Dunning proposal for item and account master record
Dear Friends,
In the dunning proposal list:
Block the line item or remove the block in the current dunning proposal
and also have another statement like Change the dunning and correspondance data of an account in the master record which is not at dunning proposal level.
as per both the statement I have confusion of below statement:
After the dunning proposal has been created, changes to the dunning data in items or master records are ignored in the current dunning run.
is it true?
Please reply.
Thanks and regards,
Mahendra Dev
Dear Deepak,
Thanks for your reply.
My doubt is some changes are made dunning list:
in the sap book its given a changes made at master record and items are not affected to the current dunning level
and only you can block and unblock the items which is affected to the current dunning level.
Is this conditions are ok or not?
Thanks and regards,
Mahendra Dev
Similar Messages
-
Proposal of partner function and related master record in sales order
Hi Gurus,
As we know, a partner determination procedure is used to propose partner functions and the master data tied to them in the sales order.
I need to confirm the following if understanding is correct:
1. 1st a customer master record is entered with all the partner functions, say, SP SH PY BP and 9E (PE partner type).
The respective master record values like who is the SP SH PY BP and 9E are specified in the partner function tab also.
This customer master is assigned to a account group.
2. a Partner determination procedure is created and the same partner functions assigned to it.
Next, this procedure is assigned to the account group.
3. When I create an order for this customer, the sales order's partner function tab should automatically be populated with the partner functions and the respective master data value as defined in the customer master record.
Questions:
1. What if the partner determination procedure was not defined with 9E Partner function but the customer master record is?
2. What if the customer master record was not defined with 9E but the partner procedure is?
3. Why the partner procedure need to define the partner functions if its assigned to account group to which the customer master is assigned to already?
4. If the partner function 9E is not proposed in the sales order, can user manually enter this partner function and the respective master record value in the sales order partner function tab?
Have a great day!
regards
M RussoHi,
1. What if the partner determination procedure was not defined with 9E Partner function but the customer master record is?
If the partner determination procedure is not defiend you can not maintain same in customer master the system will through you error message PE is missing.
2. What if the customer master record was not defined with 9E but the partner procedure is?
It depends how you want propose the same,
According the function it behaves, you can make this field is mandatory if you want the same is to customer master
3. Why the partner procedure need to define the partner functions if its assigned to account group to which the customer master is assigned to already?
normally the standard partner procedure follows as it is SP SH BL PY Still if you want add some other partners(agent,employee,contact person...etc.) you can define the same in the procedure.
4. If the partner function 9E is not proposed in the sales order, can user manually enter this partner function and the respective master record value in the sales order partner function tab?
As you can refer the second point if you set as optional you can enter the same in customer master partner function tab.
Hope this can helps,
Thanks and Best Regards,
Muralidharan S -
I am unable to generate a Dunning Proposal for Promise to Pay items
Please advise how or if its even possible to generate a dunning proposal for overdue Promise to Pay items. Currently after debugging I find that the Dunning Proposal filters out any items that are from open promises. Is there a way to generate the dunning proposal for promise to pay items that are overdue? I'm using ECC 6.0 EhP 4.0 PSCD module
Within SPRO there is some config to define a dunning block for a promise to pay. I would suggest you check here.
FSCM >> Collections Management >> Int with AR >> Promise to Pay >> Make settings for Promise to Pay.
If this does not work, I would assume this is because you are using FI-CA and the config is slightly different. -
Update dunning level and dunning details for a contract account
Hi All,
I need to update the dunning history details(dunning level) for a contract account.
I am using the table FKKMAKO(dunning header).
Let me know if there is a Function module/BAPI/ any other way to update the dunning history details
Regards
Shiva545315 - FAQ: Dunning
[3] Question: How does the system determine the dunning level in the
master record?
The master record stores the highest dunning level that has been
determined for the account during the last dunning run.
If an account receives several dunning notices (e.g. in the case
of dunning by dunning level), make sure that you use ascending
order when printing, since the master record is updated after
each dunning notice.
Note 838334 may also be the case.
cheers,
Jon -
Findind Cleared open items for G/L account master (company code)
Hi All,
I wanted to incorporate one logic to find the whether open items have been cleared or not for G/L account master (company code).
Currently, I am fetching the data from SKB1 based on company code.
Then i am passing the GL account to BSIS table to find the whether all the accounts have been cleared or not.
Is this the correct procudure or any other procedure to find the GL account is been cleared for open items.
Is there any Function modules to find this any way.Thnkx.
I am writting a report where i need to check the above scenario.
Earlier we planed to call FBL3N to check the same, but
But i need to call FBL3N in my report program. Which is not correct procedure
Hence we taught to take all GL accounts from SKB1 and pass it to BSIS table and check.
Is there any other way rather than the above one. -
POs for service and account assignment
Hi,
I'm crearting a purchase order for services with item category P and account category K.
Actually the system doesn't assign automatically the G/L account in the field Account assignment of POs.
I set in T030, in transaction GBB, valuation modification 0001, general modification ZCO, valuation class (S001) and the G/L account.
Best regardsHi,
While creating the PO, enter the material group and assign the valuation class to this material group in the folowing node, (Material Management --> Purchasing -->Material Master --> Entry aid for items without material master).
Once you assign the valuation class to material group, it will pick the G/L code from GBB in the OBYC setting (Table T030).
Hope it answers your problem.
Regards -
Relation between Invoice Line items and Accounting Line item
Dear All,
My requirement is to print all the invoice documents and it's tax values like cenvat, Ecess, BED and VAT.
I have to fetch these tax details from BSEG table .
I' am getting Invoice number ( RBKP-BELNR ) from BKPF-AWTKEY .
Can any one please tell me how to relate the Invoice line items and Accounting document line items..
Any BAPI or FM is there to retrieve these data.
Please do needful in this regard.Hi,
from table bseg - field Koart
K = Vendor
D = Customer
S = G/L account here tax lines identify with buzid = T
or take table bset for taxes
Andreas -
Purchase Order - No details for medium PRN in master record
Hi together,
we implement SRM 7.0 with Netweaver Portal 7.0. I'd like to create a purchase order with a user who has the role /SAPSRM/OP_Purchaser and is assigned to purchase organisation and purchasing group in the organizational structure.
If I create a purchase order and press "CHECK" I get the following error message: "Output: No details for medium PRN in master record" and I can't create the purchase order, only SAVE.
The user has the attribute PRI in the organizational structure and it is set in the user master data Defaults->OutputDevise locl.
Is there somthing more I have to do ?
RegardsI found the entries for output-printer in the PO.
-
Dunning proposal for more than 8 documents using F150
I have a requirement to make dunning proposal for more than 8 documents through transaction F150 in a single run for same or multiple customers but it is not allowing to create .Can somebody please advice what i could do ??
<subject edited by moderator>
Message was edited by: Manish KumarHi Nanditha
According to SAP, BDC is not possible for Enjoy transactions. BDC is based on screen technology where as Enjoy transactions are based on control technology and are not compatible for BDC....So better try to use bapi( BAPI_INCOMINGINVOICE_CREATE)
Regards
Jeevi -
How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks
The password is set on the WiFi router providing the service, by the owner of the network to prevent unwanted "guests" accessing the network. The only way to know it is to ask the owner permission to use the network. Otherwise, you have to find a free WiFi hotspot that doesn't require a password.
-
Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra. -
BAPI_PO_CREATE1 for blocked item and account assignment category Q
Hi,
I am facing an issue while creating PO with items which are blocked ie LOEKZ = 'S', and account assignment category 'Q'.
Though I fill wbs element in POACCOUNT and POACCOUNTX structures, after execution it is being erased and am getting an error: "Enter WBS Element" with an information message "Change G/L Account could not be effected".
Please help.
Thanks in advance.
Regards
KalyaniHi Ravi,
Below is the code:
POITEM-PO_ITEM = '00010'
POITEM-DELETE_IND = 'S'
POITEM-ACCTASSCAT = 'Q'
POACCOUNT-PO_ITEM = '00010'
POACCOUNT-SERIAL_NO = '01'
POACCOUNT-CO_AREA = '1000'
POACCOUNT-WBS_ELEMENT = 'XXXX'
I filled POITEMX, POACCOUNTX structures too.
When I dont pass POITEM-DELETE_IND = 'S', the PO is being created.
But my requirement is to make the item blocked.
Thanks in advance.
Regards
Kalyani -
Sort Key in G/L Acounts and Customer MAster Records.
Dear SAP Guru's,
What is the specific use of the Sort Key?How will this effect the Line item entry in FBL5N?
In our Company The G/L Accounts the sort key is maintained As 000 Allocation Number.
_Also In Customer Master-->Company Code Data
The Feild sort key : It is maintained "000" Allocation Number _
If I change the sort key Now after 1 year of several records updated Will the System sort according to the changed sort key?
I want the sort key to be document Number Now after a year will the previous records be shown with the immediate effect.
I have gone through this link.
https://www.sdn.sap.com/irj/sdn/forums.
regards,
Amlan SarkarSort key field is also known as Allocation field.
The u201Callocation fieldu201D is populated automatically onto line items, during document entry, based on the default sort indicator set in the master record.
When you display or change line items, they are displayed in a standard sort sequence as per sort key defined in master records.
Sort key is defined in G/L master, Vendor master and Customer master. The key defined here is taken as the default key by the system when you want to display the line items pertaining to that account.
The sort key determines what is populated in the allocation field upon posting.
Changing the sort key will only change future postings not already existing line items. -
Hi,
When we switch the post automatically tick on the main bank account GL master record and then import the bank statements via transaction FF_5, we get an error message saying the account can only be posted to internally. In other words it does not want the post auto tick to be switched on ehen we import the bank statement.
Our SOX auditors require that the post auto tick be switched on for the main bank account GL master.
Please help
Many Thanks
Pops BalramHi,
Are you using T Code:FF_5 just to import the bank statement? Then i guess you can switch off the 'Post Immediately' radio button and switch on the 'Do Not Post' button. Hope that will work. Else if you need to Post it through this T Code then i guess you can't do it unless you take off that 'Post Automatically only' option.
~Andrew -
Entry aids for items without material master
Hi All
Can someone remind me....
I want to default G/L accounts directly into the purchase order non-material master line items based upon the material group.
I have added specific valuation types to the entry aid config table in purchasing but now cannot remember what accounting entry I need to make to link the valuation class to an expense account
Is this in valuation and account assignment? which business key or modifier?
Thanks for any suggestions
SteveHi,
To link the valuation calss to G/L proceed as below.
In OME9 the Cost centre K should have the Modifier VBR.
In OMSK create a new Account Category Reference with description.
In same OMSK create a new Valuation class and refer the new Account category reference.
In OBYC against T key GBB against the suitable valuation modifier add General modifier VBR ,new Valuation Class and debit and credit the appropriate G/L.
Now assign the valuation class to the material group in entry aids without material master.This will make the G/L adopted in PO.
Dhruba
Maybe you are looking for
-
I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?
-
Hi SD Gurus, To prepare a Customized report on Stock statement, I need the opening stock of each material on date wise. In MB5B, I am getting the opening stock. I have to give input to my ABAPer where to pick this value. Pl give your valuable inputs
-
how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know
-
Hi All , Is there any Function module that gives me all the details of the PO ? which is available in the transaction ?? Thanks .
-
Measuring percentage of space used by type of content?
I work with a weekly publication where we try to keep advertising content to a maximum of 70 percent for every 20 pages. Is there a way, through InDesign, to have the program track specific kinds of content (ie: advertising) by the amount of space us