' || chr(10) ||
' p_result PLS_INTEGER;' || chr(10) || 'BEGIN' ||
chr(10) || ' p_anydata2.piecewise;' || chr(10) ||
' p_result := p_anydata2.getvarchar2(p_value_1);' ||
chr(10) ||
' /*p_result := p_anydata2.getobject(p_value_2);*/' ||
chr(10) || 'END;'
USING p_anydata;
END;
Could someone tell me how to solve this problem.
Thanks a lot.
Daniel

Insufficient privileges using execute immediate in after logon trigger

Similar Messages

Maybe you are looking for