Integration ps with co , mm and sd

hi sap gurs
where is the exactly integration ps with co , mm and sd.
can u explain this
regards
prasanthi

Hi,
Integration with CO : Certain types of GL acs are defined as cost elements, these can be seen in costing reports.
Costs incurred in project(actual), costs to be incurred(commitments),costs planned can be viewed as part of ps -co integration.
Result analysis wherein actual profits of projects, work in progress etc can be analyzed as part of ps-co integration.
Integration with SD:
Sales order is made in SD. WBS element from Project system is referred in the S.O line item. Milestones depending on payment terms with customers is defined in proj systems (eg : 10% advance, 25% after receipt of material) etc.. These milestones are copied to Sales order Billing plan and subsequent billing can be done.
Integration with MM:
Material masters are defined in MM, In MRP views if strategy 21 is given for finished product, same matl is attached in proj structure, finished product can be produced using movement 581q.
Simimarly procurement type and special proc key decide the type of procurement.Also individual collective indicator in MRP views decide whether the matl would be in plant or project stock. MRP type decides whether requirement would be generated after running proj MRP. Similarly costing and accounting views decide the cost(value) that will hit the project when material is received /consumed..

Similar Messages

Any kind of integration experience with Weblogic JMS and Oracle AQ?

Hi,
In my company I work with java developers who believe in some kind of "holly" database independence I don't understand and as a result my life as a database developer is hell on earth.. Yesterday we again started to discuss, this time where to log, they believe database is slow and prefer logging to filesystem, after some hours finally I could convince them for some operational and reporting needs to use the database and will do this in an asyncronous way whiich they won't get slow. After all I believe the reason for a database is data, this is the place where data lives, and with the correct desing and implementation logging to database would perform better.
I love Oracle features, and know that we paid a lot for this software, so today I started investigating this promised solution. And quickly I found AQ and JMS topics in the documentation :)
After this introduction here is my problem; my company use BEA Weblogic as application server and the java guys want AQ to automatically (but of course with some delay) take their JMS log requests into database tables. Does any one have similar application experience, or any kind of integration experience with Weblogic JMS and Oracle AQ?
Any comments, references, documentation, sample code, url will be most welcomed :)
Thank you very much!
Tonguc
[email protected]
References I found upto now;
Oracle® Streams Advanced Queuing Java API Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14291/toc.htm
(Packages; javax.jms & oracle.jms)
Oracle® Streams Advanced Queuing User's Guide and Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14257/toc.htm
Part IV
Using Oracle JMS and Oracle Streams AQPart V describes how to use Oracle JMS and Oracle Streams Advanced Queuing (AQ).
Chapter 11, "Introducing Oracle JMS"
Chapter 12, "Oracle JMS Basic Operations"
Chapter 13, "Oracle JMS Point-to-Point"
Chapter 14, "Oracle JMS Publish/Subscribe"
Chapter 15, "Oracle JMS Shared Interfaces"
Chapter 16, "Oracle JMS Types Examples"
A Sample Code from Otn
http://www.oracle.com/technology/sample_code/tech/java/web_services/jmsws/NewsQueueEJB.java.html

I wouldn't go as far to say Oracle AQ is out-dated today. However, it is indeed a proprietary technology that did not found much main-stream adoption in the earlier years after its introduction. The advent of JMS made it somewhat more useful (or should I say intriguing, because more people are trying to tie it together with other J2EE technologies), but the Oracle's JMS wrapper classes in aqapi.jar were not feature complete for a long while, so using it outside Oracle's application server was painful, if not impossible. I do agree that the info at the dev2dev's JMS newsgroup or in this forum is highly fragmented, as neither Oracle nor BEA provides an official solution to integrate AQ with WebLogic, so people like us have to learn the technology through experimentation and in a piecemeal fashion.
3 years ago I was literally "playing around" - we had a polling mechanism set up to use triggers to write Oracle data changes into an event table, and had a Java-based daemon to scan that table and publish events as JMS messages to the WebLogic JMS server. This continues to work reliably till today, but I was looking for a solution that has few parts - I wanted to hook up my WebLogic MDB directly to AQ as a foreign JMS provider. Although I was able to get it to work (including XA), there were a few hoops I had to jump through, such as decompiling the Oracle AQjms classes to make them bind to the WebLogic JNDI tree.
One year after that Diptanshu Parui took what I did a giant step further - he extended the Oracle AQjms classes to allow them to be bound to the WebLogic JNDI tree naturally, and he figured out how to use WebLogic JMS messging bridge to re-send single-threaded AQ JMS messages to clustered JMS queues, which allow concurrent message assumption by multiple instances of MDB's. My impression is that he is using that setup in a production environment.
I am sure you are aware of it but I would like to make it clear - in order to use AQ as a foreign JMS provider to WebLogic-hosted MDB's, you don't need to update your database to Oracle 10g - Oracle 8i is good enough (although I recommend at least 9i Release 2). It is not the database engine, but rather the aqapi.jar JMS wrapper on top of AQ that matters. I do recommend that you use aqapi.jar from Oracle Application Server 10.0.3 or up for better XA support, among other things. Again, you don't have to replace WebLogic with Oracle AS - you only need a single jar file from it and put it in your WebLogic's classpath. However, I don't know what this means from a licensing point of view if you ever go to production - do you have to pay the full price of OracleAS or OC4J just to use the aqapi.jar?
In the coming days I will test the latest aqapi.jar to see how much progress Oracle has made in terms of making their J2EE products more spec-compliant :-).
Hope the above gives you a different perspective.
Eric

Unable to login into EBS and OID after integrating OID with EBS successfull

Hi,
We have succcessfully Integrated Oracle 11i with OID (OAS 10g) as per the note 233436.1, but we are not able to login thru EBS other then sysadmin user. At present no one is able to login through OID and EBS.
Regards,
Maggi.

Hi Helios,
Thanks for your reply, We have integrated OID with Microsoft AD and OID with EBS. When we try to create new users in both OID it was reflecting properly in EBS and even vice versa. But when we migrated the users between EBS to OID and vice versa using bulkload it completed sucessfully. Now at present we are not able to long through both OID and EBS. When ever we try to login, it asks for windows authentication by poping up a window asking for Username/Password.
Thanks,
Maggi.

Integration CUCM with MCU Cluster, TCS and TMS

Hi all,
Do you have any guides, information and suggestions about integrating CUCM with MCU, TCS and TMS?
To centralized IPT and Video Conference enviroment, i need to register MCU and TCS to CUCM v10.5.
Also TMS should provision devices which are register to CUCM.
Best Regards,
Mesut

Hi Mesut,
You can refer below support forum links:
https://supportforums.cisco.com/discussion/11281276/cucm-cts-and-tms-integration
https://supportforums.cisco.com/discussion/11587226/registering-mcu-cucm-86
Regards
Sumeet

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Integration steps with MM and SD in Parallel Ledger

Hello Experts,
What are all the integration configuration steps between FI and MM / SD for updating the logistic transaction under Non-Leading Ledger?
Also, guide me does the material ledger works for Non-Leading ledger transactions?
Regards
Anilkumar

Please note that non-leading ledgers will just have General Leder postings; they cannot have any sub-ledger postings. So your FI integration with SD/MM will be only at the leading ledger level.
I do not know about material ledger, but again your non-leading ledger does not have sub-ledger, so you cannot post to a material in a non-leading ledger; all your non-leading ledger postings are at the general ledger level.

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Integration of outlook express with R/3 and Portal

Hi,
I have seen a new system setup where we can assign security group to a user in Outlook express and it will give some authorization in R/3 and Portal. I am first time seeing this concept .Can anybody pls explain me how to create the security group in outlook express and method of integrating it with both R/3 and Portal.
I appreciate all your help.
Thanks in advance

Hello Daniel,
You can look on help.sap.com for some pointers on this.
Here is a good link to start with:
http://help.sap.com/saphelp_nw70/helpdata/EN/48/05c93e4af7664ee10000000a114084/frameset.htm
Regards,
Siddhesh

Outlook express integration with R/3 and Portal

Hi,
I have seen a new system setup where we can assign security group to a user in Outlook express and it will give some authorization in R/3 and Portal. I am first time seeing this concept .Can anybody pls explain me how to create the security group in outlook express and method of integrating it with both R/3 and Portal.
I appreciate all your help.
Thanks in advance

Hi ,
Thanks for the link..
but its not the one I have been looking for ragarding the mentioned scenario.
!)A User will be present in both outlook express and SAP system ,when we add a security group (SG *) in outlook expressthe user will get authorization on Portal screen.
2) After assigning a role in R/3 ,we should add the security group to that use for some access permission.
Could u pls explain me how the concept could be and Integration method.
Thanks in advance
I appreciate all your help.

SiteMinder integration with the internal and external facing portals

Hi ,
We are in development phase for SiteMinder integration with the internal and external facing portals.The proposed dual authentication scheme which requires both SiteMinder for External facing portal (EFP) and LDAP for Internal portal .is it possible?
and is it possible to main to diff LDAP directories one is external users and one is for internal users.?
If you maintain 2 diff(external & internal) LDAP Directories in Siteminder Policy Server what about external users which are not exit in portal data source .
I appreciate if anyone can help me for my above query .
Regards
Tag

Hey Tag,
We do have a physical external Portal and a physical internal portal. The both the external and internal are connected to 2 LDAP directories.
For example the External Portal is connected to the Employee LDAP Direcotry and the Customer LDAP Directory. The Internal Portal is connected to the US Employee LDAP Direcotry and the EMEA LDAP Directory.
So each one of them is connected to 2 different LDAP Directories.
I believe that the Siteminder Policy is setup such that the Internal portal has a policy and the External portal has a seperate policy on the same Siteminder Server. Then each of the Policies is configured to connect to the approiate LDAP Directories.
You have to maintain the LDAP Directory information in both the portal and Siteminder Policy Server. It is required in the policy server so that it can authenticate the user and it is required in the Portal server so that it can authorize the user and display content based on thier assigned roles.
Hope that helps.
Regards,
Keith

Communication Channel - Integrating with existing iMS52 and iDS52

Hi,
Any one tried integrating Portal Server JES2004Q2 channels with existing iMS52 and iDS52?
How about schema? Did you use the existing Dir for configuration? Please share, as at the moment we are encountering problems even installing it. Anyway that's a different story.
Regards,

Use Runtime Workbench -> Component Monitoring -> Communication channel monitoring
U could not start or stop individual communication channel through Visual Admin. U can start or stop whole adapter through it.
Regards,
Prateek

Online file storage with access control and file manager integrated to APEX website

I have APEX 4.2 website with few user accounts. I would like to share approximately 100 GB of documents to users. Some documents will be public (in some public folder) and everyone with account in my website will be able to download that public files. And some files/folders will be with restricted access and only user with appropriate credentials will be able to download it.
I would like to find some cheap cloud file storage.
Some storage that offers plugin/component = file manager that will be integrated to my APEX website and authentication will be transparent to my users (authentication with some API or URL). Every user will see only his files. I want some ready to use component and call only minimum API.
I would like to integrate that storage to my website or call some user specific URL and redirect my user to some page with file manager.
All files will be read only for all users.
Thanks for some tips

what will you be using for your file manager? Or do you even know yet?
I do not have tons of experience but if I had to come up with a solution I would build the interface with APEX and use the database to store the files inside so you can control access.
You can create a procedure that takes in parameters like username, session id, encrypted session id from the browser cookie and either return the file or give the user an error message letting them know they arent authorized. You could use plugins to give the users a better file managing experience like the 'multiple file upload' plugin that allows AJAX based multiple file uploading.
Id put this on an amazon EC2 cloud micro instance. It's uber cheap.

What are the integration points with sd and qm

hi,
sap gurus,
good morning to all,
what are the integration points with SD and QM.
in r/3.
regards,
balaji.t
09990019711

Dear balaji
Before doing PGI, there will be a preinspection stage where SD will have to integrate with QM. Similarly after sales, whenever there is sales returns, QM will come into picture.
To control the above scenarios, in material master, go to "Quality management" view and click on "Insp.setup" where you need to assign Inspection Types like 04, 06 etc.
thanks
G. Lakshmipathi

PPDS integration with DP,SNP and GATP

Hi,
Can anybody provide details for integration of PPDS with DP, SNP and GATP
Thanks
suresh

Hi,
Integration with DP
Transfer of PIRs to PPDS
Integration with SNP
This plan should ensure that the required product quantities in your supply chain are available at the right place, at the right time, without overloading bottleneck resources for production and transportation.
Convert SNP receipts into PPDS Receipts
Integration with GATP
CTP and MATP generate Procurement proposals to PPDS
Thanks
sreeni

Cisco BE6k with CUCM 10.X integration with Siemens with Hipath 3350 and 3550

Dear Experts;
We have one requirment from customer.
They have 4 branches with Siemens Hipath 3350 and 3550 PBX and they want to integrate with cisco CUCM 10.x.
The Head Quater with complete CUCM as IPT and branches with with Hipath 3350 and 3550 PBX.
CIsco TAC says interoperability doc is not available and also I can see tehre is no doc.
TAC Reply As below.
We do not have any documents about CUCM integration with Hipath 3350 and 3550 on our interoperability portal. This means that their integration with CUCM was never properly tested. So we can not confirm that all features will be working. But from CUCM perspective this is third-party device that can be integrated using SIP or ISDN (with Voice Gateway between them).
Link for interoperability portal:
http://www.cisco.com/c/en/us/solutions/enterprise/interoperability-portal/networking_solutions_products_genericcontent0900aecd805b561d.html#callmgr10
Regards
Debashis

If the Siemens supports SIP or H323 you can attempt to simply create a trunk between the systems and route calls via it. If IP integration is not an option then as pointed by TAC integrate via PRI circuit (preferably QSIG). From CUCM side it will be just another GW, similarly from Siemens side. You'll need to select which side is going to be ISDN network (I always use Cisco side) and then make the other side user.

Integration ps with co , mm and sd

Similar Messages

Maybe you are looking for