Integrating Style sheet in WD abap

Hi,
  I need to integrate Style sheet in WDA,the style sheet holds all the data and format of displaying,is it possible to directly call style sheet in view...
Thanks
Chinna

The only way to manipulate the stylesheets used by Web Dynpro is to use Portal Themeing.  If you run you application within the portal it will automatically take on what portal theme has been customized.  If you run your application standalone then you must use the standalone theme editor to create a custom theme and run it via URL parameter.  This approach is not officially supported by SAP but there are documents on SCN that describe the process.

Similar Messages

  • Adjusted Style Sheet in portal

    I have read Note
    1059450 - Unified Rendering corrections (SAP_BASIS 700 SP13-Pre1)
    and wonder what actually the Adjusted Style Sheet is.
    Quote message from Note:
    Summary
    Symptom
    Unified rendering for Web Dynpro ABAP needs to be updated for error corrections.
    Other terms
    Solution
    The attached correction instructions contain the preliminary version of the Unified Rendering Support Package 13 for Web Dynpro ABAP.
    This corresponds to change list 101761.
    If you use the SAP Enterprise Portals, you must bear in mind the following:
    If you use Web Dynpro applications in a SAP Enterprise Portal with adjusted style sheet, the portal must have Version 7.0 Support Package 13 or higher.
    Could someone please advise?
    Thank you

    Hi Doug,
    don't know if I understand you correctly. If you want to use another stylesheet from another application server within your web dynpro which is integrated in portal you can overrule the portal style in the following way.
    -> Open the iView parameters (show all parameters) where you have integrated your web dynpro and where you want to change the stylesheet
    -> Go under "Application Parameters" and add the following url example as followed:
    sap-cssurl=<System.Access.WAS.protocol>://<System.Access.WAS.hostname>/webdynpro/resources/sap.com/tcwddispwda/global/ssr/themes/portal/ap_aponline/ur/ur.ie6.css
    In lower release (EP6 on WAS 6.20) you also must change "Hand over Portal Stylesheet" to No. In upper releases, this one is not existing anymore
    Hope that helps,
    Regards,
    Frank

  • How to apply style sheet (.css) in Weblogic directory listing

    Hi,
    We are migrating a directory listing application from Apache to Weblogic.
    Earlier we did this by Apache httpd.conf entry like below :
    <Directory "/opt/apache/httpd-2.1.9/htdocs/Myreportfolder">
    IndexOptions FancyIndexing FoldersFirst NameWidth=* XHTML
    IndexOrderDefault Descending Date
    IndexStyleSheet "/css/style.css"
    </Directory>
    /opt/apache/httpd-2.1.9/htdocs folder has all it's usual resource files.
    We were able to see documents in "Myreportfolder".
    Now we have moved to Weblogic and using virtual directory mapping as below and we are trying to achieve the same thing:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <wls:weblogic-web-app xmlns:wls="http://www.bea.com/ns/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://www.bea.com/ns/weblogic/weblogic-web-app http://www.bea.com/ns/weblogic/weblogic-web-app/1.0/weblogic-web-app.xsd">
    - <wls:container-descriptor>
    <wls:index-directory-enabled>true</wls:index-directory-enabled>
    <wls:index-directory-sort-by>LAST_MODIFIED</wls:index-directory-sort-by>
    </wls:container-descriptor>
    - <wls:virtual-directory-mapping>
    <wls:local-path>/Myreportfolder</wls:local-path>
    <wls:url-pattern>/*</wls:url-pattern>
    </wls:virtual-directory-mapping>
    <wls:context-root>/getreports</wls:context-root>
    </wls:weblogic-web-app>
    We are able to view the reports but we do not get look-and-feel of Apache like directory listing.
    but we encounter below issues:
    1) File/Folder icons are not visible - we want to use style sheets in http header from the response that is returned from weblogic server
    2) Filename is limited to 29 characters when it is showing
    3) Files are not sortable as Descending order - we sorted using tag <wls:index-directory-sort-by>LAST_MODIFIED</wls:index-directory-sort-by> but the latest file is shown at the last
    We are thinking that Weblogic must be having some configuration like Apache httpd.conf where we can apply style sheets (css ).
    We would appreciate af anyone can provide better insight into the issue.
    or is it possible to extend weblogic.servlet.fileservlet class to serve this purpose.
    Thanks & regards,
    Rabi

    Hi Vikash,
    Check the below links which will you idea on the same.
    Stylesheet for WDA without integrating in SAP Portal
    Apply custom css to WebDynpro application
    Thanks
    KH

  • XML style sheet error at Validate step in FDM for few locations

    Hi All,
    Users are facing the "XML page cannot be displayed - The style sheet doesnot contain a document element. The style sheet may be empty, or it may not be weel-formed XML document.." for very fre locations while validating the data.
    Please advise as it is most annoying thing for users.
    Thanks and Regards

    You will need to check a few things:
    a) Check that the Integration Option in the HFM Adapter "FDM WEB SERVER NAME" matches the value that the users are using to access FDM.
    http://<fdmwebservername>/HyperionFDM
    Make sure that the server host name is entered into this option.
    b) Check that the XML file type on the users workstation is configured to open with Internet Explorer and not the XML Editor.  You can do this by creating a text document named test.xml and right-clicking on it and choose "properties" and update the program to open the file to Internet Explorer and save.
    c) Make sure that the FDM Web Site is in the users trusted sites in the IE Browser
    d) Make sure that the "Automatically prompt for file downloads" and "Automatically Prompt for Active-X Controls" options are set to Enabled in the IE Settings.

  • How to apply style sheet to design page

    hi all,
    i have a discussion,
    how to apply a style sheet to design page in webdynpro.
    thanks
    vikash

    Hi Vikash,
    Check the below links which will you idea on the same.
    Stylesheet for WDA without integrating in SAP Portal
    Apply custom css to WebDynpro application
    Thanks
    KH

  • Numbered List and Bulleted List w/ Custom Style Sheet

    Hi,
    I am a new user to RoboHelp 7, and must say I find it useful
    but also painful to use. Currently I’m trying to solve
    something that feels like a bug in RoboHelp 7, but before I give in
    and accept defeat I wanted to check with the forum.
    I have FrameMaker 8, and import the files to RH where I use
    them to create WebHelp projects.
    Here’s a short procedure:
    1. I Import my files with a predefined style sheet matching
    the FM styles.
    2. I also check the Convert to HTML list option and set all
    numbering and bullet styles to User defined.
    - After import RH does the usual thing and creates a bunch
    of style sheets on its own
    3. I select all the files from the Topic List pod and apply a
    new custom style sheet. This enables me to have one style sheet for
    all the HTML files with the right layout and formatting
    4. I generate the output, and RH uses the new style sheet
    reference
    The resulting HTML files shows that the output is not the
    same as the generated HTML shown in RH’s HTML editor view
    - Editor view: <li class=”style”>
    - Browser view: <li>
    6. If I make a change (e.g. add a space) and save the HTML
    file, and generate the project again the HTML is correct in the
    browser
    One could argue that it’s not a big problem; however,
    with a large project this is starting to look more like a nightmare
    Does anyone know of this problem, and if so can it be fixed?
    Kind regards,
    Jon

    Is this the time when I get really angry at Adobe for creating the worst FrameMaker/RoboHelp integration ever? No! However, I must admit that I'm amazed that they are unable to solve an important feature as conversion of lists from a FrameMaker document to a RoboHelp WebHelp project. When I say conversion I mean a clean conversion with minimal interference from RoboHelp that allows me to use CSS to its full extent.
    Here's the problem, and this was also the problem with RoboHelp 7 and FrameMaker 8. BTW, I use standalone versions (not TCS 1 or 2).
    Figures: First image depicts FrameMaker 9's Paragraph Designer and the Autonumber format for a paragraph named VizNumbered. Second image depicts the RoboHelp 8's conversion setting.
    FrameMaker uses Autonumbering in front of paragraphs to create lists. This means that you in RoboHelp need to manage two formats, the autonumber and the paragraph style.
    RoboHelp does of course not (by default) use Autonumbering in front of paragraphs because a RoboHelp WebHelp project is HTML based, and list tags in HTML can perfectly handle any formatting of text etc.
    RoboHelp will convert, when "Convert Autonumber to HTML List" is selected, the Autonumber in FrameMaker to a list tag (LI). By default this will generate a list with a lot of margin, font and other CSS properties that tries to simulate the way the list is laid out in the FrameMaker document. In addition to the list tags it will convert the FrameMaker paragraph to a P tag which it inserts within a list tag. The issue you will experience with this is that indentations with the paragraph tag does not align properly between line 1 and 2. At the same time the WebHelp project will not look the same in IE, Firefox or Chrome. That is, Chrome and Firefox will look the same, and IE different. IE has the WYSIWYG feel, but it does not comply well with W3C standards (i.e. using P tags enclosed by LI tags is not a good idea ...).
    Selecting "Convert Autonumber to RoboHelp List" does something similar, but is not recommended at all!
    So, here's the big question. How can I make sure RoboHelp understands that I ONLY need to define a list tag with a CSS class attribute attached to it?
    Today I basically only get the following:
    <li><p class=""></p></li> or,
    <p class=""></p>
    What I want is the following:
    <li class=""></li>
    Can this be solved with today's versions, can anyone help me, or do I have to wait for the Adobe development team to realize this and to fix it?

  • Java.io.FileNotFoundException: Unable to locate style sheet "oracle/webcent

    Hi
    I have created a webceter application in jdeveloper 11.1.1.4 with the default page templates and pages.
    After creating the application i followed the below steps
    1. Created a new skin file test-skin.css under webcontent/oracle/webcenter/portalapp/skins
    2. Created a trinidad-skins.xml under WEB-INF and configured it as below
    <?xml version="1.0" encoding="windows-1252" ?>
    <skins xmlns="http://myfaces.apache.org/trinidad/skin">
    <skin>
    <id>testskin</id>
    <family>testskin</family>
    <version>
    <name>v1</name>
    <default>true</default>
    </version>
    <render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
    <style-sheet-name>oracle/webcenter/portalapp/skins/test-skin.css</style-sheet-name>
    </skin>
    </skins>
    3. Made entry in the trinidad-config.xml as
    <?xml version="1.0" encoding="windows-1252"?>
    <trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
    <skin-family>testskin</skin-family>
    </trinidad-config>
    4. Ran the portal but got error on the console as below
    <StyleSheetEntry> <_getNameResolver> Could not load style sheet: oracle/webcenter/portalapp/skins/test-skin.css
    <StyleSheetEntry> <_getNameResolver>
    java.io.FileNotFoundException: Unable to locate style sheet "oracle/webcenter/portalapp/skins/test-skin.css" in local styles directory (C:\Users\197944 \AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\servers\DefaultServer\tmp\_WL_user\TestSkin_V2.0\7x71m9\public\adf\styles), or on the class path.
    Please be sure that this style sheet is installed.
         at org.apache.myfaces.trinidadinternal.skin.StyleSheetEntry._getNameResolverForStyleSheetFile(StyleSheetEntry.java:439)
         at org.apache.myfaces.trinidadinternal.skin.StyleSheetEntry._getNameResolver(StyleSheetEntry.java:347)
         at org.apache.myfaces.trinidadinternal.skin.StyleSheetEntry.createEntry(StyleSheetEntry.java:78)
         at org.apache.myfaces.trinidadinternal.skin.SkinImpl._createStyleSheetDocument(SkinImpl.java:563)
         at org.apache.myfaces.trinidadinternal.skin.SkinImpl.getStyleSheetDocument(SkinImpl.java:346)
         at org.apache.myfaces.trinidadinternal.skin.SkinExtension.getStyleSheetDocument(SkinExtension.java:527)
         at org.apache.myfaces.trinidadinternal.skin.SkinStyleProvider.createStyleSheetDocument(SkinStyleProvider.java:158)
         at org.apache.myfaces.trinidadinternal.style.cache.FileSystemStyleCache._getStyleSheetDocument(FileSystemStyleCache.java:649)
         at org.apache.myfaces.trinidadinternal.style.cache.FileSystemStyleCache._getEntry(FileSystemStyleCache.java:424)
         at org.apache.myfaces.trinidadinternal.style.cache.FileSystemStyleCache.getStyleSheetURIs(FileSystemStyleCache.java:178)
         at org.apache.myfaces.trinidadinternal.renderkit.core.xhtml.StyleSheetRenderer.encodeAll(StyleSheetRenderer.java:97)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
         at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer._renderSkinStylesheet(DocumentRenderer.java:1999)
         at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:885)
         at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
         at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
         at javax.faces.component.UIComponent.encodeAll(UIComponent.java:933)
         at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:266)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:197)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
         at oracle.webcenter.portalframework.sitestructure.handler.CustomViewHandler.renderView(CustomViewHandler.java:279)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:777)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:293)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:213)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    I also tried creating portal resource for the skin by right clicking on the skin file, but i still get the same error.
    If i create a skin file under anyother folder directly under the webcontent say /css/test-skin.css it works file.
    Am i doing something wrong or missing any entries?Help is appreciated.
    Thanks

    By default, trinidad-config picks up the skin setup through the preference bean - "#{preferenceBean.defaultTrinidadSkin}". The default skin can be setup through adf-config.xml at design time (look for <portal:preference id="oracle.webcenter.portalapp.skin") or using the Administration console at run-time. The value used here is whatever you've configured as "Skin Family" when creating the portal resource.
    Of course, you can edit the trinidad-config to hard-code the skin as well using the same "Skin Family" from the Create Portal Resource dialog.

  • Create style sheet in Web Application Designer

    Hi all,
    I need to change the color from light-blue into green for text field "Last data refresh" in Advanced Web Items "Info Field Item".
    I have an idea this should be fixed by style sheet integration - but could anyone please contribute how I managed this practical?
    XHTML code for Info_Field_ITem is as mentioned:
                               <td >
                                <bi:INFO_FIELD_ITEM name="INFO_FIELD_ITEM_1" designheight="300" designwidth="300" >
                                    <bi:DATA_PROVIDER_REF value="DP_1" />
                                    <bi:WITH_TRAY type="CHOICE" value="" />
                                    <bi:INFORMATION_ELEMENT_LIST type="ORDEREDLIST" >
                                        <bi:INFORMATION_TYPE type="CHOICE" index="1" value="GENERIC_TEXT_ELEMENT" >
                                            <bi:GENERIC_TEXT_ELEMENT value="ROLLUPTIME" />
                                        </bi:INFORMATION_TYPE>
                                    </bi:INFORMATION_ELEMENT_LIST>
                                </bi:INFO_FIELD_ITEM>
                            </td>
    Many thanks in advance
    KR. Thorsten

    Hello Thorsten,
    a little bit late but ...
    Just try to use HTML commands like this.
        <td >
    <font color="green">
                                <bi:INFO_FIELD_ITEM name="INFO_FIELD_ITEM_1" designheight="300" designwidth="300" >
                                    <bi:DATA_PROVIDER_REF value="DP_1" />
                                    <bi:WITH_TRAY type="CHOICE" value="" />
                                    <bi:INFORMATION_ELEMENT_LIST type="ORDEREDLIST" >
                                        <bi:INFORMATION_TYPE type="CHOICE" index="1" value="GENERIC_TEXT_ELEMENT" >
                                            <bi:GENERIC_TEXT_ELEMENT value="ROLLUPTIME" />
                                        </bi:INFORMATION_TYPE>
                                    </bi:INFORMATION_ELEMENT_LIST>
                                </bi:INFO_FIELD_ITEM>
    </font
                            </td>
    It worked for me in WAD to change the fond and everything. Also the portal did not change the colors with its theme.
    best regards,
    Martin

  • XML Style sheet

    Does anyone know how to create xml style sheet from oracle report. Or is it possible thru the tool ?
    Please let me know.
    Thanks
    Rakesh

    You will need to check a few things:
    a) Check that the Integration Option in the HFM Adapter "FDM WEB SERVER NAME" matches the value that the users are using to access FDM.
    http://<fdmwebservername>/HyperionFDM
    Make sure that the server host name is entered into this option.
    b) Check that the XML file type on the users workstation is configured to open with Internet Explorer and not the XML Editor.  You can do this by creating a text document named test.xml and right-clicking on it and choose "properties" and update the program to open the file to Internet Explorer and save.
    c) Make sure that the FDM Web Site is in the users trusted sites in the IE Browser
    d) Make sure that the "Automatically prompt for file downloads" and "Automatically Prompt for Active-X Controls" options are set to Enabled in the IE Settings.

  • I am forced to hold shift and refresh the page on 99% of the sites I visit. How do I fix this from happening? If I don't the pages are missing style sheets and etc.

    When ever I go to sites they half load or are missing style sheets. If I view the source for the page and click on a style sheet link I get the following error:
    Content Encoding Error
    The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.
    If I hold shift and refresh the page loads as normal.
    It's happening on 99% of the sites I visit. I have disabled my plugins and add-ons.
    I do have some add-ons or plugins that I would like to remove completely but there is no uninstall or remove option, neither in regular or safe mode.

    '''I'm NOT buying a backup Computer till, Firefox will Run on Windows 8 !'''

  • Problems with a style sheet in InDesign CS3

    Hello everyone. I was wondering if anyone had any clue as to what the holy heck is happening to me.
    I am attempting to standardize our documents and use style sheets--hey, what a concept, right? So I'm going through a recently completed document and grabbing text and using that to create paragraph style sheets and character based style sheets.
    With one paragraph style sheet, the text is set to Janson Text Lt Stnd 55 Roman. However, when you apply the style sheet to a paragraph, the first word sets to a missing font. The rest of the paragraph is OK. It's only the first word. The paragraph style sheet does not have a "+" next to it. Highlighting the individual word and reapplying the paragraph style sheet does not change this.
    I went to the character style palette, thinking that there was an override. Nope, the character style was set to "None." I clicked on "Override" to apply the paragraph style, and again, the first word is stubbornly refusing to change.
    What gives? I am stumped!
    Best,
    Chryss

    Styles based on Basic paragraph are a nightmare because every document starts with a basic paragraph style, and there's no guarantee that it will be the same from document to document. When you import styles based on Basic Paragraph from some other document, different attributes will be overridden depending on what is the same, and what is different.
    The best way to deal with this is to either import the basic paragraph stle along with everything else, or put all the docs in one book file and pick one to use as the master, then synchronize the styles.
    It sounds like your first word problem could be an applied character style, though, or less likely, a nested style.
    Peter

  • Is it possible to change the color of a layer of a Customs CSS from an External Style sheet?

    Hi,
    I have sucessfully link External .css  file to my HTML page and able to change the font size of the headlines and the paragraph.
    What I am not able to do is to ADD the color my Custom CSS from the External sheet.  I have difined the color attribute as a 'Advance'
    and gave it the same name "#bigwraper" that is has in my HTML file.
    Attached is the color outline of my 'Blank Layout' with colors?
    Thank you.
    Dreamer101.1

    Hi Murray,
    I am building a web site on which the entire content would be changed at least daily. The website would have similar design to www.Helium.com
    The page will have CCS layout boxes in which different content would  be pasted.
    To re-phrase my question:  I want to know how to change the color of a layer from an external style sheet?
    Because my home page 'Sidebar' and colors would be the same for all page, only the content of different pages would be different.  If I want to change a color of my web side pages, I need to learn how to do it in one spot through an External Style Sheet.
    I am amble to link my external style sheet and to change H1 tag and to give it different colors. But I was not sucess with change the color of a layer on which my content sits around.
    I took out the color from my HTML page and gave the same name to the layer in my External Style Sheet with the same color.
    Hope my question and the reason I was able to clarify.
    cheers,
    Dreamer101.1

  • Generate report from database using .xsl style sheet

    I am trying to view test result histories for specific uut serial numbers.
    We are logging all test data to the default access database template that was provided with Teststand.
    Is there a method of generating reports from the database that match the format of those generated at runtime?
    I was surprised to find that the default access database did not contain any gui or pre-made reports matching the xsl style sheets chosen in the report options dialog.
    My database skills are weak, I am able to browse the raw data and I see the relationships between some of the tables, but the prospect of recreating one of the xml report formats in access seems daunting. Am I missing something? what is the best way to print a uut report from test data stored in access?

    Hello msears,
    Thank you for posting on the NI Discussion Forums.  Unfortunately there are no tools available in TestStand for directly converting an Access database to a formatted .xsl report.  It is possible to have a step in a sequence that reads the information from the database, and create the .xsl report as if it had been generated at sequence run-time, by writing those values directly to Locals.ResultList.  Admittedly, this would require some knowledge of Microsoft Access, and the ability to write a program that will extract information from the database, in order to include it as a step in the sequence.
    Is there anything stopping you from creating a formatted .xsl report when the sequence is run (instead of trying to create it from previous data stored in an Access database)?
    Chris_G
    Sr Test Engineer
    Medtronic, Inc.

  • XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
    ''If it displays in Firefox:''
    It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
    ''If it displays in IE or embedded in another Microsoft application:''
    In a web search I found these suggestions:
    (1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
    (2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
    Any luck?

  • Can I add the same style sheet to multiple nodes in the same scene?

    I know this sounds like a dumb question, so I'll give an explanation below.  I've done this with FXML and Scene Builder and haven't noticed any negative effects yet.  I'm mostly curious what happens internally when I add a style sheet to a node and that same style sheet has already been added via a parent node.
    The reason I ask is because I use fx:include in many of my FXML files.  For example, I'll have something like this:
    MainPane.fxml - Uses shared.css and main-pane.css.  Includes SubPane.fxml.
    SubPane.fxml - Uses shared.css and sub-pane.css.  Included in MainPane.fxml using fx:include.
    I used to add shared.css to SubPane.fxml using Scene Builder's preview option, but the way this works has been changed in Scene Builder 2.  See this thread for an explanation of the change.  I also use TestFX and I'm convinced that I should be ensuring shared.css is applied to SubPane.fxml before running GUI tests.
    The easiest way to accomplish what I want is to add shared.css to the root node of both MainPane.fxml and SubPane.fxml.  However, I don't know if that's something I'm allowed to do.  Is it?

    No. http://www.adobe.com/products/creativecloud/faq.html
    Can I buy more than one membership to an individual offering of Creative Cloud? 
    No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

Maybe you are looking for

  • IPod Classic 80 songs stay grey in iTunes after synching

    After my computer bluescreened, I started up iTunes and iPod again, but everything had gone, including all my playlists. I re-loaded iTunes from my back-ups and wanted to re-load my iPod from there. As synching seemed the quickest way, I chose that (

  • Problem creating Web Service with Wizard

    Hi, I have problems in generating a WebService based on my EJB using the Wizard integrated in SAP Dev. Studio (right click on "ejb-jar.xml" -> New -> Web Service in the J2EE DC Explorer) In the method selecting screen the methods of my Bean are shown

  • ValidationTextField in IE6 IE7 problem...

    hi agian, as explained in my previus post regarding the "ValidationTextField problem" if i set the textfield values by javascript, the same problem occurs in IE 6 and IE 7 if you click on the RESET button and then make changes in the textfield (Title

  • MDD DP G4 elusive diagnosis - freezes during boot up.  Tired- HELP!

    After not using my Dual Bootable  DP 1.25 GHz MDD G4 for a couple of months, it's now freezing during the boot process. What's weird is that it boots in Target Mode just fine, and when connected in this mode to my G5 Quad, it actually boots the G5 Qu

  • Mac won't stayed bound to AD - System Log info included

    I have a couple of Macs that continue to somehow un-bind themselves from our AD network. It seems to happen when the machine is booted or wakes from the screensaver. When it happens, I re-bind the machine to AD and users can log in just fine until so