Integration Event for Opportunity and Account

I am building a WF (for Opportunity, when a new one is saved) that creates an IE with Opt.ID, Act.ID, OptName, OptNumber (custom field).
I understand that I can create a WS that consumes this IE, reads the Opt.ID and updates the Opportunity with the OptNumber - externally generated.
Now, this WS would need also to get the Account Name and pass it to another system.
Question is how using the Opt. APIs read the Account Name ?
Maybe I should create another custom field in Opt with a JOIN to get the Act.Name... and use this custom field in the IE and it would be ready availabe to it... No need for another call...
Pls. I´d appreciate any help / comment.
Txs.
Antony

Hi,
Have you checked/configured fields at Integration event level which will enable the event to trigger?
When you create the workflow action, you need to configure the Integration event where you need to check the fields which you want to be available in Integration event.
let me know if this helps.
Thanks,
Mayank

Similar Messages

Information about Integration WebDynpro for ABAP and Business-Workflow

Hi Experts,
I'm looking for information about
Integration WebDynpro for ABAP and Business-Workflow
Link, documents and books are welcome!
Thanks
mishak

If you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
Thanks,
Prasath N

[svn:osmf:] 17565: Fix FM-937: ProxyElement dispatches trait events for blocked and overridden traits.

Revision: 17565
Revision: 17565
Author:   [email protected]
Date:     2010-09-02 17:30:08 -0700 (Thu, 02 Sep 2010)
Log Message:
Fix FM-937: ProxyElement dispatches trait events for blocked and overridden traits. Add unit test.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-937
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ProxyElement.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestProxyElement.as

Integration Event for tracking changes to Activity Primary Contact

I want to trigger an Integration Event when the Primary Contact of an Activity is changed.
But, when I try to configure the Integration Event, on the "Field Tracking" page, I don't see any fields that relate to Contact.
It appears that I can track changes to Service Request, Campaign, Dealer, Delegated By, Lead, Opportunity, Owner & Site - but not Contact?
The only workaround that I can think of is to write workflow/default rules that will copy any field related to the Activity Primary Contact into a Custom Field on the Activity Record - and then tracking changes on that Custom field - but have so far failed to achieve that either.
Anybody have a solution?
Chris

Helpful, but we're six weeks away from our R16 date - I'm on R15 and may just have to cope without this integration for a while.

Integration events - Retrieve (get) and delete

Hello forum. First, I would like to send my new years best wishes to everybody, hope it will be good. Second, I am relatively n00b to siebel in general, however I got some EXP integrating applications, so even the technology is new, the concepts (overall) are familiar. Anyways, I am working as you may imagine by now, with the OnDemand CRM, which exposes some web services to deal with the integration. My first attempt was to create a consumer (this part is working fine) and retrieve N amount of integration events. Now I am on the part where I got to "delete" those events from the message queue and I am facing the problem that it will only accept two parameters to proceed with the deletion, which are based on an arbitraty datetime or based on a given last event.
On the documentation, it reads that you might delete the entire set of events or any subset, but with those only parameters expected (in the wsdl), how could someone achieve it ? I read and research before posting, of course, I found a post by some other guy that was doing the same and at least in the "getting" int events part, he was stuck until customer care said this kind some sort of typo and this cannot be done, I think this may apply here too, but I got to be sure before I proceed.
So, bottom line, it is possible ? What is the best way to do it ? One by one, taking a bunch of them ? Any recommendation is appreciated.
Thanks in advance.

I'm not really sure why your example is not working since we
are missing a good amount of the code that goes along with it
however whenever I need to check for either of those keys I
normally do it the following way as attached.

POs for service and account assignment

Hi,
I'm crearting a purchase order for services with item category P and account category K.
Actually the system doesn't assign automatically the G/L account in the field Account assignment of POs.
I set in T030, in transaction GBB, valuation modification 0001, general modification ZCO, valuation class (S001) and the G/L account.
Best regards

Hi,
While creating the PO, enter the material group and assign the valuation class to this material group in the folowing node, (Material Management --> Purchasing -->Material Master --> Entry aid for items without material master).
Once you assign the valuation class to material group, it will pick the G/L code from GBB in the OBYC setting (Table T030).
Hope it answers your problem.
Regards

How set ctrl +a event for Jbutton and esc event for closing jinternal frame

i am doing desktop project in that i need set ctrl event for button ,i am strucking in that area pls anybody help me to overcome this problem ,and also i need button in table when i press button it has to fill value in the next field ,its urgent please

Read the section from the Swing tutorial on [How to Use Key Bindings|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html]

Report for Material and accounting document

Hi all,
Is there any report to show the fields as listed below:
Mvt type Material Doc Accounting doc Posting date Quantity Ammount
thanks & regards
Chaitanya

hi,
You can check with the many reports like MB5B, MB51 etc...as suggested above...
But along with this you can check the table also like MSEG for your requirement... and MKPF for the material document...
Pls check ...
Hope it helps...
Regards
Priyanka.P

I just repaired my sons macbook and I need to test it. Can I start it and skip the setup for internet and account names?

My son's MacBook pro needed a new hard drive. He is out of state for a month.
I want to test it to make sure it has been fixed, but I cannot get past the start screens which require
an owner name, an account name and passwords. It states the account name cannot be changed once
entered. I dont want to enter info that might not be his preferences.
Can I bypass this screen? There is no "skip"nor "continue" button.
It wont let me proceed without an entry. Can I bypass this for now to simple
run through the basic programs?

How did you install the OS and which OS version did you install?
You do need to set up an account. I never enter my address, etc, but usually (when I want to sell a machine with a new install) set up a temporary account "user" with a password of 12345 with as little info as possible (it also helps if it's not connected to the internet at that point because it won't be able to contact Apple's servers. That way you can run it and he can establish another account when is is back.

Tables required for Invoice and Accounts

Hi,
I have done PO through (ME21) Tcode then Created Invoice for that PO through MIRO. And run Automatic Payment program through F110. Now I need to Know Account Document number for particular Invoice. i.e in which table it will store the value.
Regards,
Kiran

Download the tables wizard tool from
http://www.sap-img.com/sap-download/sap-tables.zip
This will give you more detailled information
on main tables and relations between them.
Regards,
Roy

Dunning proposal for item and account master record

Dear Friends,
In the dunning proposal list:
Block the line item or remove the block in the current dunning proposal
and also have another statement like Change the dunning and correspondance data of an account in the master record which is not at dunning proposal level.
as per both the statement I have confusion of below statement:
After the dunning proposal has been created, changes to the dunning data in items or master records are ignored in the current dunning run.
is it true?
Please reply.
Thanks and regards,
Mahendra Dev

Dear Deepak,
Thanks for your reply.
My doubt is some changes are made dunning list:
in the sap book its given a changes made at master record and items are not affected to the current dunning level
and only you can block and unblock the items which is affected to the current dunning level.
Is this conditions are ok or not?
Thanks and regards,
Mahendra Dev

CS Extension Check In event for InDesign and Illustrator

Hi,
For CS6 InDesign Similar to DocumentEvent.BEFOR_SAVE, do we have anything for check in event as well, I am using cs 1.5 sdk.
If that is not available, how we can implement such a functionality. Do we have to use Indesign SDK or are there any alternatives?
And in illustrator, i am not able to load the plugin AIHostAdapter.aip in CS6, it was working fine in CS5.
I am getting the error "Error Loading Plugins. AIHostAdapter.aip." Find attached screenshot.
How do i work around this problem?
Thanks in Advance,
Senthil.

Hello Paul bloxham
I don’t know much about any decent plugins for Illustrator, however I sometimes make graphs using Microftsoft Word then export/copy into Illustrator, then manipulate within illustrator if needed, not used Apples Numbers or other free software as yet to make any comment, but I do get satisfactory results from using Word.
Hope this is of help.

Overlapping events for resources and locations

Has anyone been able to configure iCal Server's Resources and Locations to NOT accept invitations if the resource or location is busy?
I am hoping the resource or location is intelligent enough to decline an invitation if it is already busy.
Any help would be appreciated.
Thank you,
Ray

I've run into this problem as well. I can't believe that there's no solution to this. It seems to me to be a pretty obvious need for any scheduling software.
Why even have a location and resource database, if users can make any event appointment for that location or resource regardless if it's available or not?

Authorization in Webclient on Sales Office for Opportunity and Activity

Hi all,
I am trying to set up ou authorization scenario in CRM 2007 Webclient.
I would like to restrict the access to Opportunities and Activities based on the Sales Office of the user.
I have set up the following objects:
CRM_ORD_LP and CRM_ORD_OE.
The USER is assigned to a Business Partner (Employee) which is assigned to a Position which is assigned to a Sales Group -> Sales Office -> Sales Org.. etc.
In SAP GUI this is working fine but in the Webclient I am able to create/edit and display opportunities and activities for all Sales Offices.
Please let me know!
BR,
//Anders
Edited by: Anders Grönwald on Dec 4, 2008 12:49 PM
Edited by: Anders Grönwald on Dec 4, 2008 12:55 PM

Hi Anders
Were you able to resolve this issue
If so could you indicate how this was achieved
Regards
Eddie

Triggering events for DBWR and LGWR processes and does CKPT writes to all datafiles headers(modified or unmodified) with new SCN no when checkpoint occurs.

Hello everyone,
Requesting help to understand.
a) When is database writer process triggered ?
b) When is log writer process triggered?
c) When is CKPT process invoked by oracle ?
d) Does CKPT process writes to all datafiles headers of datafiles that were modified as well as unmodified with new SCN number or only the modified datafiles ?
Kindly clarify . Thanks in advance .
- Gaurav R
Message was edited by: GauravRajput

Hello everyone,
Requesting help to understand.
a) When is database writer process triggered ?
b) When is log writer process triggered?
c) When is CKPT process invoked by oracle ?
d) Does CKPT process writes to all datafiles headers of datafiles that were modified as well as unmodified with new SCN number or only the modified datafiles ?
Kindly clarify . Thanks in advance .
- Gaurav R
Message was edited by: GauravRajput

Integration Event for Opportunity and Account

Similar Messages

Maybe you are looking for