Integration of BW data and HCM

Dear Forumers!
I'm from HCM. We were given a task to find out where data elements (codes) form BW functional module can be taken in HCM? We cannot make head or tail out of it - hope someone can help us
These codes are EBITDAMargin, TFTE, EBITDA, CoeffTL, CoeffSL, CAPEX_R, CAPEX_BI, LTA, MAR, StabCoeff, CPPlan
Perhaps, data can be obtained from some reports... we dunno...
Looking forward for any assistance!
Regards,
Eldar Hamitov

Hi Eldar,
Check this link: http://help.sap.com/saphelp_nw70/helpdata/en/26/77eb3cad744026e10000000a11405a/frameset.htm
It's the standard content from BW for HR.
Hope this helps.
Regards,
Diego

Similar Messages

We have 2 apple computers and 3 ,4g iphones can i sync all without looseing data and how?

Our family has the mac computers and i phones. I am fearful of deleating all information from either or all when I plug them in.

An iPhone can sync to one and ONLY one iTunes library at a time. Pick a machine for each phone to sync to and stick with it. It would also be wise to make sure each family member has their own user account on each machine, especially the machine(s) used for syncing to maintain the integrity of their data and avoid cross contamination.
Best practice says use a unique iTunes ID for each family member as well.

Creating data and .par files using SWIFT Integration Package

Hi,
I have a requirement to generate a data and .par file using SAP PI Integration package for SWIFT.
I am following the SAP Note: 1303428.
I have created 1 sender and 2 receiver comm channels(one for payload and other for par). Used operation mapping SWIFT_payload_parFile_split in the Interface determination.
I am using the adapter module : localejbs/swift/FileActConversionToSWIFTModule and setting the parameter DetachParameters to true. This adapter module is being used in all the three channels(1 sender and 2 receivers).
I have used ASMA ans has set the FileName checkbox.
Now after placing the file in the input directory, the file with the same name gets created in the output directory but the file is exactly same and also no .par file is getting created. I have set the Empty file handling to Ignore, so it shows that there is no data to create a .par file and only payload file is getting created but the payload file is exactly same.
Also if I use the adapter module : localejbs/swift/FileActConversionToSWIFTModule in only the sender communication channel, a payload file gets created like below.
<?xml version="1.0" encoding="UTF-8"?>
-<ns1:SWIFT_payload xmlns:ns1="http://sap.com/xi/SWIFT"><payload>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</payload></ns1:SWIFT_payload>
But while creating the par file, it shows that the file could not be overwritten and so the .par file is not getting created.
I need to understand that:
1) How do I configure both of my receiver channels i.e. what should be the difference. Currently, I am just setting the
same Output directory in both and file name schema * and has used ASMA with FileName parameter. So same name files are getting created and so one file gets discarded. How to create a .par file.
2) Also Is the file above is the correct file required by SWIFT.
3) Also when I check in SXMB_MONI, I can see that after running the adapter module same payload as given above is going in both payload and par files i.e. also if I am using different names in my receiver communication channels two files are getting created payload and par both are having the same payload. So what exactly should get created.
Kindly guide on this implementation.

Hi,
I am able to generate the .par file by setting the localsecurity to true and the KeyId from the key manager.
Now two files are getting created .xml and .par. .xml file which is the payload file is the same as the input file with no difference and contains both the overrides and the data parameters. The .par file contains the Algorithm and the Value.
Is this correct?
Also suppose the input file name is SEPA.xml, then the payload file is created with the name as
SEPA.xml and the par file is created with the name SEPA.xml.par. I need only SEPA.par. How to achieve this.

Integration with Outlook - how to increment end date and time from start date/time

Hi,
I want to add a variable amount of time to an appointment start date and time in outlook, through vba in access. Code below shows what I've done:
======================================
Dim olApp As New Outlook.Application
Dim olAppointment As AppointmentItem
Dim myRequiredAttendee As Outlook.Recipient
Set olAppointment = olApp.CreateItem(olAppointmentItem)
With olAppointment
.Start = DateValue(strStartDate) + TimeValue(strStartTime)
.Duration = intDuration
.End = DateValue(strStartDate) + ????????
=======================================
What do I replace the ????? with so that it increments the start time by any duration I decide in minutes? Using the duration doesn't seem to work and I also want to be able to have the appointment span a number of days, e.g. could start at 930am on
Monday and end at 10am on Weds, but want to set the end time relative to the start time.
Thanks,
Chris.
_________________________________________________________ Every day is a school day!

I've tried that, but it throws out a datatype mismatch error :(
It would be helpful if you posted the exact code you tried. In my tests, setting teh .Duration property appears to work. However, if you want to set the .End property to a specific number of minutes after the date/time of the .Start property,
this works for me:
With olAppointment
.start = DateValue(strStartDate) + TimeValue(strStartTime)
.End = .start + TimeSerial(0, intDuration, 0)
End With
Assuming, that is, that intDuration contains the number of minutes the appointment should last.
Dirk Goldgar, MS Access MVP
Access tips: www.datagnostics.com/tips.html

Diff B/W master data and transaction data

Hi all,
What is the main Diff B/W master data and transaction data. give me some example ?
Thanks in Advance
Krish...

hi krish,
MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,
GNK.

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How to display the current Date and time in xslt version 1

i am using xslt version 1 .i want to display the current date and time in the output xml using xslt(Jdeveloper) ..i just added the namespace xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns1="urn:oracle:integration:b2b:7D30046DC68A4FA689956D8241FA3B99">
and used thsi function <xsl:value-of select = "xp20:current-date()"/>
but it does not works for me ..help needed????
Edited by: user9519185 on Jan 20, 2009 3:04 AM

Use a formula: =NOW()
Format the cell for Date and Time, with both the Date part and the Time part displayed. Format the two parts as you wish, using the choices in the Inspector's menus.
The cell will update each time the table is recalculated.
(Description is for Numbers '09 (Mac), Numbers for iOS will be similar, but not necessarly identical in details.)
Regards,
Barry

Using GREP to bold Date and Event Name

Hi
I am stumped at how to properly apply a bold style to a combination of dates and event names using GREP. I am including three examples below. I do have Paragraph and Characters styles set up. The area I would like to effect the change is in all caps. I am trying to add a bold style only to the dates and the title of the event with out changing the rest of the information.
I started of with this GREP Style:
\d{1,2}\/\d{1,2}|\d\-?\s|\u
It is bolding the dates and the name of the event. But it's not bolding the small dash between events that have a beginning and end dates or the en dash. It is randomly bolding other numbers and capital letters that it should not. Very frustrating. Each time I alter the GREP Style above, it makes it worse. This is as close as I got to the desired effect. Any ideas how to fix this?
12/6-8 — HEALING WEEKEND AT TRUE NORTH HOLISTIC CENTER. Friday 11am-5pm. Private Integrated Healing sessions, Friday 6:30pm-Sunday noon. “Blue Christmas” Retreat: Coping with Sadness at the Holidays; Sunday 3-7pm. Public Integrated Reiki™ clinic. Hubbardston, MA www.truenorthholisticcenter.org. (978) 820-1139.
12/6-12/8 — READ AND PLAY MUSIC IN A WEEKEND! World famous seminars turns beginners into musicians, revitalizes and inspires even pro musicians. 169 Mass Ave, Boston. (781) 599-1476 or http://signup.understandingofmusic.com or [email protected]
12/7 — REIKI CERTIFICATION. Wilton, NH. Libby Barnett, MSW. 32 years experience. Reiki Energy Medicine author. Notebook, pin, certificate awarded. Credit cards accepted. CEU’s/contact hours. Call (603) 654-2787 or www.reikienergy.com. Reiki II: 12/8

Thanks! That works. I am using a paragraph style for the body and have a bold character style for the information that needs to be bolded. I notice there are some listings that uses a colon and the bolding continued into the description where the first period appears (see samples below). I added a colon (to the shorter GREP style you suggested) in addition to the perod and excalamation point to search for.. Now the bolding stops at the colon but does not include up to the word "CARRY" (see first example). The second example, the bolding should stop after "FAIRE" but cotinues to the word Wisdom because of the period.
I wish there was a option in the GREP drop menu to search for All Caps only and not Any Uppercase Letter. Is it a case were I need to manually edit those instances so it conforms to the norm? Or is there away to modify the GREP expression ^.+?[.!] to also include other instance like the example below?
I alread try to add an additional rule using the Postive Look Ahead and nothing. And using the Any Uppercase Letter option, either forces the text back to the begining looking unstylized or it forces any capital letters to be bolded.
12/8-12/13 — WESTERN REIKI MASTERS: BE ATTUNED TO CARRY Japan’s Gendai Reiki lineage: Usui Mikao-Kan’Ichi Taketomi-Kimiko Koyama-Hiroshi Doi-Audrey Pearson. Learn to teach all 4 levels of Japan’s Gendai Reiki Ho. www.yogapathways.com. (508) 740-9870 or Facebook: ‘Gendai Reiki America’
11/23 — PSYCHIC AND HOLISTIC FAIRE at Women of Wisdom. North Easton, MA. Psychics, angel readings, mediums, crystal healings, Gaiadon Heart, chair massage, Reiki and more! Sign yourself up for a few appointments and bring your friends! www.womenofwisdominc.com (508) 230-3680.

[Integration Engine Configuration Data] Error: No access to system landscap

Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
     - We use http port for corresponding Integration Server.
     - Business System with role 'Integration Server' created correctly in SLD.
     - T-code SLDCHECK is all OK.
     - T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh Vo

Please can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283

Ack file date and time format is same as in source xml format

Hi...All,
1) my scenario is file-rfc-file using BPM,
we are getting file in xml format from source along with timestamp and this data will be going to R/3 and the acknowledgement (success or failure) file will be sending back to source system.
in this sceneario we have to fulfill in the follwing client requirement
File1.<same File1 date and time>.XML
Is it possible to make it as the following? if it is possible
could u please let me know how to fulfill the follwing requirement.
ACK File1.<same File1 date and time>.XML
Where <same File1 date and time> format = u2018YYYYMMDDhhmmssu2019 .
2) Is the XML file name visible in the SAP-XI monitoring screen and will it help to trace the messages?
thanks in advance,
Pasi.

Hi,
I didnot under stand your first question coulf you be more specfic.
2. Ans : In general , we will follow the below steps
--First we we check for the file is picked or no, if not see the Sender side CC parameters like mode and path details
--If file was picked then we need to check whether we are using the File content conversion parameters or not if yes we need to check the FCC parameters ,
Goto RWB-Channelmonitoring by the following link
http://host:port/mdt/channelmonitorservlet
select the sender side CC name and check for errors
If no errors in above, goto SXMB_MONI for Integration Engine xml processing , check for successful or error occured black or red color
--if success in SXMB_MONI then we need to check in RWB as above channel monitor now select the receiver side CC
If no errors then check for output file is placed intarget or not
Please reward points if it helps
Thanks
Vikranth

Use of interchangeability master data and RBA in GATP

Hi:
Has anyone tried the following using Interchangeability Master data and RBA?
1. Create a supersession chain. A-> B
2. Create a location substitution chain (loc_chain). L1 -> L2
3. Create a location determination procedure called loc_proc. Add to this the location substitution chain (loc_chain) created in the previous step.
4. In the Integrated rule maintenance, create a rule where you assign this location determination procedure loc_proc to the location determination procedure (INC MD).
Expected results:
I am expcting that the system should search for the following location products: 1) A-L1, 2) B-L1, 3) A-L2, 4) B-L2.
Actual Result: The system is only searching for 1) A-L1, 2) B-L1. That is, it is not using the location determination procedure.
Any thoughts on how I can debug this problem? Thanks.
Satish Vadlamani

Dear Satish,
in additon to the location determination procedure you have to create a product substitution procedure and assign your supersession chain to it. Then you have
to go to the rule maintenance, edit your rule and assign the product substitution procedure to your rule. This way both lists (the location list & the product list) will be taken into account when the rule is evaluated.
The way in which the both lists are combined are then set up in the rule control. There you have two options to choose from:
1) Combine locations with all products
If you choose this option, then in your case the result would be:
A-L1, A-L2, B-L1, B-L2
2) Combine products with all locations
In the case, the result would be:
A-L1, B-L1, A-L2, B-L2 (Your preferred result.)
Regards
Christian

Changing the Date and Time of photos

Hello,
i have been importing images from my windows machine and want all the dates to be correct, i have seen the adjust date and time, and made the changes but under the events the dates dont change and when i click individual photos the dates and times are not changing.
so i was wondering how do i change the time for each photo and event? can i change the time to a start and finish date rather than just one date?
Any help with the above would be much appreciated.
Thanks

I have just looked at this again, i dont see an option to set both a start and end date, any ideas?
That is not an an option - and it makes no sense
You can do one of three things:
1 - add a constant delta to all selected photos thereby correcting an incorrect setting on a camera and preserving the sequence and integrity of the photos dates ad times
2 - change the date and time for all selected photos to a specific value
3 - change the date and time for all selected photos to a base value plus an increment for each successive photo.
There are two choices under the photos menu
1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
2 - batch change date and time - this simply changes the date & time to your selected value with an option to add an increment to each
Both have an option to modify the original photo which I do (I'm not sure why you would not want to modify the original)
And when i go into photos, the ones that i have altered by +Photos >>> Adjust Date and Time+ still have different times and dates, any ideas?
AS described in the iPhoto help and above
1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
So after adjusting time and date all photos selected will have the time and date changed by the same amount (a constant delta) and if they were all different before they will still all be different - if they were all the same before adjustment they will still all be the same but at a different value
LN

Accessing sap tables data and display in webi

Hi all,
i installed business objects edge series.
i want to access SAP tables data and display in webi for adhoc reporting.
Is there any process to achieve this.

Hi
currently (April 2010) you have the following options:
1. You load your R/3 data into an SAP BW and use universes based on BEx queries to create WebI reports
2. You can use SAP rapid marts. They contain Data integrator mappings (you need an installation of the DI for this) to extract and load your SAP R/3 data into a relational database. Additionally they provide universes (based on a relational schema) hich ill allo you to build WebI reports.
3. You can use the R/3 connector for the Data Federator (You need a DF installation for this). Please note that the R/3 connector is not yet a product rather just a PROTOTYPE. Take a look here: SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken]
4. You can try to access the underlying database directly using the appropriate DB drivers. Please note that this is NOT RECOMMENDED. This way you cannot leverage security defined on the R/3 side in your WebI reports and you will not be able to access all data as available in R/3 since some of them are stored encoded/compressed in the underlying tables.
5. Instead of WebI you can use Crystal Reports and the R/3 drivers (eg. SAP Tables, Functions, Cluster) provided when installing the integration kit for SAP.
Regards,
Stratos

SiteMinder integration with the internal and external facing portals

Hi ,
We are in development phase for SiteMinder integration with the internal and external facing portals.The proposed dual authentication scheme which requires both SiteMinder for External facing portal (EFP) and LDAP for Internal portal .is it possible?
and is it possible to main to diff LDAP directories one is external users and one is for internal users.?
If you maintain 2 diff(external & internal) LDAP Directories in Siteminder Policy Server what about external users which are not exit in portal data source .
I appreciate if anyone can help me for my above query .
Regards
Tag

Hey Tag,
We do have a physical external Portal and a physical internal portal. The both the external and internal are connected to 2 LDAP directories.
For example the External Portal is connected to the Employee LDAP Direcotry and the Customer LDAP Directory. The Internal Portal is connected to the US Employee LDAP Direcotry and the EMEA LDAP Directory.
So each one of them is connected to 2 different LDAP Directories.
I believe that the Siteminder Policy is setup such that the Internal portal has a policy and the External portal has a seperate policy on the same Siteminder Server. Then each of the Policies is configured to connect to the approiate LDAP Directories.
You have to maintain the LDAP Directory information in both the portal and Siteminder Policy Server. It is required in the policy server so that it can authenticate the user and it is required in the Portal server so that it can authorize the user and display content based on thier assigned roles.
Hope that helps.
Regards,
Keith

MRP run - misalignment for planned order between Date and Production Date

Hi All,
We've just integrated SAP for a new plant.
The MRP runs based on Routing Lead Time for Make materials instead on Material Master Lead Time, for Capacity Assessment purpose.
When requirements dates lay in the past, MRP performs forward scheduling starting from current date and properly defines Production End Date according to Routing.
By checking MD04, for the proposed Planned Order, the basic date is same as Current Date (= same as Requirement Date) instead of being same as Production Date.
It works as it if checks stil the MAterial MAster LEad time instead of Routing. In fact if I updated the LT of MM the MD04 provides the right Date.
For future requirements, the MRP works properly, by having basic dates (both start and end date) aligned with Production Dates of Planned Order.
How can I do the alignment w/o updating In House Production LT?
Thanks,
D

Hi Caetano,
we have already done this configuration in OPU5 but it doesn't provide any benefit.
Below how we configured it:
Scheduling level: Via detailed scheduling
Adjust dates: adjust basic dates, adjust dep. reqmts to operation date
For capacity scheduling: Always basic dates, dep. reqmts to operation dates
Scheduling type: Backwards.
Regards,
D.

Integration of BW data and HCM

Similar Messages

Maybe you are looking for