Integrate SAP to another program by EDI message
I would like to integrate data between SAP and another application by using EDI concept (any SAP module). Is EDI congifuration / idoc in SAP standard ? or I have to integrate an EDI module to my current SAP module first ?
Voradanu,
I would like to integrate data between SAP and another application by using EDI concept (any SAP module).
I assume that when you say "EDI concept", you mean one of the various Electronic Data Interchange standards (e.g. EDIFACT, X.12, etc.). Within SAP ERP there is no "EDI Module". SAP does not provide EDI translators. If you want to output data using one of these EDI standards, you will probably have to purchase a third party EDI translator.
Do SAP EDI configuration / idoc are SAP standard ?
I am not sure what this means. As I said before, SAP ERP does not support EDI. However, SAP does provide IDOCs (Intermediate documents) for virtually any data export or import need. SAP has standard IDOCs, and they are also extensible, in that if the standards do not meet your requirements, you can create customized IDOCs.
or I have to integrate an EDI module to my current SAP module first ?
I am not sure what that means. Just about all SAP modules support export/import of IDOCs. Outgoing IDOCs in turn can be sent to an EDI Translator, where additional processing can be done, prior to creating the EDI message and transmitting to a partner. Likewise, you can use your EDI translator to receive EDI messages, perform additional processing, and then pass the results to SAP IDOC input processing.
Best Regards,
DB49
Similar Messages
-
When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnmYou may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0 -
i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).
Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?
Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3 -
I have just deployed an image to over 500 workstations, and they are all deep frozen using deepfreeze.
When users are logging in, and open Firefox they are getting the message "another program on your computer would like to modify firefox with the following add-on:" Adobe Acrobat - Create PDF 1.2
Yes I know u can do a one-time click and allow, but we have potentially 50,000+ students logging into these PCs and it is unacceptable that they are greeted with this message rather than the Homepage.
This is very dissapointing, as we upgraded to the latest version of firefox in preperation for rollout, and then added some software like adobe.
The profile is kept in the default user, so everytime a user logs in, they will get prompted with the message, and this will always happen because we use deepfreeze.
I need a FIX ASAP from mozilla on how to disable this pop-up via Group Policy...
Not at all happy,
SharpyHi,
One way you could try is to install Firefox on a fresh PC/image which has the same Adobe software versions installed as the clients. You may also have to install the same extensions as well as software for any additional plugins as on the clients. Start Firefox and make sure everything is okay. After that you can copy and overwrite the '''extensions.ini''', '''extensions.sqlite''' and '''pluginreg.dat''' files and probably the '''extensions''' folder and any supporting files of the extensions from this fresh profile, onto a client profile after temporarily disabling/unfreezing Deep Freeze. If everything is okay you can then push the changes onto the other clients via a logon/startup script after temporarily disabling Deep Freeze and then re-enable Deep Freeze.
[http://kb.mozillazine.org/Profile_folder Firefox Profile Folder]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files] -
I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?
If the form was created using LCD then it can only be edited there. This
application used to be bundled with Acrobat Pro, but that's no longer the
case. So if you want to edit this file then you need to purchase it, yes.
On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]> -
Hi all,
Is is possible to map EDI messages to SAP iDocs using Oracle Integration?
ThanksYes, OracleAS Integration has several components. One is called Integration B2B, which allow you to send and receive EDI messages. You can then pass this on either using Integration InterConnect or BPEL Process Manager to the SAP adapter which can talk to SAP systems using e.g. iDocs.
-
C7280 - Cannot scan. Error message says another program has control over the device
I opened the HP Device Manager to do a scan. I accepted the settings and the scan started. But part way through the scan, I stopped the scan as I realized that I wanted to change the resolution. I quit the Device Manager and restarted it but when I did, I got an error message saying:
"The function you have requested cannot be performed because another program has control over the device".
I don't have anything else open and so I can't work out what program has control over the printer.
C7280 Prtinter. Mac OSX 10.7.
This question was solved.
View Solution.I was thinking that if you stopped the process in mid-scan that there may be some background processes still running. Rebooting usually stops those processes.
No, you will not have to do this each time. Next time, though, it may be easier to just let the scan complete and the do another scan at whatever setting you want.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Question
why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." editSee also "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs -
Integrate SAP Portal within another intranet
We need to integrate SAP Portal within another intranet portal. The question is if technically, it's possible integrate SAP portal to display within a frame that is not the top frame of the window.
I had this same problem on another project and was not possible because the SAP portal needs to take the entire window (the reason is how it is implemented).
Could anybody confirm it?You can integrate the SAP Portal in another portal. To do so, integrate it by an iFrame.
To not show the whole SAP Portal navigation in the target portal, go through these links:
Embedding Enterprise Portal content in another webpage
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4a3addc4-0501-0010-bfbb-9cdd29581adf
You'll need to make a small configuration of your SAP Portal - that is: adding a new alias.
br,
Tobias -
What does the message "another program ha control of HP imaging mean when I am trying to scan something. How do i correct it?
You may need to ask HP. I had the same issue with a networked (via ethernet) home HP multi-function. Sometimes the only way to get it to scan was to completely disconnect it from the network and connect it to only one Mac with a USB cable. Even that did not alwatys work.
Eventually, Apple started pushing out HP printer updates via Software Update. One of those finally made that error message to go away.
So run Software Update and see it there are new drivers that Apple made avaialble. -
Package deployment keeps getting stuck with message 'Waiting for another program'
Hi, I just started working on SCCM. We have an Orchestrator runbook which creates a collection and then creates an advertisement for packages and task sequences. I was able to get a task sequence and a package successfully execute. When
creating the advertisement, I set it to RERUN_ALWAYS. However, the next time I ran our runbook which creates the collection andadvertisement (I manually deleted the previous one), it does create them but the deployment is stuck to In Progres with the
Description of 'Waiting for another program'. This just happens for packages before and not for task sequences the other day but now, it's the same issue whether I use a package or a task sequence.
I see this in execmgr.log:
<![LOG[Package UAT0007D, program Test is ready but can not be started because package , program is currently running.]LOG]!><time="17:07:20.993+480" date="02-06-2015" component="execmgr" context=""
type="1" thread="6804" file="executionrequest.cpp:9083">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramWaitingForAnotherProgram
AdvertisementId = "UAT2011A";
BlockingPackageID = "";
BlockingProgramName = "";
ClientID = "GUID:2FE27567-3215-4015-BE09-0E65F09767C8";
DateTime = "20150207010721.004000+000";
MachineName = "ACAA-UAT-SCCM";
PackageName = "UAT0007D";
ProcessID = 6316;
ProgramName = "Test";
SiteCode = "UAT";
ThreadID = 6804;
]LOG]!><time="17:07:21.010+480" date="02-06-2015" component="execmgr" context="" type="1" thread="6804" file="event.cpp:729">
<![LOG[Successfully raised SoftDistProgramWaitingForAnotherProgram event for program Test.]LOG]!><time="17:07:21.021+480" date="02-06-2015" component="execmgr" context="" type="1" thread="6804"
file="executionrequest.cpp:9128">yes check the exemgr.log file and also see is that package has dependency for another package? and if yes then that package is already available non DP?
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread. -
Executing a report program in background from another program
Hi Experts,
I developed a report to display material change history based on change date range. Report is taking much time (around 15-20 mins) as I'm hitting CDPOS and CDHDR tables. User wants to execute the report in foreground because he/she can give selection criteria that is required everytime.
So, my requirment is now to create another program with same selection screen elements which will execute the original program in background. In the new program, we will be just capturing the selection elements and will pass them to original program to run in background and display a message to user without wait for the background job to complete. Original program should send an email to an fixed email id with the report output as attachment (for example excel file).
Please suggest.
Thanks in Advance,
Siva SankarHi Siva,
Please see the link
http://help.sap.com/saphelp_nw04/helpdata/EN/2a/fa01dd493111d182b70000e829fbfe/content.htm
Regarding a Change Document Function Module ----- VERY VERY Urgent
When using function modules , I dont think you can directly get data based on material and plant . these function modules usualy works with object class and creation date .
Once you retrieve the data using the function modules you have to filter out the unncecessary data based on your selection screen conditions .
Regards,
Ratheesh BS
Edited by: Ratheesh Bhaskarapillai Suseeladev on Mar 8, 2012 5:19 AM
Regarding a Change Document Function Module ----- VERY VERY Urgent -
ABAP program to Cancel messages in Scheduled/Recorded status?
Hi,
Thanks for reading my post...
Can anyone tell me whether there is an ABAP program available (or a variant) that will Cancel messages that are in Scheduled (or Recorded) status?
Messages to be sent from ECC to PI were not sent and are left in Recorded status in ECC. I cannot find the documentation to explain what this status is, but I'm presuming that it's similar to the Scheduled status in PI (though there's not much documentation about that either - for example, what's the difference between the 'green flag' Scheduled and the 'green flag' Released for Processing (WS)? ). {Note to SAP: Could we have a state transition diagram please? Simple, concise and effective.}
Anyway, the 'tick-pencil' button in SXMB_MONI (aka. CTRL-F8) can be used to cancel the messages in Scheduled/Recorded status. But I'm looking for an ABAP program to do this. The documentation seems to 'suggest' that this button might do the same thing as the ABAP program RSXMB_CANCEL_MESSAGES. However, this ABAP program does not cancel messages in Scheduled status (only the messages in Error), whereas the SXMB_MONI CTRL-F8 'tick-pencil' will cancel messages in Scheduled status if they are selected.
Is there another ABAP program available to cancel messages in Scheduled status - or is it possible to create a variant of RSXMB_CANCEL_MESSAGES that will do this? (I'm not an ABAP programmer and I've never created a variant, but looking at the code, it seemed it might be possible to get the program to read messages in Scheduled status rather than Error status.)
Many thanks for any help.
MarkMessages are in scheduled status because they still in the queue in either 'READY' status or 'EXECUTING' status (see SMQ1/SMQ2). You don't want to automatically cancel messages that are in scheduled status because that means you are also going to cancel good messages. However, in some cases, you may want to cancel such messages especially when the message in the queue has been in 'Executing' status for long time (happens in case of long running mapping program or dropped connection etc). Such cases warrant manual intervention and hence the behavior as noted by you.
If you can tell me why exactly you want to cancel messages that are in scheduled status, I can help you more.
Thanks
KK -
Is possible to Integrate SAP BCM with Third party?
Hello Everyone,
Some of you can tell me if Is possible to integrate SAP BCM with another solution IBM ITSM?
The integration would also have the screen pop up the same or similar to SAP CRM.
Thanks in advance.
Best regards
Rodrigo LucasHi Rodrigo,
There is the ClientCOM interface!
The interface is an application programming interface (API) to a softphone client Communication
Desktop (CDT). This client application is based on the Microsoft Internet Explorer, and they can
handle telephone calls by using the VoIP (Voice over Internet Protocol) technology.
This interface defines a subset of the events and commands that are important to third-party
developers. Currently it is used finding out who is calling, and making outbound calls, playing
files to outbound callers.
You can download ClientCOM interface document in SAP Marketplace.
Best Regards,
Heber Olivar
Maybe you are looking for
-
Report Name for 109 mvt against PO no
HI Anybody can tell me which report give the 109 movement no against the po no. Thanks
-
Error when releasing billing to accounting document
Why we tried to release the billing to accounting document. There is the below error. Could someone please kindly help? Message Identification: F5 System Message Number: 358 Output type: E The Diagnosis is 'This document refers to a document which co
-
I updated my laptop to yosemite and now i cant upload pictures from my i phone
i updated my laptop to yosemite and now i cant upload photos from my i phone
-
How to: Netflow on a L3 Switch WS-C3560X-48P
Hello Community, I want to use netflow on our l3 switches. But my configurations dont work. What is my mistake? Modell: WS-C3560X-48P Software Version: 15.0(1)SE3 My Config: interface vlan 250 ip flow monitor Monitor-FNF input ip flow monitor Moni
-
Can I copy a radio button?
When using the radio button can you copy and paste for multiple lines and multiple pages with the same layout?