Integrating Adobe Flex in Visual Composer

Hi,
I want to display a list in a tree structure and based on what was chosen on the structure, a detailed information of the item is displayed in a separate window. If you can imagine: left hand side is the tree structure and on the right is the detailed information.
I'm going to use Visual Composer to show the detail information and I did some research and it seems there's no way to set up so that a tree structure is shown if I use Visual Composer. So, now I'm thinking of using Adobe Flex for doing that.
My problem is now understanding how I can incorporate Adobe Flex during the design in Visual Composer and use eventing to pass on the information on what the user chose to the BAPI that will show the detailed information. I also found out that the Flex Server should be configured in the Visual Composer. Can anyone advice?
Also, does anyone know if modeling tree structure in Visual Composer is possible?
Thanks in advance.

Hello,
You can do this by first embedding Flex into a Web Dynpro application and then consuming this WebDynpro application in a VC model.
Here are some resources:
1. Embedding a Flash island in a WD application:
[The specified item was not found.|The specified item was not found.]
2. Consuming a WebDynpro component in a VC model:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20327c85-9bbc-2b10-968b-bca4bdfa45c6?overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20327c85-9bbc-2b10-968b-bca4bdfa45c6?overridelayout=true]
Hope this helps,
Natty

Similar Messages

Are there any recent tutorials or information for integrating Adobe Flex with Ruby on Rails 4?

I've combed and searched extensively and most of the documentation is anywhere from 4 to 7 years old. A lot of it focuses on outdated gems or libraries. I've even seen Rails 2.0 as a focus for a lot of this information.
I would just like to know if anyone has any valid resources for the latest Adobe Flex integrating with a Rails 4.x application. And, if so, where is this hidden information listed or located?
Thanks.

I've combed and searched extensively and most of the documentation is anywhere from 4 to 7 years old. A lot of it focuses on outdated gems or libraries. I've even seen Rails 2.0 as a focus for a lot of this information.
I would just like to know if anyone has any valid resources for the latest Adobe Flex integrating with a Rails 4.x application. And, if so, where is this hidden information listed or located?
Thanks.

Instantiating an Adobe form from Visual Composer

Hello Experts,
I have a requirement, wherein I have to instantiate an adobe form, send it thru email and start a new process when an input form(created in Visual Composer) is submitted. Kindly assist me with this on how to proceed. Any useful links will be really helpful.
Cheers,
Madhu

Adobe Reader (which is showing you your PDF even inside SAP) has built in function allowing to scale document to the size of paper in the printer. But this is function of Adobe Reader (not the form itself) and can help only if you are ready for some "help" from the user at the time of printing.
If you want to do it directly (without user intervention), than I'm afraid there are no built-in function for page scaling inside PDF. But you can include two master pages of different sizes in the design of your Adobe form and choose one of them during form generation according to your needs. Please have a look at my old post [here|Is it possible to trigger the pages differently; on how to do it.

Career in webdynpro with adobe flex

Hi,
I have 3+ years of Exp in SAP ABAP.Now i want to go for some advance things in SAP.I have worked on webdynpro and adobe forms.How is webdynpro with Adobeflex career and how is it from market perspective.
Also there is webdynpro with visual composer.how is the growth in that side.Can I start learning the adobe flex or visual composer or is there something else like CRM,XI,BI that I should go for.
Kindly suggest.
Regards
Lalit

hi lalit,
check the below links to know more on [webdypro abap + felx|http://forums.adobe.com/message/1081492] and [thread|WebDynPro ABAP in adobe flex client; in sdn, [Integration of Flex to sap|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0765c3d-2f49-2d10-3db3-ad81bca0cd63].
and about [visual composer.|What is the scope of the Visual Composer;. and the carer in Bi is also good you can check a lot of threads on Moving to BI,XI,CRM in this forum.
Regards
Mahesh

Difference between web reports created in WAD & Visual Composer

Hi All,
Can anyone tell me
1.The Difference between web reports created in WAD & Visual Composer.
2.The Webreports created in Visual Composer is availble for normal users(users not having Visual composer).
3.how to create web reports & Publish using Visual composer.
Waiting for results.
ThanKs in Advance,
Basava Raju

hi james..
Check these.
WAD: http://help.sap.com/saphelp_nw2004s/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
VC: http://help.sap.com/saphelp_nw2004s/helpdata/en/42/c2ba7f545e3116e10000000a1553f7/frameset.htm
Visual Composer is a model-driven development tool that allows business experts to create and adapt analytical and free-styled applications without writing code. Visual Composer 7.0 is the General Availability (GA) release; Visual Composer 6.0 introduced the freestyle model-to-code creation of analytical appli- cations and it was intended as a preview tool for evaluation purposes.
Visual Composer now connects to SAP NetWeaver BI via a Remote Function Call (RFC) rather than a Web service connection. The resulting communication between the portal and SAP NetWeaver BI works faster, especially in cases of large query results. With these added functionalities, users can create more user-friendly, powerful analytical applications using Visual Composer, such as Executive Dashboards.
Visual Composers Features -
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9326072e-0c01-0010-bc97-f72e93338101
New Features of Visual Composer 7.0
Visual Composer 7.0 is part of SAP NetWeaver Portal in SAP NetWeaver 2004s. This release focuses on SAP Analytics and offers significant changes from the previous Visual Composer release. The most notable changes include:
Visual Composer now runs on the Java 2 Platform, Enterprise Edition (J2EE) Engine of SAP NetWeaver Application Server (SAP NetWeaver AS). Therefore, you no longer need Internet Information Services (IIS) 5, Microsoft SQL Server 2000, and Microsoft .NET Framework.
Visual Composer now can generate iViews for Web Dynpro (the SAP NetWeaver programming model for user interfaces) and Adobe Flash Player 8 or higher in SAP NetWeaver Portal. You can create Internet applications by integrating Adobe Flex Server and Web Dynpro.
Visual Composer now integrates BI content from SAP or non-SAP systems using BI Java Connectors (part of BI Universal Data Integration 7.0).
/message/3240694#3240694 [original link is broken]
/message/2958672#2958672 [original link is broken]
These are the links which i followed.
https://www.sdn.sap.com/irj/sdn/visualcomposer
http://www.sap.com/platform/netweaver/components/visualcomposer/index.epx
http://help.sap.com/content/documentation/netweaver/docu_nw_vc.htm
VC - Install and Configure guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1d55042e-0c01-0010-e3a3-b009c445ee23
Preparing to Use Visual Composer
http://help.sap.com/saphelp_nw04s/helpdata/en/44/429c8b709914bce10000000a155369/content.htm
hope it helps..

Integration of Flex with Aprimo Lead Management

Has anybody worked on integrating Adobe Flex with Aprimo Lead Management? If so,how can it be done?

"jonpor" <[email protected]> wrote in
message
news:gbj914$ct$[email protected]..
> If you do any asp.net you've probably seen and used an
updatepanel. You
> are
> right, it is AJAX. An "updatepanel" is an asp.net
control that
> encapsulates the
> AJAX functionality to do partial page postbacks in
Asp.net. With an
> updatepanel, you can trigger ajax postbacks on parts of
a page (whatever
> is in
> the updatepanel). Problem I'm having is when I trigger
an update on the
> client
> side, it is triggering 'the whole page' to update,
rather than only
> posting
> back what is in the panel. This is probably a better
question for an
> asp.net
> site, but figured someone in the flex/flash camp might
have figured out
> how to
> do it.
>
> Since I'm putting Flex in Asp.net, figured I'd try to
look for an answer
> here
> rather then getting flamed on a Microsoft board for
using Flex.
I'd look at using ExternalInterface to fire of the js methods
that run the
AJAX.
HTH;
Amy

SAP Netweaver Visual Composer using Adobe Flex

Hi,
where to get Adobe Flex for SAP Netweaver Visual Composer.
Instead of using Adobe SVG Viewer we need to use Adobe flex so where can i find
that one please help me.
regards,
jasmine

Hi Jasmine,
You can use VC only if you have SVG viewer installed, that is one of the prerequisite. SVG Viewer is used for design. When you deploy your model you have an option to view it either in HTML (Web Dynpro) or Flex (Adobe Flex).
Hope it helps.
Regards,
Dharmi

Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

Integration of Adobe Flex with SAP Web Dynpro ABAP

I am new to adobe flex development. i am following a tutorial prepared by
Mr. Karthikeyan Venkatesan (Infosys Technologies Limited) Integration of Adobe Flex with SAP Web Dynpro ABAP-for ABAPers
He used flex 3 to develop the flex application. i am using flex 4 downloaded from adobe(At a time Build release I used low version only 3.5). I followed all the steps. At a time of Run the data was not came.
How to fetch the data?
Please Guide how to proceed.

Hi Laxmikanth,
For Adebo Flex help..
Please go through Thomas tutorial..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163&overridelayout=true
and ...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480?quicklink=index&overridelayout=true
Hope it might helps you
Thanks,
Kris.

BI Integration Wizard in Visual Composer Error

Hi Experts,
I try to run BI run BI Integration Wizard in Visual Composer.
It is displaying me an error
Warning 2005:There are no BI systems defined in portal.In order to use the BI Integration Wizard,You must first define atlease one BI system based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Before i contact my Basis/Portal team i would like to know what does it mean
Could you please update me what does creating a BI system in portal based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Thanks

Hi,
Yes ,Even you have the BI system in portal the Connector for
that sytem is RFC not Other connectors
you can check for the type of connector in the portal click on the system open its properties there you find the Connector type
go for connection properties option.
see for more details.
[https://www.sdn.sap.com/irj/sdn/wiki]
Regards,
Goivndu

Integration Visual Composer and BPM (netwearver CE7.11)

Hi Guys.
System: netwearver CE7.11
We have a problem with the process of integration between Visual Composer and BPM. We have found a message |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2011e628-b317-2c10-9fa7-952155e10705] explaining the step by step to join my visual compeser with BPM.
The steps from guide(the guide includes a video) already have been implemented and the final result looks fine, but it is in this moment, when we want to create and deploy the BPM process with the result from guide(Web dynpro wrapp with the visual composer), when the error happens, the BPM process is created OK but not properly deployed.
Could anyone help us?, thank you in advanced.
The message error is:
Status ERROR
Plugin : com.sap.ide.tools.services
code=0
children=[
Status ERROR
Plugin : com.sap.ide.tools.services
code=0
Deploy Exception.
com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DependenciesResolvingException.
Reason: ASJ.dpl_dc.006505 [ERROR CODE DPL.DC.3033] An unresolved dependencies error occurred while sorting the deployment batch items regarding the dependencies.; nested exception is:
com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDependenciesException: [ERROR CODE DPL.DC.3437] Unresolved dependencies found for the following deployment items: [
1. Component: name: [firsttask], vendor: [demo.sap.com], location: [localDevelopment], version: [20090617122840], software type: [J2EE], csn component: [], dependencies: [[name: 'tcblloggingapi', vendor: 'sap.com', name: 'tcddicruntimefacade', vendor: 'sap.com', name: 'tcaiibaseofflinefacade', vendor: 'sap.com', name: 'tccmi', vendor: 'sap.com', name: 'tcvcglxbridgecomp', vendor: 'test.sap.com', name: 'tcblexceptionlib', vendor: 'sap.com', name: 'tcbljrfcapi', vendor: 'sap.com', name: 'tcwdapi', vendor: 'sap.com']]
Unresolved dependency:
name: 'tcvcglx~bridgecomp', vendor: 'test.sap.com' ( not found in the admitted batch items and the repository)
Edited by: iaspano on Jun 18, 2009 5:31 PM

Hi,
Is 'tcvcglx~bridgecomp' already deployed or part of the deployment? There is a deploy time dependency specified. Thus without this DC the other DC won't deploy.
Cheers
Martin

'BI Integration Wizard' in Visual Composer.

Hi Experts
I am new to Visual Composer.
Could you please update me what is the use of 'BI Integration Wizard' in Visual Composer.
Thanks

Hi,
useing BI Intergartion wizrd we are integratng the BI applications in VC.
it means we can develop the all analtyic applications which are using te BI or BW data.
seethe help link
[http://help.sap.com/saphelp_nw04s/helpdata/en/d0/a6f6dae3224d50abca99051bb6e2b8/frameset.htm]
Regards,
Govindu

Using FLEX Visual Composer iViews in Guided Procedures and the UWL

Hello Experts,
I am trying to display a GP workitem and I am getting this error
"The portal page builder required to execute this callable object is not available."
I have a GP Process and it haves FLEX Visual Composer iView, it runs fine un the Runtime workbench from Guided procedures Role, but when I configure de GP UWL Connector and try to open a GP workitem with a VC FLEX iView i got the error "The portal page builder required to execute this callable object is not available." Guided procedures with webdynpro iView works fine.
I have a NW 7.0 SP10
Could you please help me undertand what configuration I am missing??
Regards.

Hi Daniel
Please go through the following link(looks like a helpful one):-
Link Between Visual Composer and Guided Procedure
Regards
Navneet

Integrating apache velocity and adobe flex

Hi,
I am doing a project in flex and which needs designing of
some templates based on the user requirements and i would like to
use apache velocity(
http://velocity.apache.org/engine/releases/velocity-1.5/)
tool for template designing, but i want to know how far it is
possible to implement apache velocity template inside flex, i would
like to use apache velocity template to integrate with the flex in
client side. if it is not possible is there any other template
designing tools which helps to integrate with flex
Regards
Kumar E

hi
any help is appreciated about integrating Apache velocity
with adobe flex technology
Regards,
srinil

Visual Composer FLEX Server error

Hi guys,
I'm very new to VC and when I try to deploy my VisualComposer app I get this meesage:
Error in compiling Flex application (1). Consult log file for details.
Can anyone help? I dont know where the log file is to check it!
Thanks
Tony

Hi Tony,
I think you'll have better luck with this question over in the Visual Composer forum:
SAP NetWeaver Visual Composer
Regards,
Scott Jones

Integrating Adobe Flex in Visual Composer

Similar Messages

Maybe you are looking for