Integration via Services

I will make an integration between an ERP system and a WMS.
This integration will be made via services, or when I need to send information from ERP to WMS, the ERP will draw on my ALDSP a service that will map the parameters of the Webservice (XSD) that were sent by the ERP to the fields of WMS, which in the case will be a Procedure.
I wonder what is the best way to map the fields of XSD for the fields of procedure, I know I have to use xQuery, but I use logical data services or models for this? I need also to do some testing before calling the procedure, such as whether a field has size X, if not, I trunc it.
What would be the best way that I do this with Data Services? The reverse also happens.

Hi Daniel,
please look into the AC 5.3 Configuration Guide, there you will find all web services available for AC.
But the web services were designed for a direct integration to an ID Management system so you have to check yourself if these web services will help you.
Best,
Frank

Similar Messages

  • ERP-integration via middleware

    Hi,
    It is possible to create a wbs-element for a campaign element without creating a wbs-element for the campaign when using ERP integration via middleware (automatic on releasing)? We are in addition using the badi for checking on campaign type and tactic.
    Regards Camilla

    Hi,
    would not think that they actually need access to your production systems but rather a replica that is as close as possible in all aspects. If access to the production system is required, then set up a totally read only groups and assign the individual integrators to those groups.
    There are a couple of ways that the issue of responsibility for interfaces/integration can be handled.
    One is to have the Implementer agree to provide the services to do the analysis (requirements and functional) and then to develop, test and resolve any issues from the tests. However, this will require that they be come "experts" in your legacy system and add to the total cost of the implementation of the ERP.
    Another is to have your internal IT Department take on the management of this part of the project to include analysis (requirements and functional) and then to develop, test and resolve any issues from the tests. There are some benefits to this. First they have the expertise in the legacy system and second, it will allow them to learn the ERP system more intimately and provide the opportunity to become experts there as well. Some drawbacks may include the learning curve for the new system and its technologies (this can be remedy by bringing in short term technical consultants that have experience in the technologies to help during the development of the interfaces/integrations and provide "training").
    One other way is to just bring an "integrator". But, again, the integrator may need to become experts in both systems and this adds a little more to TCO.
    No matter what you, or your company, decides to do, remember, the more you do up front (analysis and design) the less that needs to be done on the back side (development and testing) and the easier the project will go.
    Reward points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • C4C & Lotus Notes integration for service users

    Hi,
    I tried to find information about C4C and Lotus Notes integration for service users without success. User manual says on Sales both Outlook and Notes, but in Service only Outlook. Does Lotus Notes add-in work for service users similar than sales users? Is there anywhere demo video for that? I can only found demo video for sales (SAP Sales OnDemand Outlook Integration Demo (new) - YouTube).
    -Aatos

    Hi Aatos,
    The Lotus notes integration currently supports the "Field Service" role in Cloud for Service where you are primarily servicing customers in the the field and have direct email communications with your customers. In this use-case, similar to "Field Sales" (AKA SFA Users) in Cloud for Sales, you can receive an email from a customer, get information about that customer from Cloud for Customer via the Lotus Integration, and be able to upload that email into Cloud for Customer as an email activity to track the email correspondence between the user and the customer.
    However, the Lotus notes integration does not support the "Call Center" role in Cloud for Service where you are a contact center agent in a centralized service center processing emails that are routed into a common inbox and all correspondence is sent out in behalf of a central inbox such as [email protected] In this usecase all emails automatically create tickets and all emails both inbound and outbound are automatically recorded as email activities without customer or user intervention. The email client for this usecase is either a C4C email client or Windows Outlook Client as you found in the documentation.
    Thanks,
    Rei

  • Automatic creation of Service PO via Service PR

    Dear Friends,
    We want to create Service PO automatically via service PR generated in PS module using account assignment category Network and service conditions per plant/ POrg/ vendor combination.
    What are prerequisities and settings required to create PO automatically?
    Please give your inputs.
    Regards
    Ram

    Dear,
    For Automatic PO with PR(Individuals) Settings
    1) Both in Vender master &  Material Master in purchase view check the ckeckbox as automatically PO.
    2) Maintain Purchase Info Via ME11 with price and conditions and also Validty.
    3) Maintain Source List ME01.
    4) ME59N  make Auto PO but remember that Other Conditions like Packaging & Forwrding or Fright charges you have to maintain Manually.
    other way
    Go to Document Overview in ME21N, select the PR and Adopt and maintain all the Rates & other condition.
    May this help u
    Regards,
    Pardeep Malik

  • Where is the integrated administration service for VO 1.6.1?

    I am unable to find in docs or elsewhere where the integrated admin
    service is. When I do server/vo I am automatically at the user portal,
    but nothing is working there because I presumably need to turn it on.
    When I log in to the admin page, even using the admin login, I'm told
    I'm logged in as myself and can't do a lot because I'm "not a portal
    administrator".
    This is VO 1.6.1 installed on NW65SP6 from the overlay CD.
    Ken McLeod
    The Delphian School
    http://www.delphian.org

    Thanks. I was able to get this set up right by loggin in to the client
    as "admin" and making myself a VO admin. It works fine in any of the
    browsers. -- Ken
    [email protected] wrote:
    >> When I log in to the admin page, even using the admin login, I'm told
    >> I'm logged in as myself and can't do a lot because I'm "not a portal
    >> administrator".
    >
    > Does the machine you are using to access VO have the novellclient
    > installed? If so, try using Firefox or a machine without the client
    > software installed. The NMAS part of the Novell client has a tendency to
    > tell IE who is currently logged on, and IE passes that on to VO.
    >
    > Once you are logged on properly, the administraqtor functions will be
    > available in the left hand frame of the main page.

  • After upgrade to iOS 7.1 calendar integrated via caldav is no longer available

    Hi,
    We use several iOS devices in my family and we share a calendar sitting on our home NAS (Synology). The calendar is integrated via 'caldav'.
    This worked fine for a long time (also using the latest iOS 7.0x versions).
    However, after upgrading the devices to iOS7.1 we have one iPhone5 that no longer shows the shared caldav calendar. In setting the calendar shows up and the connection can be validated successfully. However, the calendar app does not show this shared family calendar. As it would not have been configured.
    On the other devices the calendar works fine.
    The phone not showing the calendar is also syncrhonized with an additional MS Exchange calendar. This still works fine. I mentioned it because this is something that is different compared to those devices that still show the shared caldav calendar.
    Does anybody has an idea about how to fix this situation?
    Is there any workaround to make the configured, shared caldav calendar visible in the calendar app?
    Regards,
    Martin

    Update:  This was caused by a hardware failure of the Touch ID and just happened to coincide with when I did the update.  Got my phone exchanged today and everthing is working properly. 

  • Sharepoint/Project Enterprise 2010 Integrated Reporting Services SQL 2008 R2

    We have integrated Reporting Services in to SharePoint 2010 configured in Trusted.
    Problem:
    on a BI site we have a report that runs just fine when you click on it.  however when you click the dropdown arrow and edit in reportbuilder. It will open report builder 3.0, but not the report you wanted to edit.  when you go to Open the report
    from the site we get the error
    Unable to connect to the server that is specified in the URL. "myspsite url" Make sure that the server is running, the URL is correct, and you have permission to use the server.

    Hi
    Damon ,
    Thank you for your posting!
    For your issue, please format the URL used to connect Report Server as “http://server/reportserver/”
    (with '/' in the end).
    Reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2a5e9945-e3ac-41e7-a50d-772b3cc68f93/report-builder-30-unable-to-connect-to-server?forum=sqlreportingservices
    Thank you for your understanding and support.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Integration of service processing with warranty claims node not appearing

    Dear experts,
    Plant Maintenance and Customer Service => Maintenance and Service Processing => Integration of Service Processing with Warranty Claims
    Integration of service processing with warranty claims node not appearing in SPRO.We are using ECC 6.0.How should we get this node?
    regards,
    ashraf

    Hi,
    It will not be in core solution. As far as I know you need Aerospace & Defence solution (DIMP) for this functionality.
    -Paul

  • Farm Recovery Planning: How to restore existing SharePoint Integrated Reporting Services Databases?

    Sorry in advance for cross posting, but the Forum Admin for "SharePoint 2010 - Setup, Upgrade..." recommended I post this here as well.
    Running "SharePoint 2010 SP1" and "SQL Server 2012" Integrated Reporting Services.
    Assuming a total Farm failure requiring a new farm to be built, does anyone have any experience with restoring the 3 SharePoint Integrated SSRS databases to a the new farm from SQL Server level backups?  Assuming of course the SSRS encryption key had
    been exported.  Many of the Service Applications can be provisioned with "pre-existing" restored service application databases (like the User Profile Service and Metadata Service databases).  Just wondering if this can also be done with
    the SharePoint Integrated SSRS databases.
    The following Microsoft Document on setting up a SP DR site implies it's possible since the 3 databases are synced to a separate DR farm.
    https://view.officeapps.live.com/op/view.aspx?src=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2FD%2F2%2F0%2FD20E1C5F-72EA-4505-9F26-FEF9550EFD44%2FPlanning%2520Disaster%2520Recovery%2520for%2520Reporting%2520Services%2520in%2520SharePoint%2520mode%2520.docx
    Is this possible?  Does any one have any actual experience with this, and what the steps would be?
    Thanks!

    Hi mikea730,
    It supposed to be possible. Please refer to the blog below:
    http://blogs.technet.com/b/ptsblog/archive/2014/01/28/sla-and-disaster-recovery-planning-for-microsoft-busincess-intelligence.aspx
    Best Regards,
    Black

  • Integration Server Service 9.3.1 (EIS) entering a stopped state

    Integration Server Service (EIS) is stopping multiple times during the day and sometimes during the nightly processing. There seems to be no reason to when or why it stops. Sometimes users may be running drill through reports, sometimes no one is. We don't have that may users that have access to the system for drill through so volume shouldn't be a problem.
    I have looked in the OLAPISVR log around the time the service stops, but the log has no error or anything in it about why it stops. It has the statement from whatever the last user is logged was doing and then the next statement is where the service is starting back.
    On 7/16/08 the service stopped at 2:56:02. I started the service back at 2:57:09. I had 4 users log on and run drill through reports to make sure it was back up. They ran the reports fine. That was around 3:05. The service went back down again at 3:09:16. This has been going on for about a month. But users have had access to the system for only 2 weeks.
    This is the version we are running 9.3.1.0.0 Build-AIS93100B113.
    Any help would be appreciated.

    The user is requesting too much at one time.
    The query compiles long IN lists and stops the server.
    There is the ability to regulate the depth of the query in the report, but the Excel user can still drag a range and drill thru on too much data.

  • Cannot view workflow log via Services for Object Workflow Overview

    We recently had an upgrade of R3/ECC and discovered a new issue.  For some reason we can no longer view workflow log via Services for Object > Workflow Overview for Material Master (transaction MM03).  We get the message "There are no workflows that have already worked with this object".  However, we have confirmed via SWEL and other t-codes that the workflow and log do exist.  This seems to be the only object we have this issue for after the upgrade.
    Anyone know what issue is and how to fix?   Or at least path to config in SPRO for "generic object services" where we can see if anything changed via upgrade for this object?
    Thanks,
    Matt
    Edited by: Matthew Huth on Apr 22, 2008 9:23 PM

    Found the solution.  See OSS note 553246.  This has been tested and works for us.   -Matt
    Note 553246
    Summary
    Symptom
    In the material master, the system no longer displays the attachments for the material or workflow items in the Generic Object Services.
    Other terms
    MM01, MM02, MM03
    Reason and Prerequisites
    As of Release 4.6B, business object BUS1001006 is valid for the material master. Until you have implemented Note 452424, the Generic Object Services is still published for the old BUS1001 business object. After implementing the note, all attachments, relationships, notes and workflow items that are assigned to business object BUS1001 are no longer displayed.
    Instead, all new attachments are assigned to business object BUS1001006. As a result, attachments cannot exist for both systems.
    For workflow items, the assignment to the business object occurs in the respective tasks. It may be very time consuming to convert the business object, depending on whether an individual subtype (assigned to BUS1001) is created.
    In other words, after you implement the note, the workflow items for business object BUS1001 can no longer be displayed in the material master.
    Solution
    With the following correction you can call the Generic Object Services for both business objects. When it is called, the system displays a dialog box in which you can choose the required business object, that is, BUS1001 ('Material') or BUS1001006 ('Standard material').
    This correction is delivered as a modification supported by SAP only. This is because the additional option means that attachments can be maintained as required in either of the business objects and users may therefore require extra training.
    However, the corrections enable you to display attachments and workflow items for both business objects without the need for a major conversion; this means that you do not get the impression that these have been lost.
    Alternatively, as of Release 4.70 (or Basis 6.20) you can, without making a modification, implement method ADD_OBJECTS of BAdI GOS_MULT_PUBLISH for filter attribute WF_OVERVIEW ('Workflow overview'), SRELATIONS ('Relationships') and VIEW_ATTA ('Attachment list'). The implementation should be similar to the following:
    METHOD if_ex_gos_mult_publish~add_objects .
      DATA:
        ls_lporb TYPE sibflporb.
      READ TABLE ct_lporb INTO ls_lporb INDEX 1.
      if ls_lporb-typeid = 'BUS1001006'.
        ls_lporb-typeid = 'BUS1001'.
        append ls_lporb to ct_lporb.
      endif.
    endmethod.

  • [svn:fx-3.x] 7177: Bug: BLZ-192 - Channel. requestTimeout cannot be set via services-config.xml

    Revision: 7177
    Author:   [email protected]
    Date:     2009-05-21 07:56:59 -0700 (Thu, 21 May 2009)
    Log Message:
    Bug: BLZ-192 - Channel.requestTimeout cannot be set via services-config.xml
    QA: Yes
    Doc: Yes
    Details: This is only the client side of the fix.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-192
    Modified Paths:
        flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/messaging/Channel.as

    Revision: 7177
    Author:   [email protected]
    Date:     2009-05-21 07:56:59 -0700 (Thu, 21 May 2009)
    Log Message:
    Bug: BLZ-192 - Channel.requestTimeout cannot be set via services-config.xml
    QA: Yes
    Doc: Yes
    Details: This is only the client side of the fix.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-192
    Modified Paths:
        flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/messaging/Channel.as

  • Can I use RS.exe to create the folders in Sharepoint-Integrated Reporting service?

    Hello All,
    Recently, I am using rs.exe and .rss files to publish my reports to SharePoint-Integrated Reporting Service.
    The outstanding issue is, it cannot create non-existing folders for me automatically. I have to created the folder manually.
    Thinking BIDS "Deploy" function can make folder creating happen, why the RS.exe doesn't support so?
    Does anyone know how to change .rss and rs files to make folders creating automatically. 
    E.g. If I pass in "ParentFolder" and it doesn't exist on SharePoint, then RS.exe can create the folder first then deploy the RDL files under that folder.  
    Derek

    Hi Derek,
    In SSRS, we can use .rss files to publish our reports to a new folder. Please refer to the following script:
    Dim definition As [Byte]() = Nothing
    Dim warnings As Warning() = Nothing
    Dim destinationFolder As String = "DemoReports"
    Dim reportsTargetPath As String = "/" + destinationFolder
    Dim reportsSourcePath As String = "C:\Demo"
    Dim datasourceName As String = "DataSource1"
    ‘Create the destination Folder
    Try
    rs.CreateFolder(destinationFolder,”/”, Nothing)
    Console.WriteLine("Parent folder {0} created successfully", destinationFolder)
    CreateReportDataSource(datasourceName, "SQL", "Data Source=.;Initial Catalog= AdventureWorksDW2012")
    Catch e As Exception
    Console.WriteLine("Tasks completed successfully.”)
    End Try
    You can refer to the script in the following blog.
    http://sqlserverselect.blogspot.in/2010/10/rsexe-and-rss-scripts-for-automation-of.html
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • Integration of services

    I just wanted to give some feedack on what seems to be a lack of integration of services being provided by HP. I am not sure why people with carepaq warranty can't use the chat feature or why support people can't locate carepaq registration. Clearly the left hand doesn't talk to the right hand but it is more than frustrating considering one has paid the premium price for more than a standard warranty.
    Why wouldn't HP put HELP in the chat with a support feature? I know I have a warranty but HP chat doesn't think so. So I am stuck having to call each time? I have found the same to be true with regards to the check warranty status feature as well.
    HP should provide a separate or alternate method for carepaq customers like they used to do a few years ago. You are INVENTING  backwards!

    Welcome to the HP Consumer Support Community.
    This feedback forum is specifically for feedback about the HP forums.  This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. If you have additional or direct feedback for HP about their products or services, please use the link below.
    http://welcome.hp.com/country/us/en/wwcontact_us.html
    If you have other questions and concerns about using the forum, please feel free to send me a private message.
    Thank you.
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • Manage accounts via services

    Can I manage the accounts via PHP?
    I need access for example to application montly limit, usage, and I would like to create applications, rooms on the fly.
    Can I get the list of available functions via service?
    Thanks!
    Tamas!

    I forgot this:
    I need access to the dev portal via services (https://portal.collaboration.adobelivecycle.com/), but not only to room create function. I need mostly the usage ($) of applications. Have I any chance access to this?
    This function is very important for me!
    Thanks!
    Tamas!

Maybe you are looking for