Integrate Multiple BPEL Process into one project

Hi,
Can anyone help for the following problem?
We created different BPEL process.One bpel process calls the another bpel process internally .
EX:
process1,process2 and process3.
In side process1, I will call process2 and process3.
I want to integrate all 3 process into one.
Can anyone help how can i do this.
Thanks in advance.
Thanks,
Bharath

Can't you create a new process, copy everything between the main-scopes of the other processes to the new process (skip some of the receives and callbacks so you have 1 receive and 1 callback left), copy all the variables, namespaces, xsl mappings, and try again.
it's more a bit of 'trial and error' and see what's left.
Hope you can use this a bit.

Similar Messages

Multiple BPEL processes polling one inbound directory ?

Hi All-
Somewhere it mentioned that :
"Multiple BPEL processes or multiple file adapters polling one inbound directory are not supported. Ensure that all are polling their own unique directory."
Is this issue still there in 10.1.3.3.0?
Please advice.
Regards,
Sreejit

Hi,
I have one directory say c:/files and I have two BPEL process accessing this folder say BPELA and BPELB.
BPELA looking for the file with pattern file_A*.xml
BPELB looking for the file with pattern file_B*.xml
Still this phrase *"Multiple file adapters polling one inbound directory are not supported. Ensure that each is polling its own unique directory."* is a problem?
Please advice.
Regards,
Sreejit

Multiple BPEL Process Managers in one environment?

Hi,
I'm quite new to the Oracle SOA product line, so please be gentle when my question doesn't make sense.
I’m in the process of designing a new enterprise architecture based on service orientation. I’m looking at the Oracle SOA Suite software to get a better understanding of what things will look like when getting to the actual implementation.
Some internal projects are moving fast, so I’m trying to get an understanding on how things will work out in the future. One case has my current attention, related to the BPEL Process Manager.
A 3rd party vender is offering a specific solution which is using or based on the BPEL Process Manager. This solution can be purchased as a black-box. From the perspective of my new architecture I would like to purchase the SOA suite as a whole. New developments will most likely be using the BPEL Process Manager for orchestration. But when purchasing the black-box application, the environment will be extended with an extra BPEL Process Manager. My first thought is to try and incorporate the BPEL processes from the 3rd party vendor onto one single BPEL Process Manager. But I also think two BPEL Process Managers can have advantages.
I’m not sure how to go forward with this. How should I handle this? Is it common to have multiple BPEL Process Managers in one environment or should I pursue maximum integration and only go for one BPEL Process Manager?

Hi,
We have similar situation at my current client site and we are going with two seperate BPEL PM installs for various reasons. One of the main driver in our case is conflicting in timelines of two seperate projects.
But my suggestion is to go with single enterprise install if that's not breaking the 3rd-party vendor supporting contracts. This has obviously benefits of redecued infrastructure/administrative and other related costs. How many processes does the vendor has as part of their solution? If they are handful you know it doesn't justify having seperate environments.
On the otherhand having two seperate installs isn't bad either depending on how big or small your SOA service/process orchestration footprint is. We don't have complete handle on the performance/scalability aspects of BPEL PM based on number of processes deployed. But as you can see that may be one of drivers to have redundancy in BPEL PM servers.
End of the day there is no clear cut answer. If you have funding and resources, go with two seperate instances. But from architectural perspective better to have single install with clustering for better performance/scalability.
HTH
Regards,
Rajesh

How To Integrate BPEL Process Into Oracle Weblogic Portal 10.3

Hi All,
I have bpel process which which has db adapters and Human Work Flow. I need to integrate this bpel process [ created using Oracle SOA Suite 10131] with Oralce weblogic portal 10.3
Please let me know how to achieve this.
Thanks,
Irfan Khan

Hi All,
I tried to call my BPEL Process thru JSP.
This is how my JSP looks like:
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<%@ page import = "com.oracle.bpel.client.Locator" %>
<%@ page import = "com.oracle.bpel.client.NormalizedMessage" %>
<%@ page import = "com.oracle.bpel.client.dispatch.IDeliveryService" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>InvokeHelloBPELProcess</title>
</head>
<body>
<%
String name = request.getParameter("name");
if(name == null) name = "HelloBPEL";
String xml = "<name xmlns=\"http://xmlns.oracle.com\">"+name+"</name>";
// Connect to the default BPEL domain using Locator
// Please set the password (bpel is initial password)
Locator locator = new Locator( "default", "welcome1" );
IDeliveryService deliveryService =
(IDeliveryService)locator.lookupService
(IDeliveryService.SERVICE_NAME);
//Construct the normalized messaged and send it to the oracle BPEL PM
NormalizedMessage nm = new NormalizedMessage();
System.out.println(" -=-=-=-=-=-=-= XML: "+ xml);
//attach the payload to the NormalizedMessage
nm.addPart("payload", xml);
//Post the message to the HelloBPEL process
deliveryService.post("HelloBPEL", "initiate", nm);
out.println("The BPEL process HelloBPEL initiated!!!");
%>
</body>
</html>
Now once i invoke this JSP page I am getting the 500 internal server error.
The error message is :
java.lang.Exception: Failed to create "ejb/collaxa/system/DeliveryBean" bean; exception reported is: "javax.naming.NameNotFoundException: While trying to lookup 'ejb.collaxa.system/DeliveryBean' didn't find subcontext 'collaxa'. Resolved 'ejb'; remaining name 'collaxa/system/DeliveryBean'
Here I have some doubts:
1) If xml payload that I am passing is correct?
2) In Locator, do I need to pass 'domain' along with 'password' as my password or it will always be "bpel". i.e.,
a) Locator locator = new Locator( "default", <password> );
OR
b) Locator locator = new Locator( "default", "bpel" );
Please let me know how to solve this error. I doubt that my xml payload constructed is wrong. could you tell me what is the correct xml payload for below BPEL process WSDL file:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="useWebServiceBpelProcess"
targetNamespace="http://xmlns.oracle.com/useWebServiceBpelProcess"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/useWebServiceBpelProcess"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://xmlns.oracle.com/useWebServiceBpelProcess" schemaLocation="useWebServiceBpelProcess.xsd" />
          </schema>
     </types>
     
     <message name="useWebServiceBpelProcessRequestMessage">
          <part name="payload" element="client:useWebServiceBpelProcessProcessRequest"/>
     </message>
     <message name="useWebServiceBpelProcessResponseMessage">
          <part name="payload" element="client:useWebServiceBpelProcessProcessResponse"/>
     </message>
     
     
     <portType name="useWebServiceBpelProcess">
          <operation name="initiate">
               <input message="client:useWebServiceBpelProcessRequestMessage"/>
          </operation>
     </portType>
     
     <portType name="useWebServiceBpelProcessCallback">
          <operation name="onResult">
               <input message="client:useWebServiceBpelProcessResponseMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="useWebServiceBpelProcess">
          <plnk:role name="useWebServiceBpelProcessProvider">
               <plnk:portType name="client:useWebServiceBpelProcess"/>
          </plnk:role>
          <plnk:role name="useWebServiceBpelProcessRequester">
               <plnk:portType name="client:useWebServiceBpelProcessCallback"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>

Hello Apple community... I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents.

I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!

According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited

How to change a Async BPEL process into Sync bpel process

Hi All,
Can we change a bpel process which has been created by choosing the template as Asynchronous BPEL Process and after my requirement has
been changed i want to change my bpel process into synchronous bpel process. Is it possible to change the process or else we have to delete the whole process and once again we have to create a bpel process with synchronous template.
IF it possible to change the process from Async to sync how. is there any demo link on this. If possibel can anyone share a link on this.
Regards,
CH

Diff between ASYNC & SYNC
Composite.xml
SYNC: In service part in only interface.wsdl & binding.ws will be there
ASYNC: in service part interface.wsdl & binding.ws and one more callback binding.ws is there.
In .BPEL FILE
SYNC: In Partner Link name, partnerLinkType, MyRole will be there .
ASYNC: In partner Link name ,partnerLinkType,MyRole,Partner Role also will be there.
*.WSDL File*
SYNC: in portType Input & Output both are there , in partnerLinkType only one role is there i.e Requester Role no provider.
ASYNC: in portType only Input will there,in PartnerLinkType two roles will be there ProviderRole n Requester Role.
Also change the activity in the BPEL from Reply to Invoke in the end.
Respective to your requirements you can change your BPEL to Sync/ASync.
I hope it will help.

BPEL process having one file and one FTP adapters and single instance

hi All,
We have a customer requirement where we have to read from FTP location (XML every 5 Mins) and Local file system (CSV every Min).
There is no correlation between the files ...this file data could be same, only difference is some user will copy it in FTP location some in the local file system.
We need to pickup these file as it arrive in respective locations and read one particular value from it and set a global value and do some processing.
Next time when file arrives in any location (FTP or local) it should pickup the file compare the particular value to the global value which was set at the previous stage and do processing based on whether is greater or lesser and this reading should go on.
As files needs to be picked up every Minute, customer doesnt want to initiate multiple BPEL process ...everything should happen in the single instance.
how do solve this , pls help.
Regards,
Surendra

Hi Surendra,
When you say " everything should happen in the single instance", I hope you mean everything shud happen in the same BPEL process irrespective of the location(FTP or local) where file is copied.
So, what you can do here is instead of using a single receive activity. Make use of Flow activity and put 2 separate receive activities( one each for polling local and FTP location) in parallel.
After that you can separately act upon the variable from both the receive activities.
thanks
Saurabh

How can I combine to different projects into one project?

I would like to combine various projets into one project is the possible.

Hello Tom,
I have tried to copy and paste the two projects, both in the project library and in the timeline. In the timeline the paste option is not highlighted and paste does not work. In the project library I highlighted the project and copied the project, but I was unable to paste into the other project. Is this done in the project library? The paste option is hightlight but each time I paste it does not work.
Thanks for your help

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

How do I bind multiple PDF Documents into one single document?

I am trying to bind multiple PDF documents into one single document can anyone please help me?

You would need Adobe Acrobat to do that. Reader doesn't have the ability.

How do you merge multiple pdf's into one document?

How do you merge multiple pdf's into one document?

Hi pharmovative,
You can use the Combine PDF feature of Adobe PDF pack to combine multiple PDF files into one document. (Or, if you have the full version of Acrobat, you an do it there as well by choosing Create > Combine Files into a Single PDF.)
Please let us know if you need further assistance.
Best,
Sara

HT1918 Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

Is there a way to consolidate multiple Apple IDs into one if they are all issued to the same persons(s)?

No. Unfortunately, you can't combine Apple IDs togetehr, even if you own them all.

Best approach to join multiple statistics tables into one

I have read different approaches to join multiple statistics tables into one, they all have a column "productobjectid".
I want to get all data for each product and put it to excel and output a jpg statistic with cfchart.
How would you do this, the sql part?
Thanks.

A couple suggestions:
1) when joining tables, its best to list both table/fields that you are joining in the FROM clause:
FROM shopproductbehaviour_views INNER JOIN shopproductbehaviour_sails ON shopproductbehaviour_views.productobjectid = shopproductbehaviour_sails.productobjectid
2) You add tables to a SQL join by placing another join statement after the SQL above:
SELECT *
FROM TableA INNER JOIN TableB on TableA.myField = TableB.myField
INNER JOIN TableC on TableA.anotherField = TableC.anotherField
3) If you have columns in the tables that are named the same, you can use column aliases to change the way they appear in your record set:
SELECT TableA.datetimecreated 'tablea_create_date', TableB.datetimecreated 'tableb_create_date'
4) Certainly not a requirement, but you might want to look into using <cfqueryparam> in your where clause:
WHERE shopproductbehaviour_sails.productobjectid = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#all.productobjectid#">
You might want to consider checking out one of the many tutorials on SQL available online. Many of the questions you posed in your post are covered in pretty much every basic SQL tutorial. Alternately, a good SQL book is worth its weight in gold for a beginning web applications developer.

I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

I have a paid subscription, but am no longer able to merger multiple pdf documents into one pdf. What's up?

Pat:
Below is a copy of an 8/7/2013 email from adobe. I prepaid a one-year subscription, and, until I recently upgraded to Windows 8, I was able to make several dozens of merged pdf documents. I seem to be no longer able to use the merge feature that I had successfully and repeated used. When I search for the merge feature I end up with a request that I pay for an upgrade monthly subscription to use the merge feature.
Tom
=================================here follows my subscription email====================================================
Welcome to Adobe ExportPDF
2 messages
[email protected] <[email protected]>
Wed, Aug 7, 2013 at 1:01 PM
Reply-To: [email protected]
To: [email protected]
Dear Thomas Corr,
Thank you for purchasing a subscription for Adobe ExportPDF.
Sign-in to export a PDF Now >>
With your subscription you can:
Enjoy unlimited online conversions from PDF to Word (DOCX).
Make scanned text editable.
Maintain page, paragraph, and font attributes.
Preserve tables, images, and multi-column text.
Export PDF comments to Word.
Help and feedback
Get help from Adobe on the Support Center.
The Adobe ExportPDF Team

FCP 10.1.3 multiple graphic images into one frame

Hi - How do I put multiple graphic images into one frame? - so it kind of looks like a video wall - except these are still images. I can do it manually but it's not precise. Anyone found a way other than this? Thanks.

Here is my quick and dirty generator called "9 Pictures": https://www.dropbox.com/s/92c536wgesh2yzj/9%20Pictures.zip?dl=0
To install it, unzip the file and place the folder inside /Users/yourname/Movies/Motion Templates/Generators
It will look like this in FCP X. You just have to click each drop zone icon in the inspector and then select the desired clip from the browser. Use the Pan and Scale controls in the inspector to select which part of each image you want to use. Note: this was done in the hope that it may be helpful, but it is no more than a quick thing. You can also control-click the generator in the generator browser and choose open in motion (if you have it) to see how it was done and to modify it.

Integrate Multiple BPEL Process into one project

Similar Messages

Maybe you are looking for