Authorization in Webclient on Sales Office for Opportunity and Activity

Hi all,
I am trying to set up ou authorization scenario in CRM 2007 Webclient.
I would like to restrict the access to Opportunities and Activities based on the Sales Office of the user.
I have set up the following objects:
CRM_ORD_LP and CRM_ORD_OE.
The USER is assigned to a Business Partner (Employee) which is assigned to a Position which is assigned to a Sales Group -> Sales Office -> Sales Org.. etc.
In SAP GUI this is working fine but in the Webclient I am able to create/edit and display opportunities and activities for all Sales Offices.
Please let me know!
BR,
//Anders
Edited by: Anders Grönwald on Dec 4, 2008 12:49 PM
Edited by: Anders Grönwald on Dec 4, 2008 12:55 PM

Hi Anders
Were you able to resolve this issue
If so could you indicate how this was achieved
Regards
Eddie

Similar Messages

  • How to exclude sales office for combination sales order type/division?

    Hi experts,
    I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

    Hi
    Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
    Thanks
    Indranil

  • Sales office for an employee is displayed wrong for an activity.

    Hello,
    I am facing problem in Activity Moniter.
      An activity is maintained in the Tcode CRM_BUS2000126.So while monitering that activity through Activity moniter ,the Sales office for that particular employee is shown wrong and this sales office is not at all needed .
    So can i delete it.
    If I delete it will there be any problem .
    OR
    where can I make changes for Sales office if the sales of is wrong.
    Hint:In our Org structure the one userid is assigned to more than 2 Sales office.
    So please say whether this may be the problem or not.
    Regards,
    divya.

    As said in the preceding reply, if the status of the document is in simulation then you can delete else if it has been created, then document reversal needs to be done by selecting that particular document ID.

  • Not reflecting the sales offices for top down manual planning hierarchy

    Hi Experts,
    Please help me on this issue.
    I hava an Hierarchy like from District to Offices
    for eg: for district-                'ZBHDEL' I have salesoffice like 100, 101, 102, 103,105.
    like wise for other district          'zbhyd' i have salesoffices like 200, 201, 202.
    I have created the Mannual layout with Hierachy datamodel with BPS characteristics, TOP-DOWN, AND enabled check entry.
    In the additional setting i have select All Possible combinations.
    District at Headerlevl, along with Product and Division
    and selected salesoffice at Leadcoloumn.
    My Planning levell and package contains : for sales office slected Hierarchy at planning level. 
    BRAND
    Base Unit
    Company code
    Country
    Currency
    Division
    Fiscal year/period
    Fiscal Year Variant
    PRODUCT
    SIZE
    Sales District
    Sales Office
    Segment
    Version   
    *The Prolem is when i input some plan for a district ZBHDEL from the other layout, WHEN I RUN THE sALES OFFICE hIERARCHY
    Mannual Layout its not reflecting the sales office where i have to plan for the salesoffices by seeing the values
    of planned District.
    where as for one district i can able to see the sales offices. even i have maintained the masterdata at Infoobject level.
    Can anybody please help me out.
    thanks
    Deenu
    Edited by: deenu prasad on Aug 4, 2010 7:07 AM

    Create hierarchy for sales district info-object in following way.
    Sales District         Text Node                          Level 1
    Sales Distirct         Characteristics Node         Level 2         
                                  value 1 = ZBHDEL
                                  value 2 = ZBHYD
    sales Office          Characteristics Node         Level 3
                                  values will be according to district (include diff sales offices for diff districts in level 2)
    restrict district to this hierarchy in planning level and plan according by both approaches (create 2 seperate layouts):
    Top down  - to plan at main node i.e. sales district
    bottom up - to plan at sub node  i.e. sales office

  • Before I transfer files from my PC to the new imac should I load office for Mac and parallees? Will this mean I have to open the new account on my imac first and thus have two user accounts when I transfer the PC? I would prefer to only have one account.

    IIt was in my mind to load office then transfer. After to load paralels and transfer my windows system. I have a new copy of office for Mac plus paralels PC to Mac transfer version 8. As this is my first mac (I have ipads and iphones) I am unsure of what to do. Also to confuse matters I use a windows laptop as my sync machine for the phones and ipads (i do have a cloud account with backup) can I transfer both machines to my new imac? I will have a 1tb fusion drive + 2tb time capsule although I only have less than 400GB of data on both machines. Hope this is not too confusing for everyone but I am looking forward to sorting this mess out by just using the one machine.

    Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant.  If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

  • I have tried to install office for mac and an iWork trial and each time I go to install my "terminal" opens with the heading bash-80X24 and in the box reads Joel$-office installer.mpkg joel$ . nothing further happens

    I have tried to install office for mac and an iWork trial and each time I go to install after downloading my "terminal" opens with the
    heading
    bash-80X24 and
    in the box reads Joel$-office installer.mpkg joel$ .
    nothing further happens

    This is thread from Apple discussions.
    Look for the suggestion from Shootist007 towards the end of the 2nd page.
    It is just may be useful.
    https://discussions.apple.com/thread/3709115?start=15&tstart=0

  • I buy Office for mac and i need install it in  mac air

    I buy Office for Mac, and a new Mac Air ... how do I install it, with out the cd unit? ... there´s a link in apple.com where i can download it?

    There isn't one on Apple's site, but if you have the product key, there's one on Microsoft's site. Click here.
    (112660)

  • Is there a difference between microsoft office for mac and for windows?

    As a college student it's important that everything is equal for windows and mac for using instructions. So i am wondering if theres a difference between microsoft office for mac and for windows?

    There are differences between the two version of Office. If you need to be exactly like the Windows version, you will have to run Windows on your Mac.
    Allan

  • Windows compatibility; Delete key, view, Office for Mac and  Hassels

    Dear Friends
    I liked the style of the Mac powerbook, and after years of happy use of a Samsung notebook, I decided to take the plunge and buy a Mac. I amlo liked the idea of contributing to diversiy and not putting all my bucks in Gates's basket! People assured me there would be no compatibility problems bwteeen Office for PC and Office for Mac. So I moved from PC to Mac, but have had lots of problems. I have a powerbook 12". My main issues are that:
    1. Word and Powerpoint for Mac do not always convert properly when I take my files to work where I have to use PC. I find editing in powerpoint for Mac less easy than PPT for windows. Before an important presentation at an international conference recenly, the file I worked on on my Mac came out all funny when I loaded it onto the windows laptop that was already set up. I lost a good five minutes ******* around beore an international audience. Someitmes formatting in Word for Mac jumps and highlights and bold and bullet points go all srtrange or are lost when I take the file to work.
    2. The keyboard of the Mac is frustrating. I usually delete rightward; to do this on a Mac I have to hold down Fn and then delete, i.e. two finger operation. I always screw up since I am so used to the delete key on my PC and my brain gets in a twist. Is there a way I can change this?
    3. The power book is quite heavy (a simple moan as I travle a lot).
    4. Word, PPT and internet pages do not cover the whole screen, just the left half to three quarters, with a strip of unused screen on the right. I have been unable to make word for Mac ect cover the whole screen, so I always have to adjust the view size and then half the text is cut off. I would like to see the whole screen used. This is frustrating as the Mac has a kind of grainy screen.
    Any suggestions?
    Chris

    1. For problems related to Microsoft Office you should post your questions to Microsoft's own Mac discussions:
    http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups
    2. If you want to "forward-delete" on a Mac without hitting the function key, then you'll have to purchase a full size Apple USB keyboard.
    3. Sorry. Can't help with that one. Maybe you should have bough a ligther 15" Powerbook.
    4. Again, sorry, but that's not a bug, it's a learning curve. Longtime Windows users seem to be more often than not used to working with applications and windows that cover the whole screen. Mac users generally don't. Just drag the windows over to the right or click the green maximize button at the top left of each window.

  • Help with Entourage part of MS Office for Teachers and Students vs Airport

    I can get on the internet via Airport, and can receive but cannot send messages from Entourage. However, I can get on the Cox Website and send messages that way. I can't find any informationa regarding MS Office for Teachers and Students in the long lists of discussions. Where am I going wrong?

    I wrote this mesage to Microsoft and although they also responded I have not received the proper solution. Can Apple help?
    Can get on internet via Airport but cannot send messages via
    Entourage, although I can go around MS office for Teachers and
    Students and get on net via Cox homepage and send messages from there,
    but it is time consuming. Tried Help, but it was no help. Recieve
    error message 3259. HELP
    Is that 3259 or -3259?
    -3259 is an exchange error. One possible solution: seems to be solved
    by
    actually making Global Catalog servers available for LDAP lookups.
    You don't mention what type of account... POP, IMAP, Exchange???
    See the Accounts setup page for help setting up your accounts. If you
    are
    still having problems, please give us as much detail as possible.
    See this page for help setting up your accounts.
    <http://www.entourage.mvps.org/accounts/index.html>
    Diane Ross, Microsoft Mac MVP
    Entourage Help Page <http://www.entourage.mvps.org/>
    Entourage Help Blog <http://blog.entourage.mvps.org/>
    Replied, to her, but nothing happened.
    so here is my Reply again..
    Yes it is a negative number. How do I make Global Catalog servers
    available for LDAP lookups? I have tried everything else on your
    list.
    Entourage works fine on cable, but not on Airport on a wireless
    line. I have a pop.west.cox.net for receiving and smpt.west.cox.net
    for sending which works fine on CABLE so following the advice on
    Entourage help page has not been a help here in Mexico. The
    administrator knows nothing about Apples, but says that Mac users have
    similar problem which is related "security."
    When I was in Ontario CA, I was able to send messsages at first at the
    Hotel wifi until the administrator sent this message:
    Connected to 64.136.28.83 but greeting failed.
    Remote host said: 550 Access denied...
    3ed055bd75746da58525492d21b125212125a9b5f9ed11112040f58d30318df589e1...
    I'm not going to try again; this message has been in the queue too
    long.
    --- Below this line is a copy of the message.
    Return-Path: <[email protected]>
    Received: (qmail 8376 invoked by uid 0); 19 Jul 2007 21:42:01 -0000
    Received: by simscan 1.2.0 ppid: 8370, pid: 8372, t: 1.1997s
    scanners: clamav: 0.90.2/m: spam: 3.1.8
    X-Spam-Checker-Version: SpamAssassin 3.2.1 (2007-05-02) on
    hiltonsmtp.worldspice.net
    X-Spam-Level: *
    X-Spam-Status: No, score=1.6 required=6.5 tests=BAYES60,HTMLMESSAGE,
    MIMEQP_LONG_LINE,RDNSNONE autolearn=disabled version=3.2.1
    Received: from unknown (HELO ?172.28.172.225?) (12.189.80.2)
    by hiltonsmtp.worldspice.net with SMTP; 19 Jul 2007 21:41:59 -0000
    User-Agent: Microsoft-Entourage/11.3.6.070618
    Date: Thu, 19 Jul 2007 14:49:50 -0700
    Subject: Re: Rachel
    From: Carol June Schultz <[email protected]>
    To: Jim Carlisle <[email protected]>
    Message-ID: <C2C52A8E.B7%[email protected]>
    Thread-Topic: Rachel
    Thread-Index: AcfKTrsuZLbIzZBEdyhqAAbYxgIw==
    In-Reply-To: <[email protected]>
    Mime-version: 1.0
    Content-type: multipart/alternative;
    boundary="B326770139121981"
    This message is in MIME format. Since your mail reader does not understand
    this format, some or all of this message may not be legible.
    Connected to 64.136.28.83 but greeting failed.
    Remote host said: 550 Access denied...
    3ed055bd75746da58525492d21b125212125a9b5f9ed11112040f58d30318df589e1...
    I'm not going to try again; this message has been in the queue too
    long.
    Is this enough information?

  • Office for iPad and iOS 8 Document picker functionality

    Hi all,
    we want to integrate iPad application with our Office for iPad but with no success yet. Can you please advise if Office for iPad is currently supporting iOS 8 Document picker functionality? If not, then when it will support the integration between
    Office for iPad and iOS 8 document picker..?
    Thank you in advance.

    Hi,
    We support Office for Windows in the current forum, since this question is about Office for Ipad, I suggest you post the question in Office for Ipad forum:
    http://answers.microsoft.com/en-us/office/forum/office_mobile-word-os_device_ipad?tab=Threads
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Installing microsoft office for mac and getting prompt for installer password.  i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

    installing microsoft office for mac and getting prompt for installer password.  i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

    You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
    Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
    For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith.

  • I just bought the Office for Mac and when I tried to install it, they ask me for my password. I dont remember it, what do I do?

    I am trying to install Office for Mac and they asked my password. I dont remember, what can I do???

    If you do have password setup on your computer & you get a window asking for one for an app, leave the entry blank and click the OK button or whatever button it has. 
    Care to share which OS you are using? 

  • HT2477 Are documentS created with Microsoft office for windows and Microsoft office for mac are compatible with each other

    Are documents created with Microsoft office for windows and Microsoft office for mac are compatible with each other?

    As with a lot of software, it depends on the version of Word, and what features the author used.
    Technically, Office 2010 for Windows and 2011 for Mac are supposed to be feature compatible. As are Office 2007 for Windows, and 2008 for Mac.
    However, if a person using Office 2010 / 2011 used a feature that only exists in that version and sends the file to someone using Office 2007 / 2008, they would very likely have trouble opening the file, or having it display as intended.

  • Instructions for Downloading and Activating the JCOP Tools

    In response to my question:
    I refer to JCOP Tools available on Eclipse.
    If the plug-in free for download?
    If it is not, kindly provide a proper hyperlink from which those interested can place their order.Listed below is the reply from IBM. Can anyone who has successfully obtained the activation code this way confirm whether you need to foot the postage?
    Cheers!!!!
    There is no charge for the JCOP Tools. The tools are provided as-is with no warranty or support. Instructions for downloading and activating the tools follow.
    Please note that because our Java Card operating system is now available for more than one silicon vendor, IBM will no longer act as a distributor for sample cards. If you require a sample card, you must now approach the silicon vendors directly . Our current silicon partners are Philips Semiconductor, Samsung and Sharp. In addition you may be able to obtain JCOP sample cards from suppliers on this list http://www.zurich.ibm.com/jcop/order/cards.html
    JCOP Tools are subject to US Government Export Controls, and therefore each install has to be activated individually to ensure compliance. Please follow the instructions below for each copy of the tools that need to be activated.
    Prerequisites:
       1. If you do not already have a Java Runtime Environment (JRE) installed, download and install a JRE or JDK. You can do so from this website (http://java.sun.com/j2se/1.4.2/download.html). Please note that we recommend the use of JRE version 1.4.2.
       2. If you do not already have the open source software development environment Eclipse installed, download and install Eclipse (http://www.eclipse.org/), You can do so from this website(http://www.eclipse.org/downloads/index.php). JCOP Tools require Eclipse 3.1
    To download the tools and start install:
       1. Download the current Update Site image from here (http://www.zurich.ibm.com/jcop/download/eclipse/image/tools.zip)
       2. Unzip the downloaded file to a location of your choice
       3. Start the Eclipse IDE
       4. From the menu bar click on Help > Software Updates > Find and Install
       5. In the Install/Update Dialog select Search for new features to install
       6. Click Next
       7. Click on New Archived Site . . . and browse to the location chosen in step 2
       8. Select the file tools.zip
       9. Click Open then OK then Finish
      10. Eclipse Update Manager will start to install the plug-in, continue with the install as needed.
    For an activation code please send me ([email protected]) the following information:
       1. Your full postal address  - the serial number will be sent via International Courier for US Export control reasons.
       2. Your contact telephone number
       3. The serial number of your JCOP tools install
       4. Your planned usage/reason for needing the JCOP tools
       5. If a student, a copy (fax or digital photo) of your student ID
    For the serial number (item 3 above):
       1. Ensure you have downloaded and installed the JCOP Tools
       2. Start the Eclipse IDE
       3. From the menu bar click on File > New > Project
       4. In the New Project Dialog expand the Java Card folder
       5. Select Java Card Project
       6. Click Next
       7. You should now see the JCOP Licensing Wizard
       8. Click Next
       9. Select Verify an Activation Code
      10. Click Next
      11. The Serial Number should appear on the next page, above the Activation Code entry fields.
      12. Once you have that number click on Cancel then Abort (Note: the Java Card project choice will be disabled until the next time you restart Eclipse)

    For those who are interested to use the JCOP simulator for a start, I have checked that the plug-in and feature files (in tools.zip) for Eclipse are still available at IBM site, please download and install yourself.
    I still keep a copy of user guide for JCOP tools (version 3.1.1a) and the contents are still relevant to Version 3.1.1b simulator in tools.zip.
    If you are interested to have a copy of such document, kindly drop me an email to [email protected]

Maybe you are looking for