Integrating BEA weblogic server with Oracle Advanced Queue

Hi all,
Does any one has experience in configuring Weblogic server interface/listen to Oracle AQ.

Similar Messages

Integrating MS BizTalk Server with Oracle Financial

Hi..
I'm looking for solution to enable Microsoft BizTalk Server 2000 integrates with Oracle Fin apps. I'm not familiar with Oracle Finance, please advise the most common scenario applied. I knew Compaq IOrchestration can do this integration, but if possible, I'd like to prevent the use of other 3rd parties product.
Thanks
Krisna
null

Hi..>I'm looking for solution to enable Microsoft BizTalk Server 2000 integrates with Oracle Fin apps. I'm not familiar
with Oracle Finance, please advise the most common scenario
applied. I knew Compaq IOrchestration can do this integration,
but if possible, I'd like to prevent the use of other 3rd
parties product.>Thanks>Krisna>null

Error connecting WLS 10.3.1 JMS & MDBs with Oracle Advanced Queuing

I followed the guide at http://blogs.oracle.com/imc/2010/12/how_to_use_oracle_aq_with_message-driven_beans_in_weblogic.html. Since the AQ queues were already set up by SAs and had been working with stateless session beans, I assume they're OK for use with MDBs. Names had to be changed in the WLS foreign server definition, destinations & connection factories to match.
My MDB is:
package xxxx;
import javax.ejb.MessageDriven;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.MessageListener;
import javax.jms.TextMessage;
@MessageDriven(name = "TestQueueListenerEJB")
public class TestQueueListener implements MessageListener
public void onMessage(Message message)
if ( message instanceof TextMessage )
try
System.out.println("AQMDBTest: text message " + ((TextMessage)message).getText() + " processed");
catch (JMSException e)
e.printStackTrace();
else
System.out.println("AQMDBTest: generic message " + message.toString() +
" of type " + message.getClass().getName() + " processed");
And the relevant portion of the weblogic-ejb-jar.xml is:
<weblogic-enterprise-bean>
<ejb-name>TestQueueListenerEJB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>1</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>TestQueue</destination-jndi-name>
<connection-factory-jndi-name>TestQueueConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
</weblogic-enterprise-bean>
So when I deploy this to my test domain I get an error:
<Feb 23, 2011 3:11:28 PM CST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: TestQueueListenerEJB is unable to connect to the
JMS destination: TestQueue. The Error was:
Can not get destination information. The destination JNDI name is TestQueue, the provider URL is null>
The test connection of the datasource is successful.
What else could I have wrong? This is my first post to this topic. Please let me know what additional information I need to provide about this. Or if I've provided too much.
Thanks very much,
Jim Greetham

OK. So I got my DBAs to create a new user with the necessary privs. Created a new queue, table, etc. I have been able to receive messages from it. So I have some looking to do in my production database queue definitions.
Jim

Integrating Apahce HTTP server with Oracle Entitlement Server

Hi,
In our project we are trying to protect a applicaiton via Oracle entitlement server. And the login page for the same is hosted on the Apache server. But we are facing issue with the Log In page.
My apache is installed int he c:\apache folder.
The ssm folder for apache is c:\bea\ales32-ssm\apache-ssm\instance\asm1\config
the wles_module is at c:\bea\ales32-ssm\apache-ssm\lib\mod_wles.dll
I have added the follwoing lines in my httpd.conf file
LoadModule wles_module c:\bea\ales32-ssm\apache-ssm\lib\mod_wles.dll
<IfModule mod_wles.cpp>
WLESConfigDir c:\bea\ales32-ssm\apache-ssm\instance\asm1\config
</IfModule>
But while access the Apache home page I am gettign the error saying -
[Mon Mar 02 17:50:46 2009] [error] Unable to get HTTPServer instance, please check configuration.
[Mon Mar 02 17:50:46 2009] [error] WLESConfigDir=c:\\bea\\ales32-ssm\\apache-ssm\\instance\\asm1\\config
Please let me knwo if I am missing any.

I am trying to access the URL -
http://<servername>:8080/test/foo.html where test/foo.html is located at c:\apache\apache2 (the docroot of Apache)
The Default.properties is as follow -
# Default policydomain settings for this runtime. Each policydomain can override these settings by creating their own
# configuration file named after the policydomain - if the policydomain is named "mydomain" then it's properties is named
# "mydomain.properties"
# All of these settings persist until the server which uses this runtime is shut down and restarted (loaded once on startup)
### Authentication settings
# Order in which authentication methods are valued. First mechanism takes precedence over the latter. Valid values are
# FORM - authenticate the user by collecting credentials (asking the user questions)
authentication.precedence=FORM
authentication.initialForm=/test/NamePasswordForm.html
authentication.nameCallback[]=username:/test/NamePasswordForm.html
authentication.passwordCallback[]=password:/test/NamePasswordForm.html
authentication.onatnfailure=/test/atnfailure.html
authentication.onatzfailure=/test/atzfailure.html
authentication.default.resultform=/test/loggedin.html
### Single-sign on domain. Must include at least 2 dots. For example: .bea.com
authentication.cookiedomain=.bea.com
### SAML Identity Transfer settings
# If this is set to true, SAML identity transfer is accepted in the post handler
saml.incoming.enable=false
# The URL that consumes SAML Browser/POST data -- SAMLIn.html is a sample
saml.incoming.url=<SAMLAssertionConsumerServiceURL>/test/SAMLIn.html
# If this is set to true, SAML SSIs are enabled, allowing for outgoing identity transfer via the SAML template
saml.outgoing.enable=false
### Role Mapping Settings
# Any value other than "true" is false and disables role mapping
rolemapping.enable=false
# The name of the variable injected into the request stream which contains a comma seperated list of roles
rolemapping.name=WLES_ROLES
### Credential Mapping Settings
# Any value of than "true" is false and disables credential mapping
credentialmapping.enable=false
# A comma seperated list of credentials to query the runtime for on each request. If the examples
# exist they will be added into the request stream and made availble to subsequant cgis
# If the credentials don't exist or are not defined no credentials are injected into the request stream
credentialmapping.credtypes=weblogic.UserPassword
# The name prepended to the credential before it is added to the request stream. A number may be added to make the name
# unique - i.e. CRED1=B64(SAMLResponse) CRED2=DBPassword etc
credentialmapping.prefix=CRED
### Session settings
# Session inactivity timeout in seconds
session.inactivity.timeout=600
# Session absolute timeout in seconds - causing the user to re-authenticate - zero means never
session.absolute.timeout=86400
# Session logoff URL
session.forcedlogoffURL=/test/logoff.html
# Session cookie prefix - used to create a unique session cookie - any string including null will do - a unique code is attached to the prefix
session.cookie.name=ALESIdentityAssertion
# Session cookie prefix - used to create a session cookie for non sensitive data
session.misc.cookie.name=WLES_MISC
# The SSM WS Configuration ID
ssmconfig.default=asm1
### Naming Authorities
namingauthority.resource=ARME_RESOURCE_AUTHORITY
namingauthority.action=ARME_ACTION_AUTHORITY
namingauthority.audit=AUDITBASE
webservice.registry.url=http://192.168.179.130:9000/ServiceRegistry
### SSL Settings
# Directory that contains ssl PEM and configuration files (such as wles-ssm.pem).
# Use forward slashes (/) even on Windows. For example: c:/path1/path2/ssl
ssl.directory=C:/bea/ales32-ssm/apache-ssm/instance/asm1/ssl
### Debug Settings
# The log level (Possible values are error or debug)
log.level=error

Oracle WebLogic Server with Oracle Developer 10g

Hello Friends
Currently I have customize product with I am using Oracle Developer 10gR2 as Front End, AS10gR2 as Middle Tier and DB10g as Back End. Now I want to replace the Middle Tier by Oracle WebLogic. My question is to all of you that Is it possible? If yes then I would like to request all of you please share some configuration document or Metalink Note ID which can help me to configure it.
Thanks
Makshud

This link should answer your questions.
http://www.oracle.com/technology/products/jdev/htdocs/11/as_supportmatrix.html
I cant find your configuration listed.
thanks,
Anoop

Using WebLogic Server with Oracle9i RAC

A new white paper has been posted to dev2dev -
"Using WebLogic Server with Oracle9i RAC" at
http://dev2dev.bea.com/products/wlserver81/whitepapers/wls_bea_hp.jsp
Abstract:
"This paper presents best practices when using WebLogic Server with Oracle Real Application Clusters. It includes an analysis of
various use-case and failure scenarios and proposes possible recovery solutions. This paper also includes an evaluation of
Transparent Application Failover, a product from Oracle that is functionally similar to WebLogic Server MultiPools."

"satyam" <[email protected]> writes:
Can I use WebLogic Application Server 6.0, the mid level server (not the express
or the enterprise version)
with VisiBroker 4.x ?If you have ejb support - then yes - although you may want to wait for
a future 6.0 rolling patch to get updated IDL generation.
andy

Integrating WebSphere MQ 5.3 with BEA Weblogic Server 9.2 3M

I am trying to integrate WebSphere MQ 5.3 with BEA WebLogic Server 9.2 3M. I have found the guide:
Integrating WebSphere MQ 6 with BEA Weblogic Server 10 using Weblogic Server's Foreign (JMS) Server feature [http://ibswings.blogspot.com/]. I have done all steps according this guidance.
I have made modification since, WebLogic Server 9.2 3M does not support EJB 3.0, I am using EJB 2.1, any changes that have been made is create ejb-jar.xml file and configure it according next guide
At the final step when I am deploying service-jar-files (for ex. ejb.jar), I am able to complete this procedure.
When I am starting service (for ex. ejb.jar) from Deployments I am facing a wall: exception appears
weblogic.application.ModuleException: Exception starting module: EJBModule(EJB)
Unable to deploy EJB: EJB.jar from EJB.jar:
com/ibm/mq/jmqi/system/JmqiComponent
at weblogic.ejb.container.deployer.EJBModule.start(EJBModule.java:505)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:18
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.lang.NoClassDefFoundError: com/ibm/mq/jmqi/system/JmqiComponent
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at com.ibm.msg.client.wmq.factories.WMQFactoryFactory.createProviderXAConnectionFactory(WMQFactoryFactory.java:388)
at com.ibm.msg.client.jms.admin.JmsConnectionFactoryImpl.setProviderFactory(JmsConnectionFactoryImpl.java:170)
at com.ibm.mq.jms.MQConnectionFactory.<init>(MQConnectionFactory.java:240)
at com.ibm.mq.jms.MQQueueConnectionFactory.<init>(MQQueueConnectionFactory.java:76)
at com.ibm.mq.jms.MQXAQueueConnectionFactory.<init>(MQXAQueueConnectionFactory.java:69)
at com.ibm.mq.jms.MQXAQueueConnectionFactoryFactory.getObjectInstance(MQXAQueueConnectionFactoryFactory.java:77)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
As you can see weblogic complains about com.ibm.mq.jmqi.system.JmqiComponent, I googled JmqiComponent but dose not exists which is strange :P. Has anybody what is a reason for such a behaviour.

Hello.
I would ditch the foreign JMS approach. There is a detailed example of how to use the resource adapter for the same goal here:
WebSphere MQ resource adapter and Weblogic - how?
While Oracle supports foreign JMS, IBM won't. The only pattern that both IBM and Oracle support is resource adapter.
Let me know, if you need more guidance.
-Adrian

Integration Oracle Advance Queue with OSB

We are doing integration for Oracle Advance Queue with OSB.
I created an AQ adapter in Jdev and generate the WSDL and XSD.
I imported both WSDL and XSD in OSB Project.
When i am configuring the business service and selecting the WSDl i am not able to select Binding and ports, is it due to any issue in WSDL?
Please help.
Thanks,
Mihir Panda

Hi again,
I made some adjustments to your wsdl. I added the binding part and its reference to the appropriate port.
Now I reckon, you should be able to do your thing:
<wsdl:definitions
name="enq"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/aq/Applicatio90/Project4/enq"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/aq/Applicatio90/Project4/enq"
xmlns:opaque="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns:obj1="http://xmlns.oracle.com/xdb/APPS"
xmlns:ph="http://xmlns.oracle.com/pcbpel/adapter/aq/headers/payloadheaders/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<plt:partnerLinkType name="Enqueue_plt" >
<plt:role name="Enqueue_role" >
<plt:portType name="tns:Enqueue_ptt" />
</plt:role>
</plt:partnerLinkType>
<wsdl:types>

<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/aq/headers/payloadheaders/"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:obj1="http://xmlns.oracle.com/xdb/APPS" >
<import namespace="http://xmlns.oracle.com/xdb/APPS" schemaLocation="xsd/APPS_WF_EVENT_T.xsd"/>
<complexType name="enqHeaderCType" >
<sequence>

<element name="PayloadHeader" type="xs:string" />
</sequence>
</complexType>
<element name="enqHeader" type="ph:enqHeaderCType" />
</schema>
<schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns="http://www.w3.org/2001/XMLSchema" >
<element name="opaqueElement" type="base64Binary" />
</schema>
</wsdl:types>
<wsdl:message name="Enqueue_msg">
<wsdl:part name="opaque" element="opaque:opaqueElement"/>
</wsdl:message>
<wsdl:message name="Header_msg">
<wsdl:part name="Header" element="ph:enqHeader"/>
</wsdl:message>
<wsdl:portType name="Enqueue_ptt">
<wsdl:operation name="Enqueue">
<wsdl:input message="tns:Enqueue_msg"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="Enqueue_Binding" type="tns:Enqueue_ptt">
     <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="Enqueue">
               <soap:operation soapAction="put_your_own_URI_here"/>
               <wsdl:input>
                    <soap:body use="literal"/>
               </wsdl:input>
          </wsdl:operation>
</wsdl:binding>
<wsdl:service name="EnqueueService">
     <wsdl:port name="Enqueue_ptt" binding="tns:Enqueue_Binding">
          <soap:address location="No Target Adress"/>
     </wsdl:port>
</wsdl:service>
</wsdl:definitions>
Good luck.
Regards,
Ronald

Weblogic JMS bridge between Weblogic and oracle Advanced Queue

Hi,
We are facing some issues when we are trying to integrate with Oracle AQ JMS through Weblogic.
We have configured a Foreign AQ server which points to the oracle Advanced Queue and we are trying to create a Weblogic JMS bridge between AQ and weblogic. The bridge works perfectly if create the connection factories and bridge destinations with NonTX mode. The issue is with XA mode. Also we have deployed the Resource adaper for XAResource to use XA transactions.
No help is available for the exception on google too :)
Following is the exception we are getting.
<An error occurred in bridge "aqjmsbridge" during the transfer of messages (javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XA_OK
javax.transaction.xa.XAException: method start should not be called on weblogic.transaction.internal.IgnoreXAResource
at weblogic.jms.foreign.IgnoreXAResourceImpl.start(ForeignAQIntegration.java:260)
at weblogic.connector.security.layer.AdapterLayer.start(AdapterLayer.java:513)
at weblogic.connector.transaction.outbound.XAWrapper.start(XAWrapper.java:466)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1184)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1117)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:275)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:516)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:443)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy59.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1427)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1002)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1079)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.).>
Will appriciate any help for the above.
Thanks and Regards,
Navin

Maybe this if of any help:
- Re: Help with creating AQ JMS
or
- Re: AQ Weblogic integration - JMS-107: Operation not allowed on Connection

Inqmy resource adapter for SAP with Bea Weblogic Server

          Hi everybody,
          Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
          It works well with INQMY server, but with BEA I'm getting a lot of problems creating
          the connections.
          Thanks in advance.
          Xavi.


All,
          Here are the steps we (used for internal testing) had to perform to get
          IN-Q-MY adapter for SAP to work with WebLogic:
          The wli.adapter.inqmy.sapr3.spi package contains extensions to the
          In-Q-My J2EE Connector Architecture classes to overcome some limitations
          in the base implementation classes. To get around these issues, we had
          to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
          R3ConnectionFactory classes.
          * The javax.resource.spi.ManagedConnectionFactory implementation
          does not over-ride the equals and hashCode methods correctly. This
          causes problems with WLS 6.1.
          * There is a bug in their javax.resource.spi.ConnectionManager
          implementation for non-managed uses of the adapter. Consequently, their
          adapter cannot be used in a non-managed scenario.
          * The javax.resource.cci.ConnectionFactory class does not support
          the getConnection() method that does not take any arguments (it throws a
          null pointer exception).
          I am attaching the classes discussed above.
          Cheers,
          Chris
          Torsten Friebe wrote:
          > Hi,
          >
          > does anybody know where to get a trail version - if one exists - of IN-Q-MY
          > application server or the resource adapter?
          >
          > Thanks, regards
          > Torsten
          >
          > "Xavi" <[email protected]> schrieb im Newsbeitrag
          > news:[email protected]...
          >
          >>Hi everybody,
          >>
          >>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
          >>
          > server
          >
          >>?
          >>
          >>It works well with INQMY server, but with BEA I'm getting a lot of
          >>
          > problems creating
          >
          >>the connections.
          >>
          >>Thanks in advance.
          >>Xavi.
          >>
          >>
          >
          >
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.cci.Connection;
          import javax.resource.cci.ConnectionSpec;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          import com.inqmy.r3adapter.R3ConnectionSpec;
          import com.inqmy.r3adapter.R3ManagedConnectionFactory;
          * Extends the In-Q-My implementation to allow for getConnection() with no
          * connection spec, i.e. use the default configured connection parameters.
          public class R3ConnectionFactory
          extends com.inqmy.r3adapter.R3ConnectionFactory
          implements com.bea.connector.IProxyMarker {
          private R3ConnectionSpec m_cspec;
          public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
          throws ResourceException {
          super(cm, mcf);
          String strClientNumber = mcf.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
          String strLanguage = mcf.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
          String strUserName = mcf.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
          String strPassword = mcf.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
          m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
          public Connection getConnection(ConnectionSpec connectionSpec)
          throws ResourceException {
          if (connectionSpec == null) connectionSpec = m_cspec;
          return super.getConnection(connectionSpec);
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          * Extends the In-Q-My implementation to over-ride the
          * allocateConnection method to return a CCI connection vs. a ManagedConnection
          public class R3DefaultConnectionManager
          implements ConnectionManager, Serializable {
          public R3DefaultConnectionManager() {}
          public Object
          allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
          throws ResourceException {
          ManagedConnection mc = mcf.createManagedConnection(null, cri);
          return mc.getConnection(null, cri);
          package wli.adapter.inqmy.sapr3.spi;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.security.auth.Subject;
          * Extends the In-Q-My implementation to get around some problems encountered
          * while running on WebLogic:
          * <ul>
          * <li>Must over-ride default implementation of equals and hashCode method</li>
          * <li>Needed to provide my version of the CCI ConnectionFactory</li>
          * <li>Needed to provide my version of the default ConnectionManager for the
          * non-managed scenario use case</li>
          * </ul>
          public class R3ManagedConnectionFactory
          extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
          private int m_iHashCode;
          transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
          public R3ManagedConnectionFactory() {
          super();
          java.rmi.server.UID uid = new java.rmi.server.UID();
          m_iHashCode = uid.hashCode();
          public Object createConnectionFactory() {
          // need to install our own default connection manager because In-Q-My
          // version causes a ClassCastException in CCI ConnectionFactory
          // getConnection
          return createConnectionFactory(new R3DefaultConnectionManager());
          public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
          throws javax.resource.ResourceException {
          // need to check for null on the ConnectionRequestInfo object because the
          // In-Q-My R3ManagedConnection ctor does not check for null
          if (cri == null) cri = getDefaultConnectionRequestInfo();
          return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
          public Object createConnectionFactory(ConnectionManager connectionManager) {
          // need to supply a connection factory that can deal with getConnection
          // that does not take a ConnectionSpec
          try {
          return new R3ConnectionFactory(connectionManager, this);
          } catch (javax.resource.ResourceException re) {
          re.printStackTrace();
          throw new java.lang.IllegalStateException(re.getMessage());
          com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
          throws javax.resource.spi.IllegalStateException {
          if (t_cri == null) {
          String strClientNumber = this.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
          String strLanguage = this.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
          String strUserName = this.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
          String strPassword = this.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
          t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
          return t_cri;
          public boolean equals(Object obj) {
          if (obj == null) return false;
          if (obj == this) return true;
          if (!this.getClass().isInstance(obj)) return false;
          R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
          return compare(getClientNumber(), mcf.getClientNumber()) &&
          compare(getLanguage(), mcf.getLanguage()) &&
          compare(getUserName(), mcf.getUserName()) &&
          compare(getPassword(), mcf.getPassword()) &&
          compare(getServerName(), mcf.getServerName()) &&
          compare(getSystemNumber(), mcf.getSystemNumber());
          protected final boolean compare(final Object obj1, final Object obj2) {
          if (obj1 == obj2) return true;
          if (obj1 != null) {
          return obj1.equals(obj2);
          } else {
          if (obj2 == null) {
          return true;
          } else {
          return false;
          public int hashCode() { return m_iHashCode; }

Integrating WebLogic Server with CA SiteMinder Web Agent R6

Hi I have searched on the topic of integrating WebLogic Server with the CA SiteMinder Web Agent R6 to provide single sign on services, and have been unable to find anything. Does anyone have any experience with this that could provide some tips, or could direct me to some documentation?

It definitely can work. We have done the same thing in several installations. The question is "How secure does it need to be?" You will be using SM to do authentication. You will configure SSO to trust the SM header variable. If you really want to be secure you need to configure your boxes so that the http server on you SUSE box (for Portal) can only be accessed from the Reverse Proxy. If another machine can access it someone could spoof the header variable and log in as anyone they want.
Hope this is helpful.
Anton

Oracle SOA Suite 11.1.1.5 and weblogic server with OEPE

Hello
Where can I find the installers for Oracel SOA Suite 11.1.1.5 and corresponding supported weblogic server with OEPE.
I want to install this on Debian and on Oracle Solaris 10 both, so better to have generic installers.
Few months ago, i could find them (2 months ago), but not now anywhere, not even on edelievery.
Where does oracle store all older version installers?
Regards

Hi
Download wls1035_oepe111172 Generic Version from below link.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
Thanks,
--Vijay

Build and run Sun's PetStore1.3.1_02 application with BEA WebLogic Server 8.1.

build and run Sun's PetStore
1.3.1_02 application with BEA WebLogic Server 8.1.
5) In the same Command Prompt, compile PetStore using the commands:
cd c:\bea\user_projects\domains\petstore
setPetStoreEnv.cmd
cd c:\petstore1.3.1_02\src
ant
buildfile:build.xml does not exist!
build failed
could you tell me how ?
thank you

What we, BEA, provides is a patch to allow you to compile Pet Store for
WebLogic Server. It does not contain the source code.
Sun's Pet Store source code can be found at
http://developer.java.sun.com/developer/releases/petstore/petstore1_3_1_02.h
tml. See the requirements section of README.TXT
You need both in order to make it work.
"Ankur" <[email protected]> wrote in message
news:3fa9f2d9$[email protected]..
Hi Nick,
I tried building the petstore1.3.1_02 application following theinstructions in the readme. But I got an error as the buil.xml file is
missing in the directory.....\petstore1.3.1_02\src.
>
I tried unzipping the downloaded again and for a petstore.domain.jar alongwith the readme. This jar does not contain the build.xml file.
>
Then I tried compiling one by one the component folder and found that the../xmldocuments/src folder has only a build.xml file but no source file...
>
Kinldy suggest what to do? Can you send me the zip via email?
P.S: I have checked the zip and the files are missing.

Trouble defining BAM Enterprise Message Source for BEA WebLogic Server

Hi all,
I've just started to play a little with Oracle BAM Architect.
I've WLS 10.0 and Oracle BAM Architect 10g release 3.
On Oracle BAM Architect I've defined an Enterprise Message Source for BEA WebLogic Server as follows:
Name: ALSBSource
Owner: ...
Type: BEA WebLogic Server
Initial context factory: weblogic.jndi.WLInitialContextFactory
JNDI Service Provider URL: t3://mypc:7001
TopicConnectionFactory name: com.myConnectionFactory
Topic name: com.myBAMTopic
JMS message type: TextMessage
Durable subscriber name: BAMSubscriber
Client ID: BAMSubscriber
Name | Flow name | Type | Max size | Formatting
content | BAM | String | 1024 | (none)
On WLS 10.0 I've defined the required JMS stuff.
On Oracle Design Studio I've defined a plan that includes:
- an Oracle BAM Enterprise Message Receiver from which I've selected the above 'ALSBSource' Enterprise Message Source
- a simple Grid
I've connected the BAM Enterprise Message Receiver to the Grid and clicked on 'Update' button.
When I try to publish a message on 'com.myBAMTopic' I don't see anything on the grid defined in the Oracle Design Studio.
The first question is about the definition of an Enterprise Message Source for BEA WebLogic Server in the Oracle BAM Architect.
I did not change the Oracle BAM Architect classpath or Oracle Design Studio classpath adding the weblogic.jar, because no error has been raised during the configuration of the message source and the plan. Should I update Oracle classpath with the weblogic.jar ?
Did I forget any other step ?
I thank you in advance for any feedback.
Regards
ferp

ferp - I got this to work with
JNDI Service Provider URL: http://localhost
When I add the port
JNDI Service Provider URL: http://localhost:23891
I cannot get my EMS to start.
Hopefully this should fix your issue.
Sudeep.

Is there any way to start weblogic server with java 7?

Hi. Is there any way to start weblogic server with jdk 1.7?

Hi,
You can start your Weblogic Server with java 7(JDK 1.7)
Go to Domain_home/bin and click on StartWeblogic.cmd it will start your Admin Server
It depends on which JDK you have used while creating domain if you have selected Jdk 1.7 it will use the same to start the server
See the Ex:
================
starting weblogic with Java version:
java version "1.7.0_51"
Java(TM) SE Runtime Environment (build 1.7.0_51-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.51-b03, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK17~1.0_5\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Dweblogic.Name=AdminServer -
Djava.security.policy=H:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy
-Xverify:none -Xverify:none -da -Dplatform.home=H:\Oracle\MIDDLE~1\WLSERV~1.3 -
Dwls.home=H:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=H:\Oracle\MIDDLE~
1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -
Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=H:\Oracle\MIDDLE
~1\patch_wls1036\profiles\default\sysext_manifest_classpath weblogic.Server
<Mar 3, 2015 1:08:32 PM PST> <Info> <Security> <BEA-090905> <Disabling CryptoJ J
CE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Mar 3, 2015 1:08:33 PM PST> <Info> <Security> <BEA-090906> <Changing the defaul
t Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Mar 3, 2015 1:08:33 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) 64-Bit Server VM Version 24.51-b03 from Oracle
Corporation>
=======================================
If you are using a Lower version of JDK and want to upgrade to JKD 1.7 you can do so by changing setDomainEnv.sh in Weblogic
Have a look at the below link to do so
The Weblogic Wasp: change java version / JDK of a weblogic domain
http://www.baigzeeshan.com/2012/05/how-to-change-jdk-used-by-weblogic.html
Hope it helps

Integrating BEA weblogic server with Oracle Advanced Queue

Similar Messages

Maybe you are looking for