Integrating SWF built using SDK 4.1 into application built using SDK 4.5

Did anyone integrate SWF built using Flex sdk 4.1 into SWF built using Flex SDK 4.5 using SWFLoader?
I am facing some issues while doing so. Can someone please point me to the right direction.

See past threads or my blog about the ”Marshall Plan”
Alex Harui
Flex SDK Team
Adobe Systems, Inc.
http://blogs.adobe.com/aharui

Similar Messages

Firefox won't download in my brand-new iMac Mountain Lion. The icon never appears on my desktop so I can't move it into applications and use it. What's wrong?

I've clicked the "Download" link several times and the only thing that apparently happens is a little blue blip zipping toward the upper right corner of the screen. The icon to move into "Applications" never appears.

Make sure that Firefox gets installed properly.
Open the Firefox disk image (DMG) file and drag the Firefox program to the application folder on your hard drive.
You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
*http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X

Use of DSC causes other applications that use SQL: to fail to run.

The use of Labview DSC seems to cause programs that use other vendor's SQL support to lock up and die. My current choice had been to run msconfig to disable loading any labview support upon startup. This allows me to use other applications such as PageManager. However oncde I run Labview I must again reboot to gain access to the other applications.
I thought all SQL and Database drivers were downwards compatible.

Hi,
maybe you should write your question to the NI LV DSC forum directly. It's
not so crowded and suits well for bug reports. I'd suggest to add this to
the discussion "What issues have you run into when upgrading to LabVIEW 7
Express?" ( http://tinyurl.com/xc1c ) even.
Sometimes I've the impression NI needs more pressure of the users for LV
DSC...
"reverse o" schrieb im Newsbeitrag
news:[email protected]..
> The use of Labview DSC seems to cause programs that use other vendor's
> SQL support to lock up and die. My current choice had been to run
> msconfig to disable loading any labview support upon startup. This
> allows me to use other applications such as PageManager. However oncde
> I run Labview I m
ust again reboot to gain access to the other
> applications.
>
> I thought all SQL and Database drivers were downwards compatible.

Using ActiveX controls in GUI application, which uses TestStand API

When using ActiveX controls in TestStand Operator Interface GUI,
CVI reports User Interface Library error no.-143:
"ActiveX control Error" on attempt to load panel, which contains ActiveX controls.
The same code, which takes care of user interface, but not references
TestStand ActiveX API (i.e. not creates TS Engine), works properly.
What's wrong?

Hello again Misha,
Sorry about my previous answer, I overlooked the fact that you were saying this error was caused by placing ActiveX controls in your Operator Interface (OI) GUI (as my example shows I thought the problem was with GUIs displayed from step code modules).
Nevertheless, the problem is still being caused by the same issue, and is solved in a similar fashion. The source for the CVI OI initializes the TestStand engine before it loads/displays the UI panels. The calls to initialize the engine seem to be CoInitializing the main GUI thread as multithreaded apartment (MTA) mode whereas you will need it to be single threaded apartment (STA) mode in order for the ActiveX control container to work properly. The TestStand engine is compatible with either modes, but only one can be in place at a given time. If we CoInitialize the OI's main GUI thread as STA this will solve the problem (the subsequent attempts of setting it to MTA will fail, but again this is ok since the engine is compatible with STA).
In order to perform this functionality you will need to put a call to CoInitializeEx in the main function of the CVI OI source (this will also require that you #include the "windows.h" file at the top of the source also). Here is what the main function in your main.c file for the CVI OI will look like once you have done this:
int main(int argc, char **argv)
int retval = -1;
sArgc = argc;
sArgv = argv;
if(InitCVIRTE(0, argv, 0) == 0) /* Initialize CVI libraries */
goto Done; /* out of memory */
// Intialize main GUI thread as STA to prevent other attempt to make it
// MTA, which will not allow ActiveX controls to be used.
CoInitializeEx(NULL, COINIT_APARTMENTTHREADED);
/* initialize the test engine */
if(!InitEngine())
goto Done;
if(!InitErrorDialogStrings())
goto Done;
if(!InStandaloneExecutable() && !DisplayRunningInEnvironmentWarning())
goto Done; // get out now
if(!ProcessPreLoginCmdlineArgs())
goto Done;
if(!CfgFile_Load())
goto Done;
if(!CfgFile_RestoreOptionSettings())
goto Done;
if(LoadGUIPanels() < 0)
goto Done;
if(!InitFileQuickList())
goto Done;
/* set initial gui state */
if(!InitGUI())
goto Done;
RunUserInterface();
retval = 0; /* normal exist status */
Done:
/* cleanup */
SeqFileList_DeleteAllSequenceFileRecords();
ExeList_DeleteAllRecords();
IconList_DeleteIconList();
SaveAndCleanupFileQuickList();
CfgFile_SaveOptionSettings();
CfgFile_WriteAndCleanupForExit();
AdaptList_DeleteAdapterList();
DestroyToolMenus();
CloseEngine();
FreeErrorDialogStrings();
return retval;
Note: Remember to #include "windows.h" at the very top of the main.c file and to include ole32.lib in your project file list in order to link in the definition for CoInitializeEx.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Writing smartform output into application server.

Hi,
i have a smartform output having logo and other details. After this i am converting the smartform output to PDF file and i tried write into application server using Open Dataset, Close Dataset. The thing is i am unable to see the output in pdf file and when i tried to open am getting some error. Is there any way to write pdf file which having logo into application server.
i tried for both binary mode as well as for text mode of open dataset.
please guide me.

Hi Subas.
I would like to suggest a couple of references,
[SDN - Reference for Issue regarding the uploading the pdf file to the application server|regarding the uploading the pdf file to the application server;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Query on integrating windows file server into SAP KM using WEBDAV

hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh N

Hi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

Hi John,
I think the only way is to get an iMic...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

Problem while integrating windows file server into SAP KM using WEBDAV

Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
<b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol'.
                ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
                       Please check the SPN by calling 'setspn -l IDBSRV8'.
                       If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
                       Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
                       Right-click 'IDBSRV8' and choose 'Properties'.
                       Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
                       Select 'Use any authentication protocol' and choose 'Add'.
                       Select 'Users or Computers' and enter IDBSRV8 as object name.
                       Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
        Ganesh Natarajan

Hi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre

Enforcing integrity using oracle specific data base commands .v. using fron

Full subject : Enforcing integrity using oracle specific data base commands .v. using front end.
It ought to be generally accepted that it is better to enforce integrity directly in the data base using constraints, dependencies, triggers etc rather than leaving it to specific front end programmes.
In my view, the chief advantages - of enforcing integrity directly in the data base - are:
(1) No process can violate the integrity.
(2) Being server centric, these commands run on the server and so can be easily sized in one place.
(3) One time data migration (imports) into the system using Oracle tools or SQL commands would also need to conform to the integrity constraints. Thus an implementor would be assured that the basic data is alright.
I am faced with a situation where we are about to implement a new Oracle based package. During data migration, when we discovered that there are no integrity constraints built into the target data base, the package vendor asserted that it is not necessary to build in integrity into the database. This seems to be an extreme and risky view.
Further, it is argued by the package vendor that putting constraints directly in the data base would significantly increase the needed resources (RAM) on the server. In my view, this increase is trivial and anyway, hardware costs are crashing day by day.
In the absence of integrity checks in the data base, it seems to me that every program would have to extra zero value work to ensure integrity of the end user data. It will still never be complete.
I would like to know the pros and cons of implementing without integrity constraints.
OK.

AnanthaP wrote:
Full subject : Enforcing integrity using oracle specific data base commands .v. using front end.
It ought to be generally accepted that it is better to enforce integrity directly in the data base using constraints, dependencies, triggers etc rather than leaving it to specific front end programmes.
In my view, the chief advantages - of enforcing integrity directly in the data base - are:
(1) No process can violate the integrity.
(2) Being server centric, these commands run on the server and so can be easily sized in one place.
(3) One time data migration (imports) into the system using Oracle tools or SQL commands would also need to conform to the integrity constraints. Thus an implementor would be assured that the basic data is alright.
I am faced with a situation where we are about to implement a new Oracle based package. During data migration, when we discovered that there are no integrity constraints built into the target data base, the package vendor asserted that it is not necessary to build in integrity into the database. This seems to be an extreme and risky view.
Further, it is argued by the package vendor that putting constraints directly in the data base would significantly increase the needed resources (RAM) on the server. In my view, this increase is trivial and anyway, hardware costs are crashing day by day.
In the absence of integrity checks in the data base, it seems to me that every program would have to extra zero value work to ensure integrity of the end user data. It will still never be complete.
I would like to know the pros and cons of implementing without integrity constraints.
OK.It's a shame you seem to be so far into the process and committed to this vendor. I once had a vendor tell us his product would run on Oracle but they recommended MS SQL Server because "oracle can't handle more than 5 concurrent sessions." I made sure that vendor didn't make the short list.

Hi, We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
Pramod

Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards.

My swf doesn't work when inserted into my website

Hi I am trying to create a gallery on my website. The way I am doing it is I am making several swfs that consist of an image that you click on, it goes into full screen, click it again and it goes back, then importing them into dreamweaver. the as3 code I am using in Flash is
import flash.display.StageDisplayState;
function toggleFullScreen():void
if (stage.displayState == StageDisplayState.NORMAL) {
stage.displayState=StageDisplayState.FULL_SCREEN;
} else {
stage.displayState=StageDisplayState.NORMAL;
btn_fullsc.buttonMode = true;
btn_fullsc.addEventListener(MouseEvent.CLICK, buttonOnClick)
function buttonOnClick(event:MouseEvent):void
toggleFullScreen();
When I export and open just the swf, it works, but when imported into dreamweaver, then published it doesn't, it still shows the original image but when you click it nothing happens. What am I doing wrong? any help would be great.
PS
I am an idiot when it comes to computers. If you send me a different code that I'm supposed to use just give me the exact code that I can just copy and paste into flash

First, change this:
import flash.display.StageDisplayState;
function toggleFullScreen(e:Event):void
if (stage.displayState == StageDisplayState.NORMAL) {
stage.displayState=StageDisplayState.FULL_SCREEN;
} else {
stage.displayState=StageDisplayState.NORMAL;
btn_fullsc.buttonMode = true;
btn_fullsc.addEventListener(MouseEvent.CLICK, toggleFullScreen)
Make sure you have the following publishing option in your html-wrapper activated:
(File>Publishing Options>HTML-Wrapper>Template:Flash only - allow Fullscreen)

Using Eclipse project definitions to build the Flex SDK

It would be great if someone from Adobe could post on the recommended usage of the Eclipse project definitions in the development/eclipse/ subdirectory of the 3.0.x trunk distribution. I would like to debug some compiler modifications that I am working on.
I saw Peter Farland demo this setup at 360Flex, but was unable to capture all the details of the Eclipse configuration that he discussed in his talk.
thanks!

If you go to the framework project’s properties, there is a section called Flex Library Compiler, you want to use a specific flex sdk (add a new sdk which points to the trunk, and use that) — you are probably building /against/ the wrong sdk, right code, wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 12:56:01 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
  Using Eclipse project definitions to build the Flex SDK
Sorry, I'm not following. My SDK project is from the trunk.
Thanks,
Ben
On Thu, Apr 3, 2008 at 3:32 PM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
  Using Eclipse project definitions to build the Flex SDK
Try changing the sdk for the framework lib project to trunk (you'll need to add a new flex sdk, name it whatever you want) -- it's in the project properties. It's using the wrong compiler.
- Jono
From: Ben Clinkinbeard <[email protected]>
Reply-To: <[email protected]>
Date: Thu, 3 Apr 2008 05:13:43 -0700
To: <[email protected]>
Subject: Re: Using Eclipse project definitions to build the Flex SDK
A new message was posted by Ben Clinkinbeard in
Developers --
  Using Eclipse project definitions to build the Flex SDK
I am running FB on top of Eclipse 3.3.2.
<http://3.3.2.> <
<http://3.3.2.>
http://3.3.2.> I checked out the whole SDK trunk and can build the main ant task with no errors. I used the instructions mentioned above to create a Flex framework library project and thats where the error comes in. (I had tried to manually build a framework project a few times and it was a nightmare.) I would probably prefer to work on the 3.0.x branch/tag as I hope to submit a patch or two but saw Joe mention that the project defs only existed in the trunk.
Searching Google for the oem error turns up lots of links about projects that had assets deleted and the build got confused but following the instructions on how to fix proved unsuccessful.
Thanks,
Ben
On Thu, Apr 3, 2008 at 1:45 AM, Jono Spiro <[email protected]> wrote:
A new message was posted by Jono Spiro in
Developers --
  Using Eclipse project definitions to build the Flex SDK
I always forget what that error means when it comes up -- though it's been ages since I've seen it last, literally.
Joe: Since you mention Java 1.5, I'm guessing the errors are in the asdoc package? Those should be turned off (read: turned into a warning) -- Eclipse is a little too persnickety about that particular error. There's a preference for this in the Java section under warnings and errors. It's turned off in the trunk dev projects. Otherwise, you should be able to run the compiler directly with no problems (okay, one more caveat: there's a class loader issue with the OEM, fixed in trunk if you look for my Java 1.5 checkin).
Ben: What is your setup? What are you building (Ryan mentions trunk, Joe mentions 30x), which Eclipse, which dev projects, did you build the sdk from the commandline first, etc.?
Cheers,
Jono
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
http://www.adobeforums.com/webx?13@@.59b4a9d4/3>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK <
<http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
http://www.adobeforums.com/webx?13@@.59b4a9d4/5>
Replies by email are OK.
Use the unsubscribe <
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3>
http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> > form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/6>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4%21folder=.3c060fa3> form to cancel your email subscription.
View/reply at Using Eclipse project definitions to build the Flex SDK
<http://www.adobeforums.com/webx?13@@.59b4a9d4/7>
Replies by email are OK.
Use the unsubscribe
<http://www.adobeforums.com/webx?280@@.59b4a9d4!folder=.3c060fa3> form to cancel your email subscription.

Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router

Very much appreciate any help getting streaming video feed from web server built into video application to work properly using port forwarding on my Linksys WRT54g wireless router.
Here is the situation:
My PC is connected to the internet via a Linksys WRT54g wireless router.
The Windows XP Pro SP2 firewall is enabled, with a firewall exception established for the video camera application.
On the router, forwarding of port 80 is enabled for the LAN IP address of the PC running the video application with an embedded web server, and the web server in the video camera application is also set to use port 80.
I have a free DYNDNS account and also run the DYNDNS updater program on the PC running the video application with embedded web server. According to the DYNDNS web site and the DYNDNS updater program, the IP address assigned to the machine running the video application with embedded web server is set correctly in my dyndns account.
When I open a browser (Explorer or Firefox) on the PC running the video camera application with embedded web server, I am able to connect to the video application's web server by going to the dyndns address linked to the machine running the video application. The video application's web server is set to use the dyndns address. That's the good news. The bad news is that I can't connect to the video application's web server from any machine that connects to the internet that uses a router other than the router used by the PC running the video application. I am only able to connect to the streaming video from the application's web server only on machines that connect to the internet using the same (home) router used by the PC that is running the video application.
Since I am able to connect to the video app's embedded web server successfully on the machine running the video application, it seems that at least something about the current port forwarding settings is correct. For example, if I uncheck 'enable' for forwarding of port 80 on the router settings page, I am no longer able to connect to the video app's web server when I try to do so in a browser running on the machine running the video app. When I re-enable port 80 forwarding on the router, I am again able to connect to the web server of the video application on the machine running the video app. I thought that by enabling forwarding of port 80 on the router and associating that port with the LAN IP of the machine running the video application, it would be possible to connect to the streaming video of the video app's embedded web server from ANY machine connected to the internet, but that is not the case. There must be some other router settings to update/change in order to get the port forwarding working to enable a successful connection to the video web server, but I am stumped. Very grateful for any suggestions as to how to get this working properly.
Thanks in advance...

The firewall log can be configured on the third tab in the window for the firewall settings, where you can turn the firewall on and off completely.
From your tests, though, it does not seem to be the firewall. However, to be sure, it would be good to check the log. It will help to eliminate the firewall as the culprit and you may find it handy in the future, too. ;-) Just don't forget to turn the log off again after you are done because it may cause some performance penalty on your system while on.
From what you write, it seems as if I should give a little networking background on the ip addresses you'll see. Your setup is (or should be) a modem connected to the WAN/Internet port of the WRT. The computer is connected into a LAN port of the WRT.
Your router has two IP addresses (that's what makes it a router): a WAN address and a LAN address. The WAN address is the address assigned by the ISP. It is a normal internet IP address. Everyone is able to send packets to this IP address. The WAN address is the one reported by whatismyipaddress.com, it should be listed in the dyndns record and it is the address that your router shows on the Status page. It's the public IP address of your router. Dyndns maps your dyndns.org name to that IP address.
Your router also has an IP address on the LAN side. You can configure it to be whatever you want. The default is 192.168.1.1 with netmask 255.255.255.0 and it is better to leave it like that or at least inside the network 192.168.*.*. 192.168 is a special, reserved IP address range for private networks. Basically, routers in the internet are not supposed to forward addresses in this range. That makes them suitable for private LANs as the packets never can get anywhere. Most people using Linksys routers have there LAN in 192.168.1.*.
The router acts as gateway, which means it forwards packets from PCs in the LAN to the internet and back. As all your PCs in your LAN share a single WAN IP address, the gateway does address translation (NAT). This works only in one direction: from the inside to the outside. The router remembers when a PC in your LAN sends something out and accepts the responses in and sending them back to the PC. If something comes in from the internet which cannot be associated with a ongoing communication the packet is dropped unless you use port forwarding.
All computers in your LAN either have a static IP address assigned or use DHCP to get it automatically. The router has a DHCP server as well which gives out IP address from 192.168.1.100-149 if not changed. With a router with default settings static IP addresses can be in the range of 192.168.1.2-99 and 150-254.
ipconfig /all reports your IP address in your LAN, i.e. an address 192.168.1.*. The gateway in this output should be 192.168.1.1 which is your router. And packet no in the LAN address range 192.168.1.* is send to the router which forwards the packets into the internet.
An address 192.168.1.* should not appear as internet address in the Status page of the router nor should it appear at dyndns.
Port forwarding is used to operate a server in the LAN. By default, a server in the LAN cannot be reached from the internet. You have to configure port forwarding for this. You configure that traffic bound for a specific port (e.g. TCP port 80 for http) on your WAN IP address is forwarded to the same port on a specific LAN IP address. If your server runs on 192.168.1.50 than traffic to your WAN IP address port 80 is forwarded to 192.168.1.50 port 80. That way your HTTP server can be reached from the internet. As you can only configure a fixed IP address in port forwarding it is recommended that the server uses a static IP address and not DHCP as in the latter case the IP address may change over time...
O.K. so much for networking. I hope that makes things a little clearer and you can verify that your setup is how it is intended to be.
I suggest the following: on the router's security page there is an option to block WAN requests. Remove the check if it is set (meaning: do not block). After you did that change you should be able to ping your WAN address (e.g. ping xxxx.dyndns.org) from the internet. That way we know that it is on the correct address.
Also on the Administration page make sure that remote management is disabled (should be like that per default) or that the management port is NOT 80 but for example 8080. What is your your UPnP settings on the same page?
O.K. that should be enough for the moment...

[svn:fx-trunk] 7743: Moving away from using namespace qualifiers in most cases in the SDK.

Revision: 7743
Author:   [email protected]
Date:     2009-06-11 06:53:10 -0700 (Thu, 11 Jun 2009)
Log Message:
Moving away from using namespace qualifiers in most cases in the SDK. We've run into a few cases now where the use of qualifiers in code that is called excessively can slow things down.
Bugs: SDK-21337
Reviewer: Ryan, Paul
QE Notes: None
Tests: Ran several random Mustella test groups, checkintests.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21337
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/HTML.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/fileSystemClasses/FileSys temDataGridNameColumnRenderer.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemChildrenLis t.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemRawChildren List.as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/Window.as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Application.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/ButtonBarButton.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DataGroup.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DropDownList.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Group.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButton.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButtonGroup.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/SkinnableContainer.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/DropDownCont roller.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ItemRenderer .as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ListBase.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/SkinnableCom ponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/Slider.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/core/SpriteVisualElement.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AddAction.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimateTransform.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/MotionPath.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AddActionInstan ce.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RemoveActionIns tance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/SetActionInstan ce.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/supportClasses/GraphicEleme nt.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/ErrorSkin.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/FocusSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/ModifiedCollectionView.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Form.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/FormItem.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/GridRow.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HDividedBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TitleWindow.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/CanvasLayou t.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintC olumn.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintR ow.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/PopUpButton.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Tree.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridItem Renderer.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/textClasses/TextRange.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/DefaultDataDescr iptor.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/HierarchicalColl ectionView.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Application.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Container.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponentGlobals.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddChildAction.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/CompositeEffect.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Dissolve.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/MaskEffect.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ActionEffectIns tance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AddChildActionI nstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AnimateProperty Instance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/CompositeEffect Instance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/DissolveInstanc e.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/FadeInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MaskEffectInsta nce.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MoveInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/RemoveChildActi onInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetPropertyActi onInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetStyleActionI nstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SoundEffectInst ance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/TweenEffectInst ance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ZoomInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/formatters/DateFormatter.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientBase.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/LinearGradient.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradient.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradientStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/InitLocalConnection.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/MainLocalConnection.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemChildrenList.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemRawChildrenList.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/dragClasses/DragProxy.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/marshalClasses/MarshalPopUpD ata.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/systemClasses/MarshallPlan.a s
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceBundle.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceManagerImpl.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/DateChooserIndicator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PanelSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpButtonSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpIcon.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpMenuIcon.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/SwatchSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/states/RemoveChild.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/CSSStyleDeclaration.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/LoaderUtil.as
    flex/sdk/trunk/frameworks/projects/framework_textLayout/src/mx/controls/dataGridClasses/T LFDataGridItemRenderer.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/Operation.as
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.vm

Revision: 7743
Author:   [email protected]
Date:     2009-06-11 06:53:10 -0700 (Thu, 11 Jun 2009)
Log Message:
Moving away from using namespace qualifiers in most cases in the SDK. We've run into a few cases now where the use of qualifiers in code that is called excessively can slow things down.
Bugs: SDK-21337
Reviewer: Ryan, Paul
QE Notes: None
Tests: Ran several random Mustella test groups, checkintests.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21337
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/HTML.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/fileSystemClasses/FileSys temDataGridNameColumnRenderer.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemChildrenLis t.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemRawChildren List.as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/Window.as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Application.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/ButtonBarButton.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DataGroup.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DropDownList.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Group.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButton.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButtonGroup.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/SkinnableContainer.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/DropDownCont roller.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ItemRenderer .as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ListBase.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/SkinnableCom ponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/Slider.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/core/SpriteVisualElement.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AddAction.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimateTransform.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/MotionPath.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AddActionInstan ce.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RemoveActionIns tance.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/SetActionInstan ce.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/supportClasses/GraphicEleme nt.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/ErrorSkin.as
    flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/FocusSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/ModifiedCollectionView.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Form.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/FormItem.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/GridRow.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HDividedBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TitleWindow.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/CanvasLayou t.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintC olumn.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintR ow.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/PopUpButton.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Tree.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridItem Renderer.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/textClasses/TextRange.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/DefaultDataDescr iptor.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/HierarchicalColl ectionView.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Application.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Container.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponentGlobals.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddChildAction.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/CompositeEffect.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Dissolve.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/MaskEffect.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ActionEffectIns tance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AddChildActionI nstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AnimateProperty Instance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/CompositeEffect Instance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/DissolveInstanc e.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/FadeInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MaskEffectInsta nce.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MoveInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/RemoveChildActi onInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetPropertyActi onInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetStyleActionI nstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SoundEffectInst ance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/TweenEffectInst ance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ZoomInstance.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/formatters/DateFormatter.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientBase.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/LinearGradient.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradient.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradientStroke.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/InitLocalConnection.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/MainLocalConnection.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemChildrenList.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemRawChildrenList.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/dragClasses/DragProxy.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/marshalClasses/MarshalPopUpD ata.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/systemClasses/MarshallPlan.a s
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceBundle.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceManagerImpl.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/DateChooserIndicator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PanelSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpButtonSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpIcon.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpMenuIcon.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/SwatchSkin.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/states/RemoveChild.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/CSSStyleDeclaration.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/LoaderUtil.as
    flex/sdk/trunk/frameworks/projects/framework_textLayout/src/mx/controls/dataGridClasses/T LFDataGridItemRenderer.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/Operation.as
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.vm

Newbie question: integrating SWF, movie files

Hi all!
Thanks in advance for your help--I'm trying to use Flash to
integrate several files into a slick screencast. Basically, I need
to use Flash to play a movie file, then play a SWF file, then
another movie file and be done. I was hoping to also put in some
text and animation (PowerPoint-like, not too intense) in between
those things, but can jettison that if that's difficult.
I know the import command does wonders with one video, but
I'm trying to use multiple types of files including SWFs, which is
throwing me off a bit. I realize I'm being incompetent here, but if
anyone has any suggestions, I'd really appreciate it. And this goes
without saying, but I don't mind coding at all.

I strongly recommend you to use Compressor. It is easy to use and there a lot of presets.

Integrating SWF built using SDK 4.1 into application built using SDK 4.5

Similar Messages

Maybe you are looking for