How to change a Async BPEL process into Sync bpel process

Hi All,
Can we change a bpel process which has been created by choosing the template as Asynchronous BPEL Process and after my requirement has
been changed i want to change my bpel process into synchronous bpel process. Is it possible to change the process or else we have to delete the whole process and once again we have to create a bpel process with synchronous template.
IF it possible to change the process from Async to sync how. is there any demo link on this. If possibel can anyone share a link on this.
Regards,
CH

Diff between ASYNC & SYNC
Composite.xml
SYNC: In service part in only interface.wsdl & binding.ws will be there
ASYNC: in service part interface.wsdl & binding.ws and one more callback binding.ws is there.
In .BPEL FILE
SYNC: In Partner Link name, partnerLinkType, MyRole will be there .
ASYNC: In partner Link name ,partnerLinkType,MyRole,Partner Role also will be there.
*.WSDL File*
SYNC: in portType Input & Output both are there , in partnerLinkType only one role is there i.e Requester Role no provider.
ASYNC: in portType only Input will there,in PartnerLinkType two roles will be there ProviderRole n Requester Role.
Also change the activity in the BPEL from Reply to Invoke in the end.
Respective to your requirements you can change your BPEL to Sync/ASync.
I hope it will help.

Similar Messages

How to change the input and output schema in BPEL process

hi',
Please tell me how to change the input and output schema in BPEL process after the process is made.
thanks
Yatan

If your intention is just changing the content you are passing to bpel/returning from bpel
Here is another way
just update your default created xsd files with new elements, update wsdl elements in message definition and chnage bpel code to reflect new elements in activities
Regards,
Praveen

How to handle more than one message coming from an async BPEL in a sync BPEL process?

Here is the scenario,
Sync process A is calling an Async process B and Async process B is developed in such a way that it is returning more than one message to sync process A, how you will handle those messages in sync process A?

As durga said, its a wrong design, you will have issues in real time. You wont get the response back most of the time. It can be otherway around, async is waiting for sync process.
Change your design or provide what is your use case below, we can think of which design suits you.
Thanks,
Vijay

Async process to sync bpel process

Hi all,
I have one aync bpel process which invokes sync bpel process. In sync bpel process, it has only one assign activity, which assigns input to output. Iam trying to test this scenario using test suite available in 11.1.1.2.0.
I am receiving a time out fault. Can any one let me know, why this error occurs even though my sync bpel process doesn't have any wait or complex activities which takes long time to process.

Raghavendra,
You should check the syncmax wait time parameter on the server. It is this parameter that causes synchronous interfaces to time out .
- santosh

HT1918 How to Change my credit card payment into none on my Iso device

How to change my credit card payment option to none on my Iso device

iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311
View your info....

How to change the language from French into English in Photoshop CC in Creative Cloud

Hi,
I recently took a subscription for Creative Cloud (LR5 and Photoshop CC). I live in France but I am more used to English terminology and I'm currently doing Photoshop as e-learning on an American forum. (I'm not French). I managed to change the default language into English in LR5 but not in Photoshop. Could you please advise me how to proceed.
Your help would be much appreciated.

Hi Mariemeria,
Please refer to the following link to adjust the install language for creative cloud :
http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html
Regards,
Akshay

IN OBIEE How to change Writeback input text field into textarea?

HI,
I've got writeback working, OBIEE 10.1.3.3, but I want a 255 character in that writeback text field with word wrapping. because we Can't see to get input
type text to wrap, is it possible to change input type="text" to input type="textarea" for a writeback column?
I tried to included Html with javascript code in Writeback column properties under CSS custom option.it's also not working
HTML code:
<html>
<head>
<SCRIPT LANGUAGE="JAVASCRIPT">
function expandTextArea(textarealabel,e)
if((textarealabel.textLength %45==0)&(textarealabel.textLength>1))
if(e.which==8)textarealabel.rows=textarealabel.rows-1;elsetextarealabel.rows=textarealabel.rows+1;
</SCRIPT>
</head>
<body>
<FORM NAME="Workbook2" ACTION=" " METHOD="">
<TEXTAREA ID ="Text1" COLS="20" ROWS="2" style="overflow:visible" ONKEYDOWN="expandTextArea this,event);">
</TEXTAREA>
</FORM>
</body>
<f/html>
If you have any idea share with me ASAP.
Edited by: devarasu on Feb 23, 2011 6:57 PM

Hi thanks for your quick response,
1) i have cheked you link there is no word Wrapping output, I want to view my writeback filed morethan one line ,is there any way to set instead Horizondal and vertical bar in that writeback filed. like Auto extending TestArea (it have Scrolling bar).
2) Onemore thing also required,once i gave maximum length of WriteBack field 255 characters. but is not controlling it's allowing morethan 255 characters.kindly tell me how to control the lenth of the writeback field .
Note: I am using SQL server DB,in DB and BI Answres writeback column properties i given 255 characters only but it's allowing morethan 255 characters.
once again thanks to you.kindly help me on this ASAP.
Thanks and Regards,
Devarasu.R

How to change a Manual Input variable into a customer exit variable?

Hello,
I need to change the "processing by" option of an used BEx variable from "Manual Input" to "Customer Exit" but this field is not available (= in grey) in modification.
Does it exist a tip or a standard program to modify this no-accessible field of an existing BEx variable?
Thanks in advance for your answers,
Samuel

Hi,
I don't think it's possible (unless tweaking some parameters directly in some tables, as stated in the previous post) so you would have to create a new one and replace it.
Hope it helps,

SAP Cloud For Customer : How to change the Logo or Image into the Standard Form Template

Hi Experts,
I have requirement to change the standard template format.
I have copy standard template and edit using Adobe Life Cycle Designer to change the logo / image.
After changed and upload modified template and change the output setting for print i can able to see the changes but logo / image can not display.
Can anyone have idea how to solve this issue ?
Can we change the template within cloud system?
If Yes than How ?
Regards,
Mithun

The following are the instructions (November 2014 version of SAP Cloud for Customer)
Edit a Form Master Template
Overview
As an administrator, you can edit existing form master templates. These are used to define the header, footer, and logos used in form templates. Form master templates also contain an e-mail disclaimer that is appended to automatically generated e-mails sent to business partners when a document is output from the system.
Procedure
1. Go to Application and User Management or Administrator Business Flexibility Master Template Maintenance .
2. In the Master Template Maintenance view, select Form Master Templates from the Show menu.
3. Select the master template you want to edit and click Edit.
4. On the Form Master Template tab, do the following:
Under Header, click Upload and browse to find the file you want as logo. Adjust the size and alignment of the logo, as required.The file formats .gif, .bmp, .jpg, .png, and .tif are supported. The logo should not be larger than 40 mm width x 20 mm height. If you upload a graphic that is larger than 40 mm x 20 mm, it is resized automatically.Select the Header Divider checkbox if you want a graphical divider to appear on your form.Under Sender Address, enter your company’s address. The sender address is shown above the recipient's address in a letter.Under Footer, choose the number of footer columns you want to display. Enter the footer text exactly as you would like it to appear on the form. You can maintain up to 4 footer blocks with a maximum of 10 lines per footer.Note that the width of each footer block is equally divided over the available space. If a line of text in the footer is too long for the current font size, the system will automatically enter a line break. If this automatic line break does not meet your needs, you may need to enter the text after the line break as a separate line.To maintain multiple languages, you must first add the language from the Add menu and then maintain the texts in that language by selecting the language from the dropdown list.
5. Click the refresh button to preview your changes. From the dropdown list under Preview, you can select a country. The preview is then displayed using the country-specific template, for example, some countries do not use sender addresses or have different paper sizes.
6. On the E-Mail Disclaimer tab, you can enter a disclaimer or other company-specific legal information.
This text is appended to the main text body of e-mails that are created when a document is output by the system. It is not possible to create separate language versions of this text; therefore if your company uses multiple communication languages, you should enter all language versions of the disclaimer here.
7. Click Save and Close.
Result
If required, you can now assign the form master template to a company/org unit and/or output channel. For more information, see the Master Template Maintenance Quick Guide.
Note that master templates can be activated and deactivated for each form template in the Form Template Maintenance view. For more information, see the Form Template Maintenance Quick Guide.

How to change a .tiff grayscale logo into blue?

Hello all,
I've been trying to solve this problem for the past months. Everytime I needed our company logo, but everytime it failed and I setteled for the low resolution blue logo I allready have.
So far I tried combinations of the following:
changing .tiff into .PSD
grayscale into CMYK
changing hue and saturation
1 goto Layer - New adjustment layer - Curves - change the blend mode to "Screen"
2 goto Layer - New adjustment layer - Curves - change the blend mode to "Multiply"
this all results in a slightly lighter or darker picture, but no color..
all help is much appreciated,
Heinthis is the actual image

This way lets you specify the exact colour and vary the background colour, should you wish. It uses a masked Solid Color layer.
1. Open the grayscale image
2. Cmd/Ctrl-click the gray thumbnail in Channels panel to make a selection of luminosity
3. Press Shift+Cmd/Ctrl-i to invert selection
4. Mode > CMYK
5. Add Solid Color layer - blue
6. Add Solid Color layer - white
7. Put white layer below blue layer

How to change select upto 1 rows into read statement

Dear all,
Table A contains many dates for given salesdocumentnumber and
Table B contains many dates for given salesdocumentnumber .
Table A and Table B contains same entries .II need maxdate for all salesdocument in Table A comparing Table A and Table B
TableA_alias was sorted and deleted adjacent duplicates.
loop at TableA_alias
select pdate into variable_1 from table Table_A
UP TO 1 ROWS order by pdate descending
where
it_pdate-salesdoc = TableA_alias-salesdoc and
it_pdate-salesitem = TableA_alias-salesitem and
it_pdate-sline = TableA_alias-sline .
select pdate into variable_2 from table Table_B
UP TO 1 ROWS order by pdate descending
where
it_pdate-salesdoc = TableA_alias-salesdoc and
it_pdate-salesitem = TableA_alias-salesitem and
it_pdate-sline = TableA_alias-sline .
if variable_1 > variable_2.
   TableA_alias-pdate = variable_1.
else.
   TableA_alias-pdate = variable_2.
endif.
endloop.
Could anyone help me to make this code more performance tuned by using Read statement
Regards
Bala
Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting - post locked
Edited by: Rob Burbank on Nov 16, 2009 9:19 AM

hi Siegfried,
i need to make this code ,performance wise more optimized. could you please suggest how can i improve this
loop at it_pdate_temp into wa_pdate_temp.
select /bic/zpviewdt from /BIC/AZVFOSDP100 into variable_1
UP TO 1 ROWS
where
doc_number = wa_pdate_temp-salesdoc and
s_ord_item = wa_pdate_temp-salesitem and
sched_line = wa_pdate_temp-sline
order by /bic/zpviewdt descending .
endselect.
select /bic/zpviewdt from /bic/azvfosp1w00 into variable_2
UP TO 1 ROWS
   where
doc_number = wa_pdate_temp-salesdoc and
s_ord_item = wa_pdate_temp-salesitem and
sched_line = wa_pdate_temp-sline
order by /bic/zpviewdt descending .
endselect.
if variable_1 > variable_2.
   wa_pdate_temp-pdate = variable_1.
else.
   wa_pdate_temp-pdate = variable_2.
endif.
endloop.

How to change writeback input text field into textarea writeback field?

Hi,
I've got writeback working, OBIEE 10.1.3.3, but I want a 100 character in that writeback text field with word wrapping. because we Can't see to get input type text to wrap, is it possible to change input type="text" to input type="textarea" for a writeback column?
I tried to included Html with javascript code in Writeback column properties under CSS custom option that is also not working.
Thanks in Advance.
Devarasu.R

It's bug in obiee-writeback,it's resolved
by using external java-jsp application then it will resolved.

How to change the present English Version into German Version??

I want to get changed the language from now English back to German.

Indeed you get by extra downloading a Firefox-version in German (see above). But installing this you lose a lot, e.g. the bookmarks. The problem is, that the language changes from German zu English due to the automatic Firefox update. Before updating Firefox does not inform the users nor does Firefox ask the users whether they want the update. Users do not have any protection against this arbitraryness. The only solution is to use another browser.

How to change an ASM single-instance into a clustered ASM ?

Hi,
I have a node#1 with Oracle10gR2 installed (standard installation, not RAC).
Everything is in the ORACLE_HOME.
A unique single-instance database DB1 uses ASM#1 to access a diskgroup on a SAN.
I'd like to install Clusterware in a separate CRS_HOME (within the oracle account), and protect ASM#1 and the database DB1 using an application VIP.
The things is: I want to create another single-instance database DB2 on another node#2, with another ASM#2 instance.
I need a clustered ASM (with Clusterware) installation to do that because ASM#1 and ASM#2 need to access the same diskgroup.
I don't want to lose the existing data & configuration of the ASM#1 instance.
What modifications I need to do in the current ASM#1 instance on node#1 to make it Clusterware-aware ?
(Again, it's not a RAC installation...)
Thanks

Hi,
I finally found this Metalink Note 452758.1, which describe the procedure....
Any feedback about this ?

How to change the size of my media sync options?

When I got a message that I couild update my iOS for my iPod I clicked on it and got this message:
Updating to iOS 6.1.6 requires at least 530 MB of free space on your iPod. Please change your media sync options to make more storage available.
How do I increase my free space on my iPod to enable me to update to the latest iOS?

Remove some content from your device.
Open itunes, connect ipod select less to sync, sync
Or just update via itunes on your computer.

How to change a Async BPEL process into Sync bpel process

Similar Messages

Maybe you are looking for